667338
36
Verklein
Vergroot
Pagina terug
1/290
Pagina verder
0478 192 9807 C - EN
34
MT 5112 C, MT 6112 C, MT 6112 ZL,
MT 6127 ZL:
With the mowing deck removed, press
the V-belt tensioner lever forwards and
lock in place. (Ö 14.1)
Start the engine. (Ö 13.2)
Forward driving:
Select the forward driving
direction. (Ö 8.9)
Disengage the parking brake, if
engaged. (Ö 8.14)
Actuate the drive pedal – the machine
moves forwards. (Ö 8.12)
Reversing:
Select the reverse driving
direction. (Ö 8.9)
Disengage the parking brake, if
engaged. (Ö 8.14)
Actuate the drive pedal – the machine
moves backwards. (Ö 8.12)
Forward driving with cruise control
(MT 6112 ZL, MT 6127 ZL):
With the mowing deck removed, press
the V-belt tensioner lever forwards and
lock in place. (Ö 14.1)
Start the engine. (Ö 13.2)
Set the throttle lever to the MAX
position. (Ö 8.3)
Set the driving direction selector lever
to the front position (forward driving
direction). (Ö 8.9)
Disengage the parking brake, if
engaged. (Ö 8.14)
By pressing the drive pedal, the driving
speed is regulated and the machine
moves forward.
Activating cruise control:
Maintain the required driving speed and
press the cruise control button for 1
second. (Ö 8.7)
Cruise control is activated when the
"cruise control active" symbol appears
on the display and the drive pedal is
locked in place.
When cruise control is activated, it is
possible to increase the set driving
speed by pressing on the drive pedal.
The foot can be removed from the drive
pedal.
Deactivating cruise control:
Actuate the brake pedal or press the
cruise control button. (Ö 8.7)
Cruise control is deactivated when the
"cruise control active" symbol
disappears from the display.
13.5 Braking
Reduce the driving speed by easing the
pressure on the drive pedal – avoid
braking abruptly at the maximum
driving speed. (Ö 8.12)
Press the brake pedal down evenly until
the machine comes to a
standstill. (Ö 8.13)
13.6 Adjusting the cutting height
Brake the machine to a complete
standstill.
Release the cutting height adjustment
lever and set the required cutting
height. (Ö 8.15)
13.7 Mowing
Before mowing:
Read and observe the section "Notes
on working with the machine". (Ö 11.)
Always set the maximum engine speed
during mowing. The mowing blade is
optimised for this speed – it produces
the best cutting pattern as well as the
most powerful suction effect for
collection of the clippings.
Engage the mowing deck in the
following sequence:
Start the engine. (Ö 13.2)
Set the throttle lever to the MAX
position. (Ö 8.2), (Ö 8.3)
Risk of injury!
Adjust the cutting height only when
the ride-on mower is at a standstill.
Level 1 Lowest cutting height
Level 8 Highest cutting height
MT 5112 Z, MT 6112 C,
MT 6112 ZL, MT 6127 ZL:
VIKING recommends mounting the
two gauge wheels in a lower bore.
In the lowest position, the gauge
wheels increase the distance
between the mowing deck and the
ground, ensuring an optimum
supply of air. The result is a more
attractive cutting pattern and better
collecting performance.
If the mowing deck is engaged
when driving, the engine speed is
briefly reduced due to the additional
load (mowing blades starting to
rotate).
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Viking MT 6127ZL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Viking MT 6127ZL in de taal/talen: Engels, Portugees, Spaans als bijlage per email.

De handleiding is 24,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Viking MT 6127ZL

Viking MT 6127ZL Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano - 284 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info