Handleiding Viewsonic pj 1158 (pagina 106 van 115) (Engels)

214624

106

Verklein

Vergroot

Pagina terug

1/115

Pagina verder

PJ1158

LCD Projector

ViewSonic

Model No. : VS11459

- User Guide

- Guide de l’utilisateur

- Bedienungsanleitung

- Guía del usuario

- Guida dell’utente

- Guia do usuário

- Användarhandbok

- Käyttöopas

-Руководствопользователя

使用手冊

iViewSonic PJ1158

Compliance Information

For U.S.A.

This device complies with part 15 of FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.This equipment

has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modifications not expressly approved by the party

responsible for compliance could void your authority to operate the equipment.

For Canada

• This Class B digital apparatus complies with Canadian ICES-003.

• Cet appareil numérique de la classe B est conforme

à la norme NMB-003 du Canada.

CE Conformity for European Countries

The device complies with the requirements of the EEC directive 89/336/EEC as

amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic

compatibility”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to

“Safety.”

Following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and Electronic

Equipment Directive 2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment as unsorted

municipal waste, but use the return and collection systems according to local law.

iiViewSonic PJ1158

Important Safety Instructions

1. Read these instructions completely before using the equipment.

2. Keep these instructions in a safe place.

3. Heed all warnings.

4. Follow all instructions.

5.  Donotusethisequipmentnearwater.Warning:Toreducetheriskofreorelectricshock,do

not expose this apparatus to rain or moisture.

6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in this

guide for further instructions.

7. Do not block any ventilation openings. Install the equipment in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices

(includingampliers)thatproduceheat.

9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade and the third prong are provided for your

safety. If the plug does not fit into your outlet, consult an electrician for replacement of the

outlet.

10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the

point where if emerges from the equipment. Be sure that the power outlet is located near the

equipment so that it is easily accessible.

11. Onlyuseattachments/accessoriesspeciedbythemanufacturer.

12.

Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the equipment. When a cart is used, use caution when

moving the cart/equipment combination to avoid injury from tipping over.

13.

Unplug this equipment when it will be unused for long periods of time.

14.  Referallservicingtoqualiedservicepersonnel.Serviceisrequiredwhentheunithasbeen

damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled

onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not

operate normally or has been dropped.

iiiViewSonic PJ1158

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC of the

European Parliament and the Council on restriction of the use of certain hazardous substances in

electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum

concentration values issued by the European Technical Adaptation Committee (TAC) as shown

below:

Substance

Proposed Maximum

Concentration

Actual Concentration

Lead (Pb)

0.1% < 0.1%

Mercury (Hg)

0.1% < 0.1%

Cadmium (Cd)

0.01% < 0.01%

Hexavalent Chromium (Cr

) 0.1% < 0.1%

Polybrominated biphenyls (PBB)

0.1% < 0.1%

Polybrominated diphenyl ethers (PBDE)

0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex of the RoHS

Directives as noted below:

Examples of exempted components are:

1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not

specicallymentionedintheAnnexofRoHSDirective.

2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic

ceramic parts (e.g. piezoelectronic devices).

Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).

4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing

up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.

ivViewSonic PJ1158

Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft

Corporation in the United States and other countries.

ViewSonic, the three birds’ logo, OnView, ViewMatch, and ViewMeter are registered trademarks of

ViewSonic Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC

are trademarks of VESA.

PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation.

Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions

contained herein; nor for incidental or consequential damages resulting from furnishing this material,

or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to

change product specifications without notice. Information in this document may change without

notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose

without prior written permission from ViewSonic Corporation.

Product Registration

To meet your future needs, and to receive any additional product information as it becomes

available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic

Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may

mail or fax to ViewSonic.

For Your Records

Product Name:

Model Number:

Document Number:

Serial Number:

Purchase Date:

PJ1158

ViewSonic LCD Projector

VS11459

PJ1158-1_UG_ENG Rev. 1B 09-07-06

PersonalIdenticationNumber(PIN):

The lamp in this product contains mercury.

Please dispose of in accordance with local, state or federal laws.

Projector

PJ1158

User's Manual – Operating Guide

Contents of package

(1) Projector

(2) Remote control

with two AA batteries

(3) Power cord

(4) RGB cable

(5) Audio/Video cable

(6) Quick Start Guide

and ViewSonic Wizard CD

(7) Lens cover, Rivet and Strap

NOTE • Keep the original packing materials for future reshipment. For moving the

projector, be sure to use the original packing materials. Use special caution for the lens

part.

WARNING ►Before using this product, please read the "User's Manual -

Safety Guide" and related manuals to ensure the proper use of this product.

After reading them, store them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are described

below.

WARNING This symbol indicates information that, if ignored, could possibly result in

personal injury or even death due to incorrect handling.

CAUTION This symbol indicates information that, if ignored, could possibly result in

personal injury or physical damage due to incorrect handling.

Please refer to the pages written following this symbol.

NOTE • The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in this manual.

• The reproduction, transfer or copy of all or any part of this document is not permitted

without express written consent.

Trademark acknowledgment

• Mac is registered trademarks of Apple Computer, Inc.

• VESA and SVGA are trademarks of the Video Electronics Standard Association.

• Windows is a registered trademark of Microsoft Corporation.

•

is a trademark of SRS Labs, Inc.

• WOW technology is incorporated under license from SRS Labs, Inc.

• Netscape is a registered trademark of Netscape Communications Corporation.

• JavaScript is a registered trademark of Sun Microsystems, Inc.

All other trademarks are the properties of their respective owners.

HOME

PAGE UP

PAGE DOWN

END

VIDEO

RGB

FREEZE

OFF

MAGNIFY

ASPECT AUTO

BLANK

MUTE

VOLUME

KEYSTONE

POSITION

ESC

ENTER

RESET

(1) (2) (3)

(7)

(4)

(6)(5)

1ViewSonic PJ1158

About this manual . . . . . . . . . . . . . . . 1

Content . . . . . . . . . . . . . . . . . . . . . . . 2

Projector features . . . . . . . . . . . . . . . 3

Preparations . . . . . . . . . . . . . . . . . . . 3

Contents of package

. . . . . . . . . . . . . . . . . . 3

Fastening the lens cover

. . . . . . . . . . . . . . . 3

Part names . . . . . . . . . . . . . . . . . . . . 4

Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Control panel

. . . . . . . . . . . . . . . . . . . . . . . . 5

Rear panel. . . . . . . . . . . . . . . . . . . . . . . . . .

Remote control

. . . . . . . . . . . . . . . . . . . . . . 6

Setting up . . . . . . . . . . . . . . . . . . . . . 7

Arrangement . . . . . . . . . . . . . . . . . . . . . . . . 8

Adjusting the projector's elevator . . . . . . . . 9

Using the security bar and slot

. . . . . . . . . . 9

Connecting your devices

. . . . . . . . . . . . . . 10

Connecting power supply

. . . . . . . . . . . . . 12

Remote control . . . . . . . . . . . . . . . . 13

Laser pointer

. . . . . . . . . . . . . . . . . . . . . . . 13

Putting batteries

. . . . . . . . . . . . . . . . . . . . 13

About the remote control signal

. . . . . . . . 14

Changing the frequency of remote

control signal

. . . . . . . . . . . . . . . . . . . . . 14

Using as a wired remote control

. . . . . . . . 15

Using as a

simple PC mouse & keyboard

. . . . . . . . 15

Power on/off . . . . . . . . . . . . . . . . . . 16

Turning on the power

. . . . . . . . . . . . . . . . 16

Turning off the power

. . . . . . . . . . . . . . . . 16

Operating . . . . . . . . . . . . . . . . . . . . 17

Adjusting the volume

. . . . . . . . . . . . . . . . . 17

Temporarily muting the sound

. . . . . . . . . . 17

Selecting an input signal

. . . . . . . . . . . . . . 17

Searching an input signal

. . . . . . . . . . . . . 18

Selecting an aspect ratio

. . . . . . . . . . . . . . 18

Adjusting the zoom and focus

. . . . . . . . . . 19

Adjusting the lens shift

. . . . . . . . . . . . . . . 19

Using the automatic adjustment feature

. . 19

Adjusting the position

. . . . . . . . . . . . . . . . 20

Correcting the keystone distortions

. . . . . . 20

Using the magnify feature

. . . . . . . . . . . . . 21

Freezing the screen

. . . . . . . . . . . . . . . . . 21

Temporarily blanking the screen

. . . . . . . . 22

Using the menu function

. . . . . . . . . . . . . 23

EASY MENU. . . . . . . . . . . . . . . . . . . 24

Aspect, Auto keystone execute, Keystone

, Keystone , Picture mode, Brightness,

Contrast, Color, Tint, Sharpness, Whisper,

Mirror, Reset, Filter time,

(EASY MENU continued)

Language, Go to Advanced Menu...

Content

PICTURE menu . . . . . . . . . . . . . . . . 26

Brightness, Contrast, Gamma, Color temp,

Color, Tint, Sharpness, Active iris, My memory

IMAGE menu . . . . . . . . . . . . . . . . . . 29

Aspect, Over scan, V position, H position,

H phase, H size, Auto adjust execute

INPUT menu . . . . . . . . . . . . . . . . . . 31

Progressive, Video nr, 3d-ycs, Color space,

Component, Video format, M1-d, Frame lock,

Rgb in, Resolution

SETUP menu . . . . . . . . . . . . . . . . . . 35

Auto keystone execute, Keystone ,

Keystone , Whisper, Mirror

AUDIO menu . . . . . . . . . . . . . . . . . . 37

Volume, Treble, Bass, Srs wow, Speaker, Audio

SCREEN menu . . . . . . . . . . . . . . . . . 38

Language, Menu position, Blank, Start up,

MyScreen, MyScreen Lock, M

essage, Source

name

OPTION menu . . . . . . . . . . . . . . . . . 42

Auto search, Auto keystone , Auto on, Auto

off, Lamp time, Filter time, My button, Service,

Security

NETWORK menu . . . . . . . . . . . . . . . 53

Dhcp, Ip address, Subnet mask, Default

gateway, Time difference, Date and time, e-shot,

Information, Service

Network functions . . . . . . . . . . . . . 56

Settings . . . . . . . . . . . . . . . . . . . . . . 60

Projector Control . . . . . . . . . . . . . . 76

Failure & Warning Alerts via E-mail 80

Projector Management via SNMP . . 82

Controlling the Projector via

Scheduling . . . . . . . . . . . . . . . . . . 83

e-SHOT(Still Image Transfer) Display

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Command Control via the Network 88

Maintenance . . . . . . . . . . . . . . . . . . 93

Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Air lter . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Internal clock battery

. . . . . . . . . . . . . . . . . 97

Other care

. . . . . . . . . . . . . . . . . . . . . . . . . 98

Troubleshooting . . . . . . . . . . . . . . . 99

Related messages

. . . . . . . . . . . . . . . . . . 99

Regarding the indicator lamps

. . . . . . . . 100

Phenomena that may be easy

to be mistaken for machine defects

. . . 102

Warranty and after-service . . . . . . 105

Specications . . . . . . . . . . . . . . . . 105

2ViewSonic PJ1158

Fastening the lens cover

To avoid losing the lens cover, please fasten the lens cover to the projector using

the included strap.

Fix the strap to the strap hole of the lens

cover.

Put one side of the strap into the groove on

the rivet.

Push the rivet into the rivet hole.

Projector features / Preparations

Projector features

This projector is used to project various picture signals onto a screen. This pro-

jector requires only a minimal amount of space for installation and can produce a

large projected image from even a short distance.

Preparations

Contents of package

Please see the “Contents of package” in the “User’s Manual (concise)” which is

a book. Your projector should come with the items shown there. Contact immedi

ately your dealer if anything is missing.

NOTE • Keep the original packing materials for future reshipment. Be sure

to use the original packing materials when moving the projector. Use special

caution for the lens.

Strap hole

Rivet hole

Bottom

3ViewSonic PJ1158

Part names

Projector

(1) Speakers (x 4).

(2) Focus ring

(3) Zoom ring

(4) Lamp cover

The lamp unit is inside.

(5) Lens shift cover

(6) Horizontal lens shift dial

(7) Vertical lens shift dial

(8) Front cover

(9) Lens

(10) Lens cover

(11) Remote sensors (x 3)

(12) Elevator feet (x 2)

(13) Elevator knobs (x 2)

(14) Filter cover

The air lter and intake vent are

inside.

(15) Exhaust vents

(16) Intake vents

(17) Rivet hole

(18) Handle

(19) Battery cover

(20) Control panel

(21) Rear panel

WARNING ►HOT! : Do not touch around the lamp cover and the exhaust

vents during use or just after use, since it is too hot.

►Do not look into the lens or vents while the lamp is on, since the strong light

is not good for your eyes.

►Do not grab the front cover to hold the projector up, since the projector may

drop down.

►Do not handle the elevator knobs without holding the projector, since the

projector may drop down.

CAUTION ►Maintain normal ventilation to prevent the projector from heat-

ing up. Do not cover, block or plug up the vents. Do not place anything that

can stick or be sucked to the vents, around the intake vents. Clean the air lter

periodically.

(12)

(13)

(17)

(19)

(16)

(20)

(11)

(1)

(21)

(18)

(2)

(3)

(1)

(8)

(15)

(12)

(10)

(9)

(11)

(12)

(13)

(14)

(11)

(1)

(20)

(4)

HOT!

(7)

(6)

(5)

4ViewSonic PJ1158

Part names

Control panel

(1) STANDBY/ON button

(2) MENU button

It consists of four cursor buttons.

(3) INPUT button

(4) POWER indicator

(5) TEMP indicator

(6) LAMP indicator

Rear panel

(1) Shutdown switch

(2) Security slot

(3) Security bar

(4) AC inlet

(5) Power switch

(6) RGB1 port

(7) RGB2 port

(8) CONTROL port

(9) M1-D port

(10) VIDEO port

(11) S-VIDEO port

(12) COMPONENT

(Y, C

, C

) ports

(13) AUDIO IN1 port

(14) AUDIO IN2 port

(15) AUDIO IN3 (R/L) ports

(16) AUDIO IN4 (R/L) ports

(17) RGB OUT port

(18) AUDIO OUT port

(19) REMOTE CONTROL port

(20) LAN port

CAUTION ►Do not use the security bar and the security slot to prevent the

projector from falling down, since it is not designed for it.

►Use the shutdown switch only when the projector is not turned off by normal

procedure, since pushing this switch stops operation of the projector without

cooling it down.

(6)

(5)

(4)

(1) (2) (3)

VIDEO

CONTROL

AUDIO IN 1

AUDIO IN 2

REMOTE

CONTROL

(3.5Φ)

AUX I/O

DC 5V 0.5A

S-VIDEO

LAN

AUDIO

OUT

AC IN

I O

R L R L

AUDIO IN 3 AUDIO IN 4

RGB

OUT

RGB1 RGB2 M1-D

Y CB/PB

CR/PR

SD CARD

VIDEO

CONTROL

AUDIO IN 1

AUDIO IN 2

REMOTE

CONTROL

(3.5Φ)

S-VIDEO

LAN

AUDIO

OUT

AC IN

I O

R L R L

AUDIO IN 3 AUDIO IN 4

RGB

OUT

RGB1 RGB2 M1-D

Y CB/PB

CR/PR

(14) (13) (17) (6) (7) (20) (18) (9) (19) (8)

(2)(1)

(10) (11) (15) (16)(12)

(5) (4) (3)

5ViewSonic PJ1158

Part names

Remote control

(1) Laser pointer

It is a beam outlet.

(2) LASER INDICATOR

(3) LASER button

(4) STANDBY/ON button

(5) VOLUME button

(6) MUTE button

(7) VIDEO button

(8) RGB button

(9) SEARCH button

(10) AUTO button

(11) ASPECT button

(12) POSITION button

(13) KEYSTONE button

(14) MAGNIFY - ON button

(15) MAGNIFY - OFF button

(16) FREEZE button

(17) BLANK button

(18) MY BUTTON - 1 button

(19) MY BUTTON - 2 button

(20) MENU button

(21) Lever switch : acting 3 functions as below.

Cursor button ▲ : to slide toward the side marked ▲.

Cursor button ▼ : to slide toward the side marked ▼.

ENTER button : to push down the center point.

(22) Cursor button ◄

(23) Cursor button ►

(24) RESET button

(25) ESC button

(26) Mouse left button

(27) Mouse right button

(28) PAGE UP button

(29) PAGE DOWN button

(30) Wired remote control port

(31) Battery cover

(32) Battery holder

(33) Frequency switch

WARNING ►Do not look into the beam outlet and

point the beam at people and pets while pressing the

LASER button, since the beam is not good for eyes.

CAUTION ►Note that the laser beam may result

in hazardous radiation exposure. Use the laser point

er only for pointing on the screen.

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

(11)

(22)

(28)

(20)

(25)

(12)

(14)

(15)

(16)

(13)

(30)

(27)

(21)

(23)

(29)

(24)

(10)

(18)

(5)

(6)

(9)

(19)

(26)

(17)

(4)

(7)

(2) (1)

(3)

(8)

Back of

the remote control

(32)

(33)

(31)

6ViewSonic PJ1158

Setting up

Install the projector according to the environment and manner the projector will be

used in.

WARNING ►Place the projector in a stable horizontal position. If the pro-

jector falls or is knocked over it could cause injury and/or damage to the projec

tor. Using a damaged projector could then result in re and/or electric shock.

• Do not place the projector on an unstable, slanted or vibrational surface such

as a wobbly or inclined stand.

• Do not place the projector on its side, front or rear position.

• Consult with your dealer before a special installation such as suspending from

a ceiling.

►Place the projector in a cool place, and ensure that there is sufcient ventila-

tion. The high temperature of the projector could cause re, burns and/or mal-

function of the projector.

• Do not stop-up, block or otherwise cover the projector's vents.

• Keep a space of 30 cm or more between the sides of the projector and other

objects such as walls.

• Do not place the projector on metallic thing or anything weak in heat.

• Do not place the projector on carpet, cushions or bedding.

• Do not place the projector in direct sunlight or near hot objects such as heat

ers.

• Do not place anything near the projector lens or vents, or on top of the projec

tor.

• Do not place anything that may be sucked into or stick to the vents on the bot

tom of the projector. This projector has some intake vents also on the bottom.

►Do not place the projector anyplace where it may get wet. Getting the pro-

jector wet or inserting liquid into the projector could cause re, electric shock

and/or malfunction of the projector.

• Do not place the projector in a bathroom or the outdoors.

• Do not place anything containing liquid near the projector.

CAUTION ►Avoid placing the projector in smoky, humid or dusty place.

Placing the projector in such places could cause re, electric shock and/or mal-

function of the projector.

• Do not place the projector near humidiers, smoking spaces or a kitchen.

►Position the projector to prevent light from directly hitting the projector's re-

mote sensor.

7ViewSonic PJ1158

Arrangement

Refer to the illustrations and tables below to determine screen size and projection distance.

The values shown in the table are calculated for a full size screen: 1024×768

(a) Screen size (diagonal)

(b) Projection distance (±10%)

Setting up

(a) Screen

size

[inch (m)]

4 : 3 screen

16 : 9 screen

(b) Projection distance

[m (inch)]

[cm (inch)]

(b) Projection distance

[m (inch)]

[cm (inch)]

min.

max. down

min.

max. down up

30 (0.8) 0.9 (35) 1.1 (42)

5 (2)

41 (16)

1.0 (38) 1.2 (46)

-1 (0) 39 (15)

40 (1.0) 1.2 (47) 1.4 (57) 6 (2) 55 (22) 1.3 (51) 1.6 (62) -2 (-1) 51 (20)

60 (1.5) 1.8 (71) 2.2 (86) 9 (4) 82 (32) 2.0 (78) 2.4 (94) -2 (-1) 77 (30)

70 (1.8) 2.1 (83) 2.6 (100) 11 (4) 96 (38) 2.3 (91) 2.8 (110) -3 (-1) 90 (35)

80 (2.0) 2.4 (96) 2.9 (115) 12 (5) 110 (43) 2.6 (104) 3.2 (126) -3 (-1) 103 (41)

90 (2.3) 2.7 (108) 3.3 (130) 14 (5) 123 (49) 3.0 (117) 3.6 (141) -4 (-1) 116 (46)

100 (2.5) 3.0 (120) 3.7 (144) 15 (6) 137 (54) 3.3 (131) 4.0 (157) -4 (-2) 129 (51)

120 (3.0) 3.7 (144) 4.4 (174) 18 (7) 165 (65) 4.0 (157) 4.8 (189) -5 (-2) 154 (61)

150 (3.8) 4.6 (181) 5.5 (217) 23 (9) 206 (81) 5.0 (197) 6.0 (237) -6 (-2) 193 (76)

200 (5.1) 6.1 (241) 7.4 (291) 30 (12) 274 (108) 6.7 (263) 8.0 (317) -8 (-3) 257 (101)

250 (6.4) 7.7 (302) 9.2 (364) 38 (15) 343 (135) 8.4 (329) 10.1 (396) -10 (-4) 322 (127)

300 (7.6) 9.2 (363) 11.1 (437) 46 (18)

411 (162)

10.0 (395) 12.1 (476)

-12 (-5) 386 (152)

350 (8.9) 10.8 (424) 13.0 (510) 53 (21) 480 (189) 11.7 (462) 14.1 (556) -15 (-6) 450 (177)

(a)

(b)

(a)

(b)

On a horizontal

surface

Suspended from

the ceiling

• Keep a space of 30 cm or more between the

sides of the projector and other objects such as

walls.

• Consult with your dealer before a special

installation such as suspending from a ceiling.

8ViewSonic PJ1158

Adjusting the projector's elevator

When the place to put the projector is slightly uneven to the left or right, use the

elevator feet to place the projector horizontally.

Using the feet can also tilt the projector in order to project at

a suitable angle to the screen, elevating the front side of the

projector within 8 degrees.

This projector has 2 elevator feet and 2 elevator knobs. An elevator foot is adjust

able while pulling up the elevator knob on the same side as it.

Holding the projector, pull the elevator knobs up to loose the elevator feet.

Position the front side of the projector to the desired height.

Release the elevator knobs in order to lock the elevator feet.

After making sure that the elevator feet are locked, put the projector gently.

If necessary, the elevator feet can be manually twisted to make more precise

adjustments. Hold the projector when twisting the feet.

Setting up

To loose an elevator foot,

pull up the elevator knob

on the same side as it.

CAUTION ►Do not handle the elevator knobs without holding the projector,

since the projector may drop down.

►Do not tilt the projector other than it elevating its front within 8 degrees us-

ing the adjuster feet. A tilt of the projector exceeding the restriction could cause

malfunction or shortening the lifetime of consumables, or the projector itself.

Using the security bar and slot

A commercial anti-theft chain or wire up to 10 mm in

diameter can be attached to the security bar on the pro-

jector.

Also this product has the security slot for the Kensington

lock.

For details, see the manual of the security tool.

WARNING ►Do not use the security bar and the

security slot to prevent the projector from falling down,

since it is not designed for it.

NOTE •

The security bar and the security slot are not

comprehensive theft prevention measures. They are intended

to be used as supplemental theft prevention measure.

To nely adjust, twist

the foot.

q

Security slot

Anti-theft chain or wire

Security bar

VIDEO

CONTROL

AUDIO IN 1

AUDIO IN 2

REMOTE

CONTROL

(3.5Φ)

AUX I/O

DC 5V 0.5A

S-VIDEO

LAN

AUDIO

OUT

AC IN

I O

R L R L

AUDIO IN 3 AUDIO IN 4

RGB

OUT

RGB1 RGB2 M1-D

Y CB/PB

CR/PR

SD CARD

VIDEO

CONTROL

AUDIO IN 1

AUDIO IN 2

REMOTE

CONTROL

(3.5Φ)

S-VIDEO

LAN

AUDIO

OUT

AC IN

I O

R L R L

AUDIO IN 3 AUDIO IN 4

RGB

OUT

RGB1 RGB2 M1-D

Y CB/PB

CR/PR

9ViewSonic PJ1158

Setting up

Connecting your devices

Be sure to read the manuals for devices before connecting them to the projector.

Make sure that all the devices are suitable to be connected with this product, and

prepare the cables required to connect.

Please refer to the following illustrations to connect them.

WARNING ►Do not disassemble or modify the projector.

►Be careful not to damage the cables, and do not use damaged cables.

CAUTION ►Turn off all devices and unplug their power cords prior to con-

necting them to projector. Connecting a live device to the projector may gener

ate extremely loud noises or other abnormalities that may result in malfunction

or damage to the device and the projector.

►Use appropriate accessory or otherwise designed cables. Ask your dealer

about non-accessory cables which may have to be of a specic length or

equipped with a core. For cables with a core only at one end, connect the end

with the core to the projector.

►Make sure that devices are connected to the correct ports. An incorrect con-

nection may result in malfunction or damage to the device and the projector.

VIDEO

CONTROL

AUDIO IN 1

AUDIO IN 2

REMOTE

CONTROL

S-VIDEO

AUDIO

OUT

R L R L

AUDIO IN 3 AUDIO IN 4

RGB

OUT

RGB1 RGB2 M1-D

CB/PB

AUDIO IN

Y CB/PB CR/PR

COMPONENT VIDEO OUT

R L

AUDIO IN OUT

M1-D

RGB IN

RGB OUT

AUDIO OUT

RGB OUT

AUDIO OUT

RS-232C

VIDEO OUT

R L

AUDIO IN OUT

R L

AUDIO IN OUT

S-VIDEO OUT

CR/PR

LAN

Monitor

M1-D

signal

source

Remote

control

Speakers

VCR/DVD player

10ViewSonic PJ1158

Setting up

NOTE • Be sure to read the manuals for devices before connecting them to the

projector, and make sure that all the devices are suitable to be connected with this

product. Before connecting to a PC, check the signal level, the signal timing, and the

resolution.

- Do not connect LAN port to any network that might have the excessive voltage.

- Some signal may need an adapter to input this projector.

- Some PCs have multiple screen display modes that may include some signals which

are not supported by this projector.

- Although the projector can display signals with resolution up to UXGA (1600X1200), the

signal will be converted to the projector’s panel resolution before being displayed. The

best display performance will be achieved if the resolutions of the input signal and the

projector panel are identical.

• While connecting, make sure that the shape of the cable's connector ts the port to

connect with. And be sure to tighten the screws on connectors with screws.

• When connecting a laptop PC to the projector, be sure to activate the PC’s external

RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT

display.) For details on how this is done, please refer to the instruction manual of the

corresponding laptop PC.

• When the picture resolution is changed on a computer depending on an input,

automatic adjustment function may take some time and may not be completed. In this

case, you may not be able to see a check box to select “Yes/No” for the new resolution

on Windows. Then the resolution will go back to the original. It might be recommended

to use other CRT or LCD monitors to change the resolution.

• In some cases, this projector may not display a proper picture or display any picture on

screen. For example, automatic adjustment may not function correctly with some input

signals. An input signal of composite sync or sync on G may confuse this projector, so

the projector may not display a proper picture.

• The M1-D port of this model is compatible with HDCP (High-bandwidth Digital Content

Protection) and therefore capable of displaying a video signal from HDCP compatible

DVD players or the like.

About Plug-and-Play capability

Plug-and-Play is a system composed of a computer, its operating system and peripheral

equipment (i.e. display devices). This projector is VESA DDC 2B compatible. Plug-and-

Play can be used by connecting this projector to a computer that is VESA DDC (display

data channel) compatible.

• Take advantage of this feature by connecting an RGB cable to the RGB1 port (DDC

2B compatible). Plug-and-Play may not work properly if any other type of connection is

attempted.

• Please use the standard drivers in your computer as this projector is a Plug-and-Play

monitor.

Connecting your devices (continued)

11ViewSonic PJ1158

Setting up

Connecting power supply

Connect the connector of the power cord to the AC inlet of the projector.

Firmly plug the power cord's plug into the outlet.

WARNING ►Please use extra caution when connecting the power cord, as

incorrect or faulty connections may result in re and/or electrical shock.

• Only use the power cord that came with the projector. If it is damaged, contact

your dealer to newly get correct one.

• Only plug the power cord into an outlet rated for use with the power cord's

specied voltage range.

AC inlet

to the outlet

Connector of the power cord

12ViewSonic PJ1158

Remote control

Putting batteries

Please load the batteries before using the remote control. If the remote control starts to

malfunction, replace the batteries. If you will not use the remote control for an extended

period, remove the batteries from the remote control and store them in a safe place.

Slide back and remove the

battery cover in the direction

of the arrow.

Align and insert the two AA

batteries according to their

plus and minus terminals as indicated in the remote control.

Replace the battery cover in the direction of the arrow and snap it back into place.

Laser pointer

This remote control has a laser pointer in place of a nger or rod. The laser beam works

and the LASER INDICATOR lights while the LASER button is pressed.

Remote control

WARNING ►The laser pointer of the remote control is used in place of a

nger or rod. Never look directly into the laser beam outlet or point the laser

beam at other people. The laser beam can cause vision problems.

CAUTION ►Use of controls or adjustments or performance of procedures

other than those specied herein may result in hazardous radiation exposure.

WARNING ►Always handle the batteries with care and use them only as

directed. Improper use may result in battery explosion, cracking or leakage,

which could result in re, injury and/or pollution of the surrounding environment.

• Be sure to use only the batteries specied. Do not use batteries of different

types at the same time. Do not mix a new battery with used one.

•

Make sure the plus and minus terminals are correctly aligned when loading a battery.

• Keep a battery away from children and pets.

• Do not recharge, short circuit, solder or disassemble a battery.

•

Do not allow a battery in a re or water. Keep batteries in a dark, cool and dry place.

•

If you observe a leakage of a battery, wipe out the ower and then replace a battery.

If the ower adheres your body or clothes, rinse well with water immediately.

LASER INDICATOR

LASER button

13ViewSonic PJ1158

Changing the frequency of remote control signal

The accessory remote control has the choice of the

mode 1 or the mode 2, in the frequency of its signal.

If the remote control does not function properly, at

tempt to change the signal frequency.

Please remember that the “REMOTE FREQ.” in

SERVICE item of OPTION menu of the projector to

be controlled should be set to the same mode as

the remote control.

To set the mode of the remote control, slide the

knob of the frequency switch inside the battery cov

er into the position indicated by the mode number to

choose.

About the remote control signal

The remote control works with the projector’s remote sensors. This projector has three re-

mote sensors on the front, on the top, and on the back.

The sensors can be respectively turned active or inactive using the “REMOTE RECEIV” in

the SERVICE item of OPTION menu. Each sensor senses the signal within the following

range when the sensor is active.

The front and top sensors:

60 degrees (30 degrees to the left and right of the

sensor) within 3 meters about.

The back sensor:

40 degrees (20 degrees to the left and right of the

sensor) within 3 meters about.

Remote control

NOTE •

The remote control signal reected

in the screen or the like may be available. If it is

difcult to send the signal to the sensor directly,

attempt to make the signal reect.

• The remote control uses infrared light to send

signals to the projector (Class 1 LED), so be sure

to use the remote control in an area free from

obstacles that could block the remote control’s

signal to the projector.

• The remote control may not work correctly if

strong light (such as direct sun light) or light from

an extremely close range (such as from an inverter

uorescent lamp) shines on the remote sensor

of the projector. Adjust the position of projector

avoiding those lights.

Approx.

3 m

30º

Approx.

3 m

20º

Approx.

3 m

2 1

Back of the

remote control

Inside of

the battery cover

Frequency switch

14ViewSonic PJ1158

Using as a wired remote control

The accessory remote control works as a wired remote

control, when the wired control port at the bottom of the

remote control connects with the REMOTE CONTROL

port on the back of the projector via an audio cable with 3.5

diameter stereo mini plugs.

When the remote control signal is hard to reach surely to

the projector in the environment, this function is effective.

Remote control

NOTE •

To connect the remote control with the projector, use an audio cable with 3.5

diameter stereo mini plugs.

Using as a simple PC mouse & keyboard

The accessory remote control works as a simple mouse

and keyboard of the PC, when an M1-D/USB cable con-

nects this projector’s M1-D port with the PC’s DVI-D and

USB (A type) ports.

(1) Mouse left button

Pushing the button into the center point works instead

of clicking the mouse's left button.

Tilting this button to one of eight directions moves the

PC's move pointer on the screen in the direction.

(2) Mouse right button

Pressing the button works instead of clicking the

mouse’s right button.

(3) Lever switch

Sliding toward the side marked ▲ works instead of the

[↑] key on the keyboard. Sliding toward the side marked

▼ works instead of the [↓] key on the keyboard.

(4)Cursorbutton◄

This button works instead of the [←] key on the key-

board.

(5)Cursorbutton►

This button works instead of the [→] key on the keyboard.

(6) PAGE UP button

This button works instead of the PAGE UP key on the key board.

(7) PAGE DOWN button

This button works instead of the PAGE DOWN key on the key board.

NOTE •

When the simple mouse & keyboard function of this product does not work

correctly, please check the following.

- When an M1-D/USB cable connects this projector with a PC having a built-in pointing

device (e.g. track ball) like a notebook PC, open BIOS setup menu, then select the

external mouse and disable the built-in pointing device, because the built-in pointing

device may have priority to this function.

- Windows 95 OSR 2.1 or higher is required for this function. And also this function may

not work depending on the PC’s congurations and mouse drivers.

Operating simultaneously two or more keys is void except for mouse drag and drop operation.

- This function is activated only when the projector is working properly.

VIDEO

CONTROL

AUDIO IN 1

AUDIO IN 2

REMOTE

CONTROL

(3.5Φ)

AUX I/O

DC 5V 0.5A

S-VIDEO

LAN

AUDIO

OUT

AC IN

I O

R L R L

AUDIO IN 3 AUDIO IN 4

RGB

OUT

RGB1 RGB2 M1-D

Y CB/PB

CR/PR

SD CARD

VIDEO

CONTROL

AUDIO IN 1

AUDIO IN 2

REMOTE

CONTROL

(3.5Φ)

S-VIDEO

LAN

AUDIO

OUT

AC IN

I O

R L R L

AUDIO IN 3 AUDIO IN 4

RGB

OUT

RGB1 RGB2 M1-D

Y CB/PB

CR/PR

VIDEO

CONTROL

AUDIO IN 1

AUDIO IN 2

REMOTE

CONTROL

(3.5Φ)

AUX I/O

DC 5V 0.5A

S-VIDEO

LAN

AUDIO

OUT

AC IN

I O

R L R L

AUDIO IN 3 AUDIO IN 4

RGB

OUT

RGB1 RGB2 M1-D

Y CB/PB

CR/PR

SD CARD

VIDEO

CONTROL

AUDIO IN 1

AUDIO IN 2

REMOTE

CONTROL

(3.5Φ)

S-VIDEO

LAN

AUDIO

OUT

AC IN

I O

R L R L

AUDIO IN 3 AUDIO IN 4

RGB

OUT

RGB1 RGB2 M1-D

Y CB/PB

CR/PR

to a signal

source

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

(3)

(4)

(6)

(2)

(5)

(7)

(1)

15ViewSonic PJ1158

Power on/off

Turning on the power

Make sure that the power cord is rmly and cor-

rectly connected to the projector and the outlet.

Remove the lens cover, and set the power switch to

the ON position.

The power indicator will light up in steady orange. Then

wait several seconds because the buttons may not func

tion for these several seconds.

(1)

When AUTO ON in OPTION menu is set to TURN ON

The lamp will only be automatically turned on when the

Power switch is turned on after the power was turned off by

Power switch last time. Afterwards the POWER indicator

will begin blinking in green. When the power is completely

on, the indicator will stop blinking and light in green.

(2)

When AUTO ON in the OPTION menu is set to TURN OFF :

Please see step 3.

Press the STANDBY/ON button on the projector or the re-

mote control.

To display the picture, select an input signal according to the section

"Selecting an input signal".

Turning off the power

Press the STANDBY/ON button on the projector or the remote

control.

The message "Power off?" will appear on the screen for about 5

seconds.

Press the STANDBY/ON button on the projector or the remote

control again while the message appears.

The projector lamp will go off, and the POWER indicator will begin

blinking in orange.

Then the POWER indicator will stop blinking and light in steady

orange when the lamp cooling is complete.

Make sure that the power indicator lights in steady orange, and set the power

switch to the OFF position. The POWER indicator will go off. Attach the lens cover.

Do not turn the projector on for 10 minutes or more after turning it off. Turning the projector

on again too soon could shorten the lifetime of some consumable parts of the projector.

POWER

(Steady orange)

POWER

(Blinking in green)

POWER

(Steady green)

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

STANDBY/ON

button

POWER

indicator

Power off?

WARNING ►

A strong light is emitted when the projector’s power is on. Do not look into the lens

of the projector or look inside of the projector through any of the projector’s openings.

►

Do not touch around the lamp cover and the exhaust vents during use or just after use,

since it is too hot.

NOTE •

Turn the power on/off in right order. Please power on the projector prior to

the connected devices. Power off the projector later than the connected devices.

•

Use the shutdown switch only when the projector is not turned off by normal procedure.

Power on/off

POWER

(Blinking in orange)

POWER

(Steady orange)

16ViewSonic PJ1158

Operating

Adjusting the volume

Press the VOLUME button on the remote control.

A dialog will appear on the screen to aid you in adjusting the volume.

Use the cursor buttons ▲/▼ to adjust the volume.

To close the dialog and complete the operation, press the

VOLUME button again. Even if you do not do anything, the

dialog will automatically disappear after a few seconds.

● When no audio port is selected for current picture input port, the volume adjust-

ment is disable. Please see the AUDIO item of AUDIO menu.

Temporarily muting the sound

Press the MUTE button on the remote control.

A dialog will appear on the screen indicating that you have muted the sound.

To restore the sound, press the MUTE or VOLUME button.

Even if you do not do anything, the dialog will automatically

disappear after a few seconds.

● As long as no audio input is selected for current picture input port, the sound is

always muted. Please see the AUDIO item of AUDIO menu.

Selecting an input signal

Press the INPUT button on the projector.

Each time you press the button, the projector switches its

input port as below.

RGB 1



RGB 2



M1-D

VIDEO



S-VIDEO



COMPONENT (Y, C

, C

)

Press the RGB button on the remote control to select an

input port for the RGB signal.

Each time you press the button, the projector switches its RGB

input port as below.

RGB 1



RGB 2



M1-D

● If the RGB button is pushed (when switching from VIDEO to RGB signals)

when TURN ON is selected for the AUTO SEARCH item in the OPTION menu

the projector will check the RGB 1 port rst. If no input is detected at the port,

the projector will check other port in above order.

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

(continued on next page)

17ViewSonic PJ1158

Operating

Searching an input signal

Press the SEARCH button on the remote control.

The projector will start to check its input ports in order to

nd any input signals.

When an input is found, the projector will stop searching and display the image.

If no signal is found, the projector will return to the state selected before the

operation.

RGB 1



RGB 2



M1-D



COMPONENT (Y, C

, C

)



S-VIDEO



VIDEO

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

Selecting an input signal (continued)

Press the VIDEO button on the remote control to select an

input for video signal.

Each time you press the button, the projector switches its

video input port as below.

COMPONENT

(Y, C

, C

)



S-VIDEO



VIDEO

● If the VIDEO button is pushed (when switching from RGB to VIDEO signals)

when TURN ON is selected for the AUTO SEARCH item in the OPTION menu

the projector will check the COMPONENT

(Y, C

, C

)

port rst. If no input

is detected at the port, the projector will check other ports in above order.

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

Selecting an aspect ratio

Press the ASPECT button on the remote control.

Each time you press the button, the projector switches the mode for aspect

ratio in turn.



For an RGB signal

NORMAL



4:3



16:9



SMALL



For an M1-D signal

NORMAL



4:3



16:9



14:9



SMALL



For a video signal, s-video signal or component video signal

4:3



16:9



14:9



SMALL



For no signal

4:3 (xed)

● The NORMAL mode keeps the original aspect ratio of the signal.

● Performing the automatic adjustment initializes the aspect ratio setting.

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

18ViewSonic PJ1158

Adjusting the zoom and focus

Use the zoom ring to adjust the screen size.

Use the focus ring to focus the picture.

Operating

Focus ring

Zoom ring

Adjusting the lens shift

Use the vertical lens shift dial to shift

the picture upward or downward.

Use the horizontal lens shift dial to

shift the picture left or right.

Using the automatic adjustment feature

Press the AUTO button on the remote control.



For an RGB signal

The vertical position, the horizontal position, the horizontal

phase and the horizontal size will be automatically adjusted.

And the aspect ratio will be automatically set to default. Make sure that the

application window is set to its maximum size prior to attempting to use this

feature. A dark picture may still be incorrectly adjusted. Use a bright picture

when adjusting.



For an M1-D signal

The aspect ratio will be automatically set to default.



For a video signal or s-video signal

The video format

best suited for the respective input signal will be selected

automatically.

This function is available only when the AUTO is selected to the VIDEO

FORMAT item in INPUT menu. For a component video signal, the signal type

is identied automatically independently of this function.



For a video signal, s-video signal or component video signal

The vertical position, horizontal position and aspect ratio will be automatically

set to default.



For a component video signal

The horizontal phase will be automatically set to default.

● The automatic adjustment operation requires about 10 seconds. Also please

note that it may not function correctly with some input.

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

2/5

1/10

DOWN

RIGHT

Lens shift cover

LEFT

NOTE • When the vertical lens shift

is adjusted, it is recommended to shift

the picture upward.

Top

19ViewSonic PJ1158

Adjusting the position

Press the POSITION button on the remote control.

The “POSITION” indication will appear on the screen.

Use the cursor buttons ▲/▼/◄/► to adjust the picture posi-

tion.

When you want to reset the operation, press the RESET button on the remote

control during the operation.

To complete this operation, press the POSITION button again. Even if you do

not do anything, the dialog will automatically disappear after a few seconds.

●

When this function is performed on a video signal, s-video signal or component video

signal, some image such as an extra-line may appear at outside of the picture.

●

When this function is performed on a video signal, s-video signal, or component video signal

of 525i (480i) or 625i (576i), the range of this adjustment depends on the OVER SCAN in IM

AGE menu setting. It is not possible to adjust when the OVER SCAN is set to 10.

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

Operating

Correcting the keystone distortions

Press the KEYSTONE button on the

remote control. A dialog will appear on the

screen to aid you in correcting the distortion.

Use the cursor buttons

▲

▼

to select AUTO or

MANUAL operation, and press the button

►

to perform the following.

1) AUTO executes automatic vertical keystone correction.

2) Manual displays a dialog for keystone correction.

Use the cursor buttons ◄/► to select the direction to correct

( or ) then use the buttons ▲/▼ for adjustment.

To close the dialog and complete this operation, press the

KEYSTONE button again. Even if you don’t do anything,

the dialog will automatically disappear after a few seconds.

● The adjustable range of this function will vary among inputs. For some input,

this function may not work well.

● When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SET-

UP menu, if the projector screen is inclined or angled downward, this function

may not work correctly.

● When the zoom adjustment is set to the TELE (telephoto focus), this function

may be excessive. This function should be used when the zoom adjustment is

set to the full WIDE (wide-angle focus) whenever possible.

●

When the projector is placed on the level (about ±3°), this function may not work.

● When the projector is inclined to near ±30 degree or over, this function may not

work well.

●

When the vertical lens shift is not set fully upward (not set fully downward for the

optional lens type FL-601 only), this function may not work well.

●

When the horizontal lens shift is not set to the center, this function may not work well.

● This function will be unavailable when Transition Detector is on

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

-';5610'



#761':'%76'



/#07#.

 



-';5610'



20ViewSonic PJ1158

Operating

Using the magnify feature

Press the ON button of MAGNIFY on the remote control.

The “MAGNIFY” indication will appear on the screen (al

though the indication will disappear in several seconds with no

operation), and the projector will go into the MAGNIFY mode.

Use the cursor buttons ▲/▼ to adjust the zoom level.

To move the zoom area, press the POSITION button in the MAGNIFY mode,

then use the cursor buttons ▲/▼/◄/► to move the area. And to nalize the

zoom area, press the POSITION button again.

To exit from the MAGNIFY mode and restore the screen to normal, press the

OFF button of MAGNIFY on the remote control.

● The projector automatically exits from the MAGNIFY mode when the input sig-

nal is changed, or when the display condition is changed.

● Although in the MAGNIFY mode, the keystone distortion condition may vary, it

will be restored when the projector exits from the MAGNIFY mode.

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

Freezing the screen

Press the FREEZE button on the remote control.

The “FREEZE” indication will appear on the screen (although

the indication will not appear when the TURN ON is selected to

the MESSAGE item of SCREEN menu), and the projector will

go into the FREEZE mode.

To exit the FREEZE mode and restore the screen to normal, press the FREEZE

button again.

● The projector automatically exits from the FREEZE mode when the input signal

changes, or when one of the projector’s buttons or the remote control buttons

of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOL

UME, MUTE, KEYSTONE, POSITION, MENU, MAGNIFY and MY BUTTON is

pressed.

● If the projector continues projecting a still image for a long time, the LCD panel

might possibly be burned in. Do not leave the projector in the FREEZE mode

for too long.

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

NOTE • The zoom level can be nely adjusted. Closely watch the screen to

nd the level you want.

21ViewSonic PJ1158

Operating

Temporarily blanking the screen

Press the BLANK button on the remote control.

The blank screen will be displayed instead of the screen

of input signal. Please refer to the BLANK item in SCREEN

To exit from the blank screen and return to the input signal screen, press the

BLANK button again.

● The projector automatically returns to the input signal screen when one of the

projector’s buttons or the remote control buttons is pressed or one of the com

mands (except get commands) is transmitted to the control port.

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

NOTE • The sound is not connected with the blank screen function. If

necessary, set the volume or mute rst.

22ViewSonic PJ1158

Operating

Using the menu function

This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO,

SCREEN, OPTION, NETWORK, and EASY MENU. EASY MENU consists of functions

often used, and the other menus are classied into each purpose. Each of these menus is

operated using the same methods. The basic operations of these menus are as follows.

Press the MENU button on the remote control or one of

the cursor buttons on the projector.

The Advanced MENU, or EASY MENU that has priority just

after powered on, will appear.

In the EASY MENU

If you want to change it to the Advanced MENU, select the

"Go to Advanced Menu..."

Use the cursor buttons ▲/▼ to select an item to operate.

Use the cursor buttons◄/► to operate the item.

In the Advanced MENU

Use the cursor buttons ▲/▼ to select a menu.

If you want to change it to the EASY MENU, select the

EASY MENU.

Then press the cursor button ► on the projector or remote

control, or the ENTER button on the remote control to select

an item. The display of the selected menu will be active.

Use the cursor buttons ▲/▼ to select an item to operate.

Then press the cursor button

►

on the projector or remote control, or the ENTER button

on the remote control to progress. The operation menu of the selected item will appear.

Use the cursor buttons▲/▼ to operate the item.

●

When you want to reset the operation, press the RESET button on the remote control

during the operation. Note that items whose functions are performed simultaneously

with operation (ex. LANGUAGE, H PHASE, VOLUME etc.) cannot be reset.

●

In the Advanced MENU, when you want to return to the previous display, press the cur-

sor button

◄

on the projector or remote control, or the ESC button on the remote con-

trol.

Press the MENU button on the remote control again to close the menu and

complete this operation. Even if you do not do anything, the dialog will auto-

matically disappear after about 10 seconds.

● Some functions cannot be performed when a certain input port is selected, or

when a certain input signal is displayed.

'#5;/'07=4)$?

#52'%6





':'%76'





)QVQ#FXCPEGF/GPW



014/#.

J

'0).+5*

#761-';5610'

-';5610'

2+%674'/1&'

$4+)*60'55

%1064#56

%1.14

6+06

5*#420'55

9*+52'4

/+4414

4'5'6

(+.6'46+/'

.#0)7#)'



/'07=4)$?

+/#)'



5'672



#7&+1

2+%674'



+0276



126+10

5%4''0

5*#420'55



$4+)*60'55㧗

%1064#56㧗

%1.14㧗

6+06㧗

%1.146'/2



/+&

)#//#



&'(#7.6







5'.'%6



0'6914-

'#5;/'07

#%6+8'+4+567401((

/;/'/14;5#8'

RESET button

ENTER button

MENU button

Cursor buttons

BLANK LASER

ASPECT

ESC MENU RESET

POSITION AUTO

MAGNIFY

MY BUTTON

VOLUME

ON 1

MUTE

OFF 2

FREEZE KEYSTONE SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON

VIDEO RGB

LASER

INDICATOR

23ViewSonic PJ1158

EASY Menu

Item Description

ASPECT

Using the ◄/► buttons switches the mode for aspect ratio.

See the ASPECT item in IMAGE menu.

AUTO KEY-

STONE

EXECUTE

Using the ► button executes the auto keystone function.

See the AUTO KEYSTONE EXECUTE item in SETUP menu

KEYSTONE

Using the ◄/► buttons corrects the vertical keystone distortion.

See the KEYSTONE item in SETUP menu.

KEYSTONE

Using the ◄/► buttons corrects the horizontal keystone distortion.

See the KEYSTONE item in SETUP menu.

PICTURE MODE

Using the ◄/► buttons switches the picture mode.

The picture modes are combinations of GAMMA and COLOR

TEMP settings. Choose a suitable mode according to the projected

source.

NORMAL

CINEMA

DYNAMIC

WHITEBOARD

BOARD(GREEN)

BOARD(BLACK)

COLOR TEMP GAMMA

NORMAL MID DEFAULT #1 DEFAULT

CINEMA LOW DEFAULT #2 DEFAULT

DYNAMIC HIGH DEFAULT #3 DEFAULT

BOARD(BLACK) Hi-BRIGHT-1 DEFAULT #4 DEFAULT

Daylight Mode Hi-BRIGHT-1 DEFAULT #3 DEFAULT

WHITEBOARD MID DEFAULT #5 DEFAULT

• When the combination of GAMMA and COLOR TEMP differs

from pre-assigned modes above, the display on the menu for the

PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and

COLOR TEMP items in PICTURE menu.

•

When this function is performed, a certain extra such as a line may appear.

From the EASY MENU, items shown in the table below can

be performed.

Select an item using the ▲/▼ cursor buttons on the

projector or remote control. Then perform it according to the

following table.

'#5;/'07=4)$?

#52'%6





':'%76'





)QVQ#FXCPEGF/GPW



014/#.

J

'0).+5*

#761-';5610'

-';5610'

2+%674'/1&'

$4+)*60'55

%1064#56

%1.14

6+06

5*#420'55

9*+52'4

/+4414

4'5'6

(+.6'46+/'

.#0)7#)'



(continued on next page)

24ViewSonic PJ1158

EASY Menu

Item Description

BRIGHTNESS

Using the ◄/► buttons adjusts the brightness.

See the BRIGHTNESS item in PICTURE menu

CONTRAST

Using the ◄/► buttons adjusts the contrast.

See the CONTRAST item in PICTURE menu

COLOR

Using the ◄/► buttons adjusts the strength of whole color.

See the COLOR item in PICTURE menu

TINT

Using the ◄/► buttons adjusts the tint.

See the TINT item in PICTURE menu

SHARPNESS

Using the ◄/► buttons adjusts the sharpness.

See the SHARPNESS item in PICTURE menu

WHISPER

Using the ◄/► buttons turns off/on the whisper mode.

See the WHISPER item in SETUP menu.

MIRROR

Using the ◄/► buttons switches the mode for mirror status.

See the MIRROR item in SETUP menu

RESET

Performing this item resets all of the EASY MENU items except the

FILTER TIME and LANGUAGE.

A dialog is displayed for conrmation. Selecting the RESET using

the ▲ button performs resetting.

FILTER TIME

Performing this item resets the lter time which counts usage time

of the air lter.

A dialog is displayed for conrmation. Selecting the RESET using

the ▲ button performs resetting.

See the FILTER TIME item in OPTION menu

LANGUAGE

Using the ◄/► buttons changes the display language.

See the LANGUAGE item in SCREEN menu

Go to

Advanced Menu...

Select “Go to Advanced Menu…” on the menu, and press the

►

or ENTER button to use the menu of PICTURE, IMAGE, INPUT,

SETUP, AUDIO, SCREEN, OPTION or NETWORK.

EASY Menu (continued)

25ViewSonic PJ1158

PICTURE Menu

Item Description

BRIGHTNESS

Using the ▲/▼ buttons adjusts the brightness.

Light

Dark

CONTRAST

Using the ▲/▼ buttons adjusts the contrast.

Strong

Weak

GAMMA

Using the ▲/▼ buttons switches the gamma mode.

#1 DEFAULT

#1 CUSTOM

#2 DEFAULT

#2 CUSTOM

#3 DEFAULT

#5 CUSTOM

#5 DEFAULT

#4 CUSTOM

#4 DEFAULT

#3 CUSTOM

To adjust CUSTOM

Selecting a mode whose name includes

CUSTOM and then pressing the ► button

or the ENTER button displays a dialog to aid

you in adjusting the mode.

This function is useful when you want to

change the brightness of particular tones.

Choose an item using the ◄/► buttons, and

adjust the level using the ▲/▼ buttons.

You can display a test pattern for checking the effect of your adjust

ment by pressing the ENTER button.

Each time you press the ENTER button, the pattern changes as

below.

No pattern

Gray scale of 9 steps

Ramp



Gray scale of 15 steps

The eight equalizing bars correspond to eight tone levels of the test

pattern except the darkest in the left end. If you want to adjust the

2nd tone from left end on the test pattern (Gray scale of 9 steps),

use the equalizing adjustment bar “1”. The darkest tone at the left

end of the test pattern cannot be controlled with any of equalizing

adjustment bar.

• When this function is performed, lines or other distortion may ap-

pear.

From the PICTURE menu, items shown in the table below

can be performed.

Select an item using the

▲/▼ cursor buttons on the

projector or remote control, and press the ► cursor button

on the projector or remote control, or the ENTER button

on the remote control to execute the item. Then perform it

according to the following table.

GAMMA

[

CUSTOM 1

]

ENTER :

/'07=4)$?

+/#)'



5'672



#7&+1

2+%674'



+0276



126+10

5%4''0

5*#420'55



$4+)*60'55㧗

%1064#56㧗

%1.14㧗

6+06㧗

%1.146'/2



/+&

)#//#



&'(#7.6







5'.'%6



0'6914-

'#5;/'07

#%6+8'+4+567401((

/;/'/14;5#8'

(continued on next page)

26ViewSonic PJ1158

Item Description

COLOR TEMP

Using the ▲/▼ buttons switches the color temperature mode.

To adjust CUSTOM

Selecting a mode whose name includes CUS-

TOM and then pressing the ► button or the

ENTER button displays a dialog to aid you in

adjusting the OFFSET and GAIN of the selected

mode.

OFFSET adjustments change the color intensity

on the whole tones of the test pattern.

GAIN adjustments mainly affect color intensity

on the brighter tones of the test pattern.

Choose an item using the ◄/► buttons, and adjust the level using

the ▲/▼ buttons.

You can display a test pattern for checking the effect of your adjust

ment by pressing the ENTER button.

Each time you press the ENTER button, the pattern changes as

below.

No pattern

Gray scale of 9 steps

Ramp



Gray scale of 15 steps

• When this function is performed, lines or other distortion may ap-

pear.

COLOR

Using the ▲/▼ buttons adjusts the strength of whole color.

Strong

Weak

• This item can be selected only for a video signal, s-video or com-

ponent video signal.

TINT

Using the ▲/▼ buttons adjusts the tint.

Greenish

Reddish

• This item can be selected only for a video signal, s-video or com-

ponent video signal.

SHARPNESS

Using the ▲/▼ buttons adjusts the sharpness.

Strong

Weak

• There may be some noise and/or the screen may icker for a mo-

ment when an adjustment is made. This is not a malfunction.

PICTURE Menu

PICTURE Menu (continued)

COLOR TEMP [CUSTOM-1]

ENTER :

OFFSET

GAIN

HIGH DEFAULT

�

HIGH CUSTOM

�

MID DEFAULT

�

MID CUSTOM

LOW DEFAULT

�

LOW CUSTOM

�

Hi-BRIGHT-1 DEFAULT

�

Hi-BRIGHT-1 CUSTOM

Hi-BRIGHT-2 DEFAULT

�

Hi-BRIGHT-2 CUSTOM

(continued on next page)

27ViewSonic PJ1158

PICTURE Menu

Item Description

ACTIVE IRIS

Using the ▲/▼ cursor buttons changes the active iris control mode.

PRESENTATION

THEATER

TURN OFF

Feature

PRESENTATION

The active iris displays the best presentation im

age for both bright and dark scenes.

THEATER

The active iris displays the best theater image for

both bright and dark scenes.

TURN OFF The active iris is always open.

• The screen may icker when the PRESENTATION or THEATER

modes are selected. If this occurs select TURN OFF.

MY MEMORY

This projector has 4 memories for adjustment data (for all the items

of the PICTURE menu).

Selecting a function using the ▲/▼ buttons and pressing the ► or

ENTER button performs each function.

LOAD1

LOAD2

LOAD3

LOAD4

SAVE4

SAVE3

SAVE2

SAVE1

LOAD1, LOAD2, LOAD3, LOAD4

Performing a LOAD function loads the data from the memory linked

in the number included in the function’s name, and adjusts the pic

ture automatically depending on the data.

• The LOAD functions whose linked memory has no data are

skipped.

• Remember that the current adjusted condition will be lost by load

ing data. If you want to keep the current adjustment, please save it

before performing a LOAD function.

• There may be some noise and the screen may icker for a mo-

ment when loading data. This is not malfunction.

• The LOAD functions can be also performed by the MY MEMORY

button which can be set by the MY BUTTON item in OPTION menu.

SAVE1, SAVE2, SAVE3, SAVE4

Performing a SAVE function saves the current adjustment data into

the memory linked in the number included in the function’s name.

• Remember that the current data being stored of a memory will be

lost by saving a new data into the memory.

PICTURE Menu (continued)

28ViewSonic PJ1158

IMAGE Menu

Item Description

ASPECT

Using the ▲/▼ buttons switches the mode for aspect ratio.

For an RGB signal

NORMAL

4:3

16:9

SMALL

For an M1-D signal

NORMAL

4:3

16:9

14:9

SMALL

For a Video signal, S-video signal or Component video signal

4:3

16:9

14:9

SMALL

For no signal

4:3 (xed)

• The NORMAL mode keeps the original aspect ratio of the signal.

OVER SCAN

Using the ▲/▼ buttons adjusts the over-scan ratio.

Large (It reduces picture)

Small (It magnies picture)

•

This item can be selected only for a video, s-video and component signal.

• When this adjustment is too large, certain degradation may appear

at the frame area of the picture. In such a case, please adjust small.

V POSITION

Using the ▲/▼ buttons adjusts the vertical position.

Down

• Over-adjusting the vertical position may cause noise to appear

on the screen. If this occurs please reset the vertical position to the

default setting. Pressing the RESET button when the V POSITION

is selected will reset the V POSITION to the default setting.

• When this function is performed on a video signal, s-video signal,

or component video signal of 525i (480i) or 625i (576i), the range of

this adjustment depends on the OVER SCAN setting. It is not pos-

sible to adjust when the OVER SCAN is set to 10.

H POSITION

Using the ▲/▼ buttons adjusts the horizontal position.

Left

Right

•

Over-adjusting the horizontal position may cause noise to appear

on the screen. If this occurs please reset the horizontal position to the

default setting. Pressing the RESET button when the H POSITION is

selected will reset the H POSITION to the default setting.

• When this function is performed on a video signal, s-video signal,

or component video signal of 525i (480i) or 625i (576i), the range of

this adjustment depends on the OVER SCAN setting. It is not pos-

sible to adjust when the OVER SCAN is set to 10.

From the IMAGE menu, items shown in the table below

can be performed.

Select an item using the ▲/▼ cursor buttons on the

projector or remote control, and press the ► cursor button

on the projector or remote control, or ENTER button on

the remote control to execute the item. Then perform it

according to the following table.

/'07=4)$?

+/#)'



2+%674'







5'.'%6



#761#&,756':'%76'



#52'%6



18'45%#0



*2*#5'



*5+<'



*215+6+10











8215+6+10



5'672



+0276



5%4''0

126+10

#7&+1

0'6914-

'#5;/'07

(continued on next page)

29ViewSonic PJ1158

IMAGE Menu

Item Description

H PHASE

Using the ▲/▼ buttons adjusts the horizontal phase to eliminate icker.

Right

Left

• This item can be selected only for an RGB signal or a component

video signal. (except 525i (480i), 625i (576i), SCART RGB)

H SIZE

Using the ▲/▼ buttons adjusts the horizontal size.

Large

Small

• This item can be selected only for an RGB signal.

• When this adjustment is excessive, the picture may not be dis-

played correctly. In such a case, please reset the adjustment by

pressing the RESET button on the remote control during this opera

tion.

AUTO ADJUST

EXECUTE

Selecting this item performs the automatic adjustment feature.

For an RGB signal

The vertical position, the horizontal position, the horizontal phase

and the horizontal size will be automatically set to default. And the

aspect ratio will be automatically selected.

Make sure that the application window is set to its maximum size

prior to attempting to use this feature. A dark picture may still be

incorrectly adjusted. Use a bright picture when adjusting.

For an M1-D signal

The aspect ratio will be automatically set to default.

For a Video signal or S-video signal

The video format best suited for the respective input signal will be

selected automatically.

This function is available only when the AUTO mode is selected to

the VIDEO FORMAT item in INPUT menu. For a component video

signal, the signal type is identied automatically independently of

this function.

For a Video signal, S-video signal or Component video signal

The vertical position, horizontal position and aspect ratio will be

automatically set to default.

For a Component video signal

The horizontal phase will be automatically set to default.

• The automatic adjustment operation requires about 10 seconds.

Also please note that it may not function correctly with some input.

IMAGE Menu (continued)

30ViewSonic PJ1158

INPUT Menu

Item Description

PROGRESSIVE

Using the ▲/▼ buttons switches the progress mode.

FILM

TURN OFF

• This function is performed only for an interlaced signal of a VIDEO

input, an S-VIDEO input or COMPONENT VIDEO input of 525i

(480i), 625i (576i) or 1125i (1080i) signal.

• When TV or FILM is selected, the screen image will be sharp.

FILM adapts to the 2-3 Pull-Down conversion system. But these

may cause a certain defect (for example, jagged line) of the picture

for a quick moving object. In such a case, please select TURN OFF,

even though the screen image may lose the sharpness.

VIDEO NR

Using the ▲/▼ buttons switches the noise reduction mode.

HIGH

MID

LOW

• This function performs only at a VIDEO input, an S-VIDEO or

COMPONENT VIDEO input of 525i(480i), 625i(576i) or 1125i (1080i)

signal.

• When this function is excessive, it may cause a certain degrada-

tion of the picture.

3D-YCS

Using the ▲/▼ buttons switches the 3D-YCS mode.

STILL

MOVIE

TURN OFF

• This function performs only at a VIDEO input of NTSC, and PAL.

• MOVIE is the mode for images with a lot of motions like movies,

and STILL is the mode for images with few motions or completely

still ones like slides.

COLOR SPACE

Using the ▲/▼ buttons switches the mode for color space.

AUTO

RGB

SMPTE240

REC709

REC601

• This item can be selected only for an RGB signal or a component

video signal (except 525i (480i), 625i (576i) and SCART RGB).

• The AUTO mode automatically selects the optimum mode.

• The AUTO operation may not work well at some signals. In such a

case, it might be good to select a suitable mode except AUTO.

From the INPUT menu, items shown in the table below can

be performed.

Select an item using the ▲/▼ cursor buttons on the

projector or remote control, and press the ► cursor button

on the projector or remote control, or ENTER button on

the remote control to execute the item. Then perform it

according to the following table.

/'07=4)$? 



5'.'%6



8+&'1(14/#6#761

%1.1452#%'#761

&;%556+..

(4#/'.1%-674010



4'51.76+10

4)$+0

/&014/#.

%1/210'06%1/210'06

241)4'55+8'68

8+&'104/+&

+/#)'

2+%674'

5'672

+0276

5%4''0

126+10

#7&+1

0'6914-

'#5;/'07

(continued on next page)

31ViewSonic PJ1158

Item Description

COMPONENT

Using the ▲/▼ buttons switches the function of the COMPONENT

(Y, Cb/Pb, Cr/Pr) port.

COMPONENT

SCART RGB

When the SCART RGB is selected, the COMPONENT (Y, C

b/Pb,

Cr/Pr) and VIDEO ports will function as a SCART RGB port. A

SCART adapter or SCART cable is required for a SCART RGB

input to the projector. For details, contact your dealer.

VIDEO FORMAT

Set the video format for the s-video port and video port.

(1) Use th

e ◄/► buttons to select the input port.

(2) Using the ▲/▼ buttons switches the mode

for video format.

AUTO

NTSC

PAL

SECAM

N-PAL

M-PAL

NTSC4.43

• This item is performed only for a video signal

from the VIDEO port or the S-VIDEO port.

• The AUTO mode automatically selects the optimum mode.

• The AUTO operation may not work well for some signals. If the

picture becomes unstable (e.g. an irregular picture, lack of color),

please select the mode according to the input signal.

M1-D

Using the ▲/▼ cursor buttons changes the M1-D signal mode.

NORMAL

ENHANCED

Feature

NORMAL Suitable for DVD signals (16-235)

ENHANCED Suitable for VGA signals (0-255)

• If the contrast of the screen image is too strong or too weak, try

nding a more suitable mode.

INPUT Menu

INPUT Menu (continued)

8+&'1(14/#6

58+&'1

#761

065%

2#.

5'%#/

065%

/2#.

02#.

8+&'1

(continued on next page)

VIDEO

CONTROL

AUDIO IN 1

AUDIO IN 2

REMOTE

CONTROL

S-VIDEO

AUDIO

OUT

R L R L

AUDIO IN 3 AUDIO IN 4

RGB

OUT

RGB1 RGB2 M1-D

CB/PBY

CR/PR

LAN

SCART OUT

Video G B R

32ViewSonic PJ1158

Item Description

FRAME LOCK

Using the ▲/▼ buttons turns the frame lock function on/off.

TURN ON

TURN OFF

• This item can be performed only on an RGB signal with a vertical

frequency of 50 to 60 Hz.

• When the TURN ON is selected, a moving pictures are displayed

more smoothly.

• This function may cause a certain degradation of the picture. In

such a case, please select the TURN OFF.

RGB IN

Set the RGB input signal type for the RGB port.

(1) Use th

e ◄/► buttons to select the RGB

port to be set.

RGB1

RGB2

(2) Use the ▲/▼ buttons to select the RGB

input signal type.

SYNC ON G ON

SYNC ON G OFF

• Selecting the SYNC ON G ON turns the SYNC ON G mode on.

The SYNC ON G mode allows reception of a sync on G signal.

• In the SYNC ON G mode, the picture may be distorted with certain

input signals. In such a case, remove the signal connector so that

no signal is received and turn the SYNC ON G mode off, and then

reconnect the signal.

INPUT Menu

INPUT Menu (continued)

4)$+0

4)$

5;0%10)1((

5;0%10)10

4)$

(continued on next page)

33ViewSonic PJ1158

INPUT Menu

Item Description

RESOLUTION

The resolution for the RGB1 and RGB2 input signals can be set on

this projector.

(1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and

press the ► button.

The RESOLUTION menu will be displayed.

(2) In the RESOLUTION menu select the

resolution you wish to display using the ▲/▼

buttons.

Selecting AUTO will set a resolution appropri-

ate to the input signal.

(3) Pressing the ► or ENTER button when

selecting a STANDARD resolution will auto-

matically adjust the horizontal and vertical

positions, clock phase and horizontal size

and automatically select an aspect ratio. The

INFORMATION dialog will be displayed.

(4) To set a custom resolution use the ▲/▼

buttons to select the CUSTOM and the CUS-

TOM RESOLUTION BOX will be displayed.

Set the horizontal (HORZ) and vertical (VERT)

resolutions using the ▲/▼/◄/► buttons.

Although not all resolutions are guaranteed.

(5) To save the setting place the cursor on the

right-most digit and press the ► button.

The horizontal and vertical positions, clock

phase and horizontal size will be automati-

cally adjusted and an aspect ratio will be

automatically selected.

After the INFORMATION dialog has displayed

for about 10 seconds the screen will return

to the RESOLUTION menu displaying the

changed resolution.

(6) To revert back to the previous resolution

without saving changes place the cursor on

the left-most digit and press the ◄ button.

The screen will then return to the RESOLUTION menu displaying the previ-

ous resolution.

• For some pictures, this function may not work well.

INPUT Menu (continued)

4'51.76+10

56#0&#4&

%7561/

#761

Z

Z

Z

Z

RESOLUTION MENU

INFORMATION

RGB1

1280x 768@ 60

INFORMATION

RGB1

992x 744@ 60

4'51.76+10

56#0&#4&

%7561/

#761

Z

Z

Z

Z

%7561/4'51.76+10

5'6

*14<Z8'46

Z

37+6

CUSTOM RESOLUTION

BOX

34ViewSonic PJ1158

SETUP Menu

Item Description

AUTO KEY-

STONE

EXECUTE

Selecting this item performs the Automatic keystone distortion cor

rection. Projector automatically corrects vertical keystone distortion

due to the (forward/backward) setup angle by itself.

This function will be executed only once when selected in the Menu.

When the slant of the projector is changed, executes this function again.

• The adjustable range of this function will vary among inputs. For

some input, this function may not work well.

•

When V:INVERT or H&V:INVERT is selected to the MIRROR item in the

SETUP menu, if the projector screen is inclined or angled downward, this

function may not work correctly.

•

When the zoom adjustment is set to the TELE (telephoto focus), this

function may be excessive. This function should be used when the zoom

adjustment is set to the full WIDE (wide-angle focus) whenever possible.

•

When the projector is placed on the level (about ±3°), this function may not work.

• When the projector is inclined to near ±30 degree or over, this

function may not work well.

•

When the vertical lens shift is not set fully upward (not set fully downward for

the optional lens type FL-601 only), this function may not work well.

• When the horizontal lens shift is not set to the center, this function

may not work well.

•

This function will be unavailable when the Transition Detector is on.

KEYSTONE

Using the ▲/▼ buttons corrects the vertical keystone distortion.

Shrink the top of the image

Shrink the bottom of the image

• The adjustable range of this function will vary among inputs. For

some input, this function may not work well.

•

When the vertical lens shift is not set fully upward (not set fully downward for

the optional lens type FL-601 only), this function may not work well.

•

When the horizontal lens shift is not set to the center, this function may not work well.

•

This function will be unavailable when the Transition Detector is on.

KEYSTONE

Using the ▲/▼ buttons corrects the horizontal keystone distortion.

Shrink the right of the image

Shrink the left of the image

• The adjustable range of this function will vary among inputs. For

some input, this function may not work well.

•

When the horizontal lens shift is not set to the center, this function may not work well.

•

This function will be unavailable when the Transition Detector is on.

From the SETUP menu, items shown in the table below

can be performed.

Select an item using the ▲/▼ cursor buttons on the

projector or remote control, and press the ► cursor button

on the projector or remote control, or the ENTER button

on the remote control to execute the item. Then perform it

according to the following table.

/'07=4)$? 



5'.'%6



-';5610'

#761-';5610'':'%76'

9*+52'4014/#.

/+4414014/#.

-';5610'

+/#)'

2+%674'

5'672

+0276

5%4''0

126+10

#7&+1

0'6914-

'#5;/'07

(continued on next page)

35ViewSonic PJ1158

SETUP Menu

SETUP Menu (continued)

Item Description

WHISPER

Using the ▲/▼ buttons turns off/on the whisper mode.

NORMAL

WHISPER

• When the WHISPER is selected, acoustic noise and screen bright-

ness are reduced.

MIRROR

Using the ▲/▼ buttons switches the mode for mirror status.

NORMAL

H:INVERT

V:INVERT

H&V:INVERT

If the Transition Detector is TURN ON and MIRROR status is

changed, Transition Detector Alarm will be displayed when projector

is restarted after the power switch is turned off.

36ViewSonic PJ1158

AUDIO Menu

Item Description

VOLUME

Using the ▲/▼ buttons adjusts the volume.

High

Low

TREBLE

Using the ▲/▼ buttons adjusts the treble level.

High

Low

BASS

Using the ▲/▼ buttons adjusts the bass level.

High

Low

SRS WOW

Using the ▲/▼ buttons switches the mode for SRS WOW mode.

HIGH

MID

OFF

• SRS WOW™ accomplishes this by providing a panoramic three-

dimensional audio image that extends the sound eld in both the

horizontal and vertical planes, and lowers the perceived bass

response well beyond the low frequency limitations of the drivers.

Adjust it depending on the user’s preference.

SPEAKER

Using the ▲/▼ buttons turns the speaker function on/off.

TURN ON

TURN OFF

• When the TURN ON is selected the built-in speaker works.

AUDIO

Allocates the audio ports.

(1) Choose a picture input port using the ▲/▼

buttons.

RGB1

RGB2

M1-D

VIDEO

S-VIDEO

COMPONENT

(2) Select the audio port to be interlocked with

the input port using the ◄/► buttons.

When is selected to an input port, any audio ports do not work

interlocking with the input port, and any items in AUDIO menu are

invalid.

From the AUDIO menu, items shown in the table below can

be performed.

Select an item using the ▲/▼ cursor buttons on the

projector or remote control, and press the ► cursor button

on the projector or remote control, or ENTER button on

the remote control to execute the item. Then perform it

according to the following table.

/'07=4)$?

+/#)'



2+%674'



+0276



126+10

0'6914-

'#5;/'07

5%4''0





5'.'%6



81.7/'

64'$.'

$#55

545919

52'#-'4

#7&+1







/+&

674010

5'672

#7&+1





4)$

/&

37+6



4)$



58+&'1

8+&'1

%1/210'06

  

NOTE • The speaker sound may distorted or the case may be trembling

when the volume is too high or treble/bass is emphasized or WOW is activated.

In that case, make the volume reduced, bass/treble low or WOW effect to be

weakend.

37ViewSonic PJ1158

SCREEN Menu

Item Description

LANGUAGE

Using the ▲/▼ buttons switches the OSD (On Screen Display) language.

SUOMI ó POLSKI ó TÜRKÇE

ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO

NORSK ó NEDERLANDS ó PORTUGUÊS ó 日本語

ó ó ó SVENSKA ó

MENU POSITION

Using the ◄/►/▲/▼ buttons adjusts the menu position.

To quit the operation, press the MENU button on the remote control

or keep no operation for about 10 seconds.

BLANK

Using the ▲/▼ buttons switches the mode for the blank screen.

The blank screen is a screen for the temporarily blanking feature. It

is displayed by pressing the BLANK button on the remote control.

MyScreen

ORIGINAL

BLUE

WHITE

BLACK

Feature

MyScreen Screen can be registered by the MyScreen item.

ORIGINAL Screen preset as the standard screen.

BLUE, WHITE,

BLACK

Plain screens in each color.

• To avoid remaining as an afterimage, the MyScreen or ORIGINAL

screen will change to the plain black screen after several minutes.

From the SCREEN menu, items shown in the table below

can be performed.

Select an item using the ▲/▼ cursor buttons on the

projector or remote control, and press the ► cursor button

on the projector or remote control, or ENTER button on

the remote control to execute the item. Then perform it

according to the following table.

/'07=4)$? 



5'.'%6



.#0)7#)''0).+5*



/'07215+6+10



56#467214+)+0#.





/[5ETGGP

/[5ETGGP.QEM67401((

5174%'0#/'

/'55#)'674010

$.#0-$.#%-

+/#)'

2+%674'

5'672

+0276

5%4''0

126+10

#7&+1

0'6914-

'#5;/'07

(continued on next page)

38ViewSonic PJ1158

SCREEN Menu

Item Description

START UP

Using the ▲/▼ buttons switches the mode for the start-up screen.

The start-up screen is a screen displayed when no signal or an

unsuitable signal is detected.

MyScreen

ORIGINAL

TURN OFF

Feature

MyScreen Screen can be registered by the MyScreen item.

ORIGINAL Screen preset as the standard screen.

TURN OFF Plain black screen.

• To avoid remaining as an afterimage, the MyScreen or ORIGINAL

screen will change to the BLANK screen after several minutes. If

also the BLANK screen is the MyScreen or ORIGINAL, the plain

black screen is instead used.

• When the TURN ON is selected to the MyScreen PASSWARD

of SECURITY item in OPTION menu, the START UP is fixed to

MyScreen.

SCREEN Menu (continued)

(continued on next page)

39ViewSonic PJ1158

SCREEN Menu

Item Description

MyScreen

This item allows you to capture an image for use as a MyScreen

image which can be used as the BLANK screen and START UP

screen. Display the image you want to capture before executing the

following procedure.

1. Selecting this item displays a dialog

titled “MyScreen”. It will ask you if you

start capturing an image from the cur

rent screen.

Please wait for the target image to be displayed, and press the

ENTER button on the remote control when the image is dis

played. The image will freeze and the frame for capturing will

appear.

To stop performing, press the RESET or ESC button on the re

mote control.

2. Using the ▲/▼/◄/► buttons adjusts

the frame position.

Please move the frame to the position

of the image which you want to use. The

frame may not be able to be moved for

some input signals.

To start registration, press the ENTER

button on the remote control.

To restore the screen and return to the previous dialog, press the

RESET or ESC button on the remote control.

Registration takes several minutes.

When the registration is completed, the registered screen and the

following message is displayed for several seconds:

“MyScreenregistrationisnished.”

If the registration failed, the following message is displayed:

“Acapturingerrorhasoccurred.Pleasetryagain.”

• This item cannot be selected for an M1-D signal.

• This function cannot be selected when the TURN ON is selected

to the MyScreen Lock item.

• This function cannot be selected when the TURN ON is selected

to the MyScreen PASSWARD of SECURITY item in OPTION menu.

MyScreen Lock

Using the ▲/▼ buttons turns on/off the MyScreen lock function.

TURN ON

TURN OFF

When the TURN ON is selected, the item MyScreen is locked. Use

this function for protecting the current MyScreen.

• This function cannot be selected when the TURN ON is selected

to the MyScreen PASSWARD of SECURITY item in OPTION menu.

SCREEN Menu (continued)

/[5ETGGP

&Q[QWUVCTVECRVWTKPIVJKURKEVWTG!

01;'5

'5%

'06

/[5ETGGP

/QXGVJGECRVWTGCTGC

CU[QWYCPV

4'67400':6

4'5'6 '06'4

/[5ETGGP



(continued on next page)

40ViewSonic PJ1158

SCREEN Menu

Item Description

MESSAGE

Using the ▲/▼ buttons turns on/off the message function.

TURN ON

TURN OFF

When the TURN ON is selected, the following message function works.

“AUTO IN PROGRESS” while automatically adjusting

“NO INPUT IS DETECTED”

“SYNC IS OUT OF RANGE”

“Searching….” while searching for the input

“Detecting….” while an input signal is detected

The indication of the input signal displayed by changing

The indication of the aspect ratio displayed by changing

The indication of the PICTURE MODE displayed by changing

The indication of the ACTIVE IRIS displayed by changing

The indication of the MY MEMORY displayed by changing

The indication of “FREEZE” and “II” while freezing the screen by

pressing the FREEZE button.

• When the TURN OFF is selected, please remember if the picture

is freezing. Do not mistake freezing for a malfunction.

SOURCE NAME

Each input port for this projector can have a name applied to it.

(1) Use the

▲/▼

buttons on the SCREEN menu to

select SOURCE NAME and press the

►

button.

The SOURCE NAME menu will be displayed.

(2) Use the ▲/▼ buttons on the SOURCE

NAME menu to select the port to be named

and press the ► button. Right side of the

menu is blank until a name is specied.

The SOURCE NAME dialog will be displayed.

(3) The current name will be displayed on the

rst line. Use the

▲/▼/◄/►

buttons and the

ENTER or INPUT button to select and enter

characters. The RESET button can be used to

erase 1 character at a time. The name can be a

maximum of 16 characters.

(4) To change an already inserted character, press

the

▲

button while the cursor is on the [A-N]

row to move the cursor to the name displayed on

the rst line and use the

◄/►

buttons to select

character to be changed. Once a character in the

name is selected use the

▼

button to move the

cursor back down to the character entry area to

select and enter characters as described above.

(5) Select

and press the ENTER or IN-

PUT buttons when nished entering text.

To revert to the previous name without sav

ing changes press the ESC or ◄ button and

the INPUT button simultaneously.

SCREEN Menu (continued)

0#/'4)$

4)$

#$%&'()*+,-./0

123456789:;<

CDEFGHIJKLMNOP

QRSTUVWXYZ[\



A!

5'.'%6



'06'40':6'5%37+6

5174%'0#/'

4)$

4)$&'5-6122%

%1/210'06&8&

58+&'1%#/'4#

8+&'1864

0#/'4)$

4)$

#$%&'()*+,-./0

123456789:;<

CDEFGHIJKLMNOP

QRSTUVWXYZ[\



A!

5'.'%6



'5%37+6

0#/'4)$

4)$

#$%&'()*+,-./0

123456789:;<

CDEFGHIJKLMNOP

QRSTUVWXYZ[\



A!

5'.'%6



'06'40':6'5%37+6

41ViewSonic PJ1158

OPTION Menu

Item Description

AUTO SEARCH

Using the ▲/▼ buttons turns on/off the automatic signal search func-

tion.

TURN ON

TURN OFF

When the TURN ON is selected, detecting no signal automatically cycles

through input ports in the following order. The search is started from the

current port. Then when an input is found, the projector will stop searching

and display the image.

RGB 1

RGB 2

M1-D

COMPONENT

S-VIDEO

VIDEO

AUTO KEY-

STONE

Using the ▲/▼ buttons turns on/off the automatic keystone function.

TURN ON

TURN OFF

TURN ON : Automatic keystone distortion correction will be execut

ed whenever changing the slant of the projector.

TURN OFF : This function is disabled. Please execute the AUTO

KEYSTONE EXECUTE in the SETUP Menu for automatic key-

stone distortion correction.

• When the projector is suspended from the ceiling this feature will

not function properly so select the TURN OFF.

• This function will be unavailable when the Transition Detector is

on.

AUTO ON

Using the ▲/▼ buttons turns on/off the AUTO ON function.

TURN ON

TURN OFF

When set to the TURN ON, the lamp in projector will be automatically

turned on without the usual procedure, only when the projector is supplied

with the power.

• This function does not work as long as the power has been supplied to

the projector while the lamp is off.

• After turning the lamp on by the AUTO ON function, if neither input nor

operation is detected for about 30 minutes, the projector is turned off, even

though the AUTO OFF function is disabled.

From the OPTION menu, items shown in the table below can be

performed.

Select an item using the ▲/▼ cursor buttons on the projector or

remote control, and press the ► cursor button on the projector or

remote control, or ENTER button on the remote control to execute

the item, except for the items LAMP TIME and FILTER TIME.

Then perform it according to the following table.

/'07=4)$? 



5'.'%6





#7611((OKP

.#/26+/'J

(+.6'46+/'J

#7615'#4%*67401((



#761-';5610'

67401((

#7611067401((

/;$76610

5'48+%'

5'%74+6;

+/#)'

2+%674'

5'672

+0276

5%4''0

126+10

#7&+1

0'6914-

'#5;/'07

(continued on next page)

42ViewSonic PJ1158

Item Description

AUTO OFF

Using the ▲/▼ buttons adjusts the time to count down to automati-

cally turn the projector off.

Long (max. 99 minutes)

Short (min. 0 minute = DISABLE)

AUTO OFF

ENABLE

AUTO OFF

DISABLE

When the time is set to 0, the projector is not turned off automati-

cally.

When the time is set to 1 to 99, and when the passed time with no-

signal or an unsuitable signal reaches at the set time, the projector

lamp will be turned off.

If one of the projector’s buttons or the remote control buttons is

pressed or one of the commands (except get commands) is trans-

mitted to the control port during the corresponding time, projector

will not be turned off.

Please refer to the section “Turning off the power”.

LAMP TIME

The lamp time is the time counted after the last resetting. It is

shown in the OPTION menu as the usage time of the lamp.

Pressing the RESET button on the remote control or the ► button

of the projector displays a dialog.

To reset the lamp time, select the RESET using the ▲ button.

RESET



CANCEL

• Please reset the lamp time only when you have replaced the lamp,

for a suitable indication about the lamp.

• For the lamp replacement, see the section “Lamp”.

FILTER TIME

The lter time is the time counted after the last resetting. It is shown

in the OPTION menu as the usage time of the air lter.

Pressing the RESET button on the remote control or the ► button

of the projector displays a dialog.

To reset the lter time, select the RESET using the ▲ button.

RESET



CANCEL

•

Please reset the lter time only when you have cleaned or replaced

the air lter, for a suitable indication about the air lter.

• For the air lter cleaning, see the section “Air lter”.

OPTION Menu

OPTION Menu (continued)

(continued on next page)

43ViewSonic PJ1158

Item Description

MY BUTTON

This item is to assign one of the following function to MY BUTTON

1 and 2 on the remote control.

Choose 1 or 2 on the MY BUTTON menu using the ◄/► button

rst. Then using the ▲/▼ buttons sets one of the following func-

tions to the chosen button.

• RGB1: Sets port to RGB1.

• RGB2: Sets port to RGB2.

• M1-D: Sets port to M1-D.

• COMPONENT: Sets port to COMPONENT (Y, C

b/Pb, Cr/Pr).

• S-VIDEO: Sets port to S-VIDEO.

• VIDEO: Sets port to VIDEO.

• e-SHOT: Displays the e-SHOT menu.

•

INFORMATION: Displays a dialog of INPUT INFORMATION

• AUTO KEYSTONE

EXECUTE:

Performs automatic keystone distortion correction.

• MY MEMORY:

Loads one of adjustment data stored.

•

When the current adjustment is not saved to memory a dialog is displayed.

If you want to keep the current adjustment, please press the ◄

button to quit. Otherwise the current adjusted condition will be lost

by loading a data.

• PICTURE MODE: Changes the PICTURE MODE

• FILTER RESET:

Displays the lter time reset conrmation dialogue.

• ACTIVE IRIS: Changes the active iris mode.

• VOLUME+: Set the volume up.

• VOLUME-: Set the volume down.

SERVICE

Selecting this item displays the SERVICE menu.

Select an item using the ▲/▼ buttons, and press the ► button or

the ENTER button on the remote control to execute the item.

FAN SPEED

AUTO ADJUST

GHOST

FILTER MESSAGE

LENS TYPE

KEY LOCK

FACTORY RESET

INFORMATION

REMOTE FREQ.

REMOTE RECEIV.

FAN SPEED

Using the ▲/▼ buttons switches the rotation speed

of the cooling fans. The HIGH is the mode for use at

highlands etc. Note that the projector is noisier when

the HIGH is selected.

HIGH

NORMAL

OPTION Menu (continued)

OPTION Menu

6GORQTCT[EQPFKVKQP

/'/14;4GECNNUCXGFRCTCOGVGTU

3WKV

0QUCXGFFCVC

(#052''&

*+)*

014/#.

(continued on next page)

44ViewSonic PJ1158

Item Description

SERVICE

AUTO ADJUST

Using the ▲/▼ buttons enables/disables the automat-

ic adjustment.When DISABLE is selected, the auto

matic adjustment feature is disabled, although rough

adjustment is automatically performed depending on

the basic setting.

ENABLE

DISABLE

• Depending on conditions, such as input image, signal cable to

the projector, environment around the projector, etc., the automatic

adjustment may not work correctly. In such a case, please choose

DISABLE to disable the automatic adjustment, and make adjust

ment manually.

GHOST

1. Select a color element of ghost using the ◄/► but

tons.

Adjust the selected element using the ▲/▼ buttons to

disappear ghost.

FILTER MESSAGE

Use the ▲/▼ button to set the timer for the interval to

show the message for cleaning up the air lter.

50h

100h

200h

300h

TURN OFF

After selecting “50h”, “100h”, “200h”, or “300h”, the

message “REMINDER

***

HRS PASSED AFTER THE

LAST FILTER CHECK” will appear after the timer

reaches the interval time set by the menu.

When the “TURN OFF” is chosen, the air lter clean-

ing message will not appear.

• Please check and clean the air lter periodically, even if there is no

message. If the air lter becomes to be blocked by dust or others,

the internal temperature will rise, which could cause malfunction, or

reduce the lifetime of the projector.

• It is recommended to choose “100h” in general. Please be careful

with the operating environment of the projector and the condition of

the air lter, especially when the “200h”, “300h” or “TURN OFF” is

chosen.

LENS TYPE

Select the lens type currently used using the ▲/▼

buttons.

Please select one of them referring to the following.

1: for a standard lens (Type NL-600)

2: for a xed short throw lens (Type FL-601)

3: for a short throw lens (Type SL-602)

4: for a long throw lens (Type LL-603)

5: for an ultra long throw lens (Type UL-604)

• This setting has an inuence on the keystone distortion etc.

• About the optional lens, ask you dealer.

OPTION Menu (continued)

OPTION Menu

#761#&,756

'0#$.'

&+5#$.'

  

)*156

4 ) $

(+.6'4/'55#)'

J

J

J

J

67401((

.'056;2'











(continued on next page)

45ViewSonic PJ1158

Item Description

SERVICE

KEY LOCK

Using the ▲/▼ buttons turns on/off the key lock feature. When

TURN ON is selected, the buttons on the projector except the

STANDBY/ON button are locked.

TURN ON

TURN OFF

• Please use to avoid a mischief and touching accidentally. This

function does not have any effect on the remote control.

REMOTE RECEIV.

(1) Select a remote sensor using the ▲/▼ button.

1:FRONT

2:TOP

3:REAR

(2) Switch it using the ENTER button

(off)

(on)

• A sensor cannot be turned off when the other

two are off. Always at least one sensor is on.

REMOTE FREQ.

Use the ▲/▼ button to change the Projector’s remote sensor set-

ting

1:NORMAL

2:HIGH

Items with a checkmark are on. The factory

default setting is for both 1:NORMAL and 2:

HIGH to be on. If the remote control does not

function correctly set the this to either only 1

or only 2 as described in Remote Control Set

tings

Neither can be turned off at the same time.

INFORMATION

Selecting this item displays a dialog titled “INPUT INFORMATION”.

It shows the information about the current input.

INPUT-INFORMATION

RGB1

1024x768 @60Hz

FRAME LOCK

INPUT-INFORMATION

S-VIDEO

SECAM

AUTO

INPUT-INFORMATION

COMPONENT

576i @50

SCART RGB

• The “FRAME LOCK” message on the dialog means the frame lock

function is working.

• The “SCART RGB” message means the COMPONENT VIDEO

port is working as a SCART RGB input port. Please refer to the

COMPONENT item in INPUT menu.

• This item can’t be selected for no signal and sync out.

FACTORY RESET

Selecting RESET using the button ▲ performs this function. By this

function, all the items in all of menus will collectively return to the

initial setting. Note that the items LAMP TIME, FILTER TIME, LAN

GUAGE and SECURITY are not reset.

RESET



CANCEL

OPTION Menu (continued)

OPTION Menu

(4106

612

4'/16'4'%'+8

'06'4

4'#4

㪜㪥㪫㪜㪩

(continued on next page)

4'/16'(4'3

014/#.

*+)*

'06'4

㪜㪥㪫㪜㪩

46ViewSonic PJ1158

Item Description

SECURITY

This projector is equipped with security functions.

User registration is required before using the security functions.

Please contact your local dealer.

1. Using Security Features

1.1 Inputting the PASSWORD

1.1-1 Use the ▲/▼ buttons on the OPTION menu

to select SECURITY and press the ► but-

ton. The ENTER PASSWORD box will be

displayed. The factory default PASSWORD is

5201. This PASSWORD can be changed (1.2

Changing the PASSWORD).

• It is strongly recommended the factory default

PASSWORD to be changed as soon as possible.

1.1-2 Use the ▲/▼/◄/► buttons to enter the

registered PASSWORD. Move the cursor to

the right side of the ENTER PASSWORD

BOX and press the ► button to display the

SECURITY menu. If an incorrect PASSWORD

is input the ENTER PASSWORD BOX will be

displayed again. If incorrect PASSWORD is

input 3 times the projector will turn off. After-

wards the projector will turn off every time an

incorrect PASSWORD is input.

1.2 Changing the PASSWORD

1.2-1 Use the ▲/▼ buttons on the SECURITY menu

to select SECURITY PASSWORD CHANGE

and press the ► button to display the ENTER

NEW PASSWORD BOX.

1.2-2 Use the ▲/▼/◄/► buttons to enter the new

PASSWORD.

1.2-3 Move the cursor to the right side of the EN-

TER NEW PASSWORD BOX and press the

► button to display the NEW PASSWORD

AGAIN BOX, enter the same PASSWORD

again.

1.2-4 Move the cursor to the right side of the NEW

PASSWORD AGAIN BOX and press the ►

button and the NOTE NEW PASSWORD BOX

will be displayed for about 20 seconds, please

make note of the PASSWORD during this

time. Pressing the ENTER button on the re-

mote controll or INPUT button on the projector

will close the NOTE NEW PASSWORD BOX.

• Please do not forget your PASSWORD.

OPTION Menu (continued)

OPTION Menu

5'%74+6;

'06'42#55914&

0':6



37+6

ENTER PASSWORD

BOX

5'%74+6;





5'%74+6;2#55914&%*#0)'

/[5ETGGP2#55914&67401((

2+0.1%-67401((

64#05+6+10&'6'%614

67401((

SECURITY MENU

5'%74+6;

'06'40'92#55914&

0':6



37+6

ENTER NEW PASSWORD

BOX

5'%74+6;

0'92#55914&#)#+0



%#0%'.

NEW PASSWORD

AGAIN BOX

5'%74+6;

016'0'92#55914&

':+6



'06'4

NOTE NEW PASS-

WORD BOX

(continued on next page)

47ViewSonic PJ1158

Item Description

SECURITY

1.3 If you have forgotten your PASSWORD

1.3-1 Follow the procedure in 1.1-1 to display the

ENTER PASSWORD BOX.

1.3-2 While the ENTER PASSWORD BOX is

displayed, press and hold the RESET button

on the remote control for about 3 seconds or

press and hold the INPUT and ► buttons on

the projector for about 3 seconds.

The 10 digit Inquiring Code will be displayed.

NOTE: If there is no key input for about 55 seconds

while the Inquiring Code is displayed the menu will

close. If necessary repeat the process from 1.3-1.

1.3-3 Contact ViewSonic with the 10 digit Inquiring Code. Your PASSWORD

will be sent after your user registration information is conrmed.

2. Using the MyScreen PASSWORD Function

The MyScreen PASSWORD function can be used to prohibit access to the

MyScreen function and prevent the currently registered MyScreen image

from being overwritten.

2.1 Turning on the MyScreen

PASSWORD

Function

2.1-1 Use the ▲/▼ buttons on the SECURITY

menu to select MyScreen PASSWORD and

press the ► button to display the MyScreen

PASSWORD on/off menu.

2.2 Setting the PASSWORD

2.2-1 Display the MyScreen on/off menu using the

procedure in 2.1-1.

2.2-2 Use the ▲/▼ buttons on the MyScreen PASS-

WORD on/off menu to select TURN ON.

The ENTER PASSWORD BOX (small) will be dis-

played.

2.2-3 Use the ▲/▼/◄/► buttons to enter the PASS-

WORD. Move the cursor to the right side of

the ENTER PASSWORD BOX (small) and

press the ► button to display the CHECK

PASSWORD BOX, enter the same PASS-

WORD again.

5'%74+6;2#55914&





+PSWKTKPI%QFG



OPTION Menu (continued)

OPTION Menu

/[5ETGGP

'06'42#55914&

0':6



37+6

Inquiring Code

(PASSWORD)

/[5ETGGP

%*'%-2#55914&

0':6



37+6

CHECK PASSWORD

BOX

/[5ETGGP2#55914&

674010

67401((

MyScreen PASSWORD

on/off menu

ENTER PASSWORD

BOX (small)

(continued on next page)

48ViewSonic PJ1158

Item Description

SECURITY

2.2-4 Move the cursor to the right side of the

CHECK PASSWORD BOX and press the ►

button to display the PASSWORD for about

20 seconds, please make note of the PASS-

WORD during this time.

Pressing the ENTER button on the remote con-

trol or INPUT button on the projector will return to

MyScreen PASS WORD on/off menu.

When a PASSWORD is set for MyScreen:

•

The MyScreen registration function (and menu) will be unavailable.

•

The MyScreen Lock function (and menu) will be unavailable.

•

The START UP setting will be locked on MyScreen (and the menu will be

unavailable).

Turning the MyScreen PASSWORD off will allow normal operation of both

functions.

•

Please do not forget your MyScreen PASSWORD.

2.3 Turning the PASSWORD off

2.3-1 Follow the procedure in 2.1-1 to display the MyScreen PASSWORD

on/off menu.

2.3-2 Select TURN OFF to display the ENTER PASSWORD BOX (large).

Enter the registered PASSWORD and the screen will return to the

MyScreen on/off menu.

If an incorrect PASSWORD is input the menu will close. If necessary repeat

the process from 2.3-1.

2.4 If you have forgotten your PASSWORD

2.4-1 Follow the procedure in 2.1-1 to display the MyScreen PASSWORD

on/off menu.

2.4-2 Select TURN OFF to display the ENTER

PASSWORD BOX (large). The 10 digit Inquir-

ing Code will be displayed inside the BOX.

2.4-3 Contact ViewSonic with the 10 digit Inquiring

Code. Your PASSWORD will be sent after

your user registration information is conrmed.

3. Using the PIN LOCK Function

PIN LOCK is a function which prevents the projector from being used unless

a registered Code is input.

3.1 Registering the PIN Code

3.1-1 Use the ▲/▼ buttons on the SECURITY menu

to select PIN LOCK and press the ► button

or the ENTER button to display the PIN LOCK

on/off menu.

3.1-2 Use the ▲/▼ buttons on the PIN LOCK on/off

menu to select TURN ON and the PIN BOX

will be displayed.

0':637+6

+PSWKTKPI%QFG

    



/[5ETGGP

'06'42#55914&

OPTION Menu (continued)

OPTION Menu

/[5ETGGP

%1/2.'6'

':+6



'06'4

ENTER PASSWORD BOX

(large)

PASSWORD BOX

2+0.1%-

674010

67401((

PIN LOCK on/off

(continued on next page)

49ViewSonic PJ1158

Item Description

SECURITY

3.1-3 Input a 4 part PIN Code using the ▲/▼/◄/►

/RGB and INPUT buttons.

A CONFIRMATION BOX will appear. Reenter the

same PIN Code. This will complete the PIN Code

registration.

NOTE: If there is no key input for about 55 seconds

while the PIN BOX or the CONFIRMATION BOX are

displayed the menu will close. If necessary repeat

the process from 3.1-1.

Afterwards, anytime the projector is restarted after

the power switch is turned off the PIN BOX will be

displayed. Enter the registered PIN Code.

The projector can be used after entering the regis-

tered PIN Code. If an incorrect PIN Code is input

the PIN BOX will be displayed again.

If an incorrect PIN Code is input 3 times the projector will turn off. Afterwards

the projector will turn off every time an incorrect PIN Code is input. The pro-

jector will also turn off if there is no key input for about 5 minutes while the

PIN BOX is displayed.

This function will activate only when the projector is started after the power

switch was turned off.

•

Please do not forget your PIN Code.

3.2 Turning Off the PIN LOCK Function

3.2-1 Follow the procedure in 3.1-1 to display the PIN LOCK on/off menu.

Use the ▲/▼ buttons to select TURN OFF and the PIN BOX will be

displayed.

Enter the registered PIN Code to turn the PIN LOCK function off.

If an incorrect PASSWORD is entered the menu will close.

3.3 If you have forgotten your PIN Code

3.3-1 While the PIN BOX is displayed, press and

hold the RESET button for three seconds or

press and hold the INPUT and ► buttons for

three seconds. The 10 digit Inquiring Code will

be displayed.

NOTE: If there is no key input for about 5 minutes

while the Inquiring Code is displayed the projector

will turn off.

3.3-2 Contact ViewSonic with the 10 digit Inquiring Code. Your PASSWORD

will be sent after your user registration information is conrmed.

OPTION Menu (continued)

OPTION Menu

PIN BOX

2+0$1:

4)$





+PRWV2+0%QFG



CONFIRMATION BOX

(PIN BOX)

2+0$1:

4)$





%QPHKTOCVKQP



2+0$1:





+PSWKTKPI%QFG



Inquiring Code

(PIN Code)

(continued on next page)

50ViewSonic PJ1158

Item Description

SECURITY

4. Using the Transition Detector Function

While the Transition Detector function is ON, when power switch is started to

supply to the projector, it might react as below.

• Transition Detector alarm shown below might appear on screen, if the pro-

jector has been moved or re-installed.

• Transition Detector alarm might appear on screen, if the MIRROR setting

has been changed.

• Keystone adjustment feature has been prohibited as long as the Transition

Detector function is ON.

4.1 Turning On the

Transition Detector

Function

4.1-1

Use the ▲/▼ buttons on the SECURITY menu to

select Transition Detector and press the ► or the

ENTER button to display the Transition Detector

on/off menu. Select TURN ON and the current

angle and mirror setting will be recorded.

NOTE: This feature may not function properly if the projector

is not in a stable position when TURN ON is selected.

4.1-2

If this function is set to TURN ON when the

vertical angle of the projector or mirror setting

at which the projector is turned on is different

than the previously recorded the Transition De-

tector Alarm will be displayed and the projector

will not display the input signal.

If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off.

This function will activate only when the projector is started after the power

switch was turned off.

4.2 Setting the

Transition Detector

PASSWORD

4.2-1 Use the ▲/▼ buttons on the SECURITY menu to select Transition De-

tector and press the ► or the ENTER button to display the Transition

Detector on/off menu.

4.2-2 Use the ▲/▼ buttons on the Transition

Detector on/off menu to select TURN ON.

The ENTER PASSWORD BOX (small) will be

displayed.

4.2-3 Use the ▲/▼/◄/► buttons to enter a PASS

WORD. Move the cursor to the right side of

the ENTER PASSWORD BOX (small) and

press the ► button to display the CHECK

PASSWORD BOX, enter the same PASS-

WORD again.

4.2-4 Move the cursor to the right side of the

CHECK PASSWORD BOX and press the ►

button to display the PASSWORD for about

20 seconds, please make note of the PASS-

WORD during this time.

Pressing the ENTER button on the remote control or

the INPUT button on the projector will return to the

Transition Detector on/off menu.

• Please do not forget your Transition Detector PASSWORD.

OPTION Menu (continued)

OPTION Menu

64#05+6+10&'6'%614

674010

67401((

Transition Detector

on/off menu

Transition Detector

Alarm

2+0$1:





64#05+6+10&'6'%61410

6JGRTQLGEVQTJCUDGGPVTCPUHGTTGF

HTQORTGXKQWUN[KPUVCNNGFRQUKVKQP

+H[QWYKUJVQJCXGCUSWCTGKOCIG

QPUETGGPCICKP

FKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW

64#05+6+10&'6'%614

'06'42#55914&

0':6



37+6

ENTER PASSWORD

BOX (small)

64#05+6+10&'6'%614

%*'%-2#55914&

0':6



37+6

CHECK PASSWORD

BOX

64#05+6+10&'6'%614

%1/2.'6'

':+6



'06'4

PASSWORD BOX

(continued on next page)

51ViewSonic PJ1158

Item Description

SECURITY

4.3 Setting the Transition Detector off

4.3-1 Follow the procedure in 4.1-1 to display the Transition Detector on/off

menu.

4.3-2 Select TURN OFF to display the ENTER PASSWORD BOX (large).

Enter the registered PASSWORD and the screen will return to the

Transition Detector

on/off menu.

If an incorrect PASSWORD is input the menu will close. If necessary repeat

the process from 4.3-1.

4.4 If you have forgotten your PASSWORD

4.4-1 Follow the procedure in 4.1-1 to display the Transition Detector on/off

menu.

4.4-2 Select TURN OFF to display the ENTER

PASSWORD BOX (large). The 10 digit Inquir-

ing Code will be displayed inside the BOX.

4.4-3 Contact ViewSonic with the 10 digit Inquiring

Code. Your PASSWORD will be sent after your

user registration information is conrmed.

OPTION Menu (continued)

OPTION Menu

0':637+6

+PSWKTKPI%QFG

    



64#05+6+10&'6'%614

'06'42#55914&

ENTER PASSWORD BOX

(large)

52ViewSonic PJ1158

NETWORK Menu

/'07=4)$? 5'.'%6



+2#&&4'55



57$0'6/#5-

6+/'&+(('4'0%'



&*%2



674010

&'(#7.6)#6'9#;



&#6'#0&6+/'

G5*16



+0(14/#6+10



5'48+%'

+/#)'

2+%674'

5'672

+0276

5%4''0

126+10

#7&+1

0'6914-

'#5;/'07

NETWORK Menu

Item Description

DHCP (Dynamic

HostCongura

tion Protocol)

DHCP TURN ON/TURN OFF:

Use the ▲/▼ buttons to turn DHCP on/off

TURN ON

TURN OFF

Select TURN OFF when the network does not have DHCP en

abled.

IP ADDRESS

Entering the IP ADDRESS :

Use the

▲/▼/◄/► buttons to enter the IP

ADDRESS. This function can only be used

when DHCP is set to “TURN OFF”.

• The IP ADDRESS is the number that identies this projector on

the network. You cannot have two devices with the same IP AD

DRESS on the same network.

SUBNET MASK

Entering the SUBNET MASK :

Use the

▲/▼/◄/► buttons to enter the

same SUBNET MASK used by your PC.

This function can only be used when DHCP

is set to “TURN OFF”.

DEFAULT GATE-

WAY

Entering the DEFAULT GATEWAY :

Use the

▲/▼/◄/►

buttons to enter the DE-

FAULT GATEWAY (a node on a computor net

work that serves as an access point to another

network) address.This function can only be

used when DHCP is set to “TURN OFF”.

Consult with your network administrator before connecting to an

existing access point on your network. Incorrect network settings

on this projector may cause trouble on the network.

Select “NETWORK” from the main menu to access the following

functions.

Select an item using the ▲/▼ cursor buttons on the projector or

remote control, and press the ► cursor button on the projector or

remote control, or ENTER button on the remote control to execute

the item. Then perform it according to the following table.

NOTE • The factory default setting for DHCP is “TURN ON”. There is no need to set

up [DHCP], [IP ADDRESS], [SUBNET MASK] or [DEFAULT GATEWAY] if your network

has DHCP enabled.

• If you are not utilizing SNTP, then you must set the DATE AND TIME during the initial

installation. Please refer to the item DATE AND TIME on the following list.

&*%2

674010

67401((

192. 168. 254

IP ADDRESS

255. 255. 0

SUBNET MASK

255.

0. 0. 0

DEFAULT GATEWAY

(continued on next page)

53ViewSonic PJ1158

NETWORK Menu

Item Description

TIME DIFFER-

ENCE

Entering the TIME DIFFERENCE :

Use the

▲/▼ buttons to enter the

TIME DIFFERENCE.

Set the same TIME DIFFERENCE

as the one set on your PC. If unsure,

consult your network administrator.

Use the ◄ button to return to the menu

after setting the TIME DIFFERENCE.

DATE AND TIME

Entering DATE AND TIME :

Use the

▲/▼/◄/► buttons to enter the Year (last two digits),

Month, Date, Hour and Minute.

•

The projector will override this setting and retrieve DATE AND TIME

information from the Timeserver when SNTP is enabled. See

[Date/

Time Settings] in [User’s Manual - Network Functions:Conguring

and Controlling the Projector via a Web Browser] for SNTP set-

tings.

e-SHOT

e-SHOT display :

Use the ▲/▼ buttons to select an item and the ► or ENTER but-

tons to display the image.

Image1

Image2

Image3

Image4

File names of registered images are

displayed by 16 characters or less.

Example: DEMONSTRATION-01

“NEW” stamp is added to the head

of line when the image is registered

newly. After the image is displayed,

“NEW” stamp will be erased.

Once an image is displayed, you can

use the ▲/▼ buttons to page through

the images. Use the ◄ or ESC buttons

to return to the menu.

Pressing the RESET button or the ► button for about 3 seconds

while an image is being displayed will display the RESET menu.

The displayed image can be deleted from the RESET menu using

the ENTER button on the remote control or the INPUT button on the

projector.

If you do not wish to delete the image use the ESC button on the remote

control or push the

◄

and INPUT buttons on the projector at the same time.

•

Items with no image stored cannot be selected.

•

Images can be changed using the

▲/▼

buttons while the image data down-

loads.

NETWORK Menu (continued)

G5*16

0GY+/#)'24'5'06#6+10(+.'

+/#)'&'/10564#6+10

+/#)'&'/10564#6+10

+/#)'6#$.'

G5*16

4'5'6+/#)'

01;'5

'5% '06'4

6+/'&+(('4'0%'

㪞㪤㪫㩷㩷㪇㪇㩷㪑㩷㪇㪇㩷

IMAGE‑1

(continued on next page)

54ViewSonic PJ1158

Item Description

INFORMATION

INFORMATION display :

Use the ► or ENTER buttons to view net-

work information and conrm settings.

• Only the rst 16 characters of the projector name are displayed.

• The battery for the built in clock may be dead if the clock loses

time even when the DATE AND TIME have been set correctly.

Replace the battery by following the instructions on replacing the

battery.

SERVICE

Choose the RESTART using the ► button.

Then use the ▲ button to execute.

Network will be once cut off when choose restart.

If DHCP is selected on, IP address may be changed.

After selecting RESTART, Network menu may not be controlled ap-

prox. 20 seconds.

NETWORK Menu / Network functions

NETWORK Menu (continued)

+2#&&4'55

57$0'6/#5-

0'6914-+0(14/#6+10

&'(#7.6)#6'9#;

/#%#&&4'55

0#/'

 #%%

6+/'&+(('4'0%')/6

&#6'#0&6+/' 



5'48+%'

4'56#46

':'%76'

%#0%'.

55ViewSonic PJ1158

Network Functions

Conguring and Controlling the Projector via a Web Browser

You can change the settings of or control the projector via a network by using a

web browser from a PC that is connected to the same network.

Failure & Warning Alerts via E-mail

The projector can automatically send an alert to specied e-mail addresses when

the projector requires maintenance or has encountered an error.

Projector Management via SNMP

This projector is SNMP (Simple Network Management Protocol) compliant, allow-

ing you to monitor it from a remote location using SNMP software. In addition, the

projector is able to send failure & warning alerts to a specied PC.

Controlling the Projector via Scheduling

You can schedule the projector to perform various functions according to the

DATE and TIME.

Still Image Transfer

The projector can display still images that are transferred via the network.

Projector Control via RS-232C via the Network

The projector can be controlled using RS-232C commands over a network.

This projector is equipped with the following network functions.

56ViewSonic PJ1158

Network Functions

Before using the network functions…

To use the network functions of this projector, the projector must be congured to

suit your network. Consult with your network administrator before connecting the

projector to your network. Incorrect network conguration of this projector may

cause problems on your network.

Connect to the Gateway (The router/PC that forwards trafc to a destination

outside of the subnet of the transmitting device) from the network terminal on the

projector using a CAT-5 cable and congure the following settings.

If using a network with DHCP enabled:

The projector’s network settings can be congured automatically. when [DHCP]

on the network menu is set to [TURN ON]. Please refer to DHCP in network

menu. If a xed / static IP address is required, please congure your projector ac-

cording to the steps in the following section.

If using a network system that does not have DHCP enabled or if

using a xed IP address on a network system equipped with DHCP

enabled:

Congure the following settings on the network menu.

[DHCP]: Disable DHCP (Set [DHCP] to [TURN OFF]).

[IP ADDRESS]: Enter an appropriate IP address for the projector to connect

to your network.

[SUBNET MASK]: Enter an appropriate SUBNETMASK for the projector to

connect to your network.

[DEFAULT GATEWAY]: Enter an appropriate Gateway (the router/PC that

forwards trafc to a destination outside of the subnet of the transmitting de-

vice) address for the projector to connect to your network.

57ViewSonic PJ1158

Network Functions

Conguring and controlling the projector via a web browser

You can adjust or control the projector via a network from a web browser on a PC

that is connected to the same network.

• Internet Explorer 5.5 or higher or Netscape 6.2 or higher are required.

• If JavaScript is disabled in your web browser conguration, you must enable

JavaScript in order to use the projector web pages properly. See the Help les

for your web browser for details on how to enable JavaScript.

• This projector is SSL (Secure Socket Layer) compliant. Please specify “https://”

when the entering the projector address.

• If no operations are performed via a web browser for approx. 50 seconds the

system will automatically log off. Please Re-log on to continue operations via a

web browser.

• After you logon, a small, blank window will appear behind the main operation

window. Please do not close this small, blank window. If this window is closed,

the system will automatically log off after certain period of time even if an op-

eration is being performed.

The small, blank window will close when the main operation window is closed.

• The small, blank window may be considered a pop-up and be blocked if you

are using Windows XP Service Pack 2, or using other security software.

If Service Pack 2 blocks the window the following message will appear:

"Pop-up blocked. To see this pop-up or additional options click here..."

Please select "Temporarily Allow Pop-ups" or "Always Allow Pop-ups From This

Site..." to allow the window to open.

• It is recommended that all web browser updates be installed. It is especially

recommended that all users running Internet Explorer on a Microsoft Windows

version prior to Windows XP Service Pack 2 install security update Q832894

(MS04-004) or the web browser interface may not be displayed correctly.

And when using an older version of Internet Explorer, during operations the

browser will log out after 50 seconds.

NOTE

58ViewSonic PJ1158

Network Functions

When conguring or controlling the projector via a web browser, an ID and pass-

word are required. There are two types of IDs, Administrator IDs and User IDs.

The following chart describes the differences between user and administrator IDs.

Below are the factory default settings for administrator IDs, user IDs and pass

words.

Item Description

Administrator ID

User ID

Network Information

Displays the projector’s current net

work conguration settings.

√ √

Network Settings

Displays and congures network set-

tings.

√ N/A

Port Settings

Displays and congures communica-

tion port settings.

√ N/A

Mail Settings

Displays and congures e-mail ad-

dressing settings.

√ N/A

Alert Settings

Displays and congures failure &

warning alerts.

√ N/A

Schedule Settings

Displays and congures schedule

settings.

√ N/A

Date/Time Settings

Displays and congures the date and

time settings.

√ N/A

Security Settings

Displays and congures passwords

and other security settings.

√ N/A

Projector Control Controls the projector. √ √

Projector Status

Displays and congures the current

projector status.

√ √

Network Restart

Restarts the projector’s network con

nection.

√ N/A

Item ID Password

Administrator ID Administrator <blank>

User ID User <blank>

Conguring and controlling the projector via a web browser (Continued)

59ViewSonic PJ1158

Settings

Refer to the following for conguring or controlling the projector via a web brows-

er.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter

[https://192.168.1.10] into the ad-

dress bar of the web browser and the

screen in Fig. 1 will be displayed.

2) Enter your ID and password and click

[Logon].

If the logon is successful either the Fig.2 or Fig.3 screen will be displayed.

3) Click the desired operation or conguration item on the main menu located on

the left-hand side of the screen (Fig. 2 or Fig. 3).

Fig. 2 (Logon with administrator ID) Fig. 3 (Logon with user ID)

Fig. 1

60ViewSonic PJ1158

Settings

Network Information

All screen images displayed in this manual are

screens of a logon using an administrator ID.

Any administrator only functions will not be dis-

played when using a user ID. Refer to the de-

scriptions in each table.

Displays the projector’s current network conguration settings.

Item Description

DHCP Displays the DHCP conguration settings.

IP Address Displays the current IP address.

Subnet Mask Displays the Subnet Mask.

Default Gateway Displays the Default Gateway.

MAC Address Displays the MAC address.

Firmware Date

Displays the network rmware time stamp. This information is only

displayed when logged on using an administrator ID.

Firmware Version

Displays the network rmware version number. This information is

only displayed when logged on using an administrator ID.

61ViewSonic PJ1158

Settings

Network Settings

Displays and congures network settings.

Click the

[Apply] button to save the settings.

• The new conguration settings are activated after restarting the net-

work connection. When the conguration settings are changed, you must re-

start the network connection. You can restart the network connection by clicking

[Network Restart] on the main menu.

• If you connect the projector to an existing network, consult a network adminis-

trator before setting server addresses.

NOTE

Item Description

IPConguration

Congures network settings.

DHCP ON Enables DHCP.

DHCP OFF Disables DHCP.

IP Address Congures the IP address when DHCP is disabled.

Subnet Mask Congures the Subnet Mask when DHCP is disabled.

Default Gateway Congures the Default Gateway when DHCP is disabled.

Projector Name Congures the Projector name.

SysLocation Congures the location to be referred to when using SNMP.

SysContact

Congures the contact information to be referred to when us-

ing SNMP.

62ViewSonic PJ1158

Settings

Port Settings

Displays and congures communication port settings.

Click the

[Apply] button to save the settings.

• The new conguration settings are activated after restarting the net-

work connection. The network connection must be restarted when the congu-

ration settings are changed. The network connection can be restarted using

[Network Restart] on the main menu.dresses.

NOTE

Item Description

Network Control Port1

(Port:23)

Congures command control port 1 (Port:23).

Port open Click the [Enable] check box to use port 23.

Authentication

Click the

[Enable] check box when authentication is required

for this port.

Network Control Port2

(Port:9715)

Congures command control port 2 (Port:9715).

Port open Click the [Enable] check box to use port 9715.

Authentication

Click the

[Enable] check box when authentication is required

for this port.

Image Transfer Port

(Port:9716)

Congures the image transfer port (Port:9716).

Port open Click the [Enable] check box to use port 9716.

Authentication

Click the

[Enable] check box when authentication is required

for this port.

SNMP Port Congures the SNMP port.

Port open Click the [Enable] check box to use SNMP.

Trap address Congures the destination of the SNMP Trap in IP format.

SMTP Port Congures the SMTP port.

Port open Click the [Enable] check box to use the e-mail function.

63ViewSonic PJ1158

Settings

Mail Settings

Displays and congures e-mail addressing settings.

Click the

[Apply] button to save the settings.

• You can conrm whether the mail settings work correctly using the

[Send Test Mail] button.

• If you connect the projector to an existing network, consult a network adminis-

trator before setting server addresses.

NOTE

Item Description

Send Mail

Click the

[Enable] check box to use the e-mail function.

Congure the conditions for sending email under [Alert Set-

tings].

SMTP Server IP Address Congures the address of the mail server in IP format.

Sender E-mail address

Congures the sender e-mail address.

The length of the sender e-mail address can be up to 255

alphanumeric characters.

Recipient E-mail address

Congures the e-mail address of up to ve recipients. You

can also specify

[TO] or [CC] for each address. The length of

the recipient e-mail address can be up to 255 alphanumeric

characters.

64ViewSonic PJ1158

Settings

Alert Settings

Displays and congures failure & warning alerts.

Item Description

Cover Error Congures Cover Error alert settings.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for

this item.

Send Mail

Click the

[Enable] check box to enable e-mail alerts for this

item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric

characters.

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric char

acters.

Fan Error Congures Fan Error alert settings.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for

this item.

Send Mail

Click the

[Enable] check box to enable e-mail alerts for this

item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric

characters.

Mail Text

Congures the text of the e- mail to be sent.

The length of the text can be up to 1024 alphanumeric char

acters.

65ViewSonic PJ1158

Settings

Alert Settings (Continued)

Item Description

Lamp Error Congures Lamp Error alert settings.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for

this item.

Send Mail

Click the

[Enable] check box to enable e-mail alerts for this

item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric

characters.

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric char

acters.

Temp Error Congures Temp Error alert settings.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for

this item.

Send Mail

Click the

[Enable] check box to enable e-mail alerts for this

item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric

characters.

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric char

acters.

Air Flow Error Congures Air Flow Error alert settings.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for

this item.

Send Mail

Click the

[Enable] check box to enable e-mail alerts for this

item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric

characters.

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric char

acters.

66ViewSonic PJ1158

Settings

Alert Settings (Continued)

Item Description

Lamp Time Error Congures Lamp Time Error alert settings.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for

this item.

Send Mail

Click the

[Enable] check box to enable e-mail alerts for this

item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric

characters.

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric char

acters.

Cool Error Congures Cool Error alert settings.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for

this item.

Send Mail

Click the

[Enable] check box to enable e-mail alerts for this

item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric

characters.

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric char

acters.

Filter Error Congures Filter Error alert settings.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for

this item.

Send Mail

Click the

[Enable] check box to enable e-mail alerts for this

item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric

characters.

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric char

acters.

67ViewSonic PJ1158

Settings

Alert Settings (Continued)

Item Description

Other Error Congures Other Error alert settings.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for

this item.

Send Mail

Click the

[Enable] check box to enable e-mail alerts for this

item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric

characters.

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric char

acters.

Schedule Execution Error

Congures Schedule Execution Error alert settings.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for

this item.

Send Mail

Click the

[Enable] check box to enable e-mail alerts for this

item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric

characters.

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric char

acters.

Lamp Time Alarm Congures Lamp Time Alarm alert settings.

Alarm Time Congures the lamp time to alert.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for

this item.

Send Mail

Click the

[Enable] check box to enable e-mail alerts for this

item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric

characters.

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric char

acters.

68ViewSonic PJ1158

Settings

Alert Settings (Continued)

Item Description

Filter Time Alarm Congures Filter Time Alarm alert settings.

Alarm Time Congures the lter time to alert.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for this

item.

Send Mail Click the [Enable] check box to enable e-mail alerts for this item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric charac

ters.

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric characters.

“CHANGE THE

LAMP”isdis

played

Congures alert settings for when “CHANGE THE LAMP” is dis-

played.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for this

item.

Send Mail Click the [Enable] check box to enable e-mail alerts for this item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric charac

ters.

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric characters.

Cold Start Congures Cold Start alert settings.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for this

item.

Authentication

Failure

Congures Authentication Failure alert settings.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for this

item.

Click the [Apply] button to save the settings.

Transition Detec-

tor Alarm

Congures Transition Detector Alarm alert settings.

SNMP Trap

Click the

[Enable] check box to enable SNMP Trap alerts for this

item.

Send Mail Click the [Enable] check box to enable e-mail alerts for this item.

Mail Subject

Congures the subject line of the e-mail to be sent.

The length of the subject line can be up to 255 alphanumeric charac

ters.

Mail Text

Congures the text of the e-mail to be sent.

The length of the text can be up to 1024 alphanumeric characters.

69ViewSonic PJ1158

Settings

Schedule Settings

Displays and congures schedule settings.

Item Description

Daily Congures the daily schedule.

Schedule Click the [Enable] check box to enable daily scheduling.

Schedule List Displays the current daily schedule.

Sunday Congures the Sunday schedule.

Schedule Click the [Enable] check box to enable Sunday scheduling.

Schedule List Displays the current Sunday schedule.

Monday Congures the Monday schedule.

Schedule Click the [Enable] check box to enable Monday scheduling.

Schedule List Displays the current Monday schedule.

Tuesday Congures the Tuesday schedule.

Schedule Click the [Enable] check box to enable Tuesday scheduling.

Schedule List Displays the current Tuesday schedule.

Wednesday Congures the Wednesday schedule.

Schedule

Click the [Enable] check box to enable Wednesday schedul-

ing.

Schedule List Displays the current Wednesday schedule.

Thursday Congures the Thursday schedule.

Schedule Click the [Enable] check box to enable Thursday scheduling.

Schedule List Displays the current Thursday schedule.

Friday Congures the Friday schedule.

Schedule Click the [Enable] check box to enable Friday scheduling.

Schedule List Displays the current Friday schedule.

Saturday Congures the Saturday schedule.

Schedule Click the [Enable] check box to enable Saturday scheduling.

Schedule List Displays the current Saturday schedule.

70ViewSonic PJ1158

Settings

Schedule Setting (Continued)

Item Description

SpecicdateNo1

Congures the specic date (No.1) schedule.

Schedule

Click the

[Enable] check box to enable specic date (No.1)

scheduling.

Month/Day Congures the Month and date.

Schedule List Displays the current specic date (No.1) schedule.

SpecicdateNo.2 Congures the specic date (No.2) schedule.

Click the [Apply] button to save the settings.

Schedule

Click the

[Enable] check box to enable specic date (No.2)

scheduling.

Month/Day Congures the Month and date.

Schedule List Displays the current specic date (No.2) schedule.

SpecicdateNo.3 Congures the specic date (No.3) schedule.

Schedule

Click the

[Enable] check box to enable specic date (No.3)

scheduling.

Month/Day Congures the Month and date.

Schedule List Displays the current specic date (No.3) schedule.

SpecicdateNo.4 Congures the specic date (No.4) schedule.

Schedule

Click the

[Enable] check box to enable specic date (No.4)

scheduling.

Month/Day Congures the Month and date.

Schedule List Displays the current specic date (No.4) schedule.

SpecicdateNo.5 Congures the specic date (No.5) schedule.

Schedule

Click the

[Enable] check box to enable specic date (No.5)

scheduling.

Month/Day Set the Month and date.

Schedule List Displays the current specic date (No.5) schedule.

71ViewSonic PJ1158

Settings

To add additional functions and events click the [Add] button and set the following

items.

Item Description

Time Congures the time to execute commands.

Command Congures the commands to be executed.

Power Parameter Congures the parameters for power control.

Input Source Param-

eter

Congures the parameters for input switching.

Display Image Param-

eter

Congures the parameters for display of transfer image data.

Click the [Register] button to add new commands to the Schedule List.

Click the

[Delete] button to delete commands from the Schedule list.

Date/Time Settings

Displays and congures the date and time settings.

Item Description

Current Date Congures the current date in Year/Month/Day format.

Current Time Congures the current time in Hour:Minute:Second format.

Schedule Setting (Continued)

72ViewSonic PJ1158

Settings

Date/Time Settings (Continued)

Click the

[Apply] button to save the settings.

Item Description

Daylight Savings Time

Click the

[ON] check box to enable daylight savings time and

set the following items.

SNTP Server IP Address

Congures the SNTP server address in IP format.

Cycle

Congures the interval at which to retrieve Date and Time

information from the SNTP server. (hours:minutes).

Start Congures the date and time daylight savings time begins.

Month Congures the month daylight savings time begins (1~12).

Week

Congures the week of the month daylight savings time be-

gins (First, 2, 3, 4, Last).

Day

Congures the day of the week daylight savings time begins

(Sun, Mon, Tue, Wed, Thu, Fri, Sat).

Hour Congures the hour daylight savings time begins (0 ~ 23).

Minute Congures the minute daylight savings time begins (0 ~ 59).

End Congures the date and time daylight savings time ends.

Month Congures the month daylight savings time ends (1 ~ 12).

Week

Congures the week of the month daylight savings time ends

(First, 2, 3, 4, Last).

Day

Congures the day of the week daylight savings time ends

(Sun, Mon, Tue, Wed, Thu, Fri, Sat).

Hour Congures the hour daylight savings time ends (0 ~ 23).

Minute Congures the minute daylight savings time ends (0 ~ 59).

Time difference

Congures the time difference (hours:minutes).

Set the same time difference as the one set on your PC. If

unsure, consult your network administrator.

SNTP

Click the

[ON] check box to retrieve Date and Time informa-

tion from the SNTP server and set the following items.

•

The new conguration settings are activated after restarting the network connection.

The network connection must be restarted when the conguration settings are changed, The

network connection can be restarted using [Network Restart] on the main menu.

• If you connect the projector to an existing network, consult a network adminis-

trator before setting server addresses.

• To enable the SNTP function, the time difference must be set.

• The projector will retrieve DATE and TIME information from the Timeserver

and override time settings when SNTP is enabled.

• The Internal Clock’s time may not remain accurate. Using SNTP is recom-

mended to maintain accurate time.

NOTE

73ViewSonic PJ1158

Settings

Security Settings

Item Description

Administrator authority Congures the Administrator ID and Password.

Administrator ID

Congures the Administrator ID.

The length of the text can be up to 32 alphanumeric charac

ters.

Administrator Pass-

word

Congures the Administrator Password.

The length of the text can be up to 255 alphanumeric charac

ters.

Re-enter Administrator

Password

Re-enter the above password for verication.

Displays and congures passwords and other security settings.

User authority Congures the User ID and Password.

User ID

Congures the User ID.

The length of the text can be up to 32 alphanumeric charac

ters.

User Password

Congures the User Password.

The length of the text can be up to 255 alphanumeric charac

ters.

Re-enter User Pass-

word

Used to re-enter the above password for verication.

74ViewSonic PJ1158

Click the [Apply] button to save the settings.

Authentication Pass-

word

Congures the Authentication Password.

The length of the text can be up to 16 alphanumeric charac

ters.

Re-enter Authentica-

tion Password

Used to re-enter the above password for verication.

SNMP Congures the community name if SNMP is used.

Community Name

Congures the community name.

The length of the text can be up to 64 alphanumeric charac

ters.

• The new conguration settings are activated after restarting the net-

work connection. The network connection must be restarted when the congu-

ration settings are changed. The network connection can be restarted using

[Network Restart] on the main menu.

NOTE

Item Description

Network Control

Congures the Authentication Password for the command

control.

Settings

Security Settings (Continued)

75ViewSonic PJ1158

Projector Control

The items shown in the table below can be per-

formed using the [Projector Control] menu.

Select an item using the up and down arrow keys

on the PC.

Most of the items have a submenu.

Refer to the table below for details.

Controls the projector.

Item Description

Main

Power Turns the power On/Off.

Input Source Selects the input source.

Picture Mode Selects the Picture Mode setting.

Blank On/Off Turns Blank On/Off.

Mute Turns Mute On/Off.

Freeze Selects the Freeze setting.

Magnify Controls the Magnify setting.

Picture

Brightness Adjusts the Brightness setting.

Contrast Adjusts the Contrast setting.

Gamma Selects the Gamma setting.

Color Temp Selects the Color Temp setting.

Color Adjusts the Color setting.

Tint Adjusts the Tint setting.

Sharpness Adjusts the Sharpness setting.

Active Iris Selects the Active Iris setting.

MyMemory Recall Recalls the MyMemory data.

MyMemory Save Saves the MyMemory data.

76ViewSonic PJ1158

Projector Control

Projector Control (Continued)

Item Description

Image

Aspect Selects the Aspect setting.

Over Scan Selects the Over Scan setting.

V Position Adjusts the V Position.

H Position Adjusts the H Position.

H Phase Adjusts the H Phase.

H Size Adjusts the H Size.

Auto Adjust Performs Auto Adjustment.

Input

Progressive Selects the progressive setting.

Video NR Selects the Video NR setting.

3D-YCS Selects the 3D-YCS setting.

Color Space Selects the Color Space.

Component Selects the Component terminal setting.

C-Video Format Selects the Video Format setting.

S-Video Format Selects the S-Video Format setting.

M1-D Selects the M1-D setting.

Frame Lock Turns Frame Lock On/Off.

RGB in-1 Selects the RGB1 input signal type.

RGB in-2 Selects the RGB2 input signal type.

Setup

Aoto Keystone Execute

Performs the Automatic keystone distortion correction.

Keystone V Adjusts the Vertical Keystone setting.

Keystone H Adjusts the Horizontal Keystone setting.

Whisper Selects the Fan speed. (Normal or Whisper)

Mirror Selects the Mirror status.

77ViewSonic PJ1158

Option

Volume Adjusts the Volume setting.

Treble Adjusts the Treble setting.

Bass Adjusts the Bass setting.

SRS WOW Selects the SRS WOW setting.

Speaker Turns Speaker On/Off.

Audio-RGB1 Assigns the Audio-RGB1 input terminal.

Audio-RGB2 Assigns the Audio-RGB2 input terminal.

Audio-M1-D Assigns the Audio-M1-D input terminal.

Audio-Video Assigns the Audio-Video input terminal.

Audio-S-Video Assigns the Audio-S-Video input terminal.

Audio-Component Assigns the Audio-Component input terminal.

Auto Search Turns the Automatic signal search function On/Off.

Auto Keystone

Turns the Automatic keystone distortion correction function On/Off.

Auto on Turns the Auto on function On/Off.

Auto off

Congures the timer to shut off the projector when no signal is de-

tected.

My Button-1

Assigns the functions for the MY BUTTON1 buttons on the included

remote control.

My Button-2

Assigns the functions for the MY BUTTON2 buttons on the included

remote control.

Auto Adjust Enables/Disables Auto Adjustment.

Remote Receiv. Front Enable/Disable Remote Receiv. Front.

Remote Receiv. Rear Enable/Disable Remote Receiv. Rear.

Remote Receiv. Top Enable/Disable Remote Receiv. Top.

Remote Freq. Normal Enable/Disable Remote Freq. Normal.

Remote Freq. High Enable/Disable Remote Freq. High.

Projector Control

Projector Control (Continued)

Item Description

Audio

Language Selects the Language for the OSD.

Menu Position V Adjusts the vertical Menu Position.

Menu Position H Adjusts the horizontal Menu Position.

Blank Selects the Blank mode.

Startup Selects the Startup screen mode.

MyScreen Lock Turns MyScreen Lock On/Off.

Message Turns the Message function On/Off.

Screen

78ViewSonic PJ1158

Projector Control

Network Restart

Restarts the projector’s network connection.

Item Description

Restart

Restarts the projector’s network connection in order to acti

vate new conguration settings.

• Restarting requires you to re-log on in order to further control or con-

gure the projector via a web browser.

NOTE

Logoff

When logoff is clicked, the logon screen is displayed.

Projector Status

Displays and congures the current projector status.

Item Description

Error Status Displays the current error status

Lamp Time Displays the usage time for the current lamp.

Filter Time Displays the usage time for the current lter.

Power Status Displays the current power status.

Input Status Displays the current input signal source.

Blank On/Off Displays the Blank On/Off status.

Mute Displays the current Mute On/Off status.

Freeze Displays the current Freeze On/Off status.

79ViewSonic PJ1158

Failure & Warning Alerts via E-mail

The projector can automatically send an alert to specied e-mail addresses when

the projector requires maintenance or has encountered an error.

• Up to ve e-mail addresses can be specied.

• The projector may be not able to send e-mail if the projector suddenly loses

power.

NOTE

Mail Settings

To use the projector’s e-mail function please congure the following items via a

web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

• A Network Restart is required after the SMTP Port conguration set-

tings have changed. Click [Network Restart] and congure the following items.

NOTE

6) Click

[Mail Settings] and congure each item. Refer to the [Mail Settings]

item in [ConguringandControllingtheProjectorviaaWebBrowser] for

further information.

7) Click the [Apply] button to save the settings.

• Click the [Send Test Mail] button in [Mail Settings] to conrm that

the e-mail settings are correct. The following mail will be delivered to the speci-

ed addresses.

NOTE

Subject line : Test Mail <Projector name>

Text : Send Test Mail

Date <Testing date>

Time <Testing time>

IP Address <Projector IP address>

MAC Address <Projector MAC address>

1) Enter

[https://192.168.1.10] into the address bar of the web browser.

2) Enter the Administrator ID and Password and click [Logon].

3) Click [Port Settings] on the main menu.

4) Click the [Enable] check box to open the SMTP Port.

5) Click the [Apply] button to save the settings.

80ViewSonic PJ1158

Failure & Warning Alerts via E-mail

8) Congure the Failure/Warning Alerts via E-mail settings. Click [Alert Settings]

on the main menu.

9) Select and congure each alert item. Refer to [Alert Settings] in [Conguring

and Controlling the Projector via a Web Browser] for further information.

10) Click the [Apply] button to save the settings.

Failure/Warning e-mails are formatted as follows:

Subject line : <Mail title> <Projector name>

Text : <Mail text>

Date <Failure/Warning date>

Time <Failure/Warning time>

IP Address <Projector IP address>

MAC Address <Projector MAC address>

Mail Settings (Continued)

81ViewSonic PJ1158

Projector management via SNMP

When SNMP is enabled, the projector is able to send Failure/Warning Alerts to a

specied PC.

• It is recommended that SNMP functions be carried out by a network

administrator.

• SNMP management software must be installed on the computer to monitor

the projector via SNMP.

NOTE

SNMP settings

Congure the following items via a web browser to use SNMP.

Example: If the IP address of the projector is set to 192.168.1.10:

• A Network Restart is required after the SNMP Trap conguration set-

tings have been changed. Click [Network Restart] and congure the following

items.

NOTE

5) Click

[Security Settings] on the main menu.

6) Click [SNMP] and set the Community Name on the screen that is displayed.

• A Network Restart is required after the Community Name has been

changed.

• Click [Network Restart] and congure the following items.

NOTE

7) Congure the settings for Trap transmission of Failures/Warnings. Click

[Alert

Settings] on the main menu and select the Failure/Warning item to be cong-

ured.

8) Click the [Enable] check box to send out the SNMP trap for Failures/Warnings.

Clear the [Enable] check box when SNMP trap transmission is not required.

9) Click the [Apply] button to save the settings.

1) Enter

[https://192.168.1.10] into the address bar of the web browser.

2) Enter the Administrator ID and Password and click [Logon].

3) Click [Port Settings] on the main menu.

4) Click the [Enable] check box to open the SNMP Port.

Set the IP address to send the SNMP Trap to when a Failure/Warning occurs.

82ViewSonic PJ1158

Controlling the Projector via Scheduling

The projector can be automatically controlled via scheduling.

• You can schedule the following control events: Power ON/OFF, Input

Source and Transferred Image Display.

• There are 3 types of Scheduling, 1) daily 2) day of the week 3) specic date.

• The priority for scheduled events is as follows 1) specic date 2) day of the

week 3) daily.

• Up to ve specic dates are available for scheduled events. Priority is given to

those with the lower numbers when more than one event has been scheduled

for the same date and time (e.g., ‘Specic day No. 1’ has priority over ‘Specic

day No. 2’ and so on.

• Be sure to set the date and time before enabling scheduled events.

NOTE

83ViewSonic PJ1158

Controlling the Projector via Scheduling

Date/Time Settings

The Date/Time setting can be adjusted via a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

• A Network Restart is required after the Daylight Savings Time or

SNTP conguration settings have been changed.

• The battery for the built in clock may be dead if the clock loses time even

when the DATE and TIME have been set correctly. Replace the battery by fol-

lowing the instructions on replacing the battery.

• The Internal Clock’s time may not remain accurate. Using SNTP is recom-

mended to maintain accurate time.

NOTE

1) Enter [https://192.168.1.10] into the address bar of the web browser.

Enter the Administrator ID and Password and click [Logon].

2) Click [Date/Time Settings] on the main menu and congure each item. Refer

to the [Date/Time Settings] item in [ConguringandControllingthePro-

jector via a Web Browser] for further information.

3) Click the [Apply] button to save the settings.

84ViewSonic PJ1158

Controlling the Projector via Scheduling

Schedule Settings

Schedule settings can be congured from a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

There are three types of scheduling.

1) Daily: Perform the specied operation at a specied time every day.

2) Sunday ~ Saturday: Perform the specied operation at the specied time on a

specied day of the week.

3) Specic Date: Perform the specied operation on the specied date and time.

• In Standby mode the power indicator will ash green for approx. 3

seconds when at least 1 “Power ON” schedule is saved.

• When the schedule function is used, the power cord must be connected to

the projector and the outlet and the power switch must be turned on, [ | ]. The

schedule function does not work when the power switch is turned off, [

] or

the breaker in a room is tripped. The power indicator will lights orange or green

when the projector gets is receiving the power.

NOTE

1) Enter

[https://192.168.1.10] into the address bar of the web browser.

2) Enter the Administrator ID and Password and click [Logon].

3) Click [Schedule Settings] on the main menu and select the required schedule

item.

4) Click the [Enable] check box to enable scheduling.

5) Enter the Date (Month/Day) for specic date scheduling.

6) Click [Add] and set the hour, command and parameters and click [Add This

Schedule] when you want to add a command.

7) Click the [Delete] button when you want to delete a schedule.

8) Click the [Apply] button to save the settings.

85ViewSonic PJ1158

e-SHOT (Still Image Transfer) Display

The projector can display a still image that is transferred via the network.

Communication Port

The following port is used for e-SHOT.

TCP #9716

e-SHOT (Still Image Transfer) Settings

Congure the following items from a web browser when e-SHOT is used.

Example: If the IP address of the projector is set to 192.168.1.10:

• e-SHOT is not available via communication ports which are used for

the command control (TCP #23 and TCP #9715).

NOTE

1) Enter

[https://192.168.1.10] into the address bar of the web browser.

2) Enter the Administrator ID and Password and

click [Logon].

3) Click [Port settings] on the main menu.

4) Click the [Enable] check box to open the [Im-

age Transfer Port (Port: 9716)]. Click the

[Enable] check box for the [Authentication]

setting when authentication is required, other-

wise clear the check box.

5) Click the [Apply] button to save the settings.

86ViewSonic PJ1158

e-SHOT(Still Image Transfer) Display

e-SHOT (Still Image Transfer) Settings (Continued)

When the authentication setting is enabled, the following settings are required.

6) Click

[Security Settings] on the main menu.

7) Select [Network Control] and enter the desired authentication password. *

see Note1

8) Click the [Apply] button to save the settings. * see Note2

• The Authentication Password will be the same for [Network Control

Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and [Image Transfer

Port (Port: 9716)].

NOTE1

• The new conguration settings are activated after restarting the

network. Restart the network connection when any conguration settings are

changed. The network connection can be restarted using [Network Restart] on

the main menu.

NOTE2

e-SHOT (Still Image Transfer) Transmission

e-SHOT transmission requires an exclusive application for your PC. You can

download it from the ViewSonic web site. Refer to the manual for the application

for instructions.

87ViewSonic PJ1158

Command Control via the Network

You can congure and control the projector via the network using RS-232C com-

mands.

Communication Port

The following two ports are assigned for the command control.

TCP #23

TCP #9715

Command Control Settings

Congure the following items from a web browser when command control is used.

Example: If the IP address of the projector is set to 192.168.1.10:

• Command control is not available via communication port (TCP

#9716) that is used for the e-SHOT transmission function.

NOTE

1) Enter

[https://192.168.1.10] into the address bar of the web browser.

2) Enter the Administrator ID and Password and click [Logon].

3) Click [Port settings] on the main menu.

4) Click the [Enable] check box to open [Network Control Port (Port: 23)] to use

TCP #23. Click the [Enable] check box for the [Authentication] setting when

authentication is required, otherwise clear the check box.

5) Click the [Enable] check box to open [Network Control Port (Port: 9715)] to

use TCP #9715. Click the [Enable] check box for the [Authentication] setting

when authentication is required, otherwise clear the check box.

6) Click the [Apply] button to save the settings.

88ViewSonic PJ1158

Command Control via the Network

Command Control Settings (Continued)

When the authentication setting is enabled, the following settings are required.

7) Click

[Security Settings] on the main menu.

8) Click [Network Control] and enter the desired authentication password. * See

Note1.

9) Click the [Apply] button to save the settings. * See Note2.

• The Authentication Password will be the same for [Network Control

Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and [Image Transfer

Port (Port: 9716)].

NOTE1

• The new conguration settings are activated after restarting the

network. Restart the network when any conguration settings are changed.

The network connection can be restarted using [Network Restart] on the main

menu.

NOTE2

89ViewSonic PJ1158

Command Control via the Network

Command format

Command formats differ among the different communication ports.

TCP #23

You can use the RS-232C commands without any changes. The reply data format

is the same as the RS-232C commands. However, the following reply will be sent

back in the event of authentication failure when authentication is enabled.

Reply Error code

0x1F 0x04 0x00

TCP #9715

Send Data format

The following formatting is added to the header (0x02), Data length (0x0D),

Checksum (1byte) and Connection ID (1 byte) of the RS-232C commands.

Header

Data

length

RS-232Ccommand

Checksum

Connection

0x02 0x0D 13 bytes 1 byte 1 byte

Header → 0x02, Fixed

Data length → RS-232C commands byte length (0x0D, Fixed)

RS-232C commands → RS-232C commands that start with 0xBE 0xEF (13 bytes)

Check Sum → This is the value to make zero on the addition of the lower

8 bits from the header to the checksum.

Connection ID → Random value from 0 to 255 (This value is attached to

the reply data)

90ViewSonic PJ1158

Command Control via the Network

Reply Data format

The connection ID (the data is same as the connection ID data on the sending

data format) is attached to the RS-232C commands reply data.

Connection

0x06 1 byte

Connection

0x15 1 byte

Reply Error code

Connection

0x1C 2 bytes 1 byte

Reply Data

Connection

0x1D 2 bytes 1 byte

Reply Status code

Connection

0x1F 2 bytes 1 byte

Authentication Er-

ror code

Connection

0x1F 0x04 0x00 1 byte

91ViewSonic PJ1158

Command Control via the Network

Automatic Connection Break

The TCP connection will be automatically disconnected after there is no communi-

cation for 30 seconds after being established.

Authentication

The projector does not accept commands without authentication success when

authentication is enabled. The projector uses a challenge response type authenti

cation with an MD5 (Message Digest 5) algorithm.

When the projector is using a LAN, a random eight bytes will be returned if au-

thentication is enabled. Bind this received 8 bytes and the authentication pass-

word and digest this data with the MD5 algorithm and add this in front of the com-

mands to send.

Following is a sample if the authentication password is set to “password” and the

random eight bytes are “a572f60c”.

1) Select the projector.

2) Receive the random eight bytes “a572f60c” from the projector.

3) Bind the random eight bytes “a572f60c” and the authentication password

“password” and it becomes “a572f60cpassword”.

4) Digest this bind “a572f60cpassword” with MD5 algorithm.

It will be “e3d97429adffa11bce1f7275813d4bde”.

5) Add this “e3d97429adffa11bce1f7275813d4bde” in front of the commands and

send the data.

Send “e3d97429adffa11bce1f7275813d4bde”+command.

6) When the sending data is correct, the command will be performed and the

reply data will be returned. Otherwise, an authentication error will be returned.

92ViewSonic PJ1158

Maintenance

Lamp

A lamp has nite product life. Using the lamp for long periods of time could cause

the pictures darker or the color tone poor. Note that each lamp has a different

lifetime, and some may burst or burn out soon after you start using them.

Preparation of a new lamp and early replacement are recommended. To prepare

a new lamp, contact your dealer and tell the lamp type number.

Type number = RLC-021

Replacing the lamp

Turn the projector off, and unplug the power cord.

Allow the projector to cool for at least 45 minutes.

Prepare a new lamp.

If the projector is mounted on a ceiling, or if the lamp

has broken, also ask the dealer to replace the lamp.

In case of replacement by yourself,

Loosen the screw (marked by arrow) of the lamp cover

and then slide the lamp cover to the side to remove it.

Loosen the 3 screws (marked by arrow) of the

lamp, and slowly pick up the lamp by the handles.

Insert the new lamp, and retighten rmly the 3

screws of the lamp that are loosened in the previ

ous process to lock it in place.

Slide the lamp cover back in place and rmly fas-

ten the screw of the lamp cover.

Turn the projector on and reset the lamp time us-

ing the LAMP TIME item in the OPTION menu.

(1) Press the MENU button to display a menu.

(2) Point at the “Go to Advanced Menu …” in the menu

using the ▼/▲ button, then press the ► button.

(3) Point at the “OPTION” in the left column of the

menu using the ▼/▲button, then press the ► but-

ton.

(4) Point at the “LAMP TIME” using the ▼/▲ button, then press the ► button. A

dialog will appear.

(5) Press the ▲ button to select “RESET” on the dialog. It performs resetting the

lamp time.

Maintenance

NOTE • Please reset the lamp time only when you have replaced the lamp,

for a suitable indication about the lamp.

The lamp cover

The handles

93ViewSonic PJ1158

Maintenance

Lamp (continued)

WARNING

HIGH VOLTAGE

HIGH TEMPERATURE

HIGH PRESSURE

►The projector uses a high-pressure mercury glass lamp. The lamp can break

with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn

over time. Note that each lamp has a different lifetime, and some may burst or

burn out soon after you start using them. In addition, when the bulb bursts, it is

possible for shards of glass to y into the lamp housing, and for gas containing

mercury to escape from the projector’s vent holes.

►About disposal of a lamp • This product contains a mercury lamp; do not

put it in a trash. Dispose of it in accordance with environmental laws.

For lamp recycling, go to www.lamprecycle.org. (in the US)

For product disposal, contact your local government agency or www.eiae.org (in

the US) or www.epsc.ca (in Canada).

For more information, call your dealer.

• If the lamp should break (it will make a loud bang when it does),

unplug the power cord from the outlet, and make sure to request a

replacement lamp from your local dealer. Note that shards of glass

could damage the inside of the projector, or cause injury during

handling, so please do not try to clean the projector or replace the lamp

yourself.

• If the lamp should break (it will make a loud bang when it does),

ventilate the room well, and make sure not to breathe the gas that

comes out of the projector vents, or get it in your eyes or mouth.

• Before replacing the lamp, turn the projector off and unplug the power

cord, then wait at least 45 minutes for the lamp to cool sufficiently.

Handling the lamp while hot can cause burns, as well as damaging the

lamp.

• Never unscrew except the appointed (marked by an arrow) screws.

• Do not open the lamp cover while the projector is suspended from

the ceiling. This is dangerous, since if the lamp’s bulb has broken, the

shards will fall out when the cover is opened. In addition, working in

high places is dangerous, so ask your local dealer to have the lamp

replaced even if the bulb is not broken.

• Do not use the projector with the lamp cover removed. To replace the

lamp, make sure that the screws are tightened firmly. Loose screws

could result in damage or injury.

• Use only the lamp of the specied type.

• If the lamp breaks soon after the first time it is used, it is possible

that there are electrical problems elsewhere besides the lamp. If this

happens, contact your local dealer or a service representative.

•

Handle with care: jolting or scratching could cause the lamp bulb to burst during use.

• Using the lamp for long periods of time, could cause it dark, not to

light up or to burst. When the pictures appear dark, or when the color

tone is poor, please replace the lamp as soon as possible. Do not use

old (used) lamps; this is a cause of breakage.

Disconnect

the plug

from the

power

outlet

94ViewSonic PJ1158

Please check and clean the air lter periodically. If the air lter becomes clogged

by dust or the like, internal temperatures rise, which could cause a re, a burn or

malfunction to the projector. When the indicators or a message prompts you to

clean the air lter, comply with it as soon as possible. Note that the projector may

shut down, when the projector heats too much.

Please replace the air lter when it is damaged or too soiled. Preparation of a new

air lter is recommended. To prepare a new air lter, contact with your dealer and

tell the air lter type number.

Cleaning the air lter

Turn the projector off, and unplug the

power cord. Allow the projector to suf-

ciently cool down.

Use a vacuum cleaner on and around the

lter cover.

Hold the lter cover knobs while lifting it.

The lter unit made up the lter cover and

others will come off.

Use a vacuum cleaner for the lter vent of

the projector and the lter frame side of

the lter unit.

If the air lter is damaged or too soiled, re-

place it according to the following procedure

number 5 to 7. Otherwise, please jump to

the procedure number 8.

To remove the lter frame, hold the lter

cover while holding and pulling the lter

frame’s knob by another hand.

Replace the air lter with new one. It is

recommended that the uted surface of

the air lter faces the lter cover.

Put the lter frame back.

Put the lter unit back into the projector.

Maintenance

Air lter

The front side of the projector

The lter cover

The lter cover knobs

The lter unit

The lter frame knob

(continued on next page)

The air lter

The lter frame

The lter cover

The uted

surface of

the air lter

95ViewSonic PJ1158

WARNING ►Before taking care of the air lter, make sure the power switch

is off and the power cable is not plugged in, then allow the projector to cool suf

ciently. Taking care of the air lter in a high temperature state of the projector

could cause an electric shock, a burn or malfunction to the projector.

►Use only the air lter of the specied type. Do not use the projector without

the air lter or the lter cover. It could result in a re or malfunction to the pro-

jector.

►Clean the air lter periodically. If the air lter becomes clogged by dust or the

like, internal temperatures rise and could cause a re, a burn or malfunction to

the projector.

NOTE • Please replace the air lter when it is damaged or too soiled, and

also when you replace the lamp.

• When you replace the projection lamp, please replace the air lter. An air lter

of specied type will come together with a replacement lamp for this projector.

• Please reset the lter time only when you have cleaned or replaced the air

lter, for a suitable indication about the air lter.

• The projector may display the message such as “CHECK THE AIR FLOW” or

turn off the projector, to prevent the internal heat level rising.

Maintenance

Turn the projector on and reset the lter time using the FILTER TIME item in

the EASY MENU.

(1) Press the MENU button to display a menu.

(2) Point at the “FILTER TIME” using the ▼/▲ button, then press the ► button. A

dialog will appear.

(3) Press the ▲ button to select “RESET” on the dialog. It performs resetting the

lter time.

Air lter (continued)

96ViewSonic PJ1158

Maintenance

Turn the projector off, and unplug the power cord. Allow the pro-

jector to cool sufciently.

After making sure that the projector has cooled adequately,

slowly turn over the projector, so that the bottom is facing.

Remove the battery cover.

Turn the battery cover in the direction indicated “OPEN” using

such as coins. Then the battery cover will come up. While remov

ing the battery cover, pick its knob.

Take the old battery out.

Press the metal claw of the battery holder. Then the battery

will come up. Remove the battery.

Put a new battery in.

Replace battery with HITACHI MAXELL, Part No.CR2032

only.Useofanotherbatterymaypresentariskofreor

explosion.

Insert a new battery in the battery holder according to its minus terminal

as indicated in the battery holder, so that the side marked by

is fac-

ing. And push the battery into the battery holder fully to x.

Close the battery cover.

Replace the battery cover in place, then turn it in the direc-

tion indicated “CLOSE” using such as coins, to x.

Battery Cover

OPEN

Knob

Metal claw

“+” marking

WARNING ►

Always handle the batteries with care and use them only as directed. Battery

may explode if mistreated. Do not recharge, disassemble or dispose of in re.

And also improper use may result in cracking or leakage, which could result in re, injury and/or

pollution of the surrounding environment.

•

Be sure to use only the batteries specied. Do not use batteries of different types at the same

time. Do not mix a new battery with used one.

•

Make sure the plus and minus terminals are correctly aligned when loading a battery.

If the battery is placed in the battery holder upside-down, it may be hard to remove.

•

Keep a battery away from children and pets. If swallowed consult a physician immediately for emergency treatment.

•

Do not short circuit or solder a battery.

•

Do not allow a battery in a re or water. Keep batteries in a dark, cool and dry place.

•

If you observe a leakage of a battery, wipe out the ower and then replace a battery. If the liquid

adheres to your body or clothes, rinse well with water immediately.

•

Obey the local laws on disposing the battery.

Internal clock battery

Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has

stopped, please replace the battery according to the following procedures.

NOTE •

If the battery is placed in the battery holder upside-down, follow the procedure below

to remove and reload it properly.

1. Remove the battery cover as described in steps 1 through 3 above.

2. Turn the projector over again, so that the top of the projector is facing up.

3. While lifting the side of the projector closest to the lens, press the metal claw of the battery

holder. The battery will fall out of the holder, so be careful not to lose it.

4. Turn the projector over once more, so that the bottom faces up, and reload the battery correctly.

•

The internal clock’s time will be reset when the battery is removed.

Please recongure the time via the menu or a web browser after replacing the battery.

(Please refer to User’s Manual-Network Functions: Date/Time Settings for more information.)

97ViewSonic PJ1158

Maintenance

Inside of the projector

In order to ensure the safe use of your projector, please have it cleaned and in

spected by your dealer about once every year.

Caring for the lens

If the lens is awed, soiled or fogged, it could cause deterioration of display qual-

ity. Please take care of the lens, being cautious of handling.

Turn the projector off, and unplug the power cord. Allow the projector to cool

sufciently.

After making sure that the projector is cool adequately, lightly wipe the lens

with a commercially available lens-cleaning wipe. Do not touch the lens di-

rectly with your hand.

Caring for the cabinet and remote control

Incorrect care could have adverse inuence such as discoloration, peeling paint,

etc.

Turn the projector off, and unplug the power cord. Allow the projector to cool

sufciently.

After making sure that the projector is cool adequately, lightly wipe with gauze

or a soft cloth.

If the projector is extremely dirty, dip soft cloth in water or a neutral cleaner di

luted in water, and wipe lightly after wringing well. Then, wipe lightly with a soft,

dry cloth.

Other care

WARNING ►Before caring, make sure the power switch is off and the

power cable is not plugged in, and then allow the projector to cool sufciently.

The care in a high temperature state of the projector could cause a burn and/or

malfunction to the projector.

►Never try to care for the inside of the projector personally. Doing is so dan-

gerous.

►Avoid wetting the projector or inserting liquids in the projector. It could result

in a re, an electric shock, and/or malfunction to the projector.

• Do not put anything containing water, cleaners or chemicals near the projec

tor.

• Do not use aerosols or sprays.

CAUTION ►Please take right care of the projector according to the follow-

ing. Incorrect care could cause not only an injury but adverse inuence such as

discoloration, peeling paint, etc.

►Do not use cleaners or chemicals other than those specied in this manual.

►Do not polish or wipe with hard objects.

98ViewSonic PJ1158

Troubleshooting

Related messages

When the unit's power is on, messages such as those shown below may be dis-

played. When any such message is displayed on the screen, please follow the

instructions described below. If the same message is displayed after the remedy,

or if a message other than the following appears, please contact your dealer or

service company.

Although these messages will be automatically disappeared around several min

utes, it will be reappeared every time the power is turned on.

Message Description

NO INPUT IS DETECTED



There is no input signal.

Please conrm the signal input connection, and the status

of the signal source.

SYNC IS OUT OF RANGE



fH kHz fV Hz

The horizontal or vertical frequency of the input signal

isnotwithinthespeciedrange.

Please conrm the specs for your projector or the signal

source specs.

CHECK THE AIR FLOW

The internal temperature is rising.

Please turn the power off, and allow the projector to cool

down at least 20 minutes. After having conrmed the follow-

ing items, please turn the power ON again.

•

Is there blockage of the air passage aperture?

• Is the air lter dirty?

•

Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the remedy, please set

FAN SPEED of the SERVICE item in the OPTION menu to HIGH.

REMINDER

*** HRS PASSED AFTER THE

LAST FILTER CHECK.

FILTER MAINTENANCE IS ESSEN-

TIAL

TO REMOVE WARNING MES-

SAGE,

RESET FILTER TIMER.

SEE MANUAL FURTHER INFO.

Anoteofprecautionwhencleaningtheairlter.

Please immediately turn the power off, and clean or change

the air lter referring to the “Air Filter” section of this manu-

al. After you have cleaned or changed the air lter, please

be sure to reset the lter timer.

Troubleshooting

99ViewSonic PJ1158

Troubleshooting

Regarding the indicator lamps

Lighting and ashing of the POWER indicator, the LAMP indicator, and the TEMP

indicator have the meanings as described in the table below. Please follow the

instructions within the table. If the same indication is displayed after the remedy,

or if an indication other than the following is displayed, please contact your dealer

or service company.

POWER

indicator

LAMP

indica-

tor

TEMP

indica-

tor

Description

Lighting

Orange

Turned

off

Turned

off

The projector is in a standby state.

Please refer to the section “Power On/Off”.

Blinking

In Green

Turned

off

Turned

off

The projector is warming up.

Please wait.

Lighting

Green

Turned

off

Turned

off

The projector is in an on state.

Ordinary operations may be performed.

Blinking

In Orange

Turned

off

Turned

off

The projector is cooling down.

Please wait.

Blinking

In Red

(discre-

tionary)

(discre-

tionary)

The projector is cooling down. A certain error

has been detected.

Please wait until the POWER indicator nishes blink-

ing, and then perform the proper measure using the

item descriptions below.

Blinking

In Red

Lighting

Red

Lighting

Red

Turned

off

The lamp does not light, and there is a possibil-

ity that interior portion has become heated.

Please turn the power off, and allow the projector to

cool down at least 20 minutes. After the projector has

sufciently cooled down, please make conrmation of

the following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air lter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the remedy,

please change the lamp referring to the section “Lamp”.

Blinking

In Red

Lighting

Red

Blinking

In Red

Turned

off

Thelampcoverhasnotbeenproperlyxed.

Please turn the power off, and allow the projector to

cool down at least 45 minutes. After the projector has

sufciently cooled down, please make conrmation of

the attachment state of the lamp cover. After perform

ing any needed maintenance, turn the power on again.

If the same indication is displayed after the remedy,

please contact your dealer or service company.

100ViewSonic PJ1158

Troubleshooting

Regarding the indicator lamps (continued)

POWER

indicator

LAMP

indica-

tor

TEMP

indica-

tor

Description

Blinking

In Red

Lighting

Red

Turned

off

Blinking

In Red

The cooling fan is not operating.

Please turn the power off, and allow the projector to

cool down at least 20 minutes. After the projector has

sufciently cooled down, please make conrmation

that no foreign matter has become caught in the fan,

etc., and then turn the power on again.

If the same indication is displayed after the remedy,

please contact your dealer or service company.

Blinking

In Red

Lighting

Red

Turned

off

Lighting

Red

There is a possibility that the interior portion

has become heated.

Please turn the power off, and allow the projector to

cool down at least 20 minutes. After the projector has

sufciently cooled down, please make conrmation of

the following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air lter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the remedy,

please set FAN SPEED of the SERVICE item in the

OPTION menu to HIGH.

Lighting

Green

Simultaneous

blinking in Red

Itistimetocleantheairlter.

Please immediately turn the power off, and clean or

change the air lter referring to the section “Air Filter”.

After cleaning or changing the air lter, please be sure

to reset the lter timer. After the remedy, reset the

power to ON.

Lighting

Green

Alternative

blinking in Red

There is a possibility that the interior portion

has become overcooled.

Please use the unit within the usage temperature pa-

rameters (5°C to 35°C). After the treatment, reset the

power to ON.

Blinking in

Green for

approx. 3

seconds

Turned

off

Turned

off

Atleast1“PowerON”scheduleissavedtothe

projector.

(Please refer to the User’s Manual-Network Functions:

Schedule Settings for more information.)

NOTE • When the interior portion has become overheated, for safety

purposes, the power source is automatically turned off, and the indicator lamps

may also be turned off. In such a case, press the “

” (OFF) side of the power

switch, and wait at least 45 minutes. After the projector has sufciently cooled

down, please make conrmation of the attachment state of the lamp and lamp

cover, and then turn the power on again.

101ViewSonic PJ1158

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects

WARNING ►Never use the projector if abnormal operations such as

smoke, strange odor, excessive sound, damaged casing or elements or cables,

penetration of liquids or foreign matter, etc. should occur. In such cases, imme

diately turn off the power switch and then disconnect the power plug from the

power outlet. After making sure that the smoke or odor has stopped, contact

your dealer or service company.

Before requesting repair, please check in accordance

with the following chart. This operation sometimes

resolves your problem.

If the situation cannot be corrected,

The projector’s microprocessor may need to be reset.

Please push the Shutdown switch by using a pin or

similar and the projector will be turned off immediately.

Before turning it again, wait at least 10 minutes to make the projector cool down enough.

Some setting may be wrong. Please use the FACTORY RESET function of the

SERVICE item in the OPTION menu

o reset all settings to factory default.

Then, if the problem is not removed after the remedy, please contact your dealer

or service company.

Phenomenon Cases not involving a machine defect

Refer-

ence

page

Power does not

come on.

The electrical power cord is not plugged in.

Correctly connect the power cord.

The power switch is not set to the on position.

Set the power switch to [ | ] (On).

The main power source has been interrupted during

operation such as by a power outage (blackout), etc.

Please turn the power off, and allow the projector to cool

down at least 2 minutes, then turn the power on again.

Either there is no lamp and/or lamp cover, or either

ofthesehasnotbeenproperlyxed.

Please turn the power off, and allow the projector to cool down

at least 45 minutes. After the projector has sufciently cooled

down, please make conrmation of the attachment state of the

lamp and lamp cover, and then turn the power on again.

Neither sounds

nor pictures are

outputted.

The signal cables are not correctly connected.

Correctly connect the connection cables.

Signal source does not correctly work.

Correctly set up the signal source device by referring to the

manual of the source device.

–

The input changeover settings are mismatched.

Select the input signal, and correct the settings.

17, 18

102ViewSonic PJ1158

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon Cases not involving a machine defect

Refer-

ence

page

Sound does not

come out.

The signal cables are not correctly connected.

Correctly connect the audio cables.

The MUTE function is working.

Restore the sound pressing the MUTE or VOLUME button

on the remote control.

The volume is adjusted to an extremely low level.

Adjust the volume to a higher level using the menu function

or the remote control.

The AUDIO setting is not correct.

Correctly set the items in the AUDIO menu.

No pictures are

displayed.

The lens cap is attached.

Remove the lens cover.

4, 16

The signal cables are not correctly connected.

Correctly connect the connection cables.

The brightness is adjusted to an extremely low level.

Adjust BRIGHTNESS to a higher level using the menu func-

tion or the remote control.

24, 26

The computer cannot detect the projector as a plug

and play monitor.

Make sure that the computer can detect a plug and play

monitor using another plug and play monitor.

The BLANK screen is displayed.

Press the BLANK button on the remote control.

Video screen

display freezes.

The FREEZE function is working.

Press the FREEZE button to restore the screen to normal.

Colors have a

faded- out

appearance, or

Color tone is

poor.

Color settings are not correctly adjusted.

Perform picture adjustments by changing the COLOR

TEMP, COLOR, TINT and/or COLOR SPACE settings, us

ing the menu functions.

25, 27,

COLOR SPACE setting is not suitable.

Change the COLOR SPACE setting to AUTO, RGB,

SMPTE240, REC709 or REC601.

Troubleshooting

103ViewSonic PJ1158

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon Cases not involving a machine defect

Refer-

ence

page

Pictures appear

dark.

The brightness and/or contrast are adjusted to an

extremely low level.

Adjust BRIGHTNESS and/or CONTRAST settings to a high-

er level using the menu function.

24, 25,

The WHISPER function is working.

Select NORMAL for the WHISPER item in the SETUP

menu.

25, 36

The lamp is approaching the end of its product life-

time.

Replace the lamp.

56, 57

Pictures appear

blurry.

Either the focus and/or horizontal phase settings are

not properly adjusted.

Adjust the focus using the focus ring, and/or H PHASE us-

ing the menu function.

19, 30

The lens is dirty or misty.

Clean the lens referring to the section “Caring for the lens”.

Pictures are

trembling.

The exhaust ventilation holes at front is blocked by

some objects.

Remove any objects from front side of the projector.

Troubleshooting

NOTE • Although bright spots or dark spots may appear on the screen, this

is a unique characteristic of liquid crystal displays, and it does not constitute or

imply a machine defect.

104ViewSonic PJ1158

Warranty And After-Service / Specication

Warranty and after-service

If a problem occurs with the equipment, rst refer to the “Troubleshooting” and run

through the suggested checks. If this does not resolve the problem, please contact your

dealer or service company. They will tell you what warranty condition is applied.

Specication

Item Specication

Product name Liquid crystal projector

Liquid

Crystal

Panel

Panel size 2.0 cm (0.79 type)

Drive system TFT active matrix

Pixels 786,432 pixels (1024 horizontal x 768 vertical)

Lens Zoom lens F=1.7 ~ 2.1 f=24 ~ 29 mm

Lamp 285W UHB

Speaker 4W x 4

Power supply

AC 100-120V/5.0A, AC220-240V/2.1A

Power consumption

460W

Temperature range

5 ~ 35°C (Operating)

Size

418 (W) x 139 (H) x 319 (D) mm

(Not including protruding parts)

* Please refer to the following gure.

Weight (mass) 7.1 kg

Ports

Optional

parts

Lamp RLC-021

Air lter * Please consult your dealer.

Others * Please consult your dealer.

RGB input port

RGB1 .......D-sub 15pin mini x1

RGB2 .......D-sub 15pin mini x1

RGB output port

RGB OUT

..D-sub 15pin mini x1

Digital input port

M1-D ..........................M1-D x1

Video input port

Y, C

.......... RCA x3

S-VIDEO ................S-video x1

VIDEO .......................Video x1

Audio input port

AUDIO IN1 .......Stereo mini x1

AUDIO IN2 .......Stereo mini x1

AUDIO IN3 ................. RCA x2

AUDIO IN4 ................. RCA x2

Communication port

CONTROL ..........

D-sub 9pin x1

Other ports

NETWORK ....................RJ45

REMOTE CONTROL

.........................Stereo mini x1

NOTE • These specications are subject to change without notice.

105ViewSonic PJ1158

Specications

Specications (continued)

418

319

154

139

[unit: mm]

106ViewSonic PJ1158

Customer Support

For technical support or product service, see the table below or contact your reseller.

Note : You will need the product serial number.

Country/

Region

Web Site

T=Telephone

F=Fax

E-mail

United States www.viewsonic.com/support/

T= 800 688 6688

F= 909 468 1202

service.us@viewsonic.com

Canada www.viewsonic.com/support T= 866 463 4775 service.ca@viewsonic.com

United

Kingdom

www.viewsoniceurope.com/uk T= 0207 949 0307 service.eu@viewsoniceurope.com

Europe,

Middle

East, Baltic

countries, and

North Africa

www.viewsoniceurope.com Contact your reseller service.eu@viewsoniceurope.com

Australia and

New Zealand

www.viewsonic.com.au/support/

AUS= 1800 880 818

NZ= 0800 008 822

service@au.viewsonic.com

Singapore/

Malaysia/

Thailand

www.viewsonic.com.sg/support/ T= 65 64616044 service@sg.viewsonic.com

South

Africa/Other

countries

www.viewsonic.com

T= 886 2 2246-3456

F= 886 2 2249-1751

service@sd.viewsonic.com

Hong Kong www.hk.viewsonic.com/support/ T= 852 3102 2900 service@hk.viewsonic.com

Macau www.hk.viewsonic.com/support/ T= 853 700 303 service@hk.viewsonic.com

Korea www.viewsonic.com T= 080 265 9080 service@kr.viewsonic.com

107ViewSonic PJ1158

Limited Warranty

VIEWSONIC

PROJECTOR

What the warranty covers:

ViewSonic warrants its products to be free from defects in material and workmanship, under normal

use, during the warranty period. If a product proves to be defective in material or workmanship

during the warranty period, ViewSonic will, at its sole option, repair or replace the product with

a like product. Replacement product or parts may include remanufactured or refurbished parts or

components.

How long the warranty is effective:

North and South America: 3 years for all parts excluding the lamp, 3 years for labor, 1 year for the

original lamp from the date of the rst consumer purchase.

Europe: 3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp from

the date of the rst consumer purchase.

Other regions or countries: Please check with your local dealer or local ViewSonic ofce for the

warranty information.

Lamp warranty subject to terms and conditions, verication and approval. Applies to manufacturer’s

installed lamp only.

All accessory lamps purchased separately are warranted for 90 days.

Who the warranty protects:

This warranty is valid only for the rst consumer purchaser.

What the warranty does not cover:

1. Any product on which the serial number has been defaced, modied or removed.

2. Damage, deterioration or malfunction resulting from:

a. Accident, misuse, neglect, re, water, lightning, or other acts of nature, unauthorized

product modication, or failure to follow instructions supplied with the product.

b. Repair or attempted repair by anyone not authorized by ViewSonic.

c. Any damage of the product due to shipment.

d. Removal or installation of the product.

e. Causes external to the product, such as electric power uctuations or failure.

f. Use of supplies or parts not meeting ViewSonic’s specications.

g. Normal wear and tear.

h. Any other cause which does not relate to a product defect.

3. Any product exhibiting a condition commonly known as “image built-in” which results when a

static image is displayed on the product for an extended period of time.

4. Removal, installation, and set-up service charges.

How to get service:

1. For information about receiving service under warranty, contact ViewSonic Customer Support

(Please refer to Customer Support page). You will need to provide your product’s serial number.

2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b)

your name, (c) your address, (d) a description of the problem, and (e) the serial number of the

product.

3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic

service center or ViewSonic.

108ViewSonic PJ1158

4. For additional information or the name of the nearest ViewSonic service center, contact

ViewSonic.

5. For applicable models with the PIN code security feature only. This projector contains a

personal identication number (PIN) that restricts access to authorized users. If you forget to

record the PIN code in the User Guide with your Serial Number, you will have to send in the

unit for service so the code can be reset. However, if you register your product serial number

with ViewSonic, along with your PIN code, it will be retained on le with your registration

should you need it in the future.”

Limitation of implied warranties:

There are no warranties, express or implied, which extend beyond the description contained herein

including the implied warranty of merchantability and tness for a particular purpose.

Exclusion of damages:

ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall

not be liable for:

1. Damage to other property caused by any defects in the product, damaged based upon

inconvenience, loss of use of the product, loss of time, loss of prots, loss of business

opportunity, loss of goodwill, interference with business relationships, or other commercil loss,

even if advised of the possibility of such damages.

2. Any other damages, whether incidental, consequential or otherwise.

3. Any claim against the customer by other party.

Effect of state law:

This warranty gives you specic legal rights, and you may also have other rights which vary from

state to state. Some states do not allow limitations on implied warranties and/or do not allow the

exclusion of incidental or consequential damages, so the above limitations and exclusions may not

apply to you.

Sales outside the U.S.A. and Canada:

For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada,

contact ViewSonic or your local ViewSonic dealer.

The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded)

is subject to the terms and conditions of the Maintenance Guarantee Card.

4.3: Projector Warranty PRJ_LW03 Rev. 1a 06-30-06

109ViewSonic PJ1158

Viewsonic pj 1158 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Viewsonic pj 1158

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info