813781
44
Verklein
Vergroot
Pagina terug
1/112
Pagina verder
44
Note
To ensure the bypass works correctly, set the room
temperature for ventilation as follows:
Vitovent 200-C:
Set the value approx. 2 °C higher than the standard
temperature for central heating/central cooling and
"Party mode".
All other ventilation units:
Set the value no more than 4 °C higher or lower
than the standard temperature for central heating/
central cooling and "Party mode".
We recommend setting the value to at least 1 °C
higher.
Standard room temperature for central heating/central
cooling and "Party mode": See pages 26 and 31.
1. Extended menu:
2. "Ventilation"
3. "Set room temperature"
4. Set the required value.
Note
This menu is not available if your heating circuit HC1 is
a ventilation heating circuit.
Setting the minimum temperature for ventilation
Applies to Vitovent 200-C and Vitovent 300-F only.
Factory setting: 16 °C
As soon as the outdoor air temperature at the inlet to
the ventilation unit exceeds the minimum temperature
set here, ventilation without heat recovery can take
place.
Note
The lower the setting for this temperature, the higher
the risk of condensate build-up on the outside of the
ductwork. This condensate build-up can cause dam-
age to the building.
1. Extended menu:
2. "Ventilation"
3. "Min supply air t. byp"
4. Set the required value.
Setting a time program for ventilation
In the time program for ventilation you set the time
phrases during which your home is ventilated and at
what air flow rate.
To do so, select an operating status for each time
phase: See chapter "Operating status for ventilation".
Factory setting: one time phase from 00:00 to 24:00 h
for every day of the week with the "Standard" operat-
ing status
Note
We recommend maintaining the factory setting, par-
ticularly if your heating circuit HC1 is a ventilation
heating circuit.
The time program for ventilation is only active in the
"Ventilation program" operating program.
1. Extended menu:
2. "Ventilation"
3. "Time prog ventilation"
4. Set the required time phases and operating status.
To see how to set a time program: See page 23.
Note
Between the set time phases, mechanical ventilation
takes place with the minimum air flow rate (
1
).
Operating status for ventilation
"Reduced" (
2
)
Reduced air flow rate:
Approx. 70 % of the standard flow rate: see "Stand-
ard".
"Standard" (
3
)
Standard air flow rate
"Intensive" (
4
)
Maximum air flow rate:
Approx. 125 % of the standard flow rate: see
"Standard".
Mechanical ventilation
Ventilation without heat recovery (cont.)
5817913
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Viessmann VITOTRONIC 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Viessmann VITOTRONIC 200 in de taal/talen: Engels als bijlage per email.

De handleiding is 3.87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Viessmann VITOTRONIC 200

Viessmann VITOTRONIC 200 Gebruiksaanwijzing - Nederlands - 112 pagina's

Viessmann VITOTRONIC 200 Gebruiksaanwijzing - Deutsch - 112 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info