529135
12
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
Operating Instructions..........
Bedienungsanleitung............
Consignes d'utilisation.........
6
Viewing extra information
The DRX-602ES has two information modes. Press the Info button and repeat or hold to view the information modes.
Signal strength Displays the strength of the signal for the current multiplex. Maximum strength is shown by 16 bars.
If sound quality is poor you may be able to increase signal strength by repositioning your aerial.
Mode Displays the mode of the current service, Stereo (ST) or Mono (MN) and the data rate at which the
audio signal is being transmitted. The data rate is set by the broadcaster to suit the type and
quality of material being transmitted.
Changing your tuning zone
Your DRX-602ES can receive both Band III and L-band DAB transmissions. To speed up the autotune process you can
restrict the frequencies scanned by selecting one of three tuning zones: UK (Part of Band III), Canada (Band III +
Canada L-band) or Rest of World (Band III+Europe L-band). The tuning zone is selected when you first set up the unit.
To change your tuning zone:
1. Press and release the Autotune button three times.
2. Rotate the large tuning button to select the required zone and press the Autotune button again to confirm your
selection. You can now select the display language as described below.
Changing your display language
You can set the display to one of 11 languages. If you are setting your display language directly after setting your tuning
zone go straight to step 2 below.
1. Press and release the Autotune button four times.
2. Rotate the large tuning button to select the required language and press the Autotune button again to confirm
your selection. You can now tune your DRX-602ES as described below.
Switching on and off
We recommend that you switch off your DRX-602ES when not in use to prevent energy wastage. If you leave the unit
switched off for an extended period (around a month or longer) you may need to re-tune the unit to refresh the
available services.
Push and release the Power button to switch the unit on or off.
Tuning
Tuning the DRX-602ES is very simple. In most cases you only need to perform this operation once, when you first set up
the unit. If you are tuning directly after setting your display language go straight to step 2 below.
1. Push and release the Autotune button. The display will indicate tuning is underway.
2. If you want to cancel the autotune procedure, push and release the Autotune button a second time during tuning.
When finished, you will; hear the first service found and its name will be shown on the display. All the services
found are now stored in the unit.
If no services are found the display will show NO ENSEMBLES. Check your aerial connection and positioning and try the
tuning process again.
You may want to repeat this process in the future if you change your aerial position or if you want to receive a newly
introduced service.
7
Using the remote control
This section provides information on using the remote control. The infrared remote control provides access to the main functions of your DRX-602ES
and also advanced facilities such as presets and dynamic range control. Before using your remote, insert the supplied batteries. Aim the remote
control at the sensor on the display panel on your DRX-602ES.
Buttons (1-9) and the STORE button enable you to store your favourite radio services for easy access.
To store a service
While listening to the service you want to store.
1. Press the STORE button. The display on your DRX-602ES shows PRESET_ _?
2. Press the number (from 1 to 99) under which you want to store the preset.
3. Press the SELECT button to confirm your selection.
To recall a previously stored service
Press the numbered button(s) under which you stored the service.
The DRC Dynamic Range Control button enables you to alter the dynamic range of the received audio (dependent on
broadcast material) by making the quieter sounds in a broadcast more audible. This may be useful in noisy
environments or particularly quiet parts of programmes.
Press the DRC button to check whether DRC is available for the current service then press the DRC button again to
toggle DRC on or off. The default setting is off.
Press the DISPLAY button and repeat or hold down to cycle through the four display options.
This button performs the
same function as the Display button on the main unit. See Using your DRX-602ES: Changing the display for details.
The INFO button enables you to change the information mode on your DRX-602ES. This button performs the same
function as the Info button on the main unit, see Using your DRX-602ES: Viewing extra information for details.
Press the INFO button and repeat or hold to view the two information modes.
The !" and SELECT buttons enable you to cycle through and select services. Together, these buttons perform the
same function as the large tuning button on the main unit, see Using your DRX-602ES: Selecting a service for details.
1. Press and release or hold the ! or " button to cycle through the stored services.
2. The bottom line of the display on your DRX-602ES shows the service names.
3. Press the SELECT button to select and listen to the displayed service.
The PRI/SEC button enables you to select between the primary and secondary services where secondary services are
available. If a secondary service is available for the current service, the Secondary LED will light up on the front of your
DRX-602ES. Press the PRI/SEC button and repeat or hold to cycle through the available services. For an explanation
of primary and secondary services, see Guide to Digital Radio.
The MUTE button is a quick way of reducing the output volume from your DRX-602ES.
1. Press the MUTE button to mute the sound. The display on your DRX-602E shows MUTE.
2. Press any key on the remote control or main unit to return to the previous listening volume.
8
Guide to Digital Radio
This section provides a brief guide to digital radio (DAB), explains how the features of your DRX-602ES provide access to it, and provides some
useful addresses for finding out more.
Your DRX-602ES enables you to receive and listen to Digital Audio Broadcast (DAB) digital radio programmes. DAB uses digital transmission rather
than traditional analogue transmission, providing near CD-quality audio with virtually interference-free reception. DAB also enables broadcasters to
transmit additional data along with the audio including other audio channels, text and in the future, perhaps computer data and images.
DAB digital radio is broadcast as groups of data called multiplexes or ensembles . Each multiplex can contain a number of services (stations) and
each service contains a primary service and can also contain secondary services as illustrated in the following diagram. Each multiplex is
transmitted at a set frequency and is received by your DRX-602ES for decoding. Your DRX-602ES can receive multiplexes broadcast on all DAB
frequencies (Band III and L-Band). The number of multiplexes and radio stations you receive, will vary depending on your location.
With DAB, radio stations have labels (names) which are used to identify them. Instead of needing to know a particular frequency to listen to your
favourite broadcast you can simply select the station name. Secondary services and additional data such as text containing programme or multiplex
information are also easily accessed using your DRX-602ES.
Useful addresses
The following addresses provide additional useful information about digital radio including coverage, available services and usage tips:
WorldDAB
web: www.worlddab.org
tel: +44 (0)20 7288 4642
fax: +44 (0)20 7288 4643
DAB Signal
Multiplex
National DAB
Primary DAB Services
Main higher bandwidth services
e.g music, speech
Secondary DAB Services
Lower bandwidth services
e.g. news, text information, speech
10
Getting Help
The Troubleshooting section of this manual, lists some of the more likely reasons for problems you might have with your DRX-602ES.
If you still have a problem with your DRX-602ES, either visit our website at www.videologic.com or www.videologic.de or contact us using the details
on the back cover of this manual for the latest support information.
Accessories
VideoLogic supply a range of accessories and complementary products for your DRX-602ES including external aerials, signal boosters, aerial cable
adapters and amplified speaker sets.
Visit our website at www.videologic.com or www.videologic.de or contact us using the details on the back cover of this manual to find out more.
Aerial advice
Your DRX-602ES is supplied with a T-shaped ribbon dipole aerial. This is an indoor aerial which is designed to give good reception in areas with good
to moderate DAB signal strength. In areas with poor DAB coverage or poor signal strength you may want to consider using a loft mounted or external
aerial. To find out about coverage in your area, see Guide to Digital Radio.
Ribbon Aerial 4-element AerialDipole Aerial
The following options may help you improve reception in your area and are available from the on-line store on our website, see Accessories.
1. Ribbon Aerial Optimise the position of your ribbon aerial by mounting it as high as possible and extending the arms vertically. Use the Signal
Strength meter to fine tune the aerial placement, see Using your DRX-602ES: Viewing extra information.
2. TV/FM Aerial If you have an externally mounted TV or FM aerial it may provide a stronger signal than an indoor aerial but as they are not tuned
for the digital radio frequency range and are pointed at your local TV/FM transmitter, reception may be no better. The standard TV or FM RF
connector cannot be plugged into your DRX-602ES directly, you will need to use an RF to F-type adapter. You may also find that you need to use a
signal booster if you want to use the aerial for both TV or FM and DAB reception.
3. External or loft mounted DAB Aerial Two main types are used. These types of aerials may require professional installation:
Dipole - for use in marginal signal areas, this type is omnidirectional and should increase the strength of all DAB stations being received.
4-element aerial - for use in marginal or poor signal areas, this type is directional and has high gain. Like a TV or FM aerial this type needs to
point at the transmitter. Installation requires someone to move the aerial while you monitor signal strength. If you receive signals from multiple
transmitters you should point your aerial at the one which gives the best signal for the services to which you want to listen.
4. Signal booster This is a signal amplifier which connects into an aerial cable and boosts the strength of the received signal. If your ribbon aerial
works fairly well this may be the easiest and best option.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Videologic DRX-602ES bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Videologic DRX-602ES in de taal/talen: Engels als bijlage per email.

De handleiding is 0,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Videologic DRX-602ES

Videologic DRX-602ES Gebruiksaanwijzing - Deutsch - 15 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info