Display has gone blank
This may occur if a broadcaster changes the label of a service or removes a label whilst you are listening to it. As the display is constantly updated it
therefore may go blank. Follow the Autotune procedure, on page 7, to restore all available services to your unit.
I’ve lost my remote control
If you lose your remote control you can still use your DRX-601EX but you will not be able to access your preset stations, switch between primary or
secondary services or use DRC or mute facilities. Contact VideoLogic Support to obtain a replacement remote control, see page 19 for details.
I can’t hear my auxillary device although it is connected
Ensure that the connections to your auxillary device are secure and that you have set the source selection switch on the side panel to AUX IN, as
described on page 6.
Ensure that your auxillary source is switched on and playing.
I can’t hear the station I have selected on the display
To hear the station you need to confirm your selection by pressing the large tuning knob, as described on page 8, or the SELECT button on your
remote control.
I hear a ‘burbling’ sound on some stations
Although DAB is excellent at providing quality audio from very little signal, the quality can suffer if the signal strength is too low. If that happens, a
‘burbling’ sound can sometimes be heard.
To help reduce this, check that your aerial is connected and extended, as described on page 5.
If the problem persists try repositioning your unit and repeating the autotune procedure, if not then a signal booster may be the solution - these are
available from our on-line store at www.videologic.com
For the latest troubleshooting information and a list of Frequently Asked Questions (FAQs), visit the DRX-601EX support section on our website at
www.videologic.com/pure.
15
