785240
6
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
4
4. Clock adjust: hour, minute flash, press K2, K3 modify the data, press K4 to save it.
System checking: at any time, press K3+K4, it will check and display the related data automatically. Details as in PICTURE 4. If there is
NO, means there is no connection. If the connections are correct, the related data will be displayed. If no remote temperature sensor is
connected, the meter will show thermometer and NO. If connection is correct, it will show the data it detects. OPEN means no battery
connection or over voltage, the data will be displayed while the connection is right.
Data erase to 0: at any time, press K1+K2the data will be erased to 0, such as max, min, Ah. AH accumulate from 0.
OTHER INSTRUCTION:
Specifications:
Rated voltage : 12V, min voltage (suggest): 8.0V.
Strong backlight on : <23mA,
Low backlight on : <20mA
Backlight and LED indicator off : <17mA
Operation temperature : -40 ~ +60
LCD operation temperature : -10 ~ +40
Humidity : 0-100%
Communication cable : RJ45(8PIN), 10 meter.
Trouble indicator on : following occasion may occur, check the connection. And the symbol will disappear automatically when it
resumes.
1. While one battery disconnect, or open circuit, or over voltage.
2. The remote temperature sensor is no probe.
3. Over charging current
4. Solar PV short-circuits.
Telecommunication port: while the meter run by individual power or the communication cut off, it displays 4 pieces of “_”. Press key, no
answer. The display will resume while communications is on.
Note: the data displayed got from the communication, check if the cable correct while the data is error, or if there is strong interference.
A too long cable may bring errors too. The data will update every 20 seconds.
Battery capacity strip flash: each strip equals 20% of battery capacity. The over part will be shown as flashing. For example, the first
trip flash, the battery capacity is 1-19%, the second trip flash, it is 21-39%, etc.
Note: the calculation takes fully charged voltage as 100%, and over discharged as 0%. All is based on battery voltage, not the real battery
capacity.
Battery capacity AH: AH is the accumulation of charging, each one minute will count. The data is not accurate while the charge current
is too small. The min. is 1AH, means 1amps charging for 1 hour, AH comes to show.
(all rights reserved )
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Victron Remote Panel voor BlueSolar regelaar DUO bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Victron Remote Panel voor BlueSolar regelaar DUO in de taal/talen: Engels als bijlage per email.

De handleiding is 0.64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info