785208
7
Verklein
Vergroot
Pagina terug
1/71
Pagina verder
4
3. Description of the Digital Multi Control panel
The DMC is a remote panel designed to work with all Multis/Quattro’s and Multi/Quattro systems.
This includes stand alone, parallel and 2-3 phase configurations. Both VE.Bus and non VE.Bus
systems are supported.
With the DMC a separate shore current and generator current can be set.
When used in an extended VE.Bus system one can even set up to 4 different shore currents.
For VE.Bus systems, the DMC will automatically adapt the adjustable range to match with the
connected system.
3.1 Generator support
The DMC provides a means to change the AC input current limit when the AC source is switched
externally from shore to generator.
Normally the DMC will send the shore current set point as determined by the knob to the
connected devices. If however the terminals of the screw connector on the backside of the DMC
are short circuited the DMC sends a preconfigured shore limit to the connected devices.
This preconfigured limit is generally used for a generator. The display on the DMC will therefore
show: .
The two terminals of the screw connector are to be connected to an externally controlled switch.
Normally spoken this will be an auxiliary relay of an external transfer switch.
3.2 Connecting VE.Bus devices
Using the DMC with VE.Bus devices is straightforward. Just connect the DMC to the system. The
maximum/minimum shore currents which can be set are automatically adapted to the system.
This means that:
- Connecting the DMC to one Multi with 16A feed through capacity will limit the maximum shore
setting to 16A.
- Connecting the DMC to five of these Multis in parallel will result in 80A as maximum shore limit.
(If needed, an upper limit can be set to prevent the operator from setting a too high shore limit.
(See section 6.4)
The DMC is capable of dealing with a Quattro or an extended VE.Bus system which has more
than 1 AC input. When the system switches over from one AC input to another, the DMC switches
too, setting the current limit to the last used value for that AC input.
In the Multi/Quattro configuration it is possible to indicate that a shore current limit is not to be
overruled by the remote panel. In such a case the DMC will not display a shore current limit value
but it will display the AC input identification as , , or .
If, in a system with more than 1 input, the corresponding input does allow changing by the remote
panel, the DMC will display the shore current value and the AC input identification alternating.
Exception to this is AC input 1. If AC input 1 is active only the shore current value will be
displayed and not the AC input identification.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Victron Digital Multi Control 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Victron Digital Multi Control 200 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 0.41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info