785457
14
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
Last update: 2018-08-21 10:10 ccgx:start https://www.victronenergy.com/live/ccgx:start
https://www.victronenergy.com/live/ Printed on 2018-08-21 11:59
Item Default Description
Demo mode Off Turn 'On' to demonstrate product and installation features to a client or at an exhibition. This simulation mode will allow
better understanding without (yet) changing any settings.
Firmware
Online
updates: Auto
update
Check
and
update
We recommend the factory default. A reason to disable it would be to eliminate the risk of a firmware update causing
problems.
Online
updates:
Update to
Latest
release
Use the default setting unless you want to participate in test versions. End-user systems should certainly be set to 'Latest
release'.
Offline updates Use this menu to install a new version from a microSD card or USB stick. Insert the card or stick that holds the new
firmware .swu file.
Stored backup firmware With this feature you can go back to the previously installed firmware version.
Date & time
Date/Time
local
Automatic
from
internet
When connected to the internet, time will be automatically synchronised regardless of this setting. Toggle the setting
Manually input the time where no internet connection is present.
Change time
zone Select the correct time zone.
Remote
console
Disable
password
check
Password authentication not required for remote consul access.
Enable
password
check
Choose password to allow remote console access.
Enable on VRM No Enabling on VRM will allow connection to the CCGX from anywhere via the VRM portal. Trouble shooting Remote Console
on VRM
Enable on LAN No Enabling will allow direct connection to the CCGX by typing it's IP address into a web browser. Only Enable this function
on trusted networks.
System setup
AC input 1 Generator Select Generator or Grid. (We will shortly be adding the setting 'Shore power' instead of grid.)
AC input 2 Grid Same choices as above.
Battery
monitor Automatic Select the SOC source. This function is useful where there is more than one BMV. More details.
Synchronize VE.Bus SOC
with battery
Continuously copies the SOC from the battery monitor to the VE.Bus system. This feature is automatically enabled when
the active SOC source is not a VE.Bus device, and there is no Hub-2 Assistant configured. The purpose of this is to be
able to use the BMV SOC to trigger some Multi or Quattro features - such as Genset start/stop. Multis and Quattro's don't
use the SOC for any other purpose. More information
Use solar charger current
to improve VE.Bus SOC
Send the total charge current from all connected Solar chargers to the VE.Bus device to improve its SOC computations.
This feature is automatically active when 'Synchronize VE.Bus SOC with battery' is not active. Requires Multi Firmware
version >= 402. More information
Solar charger voltage
control
Use the 'charge voltage' information provided by the VE.Bus device to control the amount of power fed from solar
chargers back to the grid. Active if the ESS or Hub-1 assistant is present. (See also: 'Feed-in excess solar charger power'
in the ESS settings.)
Solar charger current
control
Limit the charge current of the connected solar chargers if a CAN.bus BMS is present - using the maximum charge
current information provided by the BMS.
Has DC system No
Enable this for boats, vehicles and installations with DC loads and chargers - in addition to Multi and MPPT chargers. This
won't be applicable to most off-grid installations; and any discrepancy between the DC current measured by the Multi,
and by the BMV, will be attributed to a 'DC system'. This may be power-in from an alternator, or power-out from a pump,
for example. Note that the value shown will always be an approximation. (In order make these changes in the system
setup page, you have to change the access level to User & installer. The initial password is “zzz”)
Display & language
Brightness Configure the brightness between 0 and 100%
Display off
time Set time-to-off between 10s / 30s - 1m / 10m /30m - or never
Show mobile
overview No
Enable this to show the mobile overview page which is designed for Marine and Remote Vehicle applications. This
overview gives direct access to the AC Current limit as well as the On/Off/Charger-only settings and pump control. Also
shows up to four tank levels.
Language English Choose between English, Dutch, Chinese, German, Spanish, French, Italian, Swedish, Turkish and Arabic.
VRM online portal
Log to Internet Choose between no logging, logging via the internet directly to the VRM Portal, and logging to a microSD card or USB
flash drive. See chapter 2.2 below for more information.
Log interval 15
minutes
Set to anything between 1 minute and 1 day. Choose longer times on systems with an unreliable connection. Note that
this setting does not affect reporting problems and state changes (bulk → absorption) to the VRM Portal. These events
initiate an immediate transmission of all parameters.
Wireless AC Sensors
Select the position for each AC sensor (PV Inverter on AC-input 1, 2 or on AC-output). More information about the Wireless AC sensors.
Energy meters
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Victron Color Control GX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Victron Color Control GX in de taal/talen: Engels als bijlage per email.

De handleiding is 0.97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info