To fold the wheelchair:
1. Pull the seat cushion and remove it.
2. Depending on type of footplate (8):
• Open footplate: Unlock and turn it up
• Foldable footplate: Pull it up to fold
3. Grab the front and back of the seat (15) in the middle,
and pull to close.
4. Push seat frame tubes (5) together.
5. Remove the rear wheels if necessary, see §2.5.
To unfold the wheelchair:
1. Pull the seat frame tubes (5) outwards, and push the seat
frame down at the left and right side until the seat is flat
and the frame is locked into place.
2. If removed, assemble the rear wheels, see §2.5.
3. Place the seat cushion (4) on the Velcro straps of the
seat. Make sure that the straps of the seat cushion lie
transverse over the straps of the seat.
4. Depending on type of footplate (8):
• Open footplate: Turn it down until it is locked.
• Foldable footplate: Push it down until it is blocked.
2.5 (Dis)Assembling rear wheels
To remove the rear wheels
1. Press and hold button (43) while sliding the wheel axle out of the hole of the frame.
2. Repeat this for the other wheel and place the wheelchair gently on the rear frame tubes.
To install the rear wheels
1. Take one of the rear wheels and lift the wheelchair on one
side.
2. Press and hold button (43) while sliding the wheel into the
axle bushy.
3. Release the button to lock the wheel. Make sure it clicks
into place.
4. Repeat this for the other wheel.
5. Ensure that both wheels are firmly secured.
2.6 Storage
