Eclips+ AD
2011-03
!"#$%-%
To apply the brakes:
1. Push the brake handles ! forward till you feel a
distinctive click.
!" CAUTION: Risk of unintended movement !
Make sure the wheelchair is on a flat
horizontal surface before releasing the
brakes. Never release both brakes
simultaneously.
To release the brakes:
1. Release one brake by pulling the handle !
backwards.
2. Hold the hand-rim of the release wheel with
your hand.
3. Release the second brake by pulling the handle
backwards.
2.6 Mounting or removing of arm supports
!
"CAUTION: Risk of clamping ! Keep fingers, buckles and clothes away from the
bottom side of the arm support.
The arm supports of the wheelchair can be mounted by following instructions.
1. Mount the rear tube of the arm rest in tube hood
!. (Fig A)
2. Make sure the arm support is mounted very well.
3. Fold the arm rest forward.
4. Pull the lever
"#on tube hood $#upwards. (Fig B)
5. Click the front tube of the arm rest % in tube hood
$. (Fig B)
To open and remove the arm rest:
1. Pull lever
" and pull the front of the arm rest ! upwards. (Fig C)
2. Fold the arm rest backwards.
3. To remove the arm rest, pull the rear of the arm support from tube hood $. (Fig D)
