567740
18
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
www.velodyne.com
12 - Optimum Series User’s Manual
EQ
This button automatically EQs the subwoofer using a 7-band internal parametric equalizer. To use this feature,
rst plug the supplied microphone into the Mic Input jack on the front panel of the subwoofer and place the mic
on its stand and in your preferred listening position. Then, by pressing EQ on the remote, the subwoofer emits
12 “sweep tones” that cover the frequencies between 20 and 150 Hz. After the sweeps are complete, the unit
calculates and saves its EQ settings, then returns to normal operation. In order to avoid accidentally activating
the EQ feature, you will need to hold down the EQ button for 1 to 2 seconds before the EQ sweep tones activate.
NOTE: Each time the EQ feature is utilized, the EQ settings for the Optimum subwoofer are reset. If the
microphone is not plugged in, the Optimum subwoofer will emit two sweep tones then cease the EQ operation.
In this case, the previous EQ settings will be preserved.
PHASE
These buttons allow you to optimize the subwoofer performance for the location and your listening position.
Select the switch position at which you hear the most bass. The setting will be shown in the front panel display
by “PH” followed by the phase setting selected — 0, 90, 180 or 270 degrees.
LIGHT
If you wish, you can deactivate the blue front panel display on your Optimum unit. To do this, press the LIGHT
button on your remote. The display will turn o. It will turn on briey to reect any other setting changes while
deactivated. To reactivate the display, press the LIGHT button again.
NIGHT
Night mode limits the maximum dynamic output of the subwoofer for later night listening or to be more
considerate of close neighbors. Press the night button to turn the night mode feature on or o. Activation of
night mode causes “n” to appear briey on the display. When night mode is deactivated, the display shows “n
o” and then returns to normal function.
VOLUME CONTROL
This control allows you to balance the output from the subwoofer to the main speakers in your system. This
control should be set to achieve similar volume level from both the main speakers and subwoofer. When pressing
the volume up or down, the setting is shown in the frontmounted LED display as a number between 00 and 80.
NOTE: The volume can also be adjusted via the buttons on the back panel of the subwoofer. These buttons
have the same eect as pressing the up and down volume buttons on your remote. The unit comes preset from
the factory with the volume set at 30 out of a maximum setting of 80.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Velodyne Optimum-12 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Velodyne Optimum-12 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Velodyne Optimum-12

Velodyne Optimum-12 Aanvulling / aanpassing - English - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info