622072
6
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
WS1170 Rev. 04
21.01.2015 ©Velleman nv
6
The alarm will automatically reactivate once the value has
fallen below the set temperature value or if a new value is
entered.
The outdoor weather alarm
When a set outdoor alarm has been triggered, it will flash on the
LCD display. The general outdoor alarm icon and HI / LO alarm
icon will flash accordingly. Example: In outdoor temperature
mode, the dew point icon will flash along the outdoor alarm and
the HI alarm icons when the dew point HI alarm is triggered.
This will indicate that the current alarm source is from the dew
point.
d. MIN / MAX Mode
Press MIN / MAX to enter the MAX mode. MAX and the
maximum record will be displayed.
Press MIN / MAX to enter the MIN mode. MIN and the minimum
record will be displayed.
Press MIN / MAX to return to the normal display mode.
In MAX mode, press + to display the following maximum values with their time and date: Indoor
humidity maximum Indoor temperature maximum Outdoor humidity maximum Outdoor
temperature maximum Pressure maximum.
In MIN mode, press + to display the following minimum values with their time and date: Indoor humidity
minimum Indoor temperature minimum Outdoor humidity minimum Outdoor temperature minimum
Pressure minimum.
Press SNOOZE / LIGHT to return to the normal display mode
Reset
The SET button resets the values in MIN or MAX mode. To reset the values:
In MIN or MAX mode, press and hold SET for 2 seconds to reset the MIN or MAX values and h-the time
and date.
To reset the device, remove the batteries from the device.
e. Calibrating Indoor and Outdoor Humidity
The WS1170 weather station allows you to calibrate both the indoor and the outdoor humidity. Humidity is
a difficult parameter to measure accurately. The calibration option allows you to zero out this error. Note
that you will need a hygrometer calibration pack (not included).
Proceed as follows:
1. Press SET and select the indoor humidity function.
2. Press + or MIN / MAX to increase or decrease the humidity setting in increments of 1 % until the setting
matches the calibrated humidity source.
3. Press and hold SET for 3 seconds to confirm.
4. Do the same for the outdoor humidity function.
Note: The remote outdoor sensor will not display the calibrated humidity level but only the measured
humidity level. The dew point calculation is based on the calibrated humidity level.
9. Troubleshooting
Problem
Possible Cause
Solution
Transmission problem
Distance between the two units is too long
Shielding materials between two units
(thick wall, steel…)
Interference from other sources
Reduce distance
Find a different mounting location
Eliminate interference sources
Data on LCD is illegible
No data reception
Low batteries
Find a different mounting location
Replace batteries
Incorrect data
Low batteries
Incorrect settings
Replace batteries
Reprogram the weather station
10. Technical specifications
Indoor Station
Temperature Range
0°C ~ +60°C (OFL displayed when out of range)
Resolution
0.1°C
Relative Humidity
1% ~ 99%
Resolution
1%
Atmospheric Pressure
919 hPa ~ 1080 hPa
Resolution / Accuracy
0.1 hPa / 1.5 hPa
Alarm Duration
120 sec
Temperature display mode
Dew point HI alarm triggered
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Velleman WS1170 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Velleman WS1170 in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 1,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info