585216
9
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
HAM982K 9 VELLEMAN
l. Setting "HOME" mode (location HOME)
1. Enter the location: 'HOME'.
2. Enter the zones to be isolated: 1-8 (default: none)
- Several zones can be set to 'isolation' at once: continuous entry is possible.
- Setting a 24h zone to isolation is not recommended – an isolated zone is not protected.
- The 'HOME' mode is convenient to isolate several zones at once without having to isolate each zone separately.
The HOME mode can simply be activated by entering a user code, pressing 'HOME' and '#' to confirm..
3. Validate the entered selection with '#'.
m. Resetting the default values (location 02)
1. Enter location: '02': the default settings will be restored (see "7. Factory Presets") but NOT the master code.
2. Validate the reset command with '#'.
n. Exiting the programming mode
To exit the programming mode and return to the operational mode, press the '' key twice.
9. AC or Battery Power
a. AC Power Indication
The AC power LED is lit when the AC power supply is normal ; it flashes when there is an AC power failure. The
control console produces one beep every 30 seconds during a power failure.
b. Battery Testing
The system performs dynamic battery testing on the standby battery by interrupting AC power for 2 minutes and
monitoring the battery under loaded condition.
Battery testing can be programmed (see "8.k. Setting the Periodic Battery Test").
Battery testing can be performed manually at any time by entering a user code, followed by '', '4' and '#'.
The battery status is always shown on the BATTERY LED indicator.
The system produces a beep every 30 seconds when the battery is low, until a new test considers the battery to
be normal again.
Battery testing is not possible during AC power failure or when the system is in alarm.
c. Battery Low Indications & Auto Reset
The battery low indication begins at 11.0V in a loaded condition during battery testing.
The battery low indication begins at 11.0V for more than 2 minutes during AC power failure.
The system will be reset to stop working when the battery voltage drops to 10V during AC power failure.
d. Power-up Delay
The system can be programmed with or without power-up delay by entering the appropriate command code at
location 85.
The AC POWER and BATTERY lights flash alternately and the system does not function during power-up delay.
e. Back-up Battery
The battery should be of the 12V/1.2Ah sealed lead acid rechargeable type. It is protected by a 2.5A resettable fuse.
The maximum battery charge current in the system is 350mA. Standby time is approximately 16 hours at 250mA.
The back-up battery should be replaced every 3 to 5 years.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Velleman HAM982K bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Velleman HAM982K in de taal/talen: Nederlands, Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 1,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info