Handleiding Vauxhall Combo 2013 (pagina 84 van 185) (Engels)

529296

Verklein

Vergroot

Pagina terug

1/185

Pagina verder

0 - 1Owner’s Manual Model Year 2014 Edition: August 2013 KTA-2730/2-VX-en

VAUXHALL Combo

Owner’s Manual

Model Year 2014

Edition: August 2013

KTA-2730/2-VX-en

Introduction .................................... 2

In brief ............................................ 6

Keys, doors and windows ............ 19

Seats, restraints ........................... 32

Storage ........................................ 53

Instruments and controls ............. 61

Lighting ........................................ 88

Climate control ............................. 95

Driving and operating ................. 101

Vehicle care ............................... 125

Service and maintenance .......... 158

Technical data ........................... 161

Customer information ................ 177

Index .......................................... 180

Contents

2 Introduction

Introduction

Introduction 3

Vehicle specific data

Please enter your vehicle's data on

the previous page to keep it easily

accessible. This information is

available in the sections "Service and

maintenance" and "Technical data"

as well as on the identification plate.

Introduction

Your vehicle is a designed

combination of advanced technology,

safety, environmental friendliness

and economy.

This Owner's Manual provides you

with all the necessary information to

enable you to drive your vehicle

safely and efficiently.

Make sure your passengers are

aware of the possible risk of accident

and injury which may result from

improper use of the vehicle.

You must always comply with the

specific laws and regulations of the

country that you are in. These laws

may differ from the information in this

Owner's Manual.

When this Owner's Manual refers to a

workshop visit, we recommend your

Vauxhall Authorised Repairer.

All Vauxhall Authorised Repairers

provide first-class service at

reasonable prices. Experienced

mechanics trained by Vauxhall work

according to specific Vauxhall

instructions.

The customer literature pack should

always be kept ready to hand in the

vehicle.

Using this manual

■ This manual describes all options

and features available for this

model. Certain descriptions,

including those for display and

menu functions, may not apply to

your vehicle due to model variant,

country specifications, special

equipment or accessories.

■ The "In brief" section will give you

an initial overview.

■ The table of contents at the

beginning of this manual and within

each section shows where the

information is located.

■ The index will enable you to search

for specific information.

■ This Owner's Manual depicts left-

hand drive vehicles. Operation is

similar for right-hand drive vehicles.

■ The Owner's Manual uses the

factory engine designations. The

corresponding sales designations

can be found in the section

"Technical data".

■ Directional data, e.g. left or right, or

front or back, always relate to the

direction of travel.

■ The vehicle display screens may

not support your specific language.

■ Display messages and interior

labelling are written in bold letters.

Danger, Warnings and

Cautions

9 Danger

Text marked 9 Danger provides

information on risk of fatal injury.

Disregarding this information may

endanger life.

4 Introduction

9 Warning

Text marked 9 Warning provides

information on risk of accident or

injury. Disregarding this

information may lead to injury.

Caution

Text marked Caution provides

information on possible damage to

the vehicle. Disregarding this

information may lead to vehicle

damage.

Symbols

Page references are indicated with 3.

3 means "see page".

Thank you for choosing a Vauxhall.

We wish you many hours of

pleasurable driving.

Your Vauxhall Team

Introduction 5

6 In brief

In brief

Initial drive information

Vehicle unlocking

Unlocking with key

Turn the key in the driver's door lock

towards the front of the vehicle.

Unlocking with radio remote

control

Press button Ä to unlock the

vehicle.

Press button Å to unlock the load

compartment only.

Open the doors by pulling the

handles. To open the tailgate, press

the button under the tailgate handle.

Radio remote control 3 20, Central

locking system 3 21, Load

compartment 3 25, Power windows

3 29.

In brief 7

Seat adjustment

Seat positioning

Pull handle, slide seat, release

handle.

Seat position 3 33, Seat adjustment

3 33.

9 Danger

Do not sit nearer than 25 cm from

the steering wheel, to permit safe

airbag deployment.

Seat backrests

Turn handwheel. Do not lean on

backrest when adjusting.

Seat position 3 33, Seat adjustment

3 33.

Seat height

Lever pumping motion

up = higher

down = lower

Operate lever and adjust body weight

on seat to raise or lower it.

Seat position 3 33, Seat adjustment

3 33.

8 In brief

Head restraint adjustment

Press release catch, adjust height,

engage.

Head restraints 3 32.

Seat belt

Pull out the seat belt and engage in

belt buckle. The seat belt must not be

twisted and must fit close against the

body. The backrest must not be tilted

back too far (maximum approx. 25 °).

To release belt, press red button on

belt buckle.

Seat position 3 33, Seat belts

3 38, Airbag system 3 41.

Mirror adjustment

Interior mirror

Adjust the lever on the underside to

reduce dazzle.

Interior mirror 3 28.

In brief 9

Exterior mirrors

Swivel lever in required direction.

Select the relevant exterior mirror by

turning the control to left _ or right 6.

Then swivel the control to adjust the

mirror.

In position o no mirror is selected.

Convex exterior mirrors 3 27,

Electric adjustment 3 27, Folding

exterior mirrors 3 28, Heated

exterior mirrors 3 28.

Steering wheel adjustment

Unlock the lever, adjust the steering

wheel, then engage lever and ensure

it is fully locked.

Do not adjust steering wheel unless

vehicle is stationary and the steering

wheel lock has been released.

Airbag system 3 41, Ignition

positions 3 102.

10 In brief

Instrument panel overview

In brief 11

1 Fixed air vents ..................... 100

2 Side air vents ........................ 99

3 Light switch .......................... 88

Turn and lane-change

signals, headlight flash,

low beam and high beam ..... 90

4 Instruments .......................... 67

Driver Information Centre ...... 79

5 Windscreen wiper,

windscreen washer

system, rear window

wiper/washer ........................ 62

Trip odometer reset ............... 67

6 Centre air vents .................... 99

7 Headlight range

adjustment ........................... 89

Driver Information Centre

controls ................................ 79

Trip computer ........................ 86

Instrument illumination .......... 91

Hazard warning flashers ....... 90

Front fog lights ..................... 90

Rear fog light ........................ 91

Heated rear window .............. 31

Heated exterior mirrors ......... 28

8 Front passenger airbag ........ 44

9 Glovebox .............................. 54

10 Climate control system .......... 95

Electronic climate control

system ................................... 97

11 Selector lever, manual

transmission ....................... 107

Manual transmission

automated ........................... 108

12 Ignition switch with

steering wheel lock ............ 102

13 Steering wheel controls ....... 61

14 Horn ..................................... 62

Driver airbag ........................ 44

15 Steering wheel adjustment ..61

16 Cruise control ..................... 115

17 Fuse box ............................. 140

18 Bonnet release lever .......... 127

Exterior lighting

Turn light switch:

= off / daytime running lights

= sidelights / headlights

Lighting 3 88, Daytime running

lights 3 89.

12 In brief

Fog lights

Press light switch:

= front fog lights

= rear fog light

Headlight flash, high beam and

low beam

headlight flash = pull lever

high beam = push lever

low beam = pull lever

High beam 3 88, Headlight flash

3 88.

Turn and lane-change signals

lever up = right turn signal

lever down = left turn signal

Turn and lane-change signals

3 90.

In brief 13

Hazard warning flashers

Operated with the ¨ button.

Hazard warning flashers 3 90.

Horn

Press j.

Washer and wiper systems

Windscreen wiper

Twist lever:

= off

= intermittent wiping

= slow

= fast

For a single wipe when the

windscreen wiper is off, move the

lever up.

Windscreen wiper 3 62, Wiper

blade replacement 3 131.

14 In brief

Windscreen and headlight

washer systems

Pull lever.

Windscreen and headlight washer

system 3 62, Washer fluid 3 129.

Rear window wiper and washer

systems

Twist band to activate the rear

window wiper.

The rear window wiper comes on

automatically when the windscreen

wiper is switched on and reverse gear

is engaged.

Push lever: Washer fluid is sprayed

on the rear window and the wiper

wipes a few times.

Rear window wiper/washer 3 63.

Climate control

Heated rear window, heated

exterior mirrors

The heating is operated by pressing

the Ü button.

Heated rear window 3 31.

In brief 15

Demisting and defrosting the

windows

Air conditioning system

Set the temperature control to

warmest level.

Set fan speed to highest level.

Set air distribution control to V.

Cooling n on.

Heated rear window Ü on.

Electronic climate control system

Press button Ê.

Temperature and air distribution are

set automatically and the fan runs at

a high speed.

To return to automatic mode: press

button n or AUTO.

Climate control system 3 95,

Electronic climate control system

3 97.

Transmission

Manual transmission

Reverse: with the vehicle stationary,

wait 3 seconds after depressing the

clutch pedal, pull up the collar on the

selector lever and engage the gear.

If the gear does not engage, set the

lever to neutral, release the clutch

pedal and depress again; then repeat

gear selection.

Manual transmission 3 107.

16 In brief

Manual transmission automated

N = neutral position

= drive position

+ = higher gear

- = lower gear

A/M = switch between automatic

and manual mode

R = reverse gear (with selector

lever lock)

Manual transmission automated

3 108.

Starting off

Check before starting-off

■ Tyre pressure and condition 3 143,

3 174.

■ Engine oil level and fluid levels

3 127.

■ All windows, mirrors, exterior

lighting and number plates are free

from dirt, snow and ice and are

operational.

■ Proper position of mirrors, seats,

and seat belts 3 27, 3 33,

3 39.

■ Brake function at low speed,

particularly if the brakes are wet.

Starting the engine

■ Turn key to position MAR

■ move the steering wheel slightly to

release the steering wheel lock

■ operate clutch and brake

■ manual transmission automated:

operate brake, the transmission

automatically shifts to N (neutral)

■ do not operate accelerator pedal

In brief 17

■ diesel engines: turn the key to

position MAR for preheating and

wait until control indicator ! goes

out

■ turn key to position AVV and

release

Starting the engine 3 102.

Stop-start system

If the vehicle is at a low speed or at a

standstill and certain conditions are

fulfilled, activate an Autostop as

follows:

■ Depress the clutch pedal

■ set the lever in neutral

■ release the clutch pedal

An Autostop is indicated when ^ is

displayed in the Driver Information

Centre 3 79.

To restart the engine, depress the

clutch pedal again.

Stop-start system 3 103.

Parking

■ Always apply the parking brake.

Activate the manual parking brake

without pressing the release button.

Apply as firmly as possible on a

downhill slope or uphill slope.

Depress foot brake at the same

time to reduce operating force.

■ Switch off the engine. Turn the

ignition key to position STOP and

remove it. Turn the steering wheel

until the steering wheel lock is felt

to engage.

■ If the vehicle is on a level surface or

uphill slope, engage first gear

before switching off the ignition. On

an uphill slope, turn the front

wheels away from the kerb.

If the vehicle is on a downhill slope,

engage reverse gear before

switching off the ignition. Turn the

front wheels towards the kerb.

■

Lock the vehicle with button e on

the radio remote control.

18 In brief

■ Do not park the vehicle on an easily

ignitable surface. The high

temperature of the exhaust system

could ignite the surface.

■ Close the windows.

■ The engine cooling fans may run

after the engine has been switched

off 3 126.

■ After running at high engine speeds

or with high engine loads, operate

the engine briefly at a low load or

run in neutral for

approx. 30 seconds before

switching off, in order to protect the

turbocharger.

Keys, locks 3 19, Laying the vehicle

up for a long period of time 3 125.

Keys, doors and windows 19

Keys, doors and

windows

Keys, locks ................................... 19

Doors ........................................... 23

Vehicle security ............................ 26

Exterior mirrors ............................ 27

Interior mirrors ............................. 28

Windows ...................................... 29

Keys, locks

Keys

Replacement keys

The key number is specified in the

Car Pass or on a detachable tag.

The key number must be quoted

when ordering replacement keys as it

is a component of the immobiliser

system.

Locks 3 155.

Lock cylinders

Designed to free-wheel if they are

forcefully rotated without the correct

key or if the correct key is not fully

inserted. To reset, turn cylinder with

the correct key until its slot is vertical,

remove key and then re-insert it. If the

cylinder still free-wheels, turn the key

through 180° and repeat operation.

Key with foldaway key section

Press button to extend. To fold the

key, first press the button.

Car Pass

The Car Pass contains security

related vehicle data and should

therefore be kept in a safe place.

When the vehicle is taken to a

workshop, this vehicle data is needed

in order to perform certain operations.

20 Keys, doors and windows

Radio remote control

Used to operate:

■ Central locking system 3 21

■ Anti-theft locking system 3 26

■ Power windows 3 29

The radio remote control has a range

of up to 5 metres. It can be restricted

by external influences. The hazard

warning flashers confirm operation.

Handle with care, protect from

moisture and high temperatures and

avoid unnecessary operation.

Fault

If the central locking system cannot

be operated with the radio remote

control, it may be due to the following:

■ Range exceeded

■ Battery voltage too low

■ Frequent, repeated operation of the

radio remote control while not in

range

■ Overload of the central locking

system by operating at frequent

intervals, the power supply is

interrupted for a short time

■ Interference from higher-power

radio waves from other sources

Unlocking 3 21.

Radio remote control battery

replacement

Replace the battery as soon as the

range reduces.

Batteries do not belong in household

waste. They must be disposed of at

an appropriate recycling collection

point.

Key with foldaway key section

Extend the key and remove the

battery holder by undoing the screw

with a suitable screwdriver. Remove

the battery holder from the key and

Keys, doors and windows 21

replace the battery (type CR 2032),

paying attention to the installation

position.

Refit the battery holder in the key and

secure the screw.

Central locking system

Unlocks and locks the front doors,

sliding side doors and load

compartment.

A pull on an interior door handle

unlocks and opens the respective

door.

For safety reasons, the vehicle

cannot be locked if the key is in the

ignition switch.

Unlocking

Note

In the event of an accident of a

certain severity, the vehicle unlocks

automatically.

Fuel cut-off system 3 85.

Van

Press button Ä: Front doors are

unlocked.

Press button Å: Rear doors / tailgate

and sliding side doors are unlocked.

Combi, Combo Tour

Press button Ä: All doors, including

rear doors / tailgate and sliding side

doors are unlocked.

Press button Å: Rear doors / tailgate

only are unlocked.

Note

If engaged, the anti-theft security

lock on the sliding side door remains

engaged even after unlocking the

vehicle with the remote control.

Anti-theft security lock 3 23.

Locking

Close all doors. If the doors are not

closed properly, the central locking

system will not work.

22 Keys, doors and windows

Press button e. All doors, including

rear doors / tailgate and sliding side

doors are locked.

Automatic locking

The vehicle can be configured to

automatically lock the doors when

vehicle speed exceeds 12 mph.

Driver Information Centre 3 79.

Unlocking the load

compartment from inside the

vehicle

Press button Å: The load

compartment (rear doors / tailgate

and sliding side doors) are unlocked.

When the load compartment is

locked, the LED in the button is

illuminated.

Child locks

9 Warning

Use the child locks whenever

children are occupying the rear

seats.

Using a suitable tool, turn child lock

switch on sliding side door towards

the horizontal position. The door

cannot be opened from inside.

To deactivate, turn the child lock

switch to the vertical position.

Keys, doors and windows 23

Doors

Sliding door

Pull lever on interior handle and slide

door.

Caution

Ensure the side door is fully closed

and secure before driving the

vehicle.

Central locking system 3 21.

Caution

To avoid damage, do not attempt

to operate the sliding side door

when the fuel filler flap is open.

Refuelling 3 120.

Anti-theft security lock

To prevent the sliding side door from

being opened from the outside, open

the door and engage the anti-theft

security lock.

Using a suitable tool, turn the lock

switch on the sliding side door to

locked position 1. The door cannot be

opened from outside.

The anti-theft security lock remains

engaged even after unlocking the

vehicle with the remote control.

To disengage, turn the switch to

unlocked position 2.

Rear doors

To open the left hand rear door pull

the outside handle.

24 Keys, doors and windows

The door is opened from inside the

vehicle by pressing down the interior

handle.

The right hand rear door is released

using the lever.

9 Warning

The rear lights may be obscured if

the rear doors are open and the

vehicle is parked on the roadside.

Make other road users aware of

the vehicle, by using a warning

triangle or other equipment

specified in the road traffic

regulations.

The doors are retained in the 90º

position by locking stays. To open the

doors to 180º, push the latch and

swing open to the desired position.

9 Warning

Ensure extended opening doors

are secured when fully opened.

Opened doors may slam closed

due to the force of the wind!

Always close the right hand door

before the left hand door.

Central locking system 3 21.

Keys, doors and windows 25

Load compartment

Tailgate

Opening

Press the button underneath the

moulding.

9 Danger

Do not drive with the tailgate open

or ajar, e.g. when transporting

bulky objects, since toxic exhaust

gases, which can not be seen or

smelled, could enter the vehicle.

This can cause unconsciousness

and even death.

Caution

Before opening the tailgate check

overhead obstructions, such as a

garage door, to avoid damage to

the tailgate. Always check the

moving area above and behind the

tailgate.

Note

The installation of certain heavy

accessories onto the tailgate may

affect its ability to remain open.

Closing

Use the interior handle.

Ensure tailgate is fully closed before

driving.

Central locking system 3 21.

26 Keys, doors and windows

Emergency tailgate opening from

inside the vehicle

An access hole (arrowed) enables the

tailgate latch to be released using a

suitable tool. Push lever to the right to

unlock and open the tailgate.

Vehicle security

Anti-theft locking system

9 Warning

Do not use the system if there are

people in the vehicle! The doors

cannot be unlocked from the

inside.

The system deadlocks all the doors.

All doors must be closed otherwise

the system cannot be activated.

The system is disabled automatically

on every door when:

■ unlocking the doors

■ turning the ignition switch to MAR

Activating

Press e on the radio remote control

twice.

Immobiliser

The system is part of the ignition

switch and checks whether the

vehicle is allowed to be started with

the key being used.

The immobiliser is activated

automatically after the key has been

removed from the ignition switch.

Keys, doors and windows 27

If the control indicator d illuminates

when starting, there is a fault in the

system; the engine cannot be started.

Switch off the ignition and repeat the

start attempt.

If d remains illuminated, attempt to

start the engine using the spare key

and seek the assistance of a

workshop.

Note

The immobiliser does not lock the

doors. Always lock the vehicle after

leaving it 3 21.

Control indicator d 3 78.

Exterior mirrors

Convex shape

The convex exterior mirror contains

an aspherical area and reduces blind

spots. The shape of the mirror makes

objects appear smaller, which will

affect the ability to estimate

distances.

Manual adjustment

Adjust mirrors by swivelling lever in

required direction.

The lower mirrors are not adjustable.

Electric adjustment

Select the relevant exterior mirror by

turning the control to left _ or right 6.

Then swivel the control to adjust the

mirror.

In position o no mirror is selected.

28 Keys, doors and windows

Folding

For pedestrian safety, the exterior

mirrors will swing out of their normal

mounting position if they are struck

with sufficient force. Reposition the

mirror by applying slight pressure to

the mirror housing.

Parking position

The exterior mirrors can be folded in

by pressing gently on the outer edge

of the housing, e.g. when in a

confined parking situation.

Heated mirrors

Operated by pressing the Ü button.

Heating works with the engine

running and is switched off

automatically after a short time.

Interior mirrors

Manual anti-dazzle

To reduce dazzle, adjust the lever on

the underside of the mirror housing.

Keys, doors and windows 29

Windows

Windscreen

Windscreen stickers

Do not attach stickers such as toll

road stickers or similar on the

windscreen in the area of the interior

mirror.

Manual windows

The door windows can be opened or

closed with the window winders.

Power windows

9 Warning

Take care when operating the

power windows. Risk of injury,

particularly to children.

If there are children on the rear

seats, switch on the child safety

system for the power windows.

Keep a close watch on the

windows when closing them.

Ensure that nothing becomes

trapped in them as they move.

Switch on ignition to operate power

windows.

Operate the switch for the respective

window by pushing to open or pulling

to close.

Pushing or pulling briefly: window

moves up or down in stages if the

switch is held.

Pushing or pulling firmly and then

releasing: window moves up or down

fully with safety function enabled. To

stop movement, operate the switch

once more in the same direction.

With the ignition key removed or in the

STOP position, the windows can be

operated for approx. 2 minutes and

are deactivated as soon as a door is

opened.

Safety function

If the window glass encounters

resistance during automatic closing, it

is immediately stopped and opened

again.

If the safety function is activated

five times in less than a minute, the

safety function is deactivated. The

windows will only close in stages and

not automatically.

Activate the window electronics by

opening the windows. The safety

function is restored and the windows

will operate normally.

30 Keys, doors and windows

Overload

If the windows are repeatedly

operated within short intervals, the

window operation is disabled for

some time.

Initialising the power windows

If the windows cannot be closed

automatically (e.g. after

disconnecting the vehicle battery),

activate the window electronics as

follows:

1. Close doors.

2. Switch on ignition.

3. Pull switch until the window is

closed and keep pulling for an

additional 5 seconds.

4. Repeat for each window.

Child safety system for rear

windows

Press switch , to deactivate rear

door power windows.

To activate, press , again.

Operating windows from outside

The windows can be operated

remotely from outside the vehicle

when locking or unlocking the vehicle.

Central locking system 3 21.

Press and hold the Ä button to open

windows.

Press and hold the e button to close

windows.

Release button to stop window

movement.

Keys, doors and windows 31

Rear windows

Opening rear windows

To open, move lever outwards until

the window is fully open.

To close, pull lever then push until

window is fully closed.

Heated rear window

Operated by pressing the Ü button.

Heating works with the engine

running and is switched off

automatically after a short time.

Sun visors

The sun visors can be folded down or

swivelled to the side to prevent

dazzling.

If the sun visors have integral mirrors,

the mirror covers should be closed

when driving.

A ticket holder is located on the

backside of the sun visor.

32 Seats, restraints

Seats, restraints

Head restraints ............................ 32

Front seats ................................... 33

Rear seats ................................... 36

Seat belts ..................................... 38

Airbag system .............................. 41

Child restraints ............................. 47

Head restraints

Position

9 Warning

Only drive with the head restraint

set to the proper position.

The upper edge of the head restraint

should be at upper head level. If this

is not possible for extremely tall

people, set to highest position, and

set to lowest position for small people.

Adjustment

Front head restraints, height

adjustment

Press the button, adjust height and

engage.

Seats, restraints 33

Rear head restraints, height

adjustment

Pull the head restraint upwards or

press the catch to release and push

the head restraint downwards.

Removal

Rear head restraints, removal

Press both catches, pull the head

restraint upwards and remove.

Secure the removed head restraint in

the load compartment.

Note

Approved accessories may only be

attached if the seat is not in use.

Front seats

Seat position

9 Warning

Only drive with the seat correctly

adjusted.

■

Sit with buttocks as far back against

the backrest as possible. Adjust the

distance between the seat and the

pedals so that legs are slightly

angled when pressing the pedals.

Slide the front passenger seat as

far back as possible.

■ Sit with shoulders as far back

against the backrest as possible.

Set the backrest to an angle so that

it is possible to reach the steering

wheel with arms slightly bent.

Maintain contact between

shoulders and the backrest when

turning the steering wheel. Do not

tilt the backrest too far back. We

recommend a maximum angle of

approx. 25°.

■ Adjust the steering wheel 3 61.

■ Set the seat high enough to have a

clear field of vision on all sides and

on all display instruments. There

should be at least one hand of

clearance between head and the

roof frame. Thighs should rest

lightly on the seat without pressing

into it.

■ Adjust the head restraint 3 32.

■ Adjust the height of the seat belt

3 39.

Seat adjustment

Drive only with seats and backrests

properly engaged.

34 Seats, restraints

9 Danger

Do not sit nearer than 25 cm from

the steering wheel, to permit safe

airbag deployment.

9 Warning

Never adjust seats while driving as

they could move uncontrollably.

9 Warning

Never store any objects under the

seats except in the underseat

storage compartment 3 54.

Seat positioning

Pull handle, slide seat, release

handle.

Seat backrests

Turn handwheel. Do not lean on

backrest when adjusting.

Seats, restraints 35

Seat height

Lever pumping motion

up = higher

down = lower

Operate lever and adjust body weight

on seat to raise or lower it.

Armrest

Raise or lower the armrest as

required.

Heating

Activate seat heating by pressing

button ß for the respective front seat

with the ignition on.

Activation is indicated by the LED in

the button.

Pressing button ß once more

deactivates seat heating.

Prolonged use for people with

sensitive skin is not recommended.

36 Seats, restraints

Rear seats

9 Warning

Never adjust seats while driving as

they could move uncontrollably.

Folding the seats

The load compartment area can be

increased by folding up the rear

seats.

9 Warning

When folding the seat use caution

- beware of moving parts. Ensure

the seat is secure when

completely folded.

■ Lower the head restraint and move

the seat belt to one side.

■ Remove the load compartment

cover if necessary 3 55.

■ Pull the release lever and fold down

the backrest onto the seat cushion.

■ Pull the lower strap and fold the

seat assembly forwards.

■ Secure the folded seat in the

upright position by attaching the

flexible cord located on the seat

frame, to the rear seat head

restraint.

Unfolding the seats

■ To lower the rear seat, remove the

flexible cord and lower the seat

assembly to the floor, ensuring the

rear support is located on the

anchor point and securely latched.

■ Raise the backrest and adjust the

head restraint.

■ The backrest is properly engaged

when the red mark on the release

lever is no longer visible.

Removing the seats

■ Remove the seat head restraint

3 32 and remove load

compartment cover if necessary

3 55.

Seats, restraints 37

■ With the seat folded in the upright

position, push the release lever and

remove the seat assembly.

■ Store the head restraint on the rear

of the seat frame.

Installing the seats

■ Attach the seat assembly front

supports on the anchor points.

■ Push the release lever to ensure

the seat is securely latched.

■ Remove the head restraint from the

rear of the seat frame.

■ Lower the seat assembly to the

floor, ensuring the rear support is

located on the anchor point and

securely latched.

■ Raise the backrest and replace the

head restraint.

■ The backrest is properly engaged

when the red mark on the release

lever is no longer visible.

9 Warning

When installing the seat, ensure

that the seat is properly located on

the anchor points, the locking

catches are fully engaged, and the

backrest is returned to the correct

position.

38 Seats, restraints

Seat belts

The seat belts are locked during

heavy acceleration or deceleration of

the vehicle holding the occupants in

the sitting position. Therefore the risk

of injury is considerably reduced.

9 Warning

Fasten seat belt before each trip.

In the event of an accident, people

not wearing seat belts endanger

their fellow occupants and

themselves.

Seat belts are designed to be used by

only one person at a time. Child

restraint system 3 47.

Periodically check all parts of the belt

system for damage, pollution and

proper functionality.

Have damaged components

replaced. After an accident, have the

belts and triggered belt pretensioners

replaced by a workshop.

Note

Make sure that the belts are not

damaged by shoes or sharp-edged

objects or trapped. Prevent dirt from

getting into the belt retractors.

Seat belt reminder X 3 73.

Belt force limiters

On the front seats, stress on the body

is reduced by the gradual release of

the belt during a collision.

Belt pretensioners

In the event of a head-on or rear-end

collision of a certain severity, the front

seat belts are tightened.

Warning

Incorrect handling (e.g. removal or

fitting of belts) can trigger the belt

pretensioners.

Deployment of the belt pretensioners

is indicated by continuous illumination

of control indicator v 3 73.

Triggered belt pretensioners must be

replaced by a workshop. Belt

pretensioners can only be triggered

once.

Note

Do not affix or install accessories or

other objects that may interfere with

the operation of the belt

pretensioners. Do not make any

modifications to belt pretensioner

components as this will invalidate

the approval of your vehicle.

Seats, restraints 39

Three-point seat belt

Fastening

Withdraw the belt from the retractor,

guide it untwisted across the body

and insert the latch plate into the

buckle. Tighten the lap belt regularly

whilst driving by pulling the shoulder

belt.

Seat belt reminder X 3 73.

Loose or bulky clothing prevents the

belt from fitting snugly. Do not place

objects such as handbags or mobile

phones between the belt and your

body.

9 Warning

The belt must not rest against hard

or fragile objects in the pockets of

your clothing.

Height adjustment

1. Pull belt out slightly.

2. Press button down.

3. Adjust height and engage.

40 Seats, restraints

Adjust the height so that the belt lies

across the shoulder. It must not lie

across the throat or upper arm.

Do not adjust while driving.

Removing

To release belt, press red button on

belt buckle.

Seat belts on the rear seats

The seat belt for the rear centre seat

can only be withdrawn from the

retractor if the backrest is in the rear

position.

Using the seat belt while

pregnant

9 Warning

The lap belt must be positioned as

low as possible across the pelvis

to prevent pressure on the

abdomen.

Seats, restraints 41

Airbag system

The airbag system consists of a

number of individual systems

depending on the scope of

equipment.

When triggered, the airbags inflate

within milliseconds. They also deflate

so quickly that it is often unnoticeable

during the collision.

Note

Depending on the severity of a

collision, the fuel system may also

be cut-off and the engine switched

off automatically, for safety reasons.

Resetting the fuel cut-off system;

refer to "Fuel system messages"

3 85.

Note

Expiry dates for replacing the airbag

system components may be found

on the label inside the glovebox.

Contact a workshop to have the

airbag system components

replaced.

9 Warning

If handled improperly the airbag

systems can be triggered in an

explosive manner.

Note

The airbag systems and belt

pretensioner control electronics are

located in the centre console area.

Do not put any magnetic objects in

this area.

Do not fix any objects onto the airbag

covers and do not cover them with

other materials.

Each airbag is triggered only once.

Have deployed airbags replaced by

a workshop. Furthermore, it might be

necessary to have the steering

wheel, the instrument panel, parts of

the panelling, the door seals,

handles and the seats replaced.

Do not make any modifications to

the airbag system as this will

invalidate the vehicle type approval.

9 Warning

When the airbags inflate, escaping

hot gases may cause burns.

Control indicator v for airbag systems

3 73.

Fault

If there is a fault in the airbag and belt

tensioner system, the control

indicator v illuminates in the

instrument cluster. The system is not

operational.

Have the cause of the fault remedied

by a workshop.

Control indicator v 3 73.

Child restraint systems on front

passenger seat with airbag

systems

Warning according to ECE R94.02:

42 Seats, restraints

EN: NEVER use a rear-facing child

restraint system on a seat protected

by an ACTIVE AIRBAG in front of it,

DEATH or SERIOUS INJURY to the

CHILD can occur.

DE: Nach hinten gerichtete

Kindersitze NIEMALS auf einem Sitz

verwenden, der durch einen davor

befindlichen AKTIVEN AIRBAG

geschützt ist, da dies den TOD oder

SCHWERE VERLETZUNGEN DES

KINDES zur Folge haben kann.

FR: NE JAMAIS utiliser un siège

d'enfant orienté vers l'arrière sur un

siège protégé par un COUSSIN

GONFLABLE ACTIF placé devant lui,

sous peine d'infliger des

BLESSURES GRAVES, voire

MORTELLES à l'ENFANT.

ES: NUNCA utilice un sistema de

retención infantil orientado hacia

atrás en un asiento protegido por un

AIRBAG FRONTAL ACTIVO. Peligro

de MUERTE o LESIONES GRAVES

para el NIÑO.

RU: ЗАПРЕЩАЕТСЯ

устанавливать детское

удерживающее устройство лицом

назад на сиденье автомобиля,

оборудованном фронтальной

подушкой безопасности, если

ПОДУШКА НЕ ОТКЛЮЧЕНА! Это

может привести к СМЕРТИ или

СЕРЬЕЗНЫМ ТРАВМАМ

РЕБЕНКА.

NL: Gebruik NOOIT een achterwaarts

gericht kinderzitje op een stoel met

een ACTIEVE AIRBAG ervoor, om

DODELIJK of ERNSTIG LETSEL van

het KIND te voorkomen.

DA: Brug ALDRIG en bagudvendt

autostol på et forsæde med AKTIV

AIRBAG, BARNET kan komme i

LIVSFARE eller komme ALVORLIGT

TIL SKADE.

SV: Använd ALDRIG en bakåtvänd

barnstol på ett säte som skyddas med

en framförvarande AKTIV AIRBAG.

DÖDSFALL eller ALLVARLIGA

SKADOR kan drabba BARNET.

FI: ÄLÄ KOSKAAN sijoita taaksepäin

suunnattua lasten turvaistuinta

istuimelle, jonka edessä on

AKTIIVINEN TURVATYYNY, LAPSI

VOI KUOLLA tai VAMMAUTUA

VAKAVASTI.

NO: Bakovervendt

barnesikringsutstyr må ALDRI brukes

på et sete med AKTIV

KOLLISJONSPUTE foran, da det kan

føre til at BARNET utsettes for

LIVSFARE og fare for ALVORLIGE

SKADER.

PT: NUNCA use um sistema de

retenção para crianças voltado para

trás num banco protegido com um

AIRBAG ACTIVO na frente do

Seats, restraints 43

mesmo, poderá ocorrer a PERDA DE

VIDA ou FERIMENTOS GRAVES na

CRIANÇA.

IT: Non usare mai un sistema di

sicurezza per bambini rivolto

all'indietro su un sedile protetto da

AIRBAG ATTIVO di fronte ad esso:

pericolo di MORTE o LESIONI

GRAVI per il BAMBINO!

EL: ΠΟΤΕ μη χρησιμοποιείτε παιδικό

κάθισμα ασφαλείας με φορά προς τα

πίσω σε κάθισμα που προστατεύεται

από μετωπικό ΕΝΕΡΓΟ ΑΕΡΟΣΑΚΟ,

διότι το παιδί μπορεί να υποστεί

ΘΑΝΑΣΙΜΟ ή ΣΟΒΑΡΟ

ΤΡΑΥΜΑΤΙΣΜΟ.

PL: NIE WOLNO montować fotelika

dziecięcego zwróconego tyłem do

kierunku jazdy na fotelu, przed

którym znajduje się WŁĄCZONA

PODUSZKA POWIETRZNA.

Niezastosowanie się do tego

zalecenia może być przyczyną

ŚMIERCI lub POWAŻNYCH

OBRAŻEŃ u DZIECKA.

TR: Arkaya bakan bir çocuk emniyet

sistemini KESİNLİKLE önünde bir

AKTİF HAVA YASTIĞI ile

korunmakta olan bir koltukta

kullanmayınız. ÇOCUK ÖLEBİLİR

veya AĞIR ŞEKİLDE

YARALANABİLİR.

UK: НІКОЛИ не використовуйте

систему безпеки для дітей, що

встановлюється обличчям назад,

на сидінні з УВІМКНЕНОЮ

ПОДУШКОЮ БЕЗПЕКИ, інакше це

може призвести до СМЕРТІ чи

СЕРЙОЗНОГО ТРАВМУВАННЯ

ДИТИНИ.

HU: SOHA ne használjon hátrafelé

néző biztonsági gyerekülést előlről

AKTÍV LÉGZSÁKKAL védett ülésen,

mert a GYERMEK HALÁLÁT vagy

KOMOLY SÉRÜLÉSÉT okozhatja.

HR: NIKADA nemojte koristiti sustav

zadržavanja za djecu okrenut prema

natrag na sjedalu s AKTIVNIM

ZRAČNIM JASTUKOM ispred njega,

to bi moglo dovesti do SMRTI ili

OZBILJNJIH OZLJEDA za DIJETE.

SL: NIKOLI ne nameščajte otroškega

varnostnega sedeža, obrnjenega v

nasprotni smeri vožnje, na sedež z

AKTIVNO ČELNO ZRAČNO

BLAZINO, saj pri tem obstaja

nevarnost RESNIH ali SMRTNIH

POŠKODB za OTROKA.

SR: NIKADA ne koristiti bezbednosni

sistem za decu u kome su deca

okrenuta unazad na sedištu sa

AKTIVNIM VAZDUŠNIM

JASTUKOM ispred sedišta zato što

DETE može da NASTRADA ili da se

TEŠKO POVREDI.

MK: НИКОГАШ не користете детско

седиште свртено наназад на

седиште заштитено со АКТИВНО

ВОЗДУШНО ПЕРНИЧЕ пред него,

затоа што детето може ДА ЗАГИНЕ

или да биде ТЕШКО ПОВРЕДЕНО.

BG: НИКОГА не използвайте

детска седалка, гледаща назад,

върху седалка, която е защитена

чрез АКТИВНА ВЪЗДУШНА

ВЪЗГЛАВНИЦА пред нея - може да

се стигне до СМЪРТ или

СЕРИОЗНО НАРАНЯВАНЕ на

ДЕТЕТО.

RO: Nu utilizaţi NICIODATĂ un scaun

pentru copil îndreptat spre partea din

spate a maşinii pe un scaun protejat

de un AIRBAG ACTIV în faţa sa;

44 Seats, restraints

acest lucru poate duce la DECESUL

sau VĂTĂMAREA GRAVĂ a

COPILULUI.

CS: NIKDY nepoužívejte dětský

zádržný systém instalovaný proti

směru jízdy na sedadle, které je

chráněno před sedadlem AKTIVNÍM

AIRBAGEM. Mohlo by dojít k

VÁŽNÉMU PORANĚNÍ nebo ÚMRTÍ

DÍTĚTE.

SK: NIKDY nepoužívajte detskú

sedačku otočenú vzad na sedadle

chránenom AKTÍVNYM AIRBAGOM,

pretože môže dôjsť k SMRTI alebo

VÁŽNYM ZRANENIAM DIEŤAŤA.

LT: JOKIU BŪDU nemontuokite atgal

atgręžtos vaiko tvirtinimo sistemos

sėdynėje, prieš kurią įrengta AKTYVI

ORO PAGALVĖ, nes VAIKAS GALI

ŽŪTI arba RIMTAI SUSIŽALOTI.

LV: NEKĀDĀ GADĪJUMĀ

neizmantojiet uz aizmuguri vērstu

bērnu sēdeklīti sēdvietā, kas tiek

aizsargāta ar tās priekšā uzstādītu

AKTĪVU DROŠĪBAS SPILVENU, jo

pretējā gadījumā BĒRNS var gūt

SMAGAS TRAUMAS vai IET BOJĀ.

ET: ÄRGE kasutage tahapoole

suunatud lapseturvaistet istmel, mille

ees on AKTIIVSE TURVAPADJAGA

kaitstud iste, sest see võib

põhjustada LAPSE SURMA või

TÕSISE VIGASTUSE.

Beyond the warning required by ECE

R94.02, for safety reasons never use

a forward-facing child restraint

system on the front passenger seat

with active front airbag.

9 Danger

Do not use a child restraint system

on the passenger seat with active

front airbag.

Airbag deactivation 3 45.

Front airbag system

The front airbag system consists of

one airbag in the steering wheel and

one in the instrument panel on the

front passenger side. These can be

identified by the word AIRBAG.

Additionally there is a warning label

on the passenger's sun visor.

Child restraint systems 3 47.

Airbag deactivation 3 45.

Seats, restraints 45

The front airbag system is triggered in

the event of a front-end impact of a

certain severity. The ignition must be

switched on.

The inflated airbags cushion the

impact, thereby reducing the risk of

injury to the upper body and head of

the front seat occupants

considerably.

9 Warning

Optimum protection is only

provided when the seat is in the

proper position 3 33.

Keep the area in which the airbag

inflates clear of obstructions.

Fit the seat belt correctly and

engage securely. Only then the

airbag is able to protect.

Side airbag system

The side airbag system consists of an

airbag in each front seat backrest.

This can be identified by the word

AIRBAG.

The side airbag system is triggered in

the event of a side impact of a certain

severity. The ignition must be

switched on.

The inflated airbags cushion the

impact, thereby reducing the risk of

injury to the upper body and pelvis in

the event of a side-on collision

considerably.

9 Warning

Keep the area in which the airbag

inflates clear of obstructions.

Note

Only use protective seat covers that

have been approved for the vehicle.

Be careful not to cover the airbags.

Airbag deactivation

The front passenger airbag system

must be deactivated if a child restraint

system is to be fitted on this seat.

The side airbag systems, the belt

pretensioners and all driver airbag

systems will remain active.

The front passenger airbag system

can be deactivated via the settings

menu in the Driver Information Centre

3 79.

46 Seats, restraints

Deactivate the front passenger airbag

system as follows:

1. Press the SETq button once to

access the settings menu.

2. Press SETq again (repeatedly)

to cycle through the menu

functions until menu option Pass

bag (in Standard version)

- or -

Passenger bag (in Multifunction

version)

is displayed.

3. Press the R or S button to switch

from Pass bag On to Pass bag

off (Standard version)

- or -

from Passenger bag On to

Passenger bag Off (Multifunction

version)

4. Press SETq to confirm selection;

A confirmation message appears

in the display.

5. Press the R or S button to select

Yes.

6. Press SETq briefly to confirm

deactivation and automatically

return to the previous display

screen.

Front passenger seat airbags are

deactivated and will not inflate in the

event of a collision. Control indicator

* illuminates continuously in the

instrument cluster. A child restraint

system can be installed in

accordance with the chart Child

restraint installation locations 3 49.

9 Danger

Risk of fatal injury for a child using

a child restraint system on a seat

with activated front passenger

airbag.

Risk of fatal injury for an adult

person on a seat with deactivated

front passenger airbag.

As long as the control indicator * is

not illuminated, the front passenger

airbag system will inflate in the event

of a collision.

If control indicators * and v are

illuminated at the same time, there is

a system failure. The status of the

system is not discernible, therefore

no person is allowed to occupy the

front passenger seat. Contact a

workshop immediately.

Change status only when the vehicle

is stationary with the ignition off. The

status remains until the next change.

Control indicator for airbag

deactivation 3 74.

Seats, restraints 47

Reactivating front passenger airbag

system - see Driver Information

Centre 3 79.

Child restraints

Child restraint systems

We recommend the Vauxhall child

restraint system which is tailored

specifically to the vehicle.

When a child restraint system is being

used, pay attention to the following

usage and installation instructions

and also those supplied with the child

restraint system.

Always comply with local or national

regulations. In some countries, the

use of child restraint systems is

forbidden on certain seats.

9 Warning

When using a child restraint

system on the front passenger

seat, the airbag systems for the

front passenger seat must be

deactivated; if not, the triggering of

the airbags poses a risk of fatal

injury to the child.

This is especially the case if rear-

facing child restraint systems are

used on the front passenger seat.

Selecting the right system

The rear seats are the most

convenient location to fasten a child

restraint system.

Children should travel facing

rearwards in the vehicle as long as

possible. This makes sure that the

child's backbone, which is still very

weak, is under less strain in the event

of an accident.

Suitable restraint systems comply

with ECE 44-03 or ECE 44-04. Check

local laws and regulations for

mandatory use of child restraint

systems.

Ensure that the child restraint system

to be installed is compatible with the

vehicle type.

Ensure that the mounting location of

the child restraint system within the

vehicle is correct.

48 Seats, restraints

Allow children to enter and exit the

vehicle only on the side facing away

from the traffic.

When the child restraint system is not

in use, secure the seat with a seat belt

or remove it from the vehicle.

Note

Do not stick anything on the child

restraint systems and do not cover

them with any other materials.

A child restraint system which has

been subjected to stress in an

accident must be replaced.

Seats, restraints 49

Child restraint installation locations

Permissible options for fitting a child restraint system

Weight and age class

Front passenger seat Second row Third row

activated airbag deactivated airbag outboard seat centre seat

Group 0: up to 10 kg

or approx. 10 months

U, <

U X

Group 0+: up to 13 kg

or approx. 2 years

U, <

U X

Group I: 9 to 18 kg

or approx. 8 months to 4 years

U, <

U X

Group II: 15 to 25 kg

or approx. 3 to 7 years

X X U U X

Group III: 22 to 36 kg

or approx. 6 to 12 years

X X U U X

= Only if front airbag system is deactivated. When securing with a three-point seat belt, move seat height adjustment

to uppermost position and ensure that the seat belt runs forwards from the upper anchorage point. Adjust seat

backrest inclination as far as necessary to a vertical position to ensure that the belt is tight on the buckle side.

= Vehicle seat available with ISOFIX attachments. When attaching using ISOFIX, only the ISOFIX child restraint

systems permitted for the vehicle may be used.

U = Universal suitability in conjunction with three-point seat belt.

X = No child restraint system permitted in this weight class.

50 Seats, restraints

Permissible options for fitting an ISOFIX child restraint system

Weight class Size class Fixture

On front passenger

seat

On outboard seats

in the second row

On centre seat in

the second row

On the seats in

the third row

Group 0: up to 10 kg E ISO/R1 X IL X X

Group 0+: up to 13 kg E ISO/R1 X IL X X

D ISO/R2 X IL X X

C ISO/R3 X

X X

Group I: 9 to 18 kg D ISO/R2 X IL X X

C ISO/R3 X

X X

B ISO/F2 X IUF X X

B1 ISO/F2X X IUF X X

A ISO/F3 X IUF X X

IL = Suitable for particular ISOFIX restraint systems of the 'specific-vehicle', 'restricted' or 'semi-universal' categories.

The ISOFIX restraint system must be approved for the specific vehicle type.

IUF = Suitable for ISOFIX forward-facing child restraint systems of universal category approved for use in this weight class.

X = No ISOFIX child restraint system approved in this weight class.

The Isofix child seat can be installed by lifting the head restraint all the way up.

Seats, restraints 51

ISOFIX size class and seat device

A – ISO/F3 = Forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg.

B – ISO/F2 = Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg.

B1 – ISO/F2X = Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg.

C – ISO/R3 = Rear-facing child restraint system for children of maximum size in the weight class up to 18 kg.

D – ISO/R2 = Rear-facing child restraint system for smaller children in the weight class up to 18 kg.

E – ISO/R1 = Rear-facing child restraint system for young children in the weight class up to 13 kg.

52 Seats, restraints

ISOFIX child restraint

systems

Fasten vehicle-approved ISOFIX

child restraint systems to the ISOFIX

mounting brackets. Specific vehicle

ISOFIX child restraint system

positions are marked in the table by

IL.

ISOFIX mounting brackets are

indicated by a label on the backrest.

Before fastening a child seat adjust

the head restraint to use position

3 32.

Top-tether fastening eyes

In addition to the ISOFIX mounting,

fasten the Top-Tether strap to the

Top-Tether fastening eyes. The strap

must run between the two guide rods

of the head restraint.

ISOFIX child restraint systems of

universal category positions are

marked in the table by IUF.

Storage 53

Storage

Storage compartments ................ 53

Load compartment ....................... 55

Roof rack system ......................... 58

Loading information ..................... 59

Storage compartments

9 Warning

Do not store heavy or sharp

objects in the storage

compartments. Otherwise vehicle

occupants could be injured by

objects being thrown around in the

event of hard braking, a sudden

change in direction or an accident.

Instrument panel storage

Storage compartments are located in

the instrument panel.

Document holder

Pull the rear of the document holder

upwards from the instrument panel

and rest in tilted position.

To fold away, lower the document

holder back into the instrument panel,

pressing down until it engages

audibly.

54 Storage

Glovebox

Pull lever to open the glovebox cover.

Depending on version, the glovebox

may be lockable.

The glovebox should be closed whilst

driving.

Cupholders

Cupholders are located in the console

between the front seats.

The cupholders can also be used to

hold the portable ashtray unit 3 67.

Overhead console

Store only lightweight items such as

paperwork or maps in the overhead

console.

Underseat storage

Pull the loop on the seat cushion to

gain access to the storage area.

Storage 55

Load compartment

Folding down rear seat

backrests

The rear seat backrest is divided into

two parts. Both parts can be folded

down.

Remove the load compartment cover

if necessary.

Press and hold the catch, then push

the head restraints down.

Pull the release lever on one or both

sides and fold down the backrests

onto the seat cushion.

Pull lever to release, the seat base is

tensioned and will start to rise

automatically.

Fold the seat forward completely.

To fold up, lower seats to the floor

until they engage audibly. Raise

backrests and guide them into an

upright position until they engage

audibly.

The backrests are properly engaged

when both red marks on the release

levers are no longer visible.

Ensure that the seat belts are

positioned correctly before returning

the seats to the upright position.

9 Warning

Only drive the vehicle if the

backrests are securely locked into

position. Otherwise there is a risk

of personal injury or damage to the

load or vehicle in the event of

heavy braking or a collision.

Load compartment cover

Extendable load compartment

cover

Do not place any heavy or sharp-

edged objects on the extendable load

compartment cover.

56 Storage

Closing

Pull the cover towards the rear using

the handle and engage it in the

retainers at the sides.

Opening

Remove load compartment cover

from the retainers at the sides. Hold

the cover and guide it until it is fully

rolled up.

Removing

Open the load compartment cover.

Pull the release lever and lift cover

from retainers.

Installing

Insert either side of the load

compartment cover in the recess, pull

the release lever. Insert the load

compartment cover and engage.

Storage 57

Rear parcel shelf

The rear parcel shelf consists of two

parts - a front part and rear part. The

front part can be opened or closed,

allowing for greater flexibility in the

load compartment.

Do not place any excessively heavy

or sharp-edged objects on the rear

parcel shelf.

9 Warning

Always make sure that the load in

the vehicle is securely stowed.

Otherwise objects can be thrown

around inside the vehicle and

cause personal injury or damage

to the load or car.

The rear parcel shelf can be installed

in 2 positions, i.e. the upper position

or the lower position. In the lower

position, the maximum load

permissible is 70 kg.

Removing

If the rear seats are in the folded

position, remove the parcel shelf and

store it horizontally between the back

of the front seats and the folded rear

seats.

Caution

For safety reasons, do not place

loads on the folded rear seats.

58 Storage

To remove, lift the front part of the

parcel shelf by releasing it from the

front retainers (1) on both sides.

Lift the rear part of the parcel shelf by

releasing it from the rear retainers (2

and 3) on both sides.

Installing

Refit the parcel shelf by engaging in

front and rear retainers on both sides.

Lashing eyes

Van

The lashing eyes are designed to

secure items against slippage, e.g.

using lashing straps or a luggage net.

Combo Tour

Roof rack system

Roof rack

For safety reasons and to avoid

damage to the roof, the vehicle

approved roof rack system is

recommended. Contact a workshop

for further information.

Follow the installation instructions

and remove the roof rack when not in

use.

Mounting roof rack

Storage 59

To fasten a roof rack, insert the

mounting bolts in the holes indicated

in the illustration.

Loading information

■ Heavy objects in the load

compartment should be evenly

distributed and placed as far

forward as possible. If objects can

be stacked, the heavier objects

should be placed at the bottom.

■ Secure objects with lashing straps

attached to lashing eyes 3 58.

■ Secure loose objects in load

compartment to prevent them from

sliding.

■ When transporting objects in the

load compartment, the backrests of

the rear seats must not be tilted

forwards or folded down.

■ Do not allow the load to protrude

above the upper edge of the

backrests.

■ Do not place any objects on the

extendable load compartment

cover 3 55 or the instrument panel,

and do not cover the sensor on top

of the instrument panel 3 97.

■ The load must not obstruct the

operation of the pedals, parking

brake and gear selector, or hinder

the freedom of movement of the

driver. Do not place any unsecured

objects in the interior.

■ Do not drive with an open load

compartment.

9 Warning

Always make sure that the load in

the vehicle is securely stowed.

Otherwise objects can be thrown

around inside the vehicle and

cause personal injury or damage

to the load or car.

■ The payload is the difference

between the permitted gross

vehicle weight (see identification

plate 3 161) and the EC kerb

weight.

To calculate the payload, enter the

data for your vehicle in the Weights

table at the front of this manual.

The EC kerb weight includes

weights for the driver (68 kg),

60 Storage

luggage (7 kg) and all fluids (tank

90 % full).

Optional equipment and

accessories increase the kerb

weight.

■ Driving with a roof load increases

the sensitivity of the vehicle to

cross-winds and has a detrimental

effect on vehicle handling due to

the vehicle's higher centre of

gravity. Distribute the load evenly

and secure it properly with retaining

straps. Adjust the tyre pressure and

vehicle speed according to the load

conditions. Check and retighten the

straps frequently.

Do not drive faster than 75 mph.

The permissible roof load (which

includes the weight of the roof rack)

is 100 kg. The roof load is the

combined weight of the roof rack

and the load.

Instruments and controls 61

Instruments and

controls

Controls ....................................... 61

Warning lights, gauges and indi‐

cators ........................................... 67

Information displays ..................... 79

Vehicle messages ........................ 85

Trip computer ............................... 86

Controls

Steering wheel adjustment

Unlock lever, adjust steering wheel,

then engage lever and ensure it is

fully locked.

Do not adjust steering wheel unless

vehicle is stationary and steering

wheel lock has been released.

Steering wheel controls

The Infotainment system and a

connected mobile phone can be

operated via the controls on the

steering wheel.

Further information is available in the

Infotainment system manual.

62 Instruments and controls

Horn

Press j.

Windscreen wiper/washer

Windscreen wiper

Twist lever:

= off

= intermittent wiping

= slow

= fast

For a single wipe when the

windscreen wiper is off, move the

lever up.

Do not use if the windscreen is frozen.

Switch off in car washes.

Adjustable wiper interval

Wiper lever in position Ç.

The windscreen wiper will

automatically adapt to the speed of

the vehicle.

Windscreen washer

Pull lever briefly, washer fluid is

sprayed onto the windscreen and the

wiper wipes a few times.

Pull lever and hold, washer fluid is

sprayed onto the windscreen and

wiper wipes until the lever is released.

Washer fluid 3 129, Wiper blade

replacement 3 131.

Instruments and controls 63

Rear window wiper/washer

Twist to activate the rear window

wiper.

Push lever. Washer fluid is sprayed

onto the rear window and the wiper

wipes a few times.

Do not use if the rear window is

frozen.

Switch off in car washes.

The rear window wiper comes on

automatically when the windscreen

wiper is switched on and reverse gear

is engaged.

Outside temperature

Outside temperature is shown in the

Driver Information Centre 3 79.

9 Warning

The road surface may already be

icy even though the display

indicates a few degrees above

0 °C.

Clock

Depending on model variant, the

current time and/or date may appear

in the Driver Information Centre

3 79.

Values can be adjusted via the

SETq, R and S buttons on the

instrument panel.

64 Instruments and controls

Set time in Driver Information

Centre - Standard version

1. Press the SETq button once to

access the settings menu.

2. Scroll through the menu options

using the R or S buttons

until HOUR is displayed.

3. Press SETq to access this menu

option; the hours will flash in the

display.

4. Press R or S to increase or

decrease the displayed value.

5. Press SETq to confirm changes;

the minutes will flash in the

display.

6. Press R or S to increase or

decrease the displayed value.

7. Press SETq briefly to confirm

changes and automatically return

to the previous display screen.

Set time and date in Driver

Information Centre -

Multifunction version

Setting the time

After accessing this menu option, it is

possible to either set the time or

change the clock mode between

12 hour and 24 hour clock.

Press the SETq button once to

access the settings menu.

Scroll through the menu options using

the R or S buttons until Set time is

displayed.

Press SETq to access this menu

option; Time and Mode are displayed.

To set the time:

1. Press R or S to select Time and

press SETq to access this

submenu option; the hours will

flash in the display

2. Press R or S to increase or

decrease the displayed value.

3. Press SETq to confirm changes;

the minutes will flash in the

display.

Instruments and controls 65

4. Press R or S to increase or

decrease the displayed value.

5. Press SETq briefly to confirm

changes and automatically return

to the previous display screen.

To change the clock mode between

12 hour and 24 hour clock:

1. Press R or S to select Mode and

press SETq to access this

submenu option; the display will

flash.

2. Press R or S to change clock

mode between 12h and 24h.

3. Press SETq briefly to confirm

changes and automatically return

to the previous display screen.

Setting the date

1. Press the SETq button once to

access the settings menu.

2. Scroll through the menu options

using the R or S buttons until Set

date is displayed.

3. Press SETq to access this menu

option; the year will flash in the

display.

4. Press R or S to increase or

decrease the displayed value.

5. Press SETq to confirm changes;

the month will flash in the display.

6. Press R or S to increase or

decrease the displayed value.

7. Press SETq to confirm changes;

the day will flash in the display.

8. Press R or S to increase or

decrease the displayed value.

9. Press SETq briefly to confirm

changes and automatically return

to the previous display screen.

Power outlets

A 12 Volt power outlet is located in the

centre console.

Rear power outlets

Depending on model variant,12 Volt

power outlets are located at the

sidewall in the load compartment.

66 Instruments and controls

Short wheelbase van

Long wheelbase van

Combo Tour

Do not exceed the maximum power

consumption of 180 watts.

With ignition off, the power outlets are

deactivated. Additionally the power

outlets are deactivated in the event of

low battery voltage.

Electrical accessories that are

connected must comply with the

electromagnetic compatibility

requirements laid down in

DIN VDE 40 839.

Do not connect any current-delivering

accessories, e.g. electrical charging

devices or batteries.

Do not damage the power outlets by

using unsuitable plugs.

If the tyre repair kit is in operation,

switch off all electrical consumers.

Tyre repair kit 3 145.

Cigarette lighter

The cigarette lighter is located in the

centre console.

Press in cigarette lighter. It switches

off automatically once the element is

glowing. Pull out lighter.

Instruments and controls 67

Ashtrays

Caution

To be used only for ash and not for

combustible rubbish.

The portable ashtray should be

placed in the cupholders in the centre

console.

Warning lights, gauges

and indicators

Instrument cluster

The needles of the instruments briefly

rotate to the end position when the

ignition is switched on.

Speedometer

Indicates vehicle speed.

Odometer

Displays the recorded distance in

miles.

H may appear in the display until the

vehicle has travelled 60 miles.

Trip odometer

Displays the recorded distance since

the last reset.

Depending on model variant, there

are two independent trip odometers

A or B which indicate how far the

vehicle has been driven since the last

reset.

68 Instruments and controls

To reset the trip odometer, press and

hold the TRIP button for a few

seconds while the relevant trip

odometer is displayed.

Tachometer

Displays the engine speed.

Drive in a low engine speed range for

each gear as much as possible.

Caution

If the needle is in the red warning

zone, the maximum permitted

engine speed is exceeded. Engine

at risk.

Fuel gauge

Displays the fuel level or gas level in

the tank depending on the operation

mode.

During natural gas operation, the

system automatically switches over to

petrol operation when the gas tanks

are empty 3 69. Fuel selector

3 119.

Control indicator $ illuminates if the

level in the tank is low.

Never run the tank dry.

Because of the fuel remaining in the

tank, the top-up quantity may be less

than the specified tank capacity.

The needle will point to 0 and control

indicator $ will flash to indicate a fault

in the system. Seek the assistance of

a workshop.

Low fuel control indicator $ 3 78.

Instruments and controls 69

CNG fuel gauge

In natural gas operation mode, the

four vertical bars next to CNG

correspond to the methane level in

the cylinders. As the fuel level

diminishes, the bars in the CNG fuel

gauge disappear.

CNG and the one remaining bar will

flash if the methane level in the

cylinders is low.

Refuelling 3 120.

Fuel selector

Pressing button Y in the centre

console switches between petrol and

natural gas operation. The LED 1

status shows the current operating

mode.

1 off = natural gas

operation.

1 illumi‐

nates

= petrol operation.

During natural gas operation, if

control indicator Y illuminates in the

Driver Information Centre (DIC)

3 79, the natural gas tanks are

empty and petrol operation is

automatically engaged.

Fuel for natural gas operation 3 119,

Refuelling 3 120.

Engine coolant

temperature gauge

Displays the coolant temperature.

70 Instruments and controls

C = engine operating

temperature not yet

reached

central

area

= normal operating

temperature

H = temperature too high

If control indicator $ illuminates in

conjunction with a message in the

Driver Information Centre 3 79 the

coolant temperature is too high. Seek

the assistance of a workshop.

Caution

If engine coolant temperature is

too high, stop vehicle, switch off

engine. Danger to engine. Check

coolant level.

Service display

Service display is available in

vehicles with Multifunction version of

the Driver Information Centre 3 79.

When the ignition is switched on, the

remaining distance before the next

service is due is shown briefly. Based

on driving conditions, the interval at

which a service will be indicated can

vary considerably.

When the remaining distance before

the next service is less than

1,250 miles, Serv. appears in the

Driver Information Centre. The

service reminder is repeated after

every additional 125 miles and

becomes more frequent when the

remaining distance is below

125 miles.

The vehicle needs a service. Seek the

assistance of a workshop.

The remaining distance to the next

service may also be viewed in the

Driver Information Centre by

selecting SERVICE from the settings

menu options 3 79.

Resetting the service display

After a service, the service display

must be reset by a workshop.

Control indicators

The control indicators described are

not present in all vehicles. The

description applies to all instrument

versions. Depending on the

equipment, the position of the control

indicators may vary.

When the ignition is switched on,

most control indicators will illuminate

briefly as a functionality test.

Instruments and controls 71

The control indicator colours mean:

red = danger, important

reminder

yellow = warning, information, fault

green = confirmation of activation

blue = confirmation of activation

72 Instruments and controls

Control indicators in the instrument cluster

Instruments and controls 73

Generic warning

9 illuminates yellow.

Depending on model variant, control

indicator 9 may illuminate

independently or in conjunction with

Æ, t, Z or r.

If 9 illuminates together with I; stop

engine immediately and seek the

assistance of a workshop.

Simultaneously a warning message

may be displayed in the Driver

Information Centre 3 79.

9 also illuminates if the fuel cut-off

switch is triggered, or if a fault is

detected in the engine oil pressure

sensor. Consult a workshop.

Fuel cut-off system 3 85.

Turn signal

2 or 3 flashes green.

Flashes

A turn signal or the hazard warning

flashers are activated.

Rapid flashing: failure of a turn signal

light or associated fuse, failure of turn

signal light on trailer.

Bulb replacement 3 132, Fuses

3 138.

Turn signals 3 90.

Seat belt reminder

Seat belt reminder for front

seats

X for driver's seat and/or front

passenger seat illuminates or flashes

red.

Illuminates

When the ignition has been switched

on, control indicator X illuminates

briefly if driver's seat belt and/or front

passenger seat belt is not engaged. A

warning chime also sounds for a few

seconds.

Flashes

During driving X will flash and a

warning chime will sound for

90 seconds until the front seat belts

are fastened.

Fastening the seat belt 3 39.

9 Warning

Fasten seat belt before each trip.

In the event of an accident, people

not wearing seat belts endanger

their fellow occupants and

themselves.

To deactivate the seat belt reminder,

consult a workshop. Reactivation of

the warning chime for seat belt

reminder can be done via the Driver

Information Centre 3 79.

Note

The volume of the warning chime

can also be adjusted via the Driver

Information Centre 3 79.

Airbag and belt tensioners

v illuminates red.

When the ignition is switched on, the

control indicator illuminates for

approx. 4 seconds. If it does not

illuminate, does not go out after

4 seconds or illuminates whilst

driving, there is a fault in the airbag

74 Instruments and controls

system. Seek the assistance of a

workshop. The airbags and belt

pretensioners may fail to trigger in the

event of an accident.

Deployment of the belt pretensioners

or airbags is indicated by continuous

illumination of v.

9 Warning

Have the cause of the fault

remedied immediately by a

workshop.

Belt pretensioners, airbag system

3 38, 3 41.

Airbag deactivation

* illuminates yellow.

With the front passenger airbag

activated:

When the ignition is switched on, *

illuminates for approx. 4 seconds,

flashes for another 4 seconds and

then extinguishes.

With the front passenger airbag

deactivated:

permanently illuminates yellow.

Airbag deactivation 3 45.

9 Danger

Risk of fatal injury for a child using

a child restraint system together

with activated front passenger

airbag.

Risk of fatal injury for an adult

person with deactivated front

passenger airbag.

Charging system

p illuminates red.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

Illuminates when the engine is

running

Stop, switch off engine. Battery is not

charging. Engine cooling may be

interrupted. The brake servo unit may

cease to be effective. Seek the

assistance of a workshop.

Malfunction indicator light

Z illuminates or flashes yellow.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

Illuminates when the engine is

running

Fault in the emission control system.

The permitted emission limits may be

exceeded. Seek the assistance of a

workshop immediately.

Flashes when the engine is

running

Fault that could lead to catalytic

converter damage. Ease up on the

accelerator until the flashing stops.

Seek the assistance of a workshop

immediately.

Brake system

R illuminates red.

Illuminates when the parking brake is

released if the brake fluid level is too

low 3 130.

Instruments and controls 75

9 Warning

Stop. Do not continue your

journey. Consult a workshop.

Illuminates if the brake vacuum servo

fails; the brake pedal becomes stiff

when pressed. The brake system

remains operational however,

assistance will be reduced. The

steering may also require

considerably more effort when

turning.

Illuminates after the ignition is

switched on if the parking brake is

applied 3 112.

Brake pad wear

F illuminates yellow.

The front brake pads are worn, seek

the assistance of a workshop

immediately.

Antilock brake system

(ABS)

u illuminates yellow.

Illuminates for a few seconds after the

ignition is switched on. The system is

ready for operation when the control

indicator extinguishes.

If the control indicator does not

extinguish after a few seconds, or if it

illuminates while driving, there is a

fault in the ABS. The brake system

remains operational but without ABS

regulation.

Antilock brake system 3 112.

Upshift

[ or Ò illuminates in the Driver

Information Centre 3 79 when

gearshifting is recommended to

improve fuel economy.

Hill start assist

Z illuminates yellow.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

If the control indicator does not

extinguish after a few seconds, or if it

illuminates while driving, there is a

fault in the Hill start assist. Seek the

assistance of a workshop to have the

fault remedied.

The Electronic Stability Program

(ESP) control indicator x may also

illuminate 3 76 in conjunction with

Depending on model variant, 9 will

illuminate as an alternative if control

indicator Z is not present. A warning

message may also be displayed in

the Driver Information Centre 3 79.

Generic warning 9 3 73.

Hill start assist 3 113.

Ultrasonic parking assist

r illuminates yellow.

Fault in system

Fault due to sensors that are dirty or

covered by ice or snow

76 Instruments and controls

Interference due to external sources

of ultrasound. Once the source of

interference is removed, the system

will operate normally.

Have the cause of the fault in the

system remedied by a workshop.

Depending on version, 9 will

illuminate as an alternative if control

indicator r is not present. A

warning message may also be

displayed in the Driver Information

Centre 3 79.

Generic warning 9 3 73.

Ultrasonic parking assist 3 116.

Electronic Stability

Program

x illuminates or flashes yellow.

Flashes

The system is actively engaged.

Engine output may be reduced and

the vehicle may be braked

automatically to a small degree.

Illuminates

A fault in the system is present.

Continued driving is possible. Driving

stability, however, may deteriorate

depending on road surface

conditions.

Have the cause of the fault remedied

by a workshop.

Electronic Stability Program (ESP)

3 114, Traction control system/Anti-

Slip Regulator (ASR) 3 113.

Engine coolant

temperature

$ illuminates red.

Illuminates for a few seconds after the

ignition is switched on.

If control indicator $ illuminates in

conjunction with a message in the

Driver Information Centre, the coolant

temperature is too high. Seek the

assistance of a workshop.

Driver Information Centre 3 79.

Caution

If engine coolant temperature is

too high, stop vehicle, switch off

the ignition. Danger to engine.

Check coolant level.

If the control indicator remains on,

seek the assistance of your

workshop.

Engine coolant temperature gauge

3 69.

Preheating

! illuminates yellow.

Preheating is activated. Only

activates when outside temperature

is low.

Diesel particle filter

[ illuminates yellow.

The diesel particle filter requires

cleaning.

Instruments and controls 77

Continue driving until

[ extinguishes. If possible, do not

allow engine speed to drop below

2000 rpm.

Illuminates

The diesel particle filter is full. Start

cleaning process as soon as

possible.

Diesel particle filter 3 106, Stop-start

system 3 103.

Engine oil pressure

I illuminates red.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

Illuminates when the engine is

running

Caution

Engine lubrication may be

interrupted. This may result in

damage to the engine and/or

locking of the drive wheels.

1. Depress clutch.

2. Select neutral gear (or move

selector lever to N).

3. Move out of the flow of traffic as

quickly as possible without

impeding other vehicles.

4. Switch off ignition.

9 Warning

When the engine is off,

considerably more force is needed

to brake and steer. During an

Autostop the brake servo unit will

still be operational.

Do not remove key until vehicle is

stationary, otherwise the steering

wheel lock could engage

unexpectedly.

Check oil level before seeking the

assistance of a workshop 3 127.

Change engine oil

Diesel engines with diesel

particle filter

I flashes red.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

The engine oil life monitor lets you

know when to change the oil. Control

indicator I will flash, together with a

message in the Driver Information

Centre, to indicate that engine oil life

has been diminished and the oil

needs changing.

Based on driving conditions, the

interval at which an oil change will be

indicated can vary considerably.

Depending on model variant, I may

flash in the following ways:

■ for 1 minute every 2 hours, or

■

for 3 minute cycles with I off for

intervals of 5 seconds.

78 Instruments and controls

The warning will be repeated every

time the engine is started, until the

engine oil is changed and the service

display is reset. Seek the assistance

of a workshop.

Service display 3 70.

Low engine oil level

y illuminates red.

Illuminates when the ignition is

switched on and extinguishes shortly

after the engine starts.

If the control indicator does not

extinguish after a few seconds, or if it

illuminates while driving, the engine

oil level is insufficient.

Check oil level before seeking the

assistance of a workshop 3 127.

Low fuel

$ illuminates or flashes yellow.

Illuminates for a few seconds after the

ignition is switched on.

Illuminates

Level in fuel tank is too low. Refuel

immediately 3 120.

Never run the tank dry.

Catalytic converter 3 107.

Flashes

Fault in fuel system.

Have the cause of the fault remedied

by a workshop.

Fuel gauge 3 68.

Drain fuel filter

z illuminates yellow.

Illuminates when the ignition is

switched on and goes out shortly after

the engine starts.

Illuminates when the engine is

running

Indicates the presence of water in the

diesel. Seek the assistance of a

workshop immediately.

Immobiliser

d illuminates yellow.

Fault in the immobiliser system. The

engine cannot be started.

Stop-start system

Æ illuminates yellow.

A fault is present in the system.

Have the cause of the fault remedied

by a workshop.

Depending on version, 9 will

illuminate as an alternative if control

indicator Æ is not present. A warning

message may also be displayed in

the Driver Information Centre 3 79.

Generic warning 9 3 73.

Stop-start system 3 103.

Exterior light

8 illuminates green.

The exterior lights are on 3 88.

Exterior light failure

µ illuminates yellow.

Instruments and controls 79

One or more of the exterior lights is

faulty 3 132.

Depending on version, 9 will

illuminate as an alternative if control

indicator µ is not present. A warning

message may also be displayed in

the Driver Information Centre 3 79.

Generic warning 9 3 73.

High beam

C illuminates blue.

Illuminated when high beam is on and

during headlight flash 3 88.

Fog light

> illuminates green.

The front fog lights are on 3 90.

Rear fog light

r illuminates yellow.

The rear fog light is on 3 91.

Cruise control

m illuminates green.

The system is on.

Cruise control 3 115.

Door open

\ illuminates red.

A door or the tailgate is open.

Information displays

Driver Information Centre

The Driver Information Centre is

located in the instrument cluster

between the speedometer and

tachometer. Two versions are

available; a Standard version

80 Instruments and controls

and a Multifunction version with

further adjustable settings.

Some of the displayed functions differ

when the vehicle is being driven or at

a standstill. Some options are only

available when the vehicle is being

driven.

Depending on variant, the following

items appear in the display:

■ Odometer, trip odometer 3 67

■ Clock 3 63

■ Outside temperature 3 63

■ Headlight range adjustment

3 89

■ Transmission display 3 108

■ Stop-start system indicator 3 103

■ Vehicle messages 3 85

■ Trip computer 3 86

Selecting menus and options

The menus and options can be

selected via the buttons on the

instrument panel.

Press the SETq button:

■ once to access the settings menu

■ press again to access a menu

option and submenu options

■ after changes have been made,

briefly press again to confirm a

value and automatically return to

the previous display screen

Alternatively, press and hold the

SETq button to return to the

previous display screen without

saving changes to the current menu

option.

Note

The settings menu is exited

automatically after a delay. Only

changes already confirmed by

briefly pressing the SETq button

are stored.

Instruments and controls 81

Press the R button to scroll up the

screen and the menu options or to

increase the displayed value. Press

and hold to increase value rapidly

(press again to stop on the required

value).

Press the S button to scroll down the

screen and the menu options or to

decrease the displayed value. Press

and hold to decrease value rapidly

(press again to stop on the required

value).

Settings menu options -

Standard version

The settings menu contains the

following options:

■ ILLU

■ SPEEd

■ HOUR

■ UNIT

■ bUZZ

■ BAG P

■ DRL

ILLU (Brightness of interior lighting)

When driving at night with the low

beam on, adjust the brightness of the

vehicle's interior lighting (e.g.

instrument panel, climate control

display).

SPEEd (Speed limit warning chime)

Activate or deactivate the speed limit

warning chime or change the speed

limit. Speeds between 20 and

125 mph can be stored.

When activated, the driver is alerted

with a warning chime when the set

speed limit is exceeded.

After accessing this menu option,

activate or deactivate the function

(set to On or Off) and confirm.

Press the SETq button when

activated (On) to access the current

set speed. Adjust as required and

confirm.

Warning chimes 3 85.

HOUR (Setting the clock)

Adjust the hours setting (flashing

value) and confirm. Adjust minutes

setting (flashing value) and confirm.

Clock 3 63.

UNIT (Unit of measurement)

Set the unit of measurement to km or

miles.

bUZZ (Warning chime volume)

Adjust the volume of warning chimes

and confirm. 8 volume levels are

available.

A chime is also sounded every time

the SETq, R or S button is pressed.

Warning chimes 3 85.

82 Instruments and controls

BAG P (Passenger front and side

airbags activation/deactivation)

Activate the front passenger airbags

if an adult is occupying the front

passenger seat. Deactivate airbags

when a child restraint system is

installed on this seat.

9 Danger

Risk of fatal injury for a child using

a child restraint system on a seat

with activated front passenger

airbag.

Risk of fatal injury for an adult

person on a seat with deactivated

front passenger airbag.

After accessing this menu option,

activate or deactivate the airbags

(BAG P On or BAG P Off) and

confirm; a confirmation message

appears in the display. Select YES (to

confirm changes) or No (to cancel

changes).

Airbag deactivation 3 45.

DRL (Daytime running lights)

Activate the daytime running lights to

increase visibility of the vehicle during

daylight (set to On). Deactivate when

not required (set to Off).

Daytime running lights 3 89.

Settings menu options -

Multifunction version

The settings menu contains the

following options:

■ Lighting

■ Speed beep

■ Trip B data

■ Set time

■ Set date

■ Radio info

■ Autoclose

■ Unit of measurement

■ Language

■ Warning volume

■ Button volume

■ Seat belt buzzer

■ Service

■ Passenger airbag

■ Daytime running lights

■ Exit menu

LIGHTING (Brightness of interior

lighting)

When driving at night with the low

beam on, adjust the brightness of the

vehicle's interior lighting (e.g.

instrument panel, climate control

display).

It is also possible to adjust the

brightness using the R or S buttons

without accessing the settings menu.

SPEED BEEP (Speed limit warning

chime)

Activate or deactivate the speed limit

warning chime or change the speed

limit. Speeds between 20 and

125 mph can be stored.

When activated, the driver is alerted

with a warning chime when the set

speed limit is exceeded.

After accessing this menu option,

activate or deactivate the function

(set to On or Off) and confirm.

Instruments and controls 83

Press the SETq button when

activated (On) to access the current

set speed. Adjust as required and

confirm.

Warning chimes 3 85.

TRIP B DATA

Activate or deactivate the second trip

computer (set to On or Off).

Trip B records average consumption,

distance travelled, average speed

and travel time (driving time). The

measurement can be restarted at any

time. Trip computer 3 86.

SET TIME (Setting the clock and

clock mode)

After accessing this menu option, it is

possible to either set the time or

change the clock mode between 12

hour and 24 hour clock.

Select Time and confirm. Adjust the

hours setting (flashing value) and

confirm. Adjust minutes setting

(flashing value) and confirm.

Select Mode and confirm. Select

12h or 24h and confirm.

Clock 3 63.

SET DATE

Adjust the year setting (flashing

value) and confirm. Adjust month

setting (flashing value) and confirm.

Adjust the day setting (flashing value)

and confirm.

RADIO INFO (Display audio and

radio information)

Activate radio info (set to On) to

display audio and radio information

(e.g. station frequency, RDS

messages, track number). Deactivate

when not required (set to Off).

AUTOCLOSE (Automatic central

locking when driving)

Activate the autoclose feature (set to

On) to automatically lock the doors

when vehicle speed exceeds

12 mph. Deactivate when not

required (set to Off).

UNIT OF MEASUREMENT (for

Distance, Fuel consumption and

Temperature)

After accessing this menu option, it is

possible to set the unit of

measurement for distance, fuel

consumption and temperature.

Select Distance and confirm. Set the

unit of measurement to km or mi

(miles) and confirm.

Select Consumption and confirm.

When the Distance unit is set to km, it

is possible to set the unit of

measurement for fuel consumption to

either l/100km or km/l. When the

Distance unit is set to mi (miles), fuel

consumption is shown in mpg.

Select Temperature and confirm. Set

the unit of measurement to °C or °F

and confirm.

LANGUAGE (for Display messages)

Display messages can be shown in

different languages, including:

English, German, French, Italian,

Portuguese, Spanish, Dutch, Polish

and Turkish. Select desired language

and confirm.

WARNING VOLUME (Warning chime

volume)

Adjust the volume of warning chimes

and confirm. 8 volume levels are

available.

Warning chimes 3 85.

84 Instruments and controls

BUTTON VOLUME

A chime is sounded every time the

SETq, R or S button is pressed.

Adjust the volume of these chimes

and confirm. 8 volume levels are

available.

Warning chimes 3 85.

SEAT BELT BUZZER (Reactivate

warning chime for driver and/or front

passenger seat belt reminder)

This menu option is available only

when the seat belt reminder has

already been deactivated by a

workshop.

When reactivated, the driver and/or

front passenger are alerted with a

warning chime when the

corresponding seat belt is not

fastened.

Seat belt reminder 3 73.

SERVICE (Distance to next service)

Access this menu option to view the

remaining distance to the next

service.

The distance to next service is also

displayed automatically when the

distance reaches 1,250 miles and is

repeated after every additional

125 miles.

Service display 3 70.

PASSENGER AIRBAG (Passenger

front and side airbags activation/

deactivation)

Activate the front passenger airbags

if an adult is occupying the front

passenger seat. Deactivate airbags

when a child restraint system is

installed on this seat.

9 Danger

Risk of fatal injury for a child using

a child restraint system on a seat

with activated front passenger

airbag.

Risk of fatal injury for an adult

person on a seat with deactivated

front passenger airbag.

After accessing this menu option,

activate or deactivate the airbags

(Bag Pass On or Bag Pass Off) and

confirm; a confirmation message

appears in the display. Select YES (to

confirm changes) or No (to cancel

changes).

Airbag deactivation 3 45.

DAYTIME RUNNING LIGHTS

Activate the daytime running lights to

increase visibility of the vehicle during

daylight (set to On). Deactivate when

not required (set to Off).

Daytime running lights 3 89.

EXIT MENU

Select this menu option to exit the

settings menu.

Instruments and controls 85

Vehicle messages

Warning chimes

Only one warning chime will sound at

a time.

The warning chime regarding

unfastened seat belts has priority

over any other warning chime.

When starting the engine or

whilst driving

■ If seat belt is not fastened.

■ If a certain speed is exceeded with

the parking brake applied.

■ If the parking assist detects an

object.

■ If a fault is detected in the parking

assist.

■ If a door or the tailgate is not fully

closed when starting-off.

■ If the vehicle speed briefly exceeds

a set limit.

■ Vehicles with manual transmission

automated; neutral is not selected

or the foot brake has not been

depressed.

■ If a transmission fault is detected in

vehicles with manual transmission

automated.

■ If a warning message appears in

the Driver Information Centre.

When the vehicle is parked

and/or the driver's door is

opened

■ When the key is in the ignition

switch.

■ Vehicles with manual transmission

automated; neutral is not selected,

the parking brake is not applied, or

the foot brake and/or the

accelerator pedal has not been

depressed.

Fuel system messages

Fuel cut-off system

In the event of a collision of a certain

severity, the fuel system is cut-off and

the engine is switched off

automatically, for safety reasons. A

corresponding warning message may

also appear in the Driver Information

Centre 3 79.

To reset the fuel cut-off system and

enable the vehicle to be driven, refer

to "Vehicle shutdown" 3 103.

86 Instruments and controls

Trip computer

The trip computer provides

information on driving data, which is

continually recorded and evaluated

electronically.

The following functions can be

selected by pressing the TRIP button

repeatedly on the end of the wiper

lever:

Standard version

■ Average consumption

■ Instantaneous consumption

■ Range

■ Distance travelled

■ Average speed

■ Travel time (driving time)

Multifunction version

Two trip odometers, Trip A and Trip

B, are available for selection and are

recorded separately.

The information of the two trip

computers can be reset separately,

making it possible to display different

trip distances.

Trip A

■ Average consumption

■ Instantaneous consumption

■ Range

■ Distance travelled

■ Average speed

■ Travel time (driving time)

Trip B

■ Average consumption

■ Distance travelled

■ Average speed

■ Travel time (driving time)

Trip B can be deactivated via the

Driver Information Centre 3 79.

Reset trip computer information

To reset the trip computer, select one

of its functions, then press and hold

the TRIP button for a few seconds.

The following trip computer

information will be reset:

■ Average consumption

■ Distance travelled

■ Average speed

■ Travel time (driving time)

Instruments and controls 87

The trip computer will reset

automatically when the maximum

value of any of the parameters is

exceeded.

Average consumption

Average consumption is displayed,

taking into consideration the distance

travelled and the fuel used since the

last reset.

The measurement can be restarted at

any time.

Instantaneous consumption

Display of the instantaneous fuel

consumption.

_ _ _ _ will appear in the display if the

vehicle is left parked with the engine

running for a long time.

Range

The range is calculated from the

current contents of the fuel tank and

the average consumption since the

last reset.

When the range is less than 30 miles,

_ _ _ _ will appear in the display.

After refuelling, the range is updated

automatically after a brief delay.

The measurement can be restarted at

any time.

Note

The range will not be displayed if the

vehicle is left parked with the engine

running for a long time.

Distance travelled

Displays the distance driven since the

last reset.

The measurement can be restarted at

any time.

Average speed

The average speed since the last

reset is displayed.

The measurement can be restarted at

any time.

Interruptions in the journey with the

ignition off are not included in the

calculations.

Travel time (driving time)

The time elapsed since the since the

last reset is displayed.

The measurement can be restarted at

any time.

Exit trip computer

To exit the trip computer, press and

hold the SETq button for more than

2 seconds.

Driver Information Centre 3 79.

Interruption of power supply

If the power supply has been

interrupted or if the battery voltage

has dropped too low, the values

stored in the trip computer will be lost.

88 Lighting

Lighting

Exterior lighting ............................ 88

Interior lighting ............................. 91

Lighting features .......................... 94

Exterior lighting

Light switch

Turn light switch:

= off / daytime running lights

= sidelights / headlights

Control indicator 8 3 78.

Tail lights

Tail lights are illuminated together

with headlights and sidelights.

High beam

To switch from low to high beam,

push lever.

To switch to low beam, pull lever.

Headlight flash

To activate the headlight flash, pull

lever.

Lighting 89

Headlight range

adjustment

Manual headlight range

adjustment

To adapt headlight range to the

vehicle load to prevent dazzling of

other road users: Press À or Á

buttons until the required setting is

displayed in the Driver Information

Centre 3 79.

0 = Front seats occupied

1 = All seats occupied

2 = All seats occupied and load

compartment laden

3 = Driver's seat occupied and load

compartment laden

Headlights when driving

abroad

The asymmetrical headlight beam

extends visibility at the edge of the

road at the passenger side.

However, when driving in countries

where traffic drives on the opposite

side of the road, adjust the headlights

to prevent dazzling of oncoming

traffic.

Have the headlights adjusted by a

workshop.

Daytime running lights

Daytime running lights increase

visibility of the vehicle during daylight.

When the function is activated and

the ignition is switched on, the

headlights come on automatically and

instrument illumination is subdued.

The light switch must be in position

§. The daytime running lights switch

off when the ignition is switched off.

Note

The driver remains responsible for

switching on the low beam when

required, e.g. when driving through

a tunnel or at night.

When the function is deactivated, the

headlights do not come on

automatically when the ignition is

switched on and the light switch is in

position §.

The daytime running lights function is

activated/deactivated via a menu in

the Driver Information Centre 3 79.

90 Lighting

Hazard warning flashers

Operated with the ¨ button.

Turn and lane-change

signals

Lever up = right turn signal

Lever down = left turn signal

If the lever is moved past the

resistance point, the turn signal is

switched on constantly. When the

steering wheel moves back, the turn

signal is automatically deactivated.

For five flashes, e.g. when changing

lanes, press the lever until resistance

is felt and then release.

Move the lever to the resistance point

and hold for longer indication.

Switch the indicator off manually by

moving the lever to its original

position.

Front fog lights

Operated by pressing the > button.

Switching on front fog lights will

switch sidelights on automatically.

Press the button again to turn the

front fog lights off.

Lighting 91

Rear fog lights

Operated by pressing the r button.

The rear fog light can only be

switched on when both the ignition

and headlights or sidelights (with front

fog lights) are on.

Press the button again to turn the rear

fog light off, or turn off the headlights

and/or the front fog lights.

Reversing lights

The reversing lights come on when

the ignition is on and reverse gear is

selected.

Misted light covers

The inside of the light covers may mist

up briefly in poor, wet and cold

weather conditions, in heavy rain or

after washing. The mist disappears

quickly by itself; to help, switch on the

headlights.

Interior lighting

Instrument panel

illumination control

When driving at night with the

headlights on, adjust the brightness

of the vehicle's interior lighting

(including instrument panel, climate

control display etc.) via the settings

menu of the Driver Information Centre

3 79.

To adjust brightness:

Standard version of Driver

Information Centre

1. Press the SETq button once to

access the settings menu.

2. Scroll through the menu options

using the R or S buttons until

menu option ILLU appears in the

display.

92 Lighting

3. Press the R or S button to

increase or decrease the

displayed value.

4. Press SETq briefly to confirm

changes and automatically return

to the previous display screen.

Multifunction version of Driver

Information Centre

1. Press the SETq button to access

the settings menu.

2. Scroll through the menu options

using the R or S buttons until

menu option LIGHTING appears

in the display.

3. Press the R or S button to

increase or decrease the

displayed value.

4. Press SETq briefly to confirm

changes and automatically return

to the previous display screen.

It is also possible to adjust the

brightness using the R or S buttons

without accessing the settings menu.

Driver Information Centre 3 79.

Interior lights

Depending on model variant, during

entry and exit of the vehicle the front

and rear courtesy lights come on

automatically and then switch off after

a delay.

Note

In the event of an accident of a

certain severity, the interior lights

come on automatically. Fuel cut-off

system 3 85.

Front courtesy light

Centre switch position: automatic

interior light.

To operate manually when the doors

are closed, press the lens on either

side.

Front courtesy light with reading

lights

Centre switch position: automatic

interior light.

Can be operated individually or

together with the 7 switch when the

doors are closed.

Press rocker switch 7 left or right to

operate respective reading light.

Lighting 93

Rear courtesy lights

Centre switch position: automatic

interior light.

To operate manually when the doors

are closed, press the lens on either

side.

Load compartment lighting

Depending on model variant, load

compartment lighting switches on

when the rear doors / tailgate or

sliding side door is opened.

Removable rear courtesy light

Depending on model variant, the

removable rear courtesy light may

illuminate when the rear doors /

tailgate or sliding side doors are

opened and the central switch is in the

middle position.

Switch the light on permanently by

pressing the top part of the central

switch c.

Switch the light off permanently by

pressing the bottom part of the central

switch (AUTO OFF).

To use as a handheld torch, press the

button at the top of the lamp assembly

(see illustration) to release it and pull

torch down gently to remove. Press

the switch on the end of the torch to

turn the light on/off.

Replace the torch in its original

position to recharge the battery after

use.

94 Lighting

Lighting features

Battery discharge

protection

To ensure reliable engine restarts,

several battery discharge protection

features are implemented as part of

the stop-start system.

Stop-start system 3 103.

Climate control 95

Climate control

Climate control systems ............... 95

Air vents ....................................... 99

Maintenance .............................. 100

Climate control systems

Heating and ventilation

system

Controls for:

■ Temperature

■ Fan speed

■ Air distribution

Heated rear window Ü 3 31.

Temperature

red = warm

blue = cold

Heating will not be fully effective until

the engine has reached normal

operating temperature.

Fan speed

Adjust the air flow by switching the fan

to the desired speed.

Air distribution

= to head area

= to head area and foot well

= to foot well

= to windscreen, front door

windows and foot well

= to windscreen and front door

windows

Intermediate settings are possible.

Demisting and defrosting the

windows

■ Set temperature control to warmest

level.

■ Set fan speed to highest level.

■

Set air distribution control to V.

■

Switch on heated rear window Ü.

96 Climate control

■ Open side air vents as required and

direct them towards door windows.

■ For simultaneous warming of the

foot well, set air distribution control

to J.

Air conditioning system

Additional to the heating and

ventilation system, the air

conditioning system has controls for:

= cooling

= air recirculation

Heated front seats ß 3 35.

Cooling n

Press button n to switch on cooling.

Activation is indicated by the LED in

the button. Cooling is only functional

when the engine is running and

climate control fan is switched on.

Press button n again to switch off

cooling.

The air conditioning system cools and

dehumidifies (dries) the air when

outside temperature is above a

specific level. Therefore

condensation may form and drip from

under the vehicle.

If no cooling or drying is required,

switch the cooling system off to save

fuel.

Air recirculation system

Press button 4 to activate air

recirculation mode. Activation is

indicated by the LED in the button.

Press button 4 again to deactivate

air recirculation mode.

9 Warning

The exchange of fresh air is

reduced in air recirculation mode.

In operation without cooling the air

humidity increases, so the

windows may mist up. The quality

of the passenger compartment air

deteriorates, which may cause the

vehicle occupants to feel drowsy.

In warm and very humid ambient air

conditions, the windscreen may mist

up from outside, when cold air is

directed towards it. If windscreen

mists up from outside, activate

windscreen wiper and deactivate V.

Maximum cooling

Briefly open the windows so that hot

air can disperse quickly.

■

Cooling n on.

■

Air recirculation system 4 on.

■

Set air distribution control to M.

■ Set temperature control to coldest

level.

Climate control 97

■ Set fan speed to highest level.

■ Open all air vents.

Demisting and defrosting the

windows

■ Set temperature control to warmest

level.

■ Set fan speed to highest level.

■

Set air distribution control to V.

■

Switch cooling n on.

■

Switch on heated rear window Ü.

■ Open side air vents as required and

direct them towards door windows.

■ For simultaneous warming of the

foot well, set air distribution control

to J.

Electronic climate control

system

Controls for:

■ Temperature

■ Air distribution and menu selection

■ Fan speed

AUTO = Automatic mode

= air recirculation

= demisting and defrosting

OFF = switch on/off

Heated rear window Ü 3 31.

The preselected temperature is

automatically regulated. In the

automatic mode the fan speed and air

distribution automatically regulate the

air flow.

The system can be manually adapted

by use of air distribution and air flow

controls.

The electronic climate control system

is only fully operational when the

engine is running.

For correct operation do not cover the

sensor on the instrument panel.

Automatic mode

Basic setting for maximum comfort:

■ Press AUTO button.

■ Open all air vents.

■

n on.

■ Set desired temperature.

Temperature preselection

Temperatures can be set to the

desired value.

For reasons of comfort, change

temperature only in small increments.

Turn AUTO knob to adjust.

98 Climate control

clockwise = warm

anticlockwise = cold

Heating will not be fully effective until

the engine has reached normal

operating temperature.

When the minimum temperature is

set below 16 ℃, the electronic climate

control system runs at maximum

cooling. LO appears in the display.

If the maximum temperature is set

above 32 ℃, the electronic climate

control system runs at maximum

heating. HI appears in the display.

Fan speed

The selected fan speed is indicated

with bars in the display.

Press ] or < to increase or decrease

the fan speed.

maximum fan

speed

= all bars displayed

minimum fan

speed

= one bar displayed

Press n button to deactivate fan.

To return to automatic fan speed:

Press AUTO button.

Demisting and defrosting the

windows

Press the Ê button.

Temperature and air distribution are

set automatically and the fan runs at

a high speed.

When the vehicle reaches normal

operating temperature the function

remains active for approx. 3 minutes.

To return to automatic mode: press

button n or AUTO.

Air distribution

Press R, S and 6 buttons.

LED in buttons illuminate.

Arrows shown in the display indicate

the distribution settings.

Cooling

Press button n to switch on cooling.

Activation is indicated by the LED in

the button. Cooling is only functional

when the engine is running and

climate control fan is switched on.

Press button n again to switch off

cooling.

The air conditioning system cools and

dehumidifies (dries) when outside

temperature is above a specific level.

Therefore condensation may form

and drip from under the vehicle.

If no cooling or drying is required

press n again to switch the cooling

system off, thus saving fuel.

Manual air recirculation mode

Operated with the 4 button.

recir‐

cula‐

tion on

= LED in button illuminated;

D appears in the display

recir‐

cula‐

tion off

= LED in button

extinguishes; E

appears in the display

9 Warning

The exchange of fresh air is

reduced in air recirculation mode.

In operation without cooling the air

humidity increases, so the

windows may mist up. The quality

of the passenger compartment air

deteriorates, which may cause the

vehicle occupants to feel drowsy.

Climate control 99

In warm and very humid ambient air

conditions, the windscreen may mist

up from outside, when cold air is

directed towards it. If windscreen

mists up from outside, activate

windscreen wiper and deactivate V.

Air vents

Adjustable air vents

At least one air vent must be open

while cooling is on in order to prevent

the evaporator from icing up due to

lack of air movement.

9 Warning

Do not attach any objects to the

slats of the air vents. Risk of

damage and injury in case of an

accident.

Centre air vents

Slide knob to the left to open vent.

Direct the flow of air by swivelling the

vent.

Slide knob to the right to close vent.

Side air vents

Slide knob to the left to open vent.

Direct the flow of air by swivelling the

vent.

Slide knob to the right to close vent.

100 Climate control

Fixed air vents

Additional air vents are located

beneath the windscreen and door

windows and in the foot wells.

Maintenance

Air intake

The air intake in front of the

windscreen in the engine

compartment must be kept clear to

allow air intake. Remove any leaves,

dirt or snow.

Pollen filter

The pollen filter cleans dust, soot,

pollen and spores from the air

entering the vehicle through the air

intake.

Air conditioning regular

operation

In order to ensure continuously

efficient performance, cooling must

be operated for a few minutes once a

month, irrespective of the weather

and time of year. Operation with

cooling is not possible when outside

temperature is too low.

Service

For optimal cooling performance, it is

recommended that the climate control

system be checked annually, starting

three years after initial vehicle

registration, including:

■ Functionality and pressure test

■ Heating functionality

■ Leakage check

■ Check of drive belts

■ Cleaning of condenser and

evaporator drainage

■ Performance check

Driving and operating 101

Driving and operating

Driving hints ............................... 101

Starting and operating ............... 101

Engine exhaust .......................... 106

Manual transmission .................. 107

Manual transmission automa‐

ted .............................................. 108

Brakes ........................................ 112

Ride control systems ................. 113

Cruise control ............................. 115

Object detection systems ........... 116

Fuel ............................................ 118

Towing ....................................... 123

Driving hints

Control of the vehicle

Never coast with engine not

running (except during

Autostop)

Many systems will not function in this

situation (e.g. brake servo unit, power

steering). Driving in this manner is a

danger to yourself and others. All

systems function during an Autostop,

but there will be a controlled reduction

in power steering assist and vehicle

speed is reduced.

Stop-start system 3 103.

Pedals

To ensure the pedal travel is

uninhibited, there must be no mats in

the area of the pedals.

Starting and operating

New vehicle running-in

Do not brake unnecessarily hard for

the first few journeys.

During the first drive, smoke may

occur because of wax and oil

evaporating off the exhaust system.

Park the vehicle in the open for a

while after the first drive and avoid

inhaling the fumes.

During the running-in period fuel and

engine oil consumption may be

higher and the cleaning process of

the diesel particle filter may take

place more often. Autostop may be

inhibited to allow for charging the

battery.

Diesel particle filter 3 106.

102 Driving and operating

Ignition switch positions

STOP = Steering wheel lock

released, ignition off

MAR = Ignition on, for diesel

engine: preheating

AVV = Starting

Starting the engine

Manual transmission: operate clutch

and brake.

Manual transmission automated:

operate brake, the transmission

automatically shifts to N (neutral)

Do not operate the accelerator pedal.

Diesel engine: turn the key to position

MAR for preheating until control

indicator ! extinguishes.

Turn the key briefly to position AVV

and release.

Before restarting or to switch off the

engine, turn the key back to position

STOP.

Autostop

During an Autostop, the engine is

restarted automatically by depressing

the clutch pedal. Vehicles with

manual transmission automated

(MTA): shift to a forward gear, release

brake pedal or move lever to +, – or

R to enable an automatic restart.

Stop-start system 3 103.

Starting the vehicle at low

temperatures

The start of the engine without

additional heaters is possible down to

-25 °С for diesel engines and -30 °C

for petrol engines. Required is an

engine oil with the correct viscosity,

the correct fuel, performed services

and a sufficiently charged battery.

Driving and operating 103

Turbo engine warm-up

Upon start-up, engine available

torque may be limited for a short time,

especially when the engine

temperature is cold. The limitation is

to allow the lubrication system to fully

protect the engine.

Vehicle shutdown

Fuel cut-off system

In the event of a collision of a certain

severity, the fuel system is cut-off and

the engine is switched off

automatically, for safety reasons. A

corresponding warning message may

also appear in the Driver Information

Centre 3 79.

Note

In addition, the vehicle is

automatically unlocked and the

interior lights are illuminated.

Turn the ignition key to position

STOP to prevent battery discharge

and seek the assistance of a

workshop immediately. Have the

vehicle checked for fuel leaks in the

engine compartment, beneath the

vehicle and near the fuel tank.

To reset the fuel cut-off system and

enable the vehicle to be driven:

1. Turn the ignition key to position

MAR 3 102

2. Fully actuate the right turn signal

light 3 90

3. Deactivate the right turn signal

light

4. Fully actuate the left turn signal

light

5. Deactivate the left turn signal light

6. Repeat steps 2, 3, 4 and 5.

7. Turn the ignition key to position

STOP.

9 Danger

If you can smell fuel in the vehicle,

or a fuel leak is present, have the

cause of this remedied

immediately by a workshop. Do

not reset the fuel cut-off system, to

avoid the risk of fire.

Fuel system messages 3 85.

Overrun cut-off

The fuel supply is automatically cut-

off during overrun, i.e. when the

vehicle is driven with a gear engaged

but accelerator is released.

Stop-start system

The stop-start system helps to save

fuel and to reduce exhaust emissions.

When conditions allow, it switches off

the engine as soon as the vehicle is

at a low speed or at a standstill, e.g.

at a traffic light or in a traffic jam. It

starts the engine automatically as

soon as the clutch is depressed.

A battery sensor ensures that an

Autostop is only performed if the

battery is sufficiently charged for a

restart.

104 Driving and operating

Activation

The stop-start system is available as

soon as the engine is started, the

vehicle starts-off and the conditions

as stated below in this section are

fulfilled.

Deactivation

Deactivate the stop-start system

manually by pressing the ^ button in

the centre console. LED in the button

illuminates to confirm deactivation.

Autostop

If the vehicle is at a low speed or at a

standstill, activate an Autostop as

follows:

■ Depress the clutch pedal

■ set the lever to neutral

■ release the clutch pedal

The engine will be switched off while

the ignition stays on.

An Autostop is indicated when control

indicator ^ flashes in the Driver

Information Centre 3 79.

During an Autostop, the heating and

brake performance will be

maintained.

Caution

The steering assist can be

reduced during an Autostop.

Conditions for an Autostop

The stop-start system checks if each

of the following conditions is fulfilled.

Otherwise an Autostop will be

inhibited.

■ The stop-start system is not

manually deactivated

■ the bonnet is fully closed

■ the driver's door is closed and the

driver's seat belt is fastened

■ the battery is sufficiently charged

and in good condition

■ the engine is warmed up

■ the engine coolant temperature is

not too high

■ the engine exhaust temperature is

not too high, e.g. after driving with

high engine load

Driving and operating 105

■ the ambient temperature is not too

low

■ the climate control system allows

an Autostop

■ the self-cleaning function of the

diesel particle filter is not active

■ the vehicle has moved since the

last Autostop

■ the brake vacuum is sufficient

■ the windscreen wipers are not

operating at fast speed

■ reverse gear is not selected

■ heated rear window is not operating

Ambient temperature near to the

freezing point can inhibit an Autostop.

For manual transmission automated

vehicles, an Autostop may be

inhibited until a speed of approx.

6 mph is reached.

New vehicle running-in 3 101.

Battery discharge protection

To ensure reliable engine restarts,

several battery discharge protection

features are implemented as part of

the stop-start system.

Restart the engine

Manual transmission

The selector lever must be in neutral

to enable an automatic restart.

Depress the clutch pedal to restart the

engine.

Manual transmission automated

If the lever is in position N, select

another gear, otherwise release the

brake pedal or move the lever to +, –

or R to enable an automatic restart.

When one of the following conditions

occurs during an Autostop, the

engine will need to be restarted

manually using the key.

■ the driver's seat belt is unfastened

and the driver's door is opened

■ three minutes have elapsed since

the engine was switched off

If an electrical accessory, e.g. a

portable CD player, is connected to

the power outlet, a brief power drop

during the restart may be noticeable.

Parking

■ Do not park the vehicle on an easily

ignitable surface. The high

temperature of the exhaust system

could ignite the surface.

■ Always apply parking brake. Apply

manual parking brake without

pressing release button. Apply as

firmly as possible on downhill or

uphill slopes. Depress the foot

brake at the same time to reduce

operating force.

■ Switch off the engine and ignition.

Turn the steering wheel until the

steering wheel lock engages.

■ If the vehicle is on a level surface or

uphill slope, engage first gear. On

an uphill slope, turn the front

wheels away from the kerb.

If the vehicle is on a downhill slope,

engage reverse gear. Turn the front

wheels towards the kerb.

■ Lock the vehicle.

106 Driving and operating

Note

In the event of an accident with

airbag deployment, the engine is

turned off automatically if the vehicle

comes to a standstill within a certain

time.

Engine exhaust

9 Danger

Engine exhaust gases contain

poisonous carbon monoxide,

which is colourless and odourless

and could be fatal if inhaled.

If exhaust gases enter the interior

of the vehicle, open the windows.

Have the cause of the fault

rectified by a workshop.

Avoid driving with an open load

compartment, otherwise exhaust

gases could enter the vehicle.

Diesel particle filter

The diesel particle filter system filters

harmful soot particles out of the

exhaust gases. The system includes

a self-cleaning function that runs

automatically during driving without

any notification. The filter is cleaned

by periodically burning off the soot

particles at high temperature. This

process takes place automatically

under set driving conditions and may

take up to 25 minutes. Typically it

needs 15 minutes. Autostop is not

available and fuel consumption may

be higher during this period. The

emission of smells and smoke during

this process is normal.

Under certain driving conditions, e.g.

short distances, the system cannot

clean itself automatically.

If the cleaning of the filter is required

and if previous driving conditions did

not enable automatic cleaning, it will

be indicated by control indicator

[. Simultaneously a message

may appear in the Driver Information

Centre 3 79.

Control indicator [ illuminates

when diesel particle filter is full. Start

cleaning process as soon as possible

to avoid damage to the engine.

Cleaning process

To activate cleaning process,

continue driving, keep engine speed

above 2000 rpm. Shift down if

necessary. Diesel particle filter

cleaning is then started.

Driving and operating 107

Caution

If the cleaning process is

interrupted, there is a risk of

provoking severe engine damage.

Cleaning takes place quickest at high

engine speeds and loads.

Control indicator [ extinguishes

as soon as the self-cleaning

operation is complete.

Catalytic converter

The catalytic converter reduces the

amount of harmful substances in the

exhaust gases.

Caution

Fuel grades other than those listed

on pages 3 118, 3 164 could

damage the catalytic converter or

electronic components.

Unburnt petrol will overheat and

damage the catalytic converter.

Therefore avoid excessive use of

the starter, running the fuel tank

dry and starting the engine by

pushing or towing.

In the event of misfiring, uneven

engine running, a reduction in engine

performance or other unusual

problems, have the cause of the fault

rectified by a workshop as soon as

possible. In an emergency, driving

can be continued for a short period,

keeping vehicle speed and engine

speed low.

Manual transmission

To engage reverse, with the vehicle

stationary, wait 3 seconds after

depressing the clutch pedal, pull up

the collar on the selector lever and

engage the gear.

If the gear does not engage, set the

lever to neutral, release the clutch

pedal and depress again; then repeat

gear selection.

Do not grind the clutch unnecessarily.

When operating, depress the clutch

pedal completely. Do not use the

pedal as a foot rest.

108 Driving and operating

Caution

It is not advisable to drive with the

hand resting on the selector lever.

When gearshifting is recommended

to improve fuel economy, control

indicator [ or Ò illuminates in the

Driver Information Centre 3 75.

Manual transmission

automated

The manual transmission automated

(MTA) permits manual (manual

mode) or automatic gear shifting

(automatic mode), both with

automatic clutch control.

Transmission display

Shows the mode and current gear.

Starting the engine

Depress the foot brake when starting

the engine.

If the foot brake is not depressed, a

warning message appears in the

Driver Information Centre in

conjuction with a warning chime

3 85 and the engine cannot be

started.

Note

The volume of the warning chime

can also be adjusted via the Driver

Information Centre 3 79.

When the foot brake is depressed, the

transmission automatically shifts to

N (neutral) and the engine can be

started. There may be a slight delay.

Autostop

During an Autostop, if the gearshift

lever is in position N, select another

gear, otherwise release the brake

pedal or move the lever to +, – or R to

enable an automatic restart of the

engine.

Stop-start system 3 103.

Driving and operating 109

Selector lever

Always move the selector lever in the

appropriate direction as far as it will

go.

After selecting A/M, + or - and

releasing the selector lever, the lever

automatically returns to the centre

position.

N = Neutral.

= Drive position.

A/M = Switch between automatic

and manual mode.

The transmission display

shows AUTO when in

automatic mode.

R = Reverse gear.

Engage only when vehicle is

stationary. The transmission

display shows "R" when

reverse gear is engaged.

+ = Shift to a higher gear.

- = Shift to a lower gear.

Starting-off

When the engine is started, depress

the foot brake and move the selector

lever towards + to engage first gear.

Shift to a higher or lower gear by

moving selector lever to + or -.

Gears can be skipped by moving the

selector lever repeatedly at short

intervals.

The driver will be alerted to an

incorrect gear selection by an audible

warning chime in conjunction with a

message in the Driver Information

Centre 3 79. The system will

downshift, selecting the most

appropriate gear automatically.

If R is selected, reverse gear is

engaged. The vehicle starts to move

when the foot brake is released. To

start off quickly, release the foot brake

and accelerate immediately after

engaging a gear.

Move the selector lever towards A/M

to engage automatic mode; the

transmission shifts to other gears

automatically, dependent on driving

conditions.

To engage manual mode, move the

selector lever towards A/M. The

current gear will appear in the

transmission display.

Stopping the vehicle

In automatic or manual mode,

first gear is engaged and the clutch is

released when the vehicle is stopped.

In R, reverse gear remains engaged.

When stopping on gradients, engage

parking brake or depress the foot

brake. To prevent overheating of the

clutch, an intermittent audible

warning chime may sound as a signal

to depress the foot brake or apply the

parking brake.

Switch off engine if stopping for a

lengthy period, e.g. in traffic jams.

110 Driving and operating

When the vehicle is parked and the

driver's door is opened, a warning

chime will sound if neutral is not

selected or the foot brake has not

been depressed.

Engine braking

Automatic mode

When driving downhill, the manual

transmission automated does not

shift into higher gears until a fairly

high engine speed has been reached.

It shifts down in good time when

braking.

Manual mode

To utilise the engine braking effect,

select a lower gear in good time when

driving downhill.

Rocking the vehicle

Rocking the vehicle is only

permissible if the vehicle is stuck in

sand, mud, snow or a hole. Move the

selector lever between R and A/M (or

between + and -) in a repeat pattern,

while applying light pressure to the

accelerator pedal. Do not race the

engine and avoid sudden

acceleration.

Parking

Apply the parking brake. The most

recently engaged gear (see

transmission display) remains

engaged. With N, no gear is engaged.

When the ignition is switched off, the

transmission no longer responds to

movement of the selector lever.

If the ignition is not switched off, or the

parking brake has not been applied, a

warning chime will sound upon

opening the driver's door.

Manual mode

If engine speed is too low, the

transmission automatically shifts to a

lower gear.

In manual mode, no automatic

shifting to a higher gear takes place

at high engine revolutions. If engine

speed is too high, the transmission

only switches to a higher gear via

kickdown.

Kickdown 3 111.

Driving and operating 111

Electronic driving

programmes

Eco mode E

When automatic mode is engaged,

the Eco mode can be selected to

reduce fuel consumption.

Eco mode selects the most suitable

gear depending on the speed of the

vehicle, the engine speed and the

intensity with which the accelerator is

pressed.

Activation

Press the E button on the selector

lever housing. Control indicator E is

shown in the transmission display to

indicate activation.

Deactivation

Eco mode is switched off by:

■ pressing the E button again,

■ switching to manual mode.

In order to protect the transmission at

extremely high clutch temperatures,

an intermittent audible warning chime

may sound. In such cases, depress

the foot brake, select N and apply the

parking brake to allow the clutch to

cool down.

Kickdown

If the accelerator pedal is pressed

past the pressure point, the

transmission shifts to a lower gear

depending on engine speed. Full

engine power is available for

acceleration.

If engine speed is too high the

transmission switches to a higher

gear, even in manual mode. Without

kickdown this automatic shift is not

effected in manual mode.

Fault

In the event of a fault, control indicator

Ñ is shown in the transmission

display.

Continued driving is possible,

provided the vehicle is driven with

care and anticipation. A warning

message may appear in the Driver

Information Centre in conjunction with

a warning chime 3 85.

Note

The volume of the warning chime

can also be adjusted via the Driver

Information Centre 3 79.

Have the cause of the fault remedied

by a workshop.

112 Driving and operating

Brakes

The brake system comprises two

independent brake circuits.

If a brake circuit fails, the vehicle can

still be braked using the other brake

circuit. However, braking effect is

achieved only when the brake pedal

is depressed firmly. Considerably

more force is needed for this. The

braking distance is extended. Seek

the assistance of a workshop before

continuing your journey.

When the engine is not running, the

support of the brake servo unit

disappears once the brake pedal has

been depressed once or twice.

Braking effect is not reduced, but

braking requires significantly greater

force. It is especially important to bear

this in mind when being towed.

Control indicator R 3 74.

Antilock brake system

Antilock brake system (ABS)

prevents the wheels from locking.

ABS starts to regulate brake pressure

as soon as a wheel shows a tendency

to lock. The vehicle remains

steerable, even during hard braking.

ABS control is made apparent

through a pulse in the brake pedal

and the noise of the regulation

process.

For optimum braking, keep the brake

pedal fully depressed throughout the

braking process, despite the fact that

the pedal is pulsating. Do not reduce

the pressure on the pedal.

After starting off the system performs

a self-test which may be audible.

Control indicator u 3 75.

Fault

9 Warning

If there is a fault in the ABS, the

wheels may be liable to lock due

to braking that is heavier than

normal. The advantages of ABS

are no longer available. During

hard braking, the vehicle can no

longer be steered and may

swerve.

Have the cause of the fault remedied

by a workshop.

Parking brake

Manual parking brake

Always apply parking brake firmly

without operating the release button,

and apply as firmly as possible on a

downhill or uphill slope.

Driving and operating 113

To release the parking brake, pull the

lever up slightly, press the release

button and fully lower the lever.

To reduce the operating forces of the

parking brake, depress the foot brake

at the same time.

A warning chime will sound if a certain

speed is exceeded with the parking

brake applied.

Note

The volume of the warning chime

can also be adjusted via the Driver

Information Centre 3 79.

Control indicator R 3 74.

Brake assist

If the brake pedal is depressed

quickly and forcefully, maximum

brake force is automatically applied

(full braking).

Maintain steady pressure on the

brake pedal for as long as full braking

is required. Maximum brake force is

automatically reduced when the

brake pedal is released.

Hill start assist

The system helps prevent unintended

movement when driving away on

inclines.

When releasing the foot brake after

stopping on an incline, the brakes

remain on for a further two seconds.

The brakes release automatically as

soon as the vehicle begins to

accelerate.

If control indicator Z illuminates

while driving, there is a fault in the Hill

start assist 3 75. Seek the assistance

of a workshop to have the fault

remedied.

The Hill start assist is not active

during an Autostop.

Stop-start system 3 103.

Ride control systems

Traction Control system

The Anti-Slip Regulator (ASR) is a

component of the Electronic Stability

Program (ESP).

ASR improves driving stability when

necessary, regardless of the type of

road surface or tyre grip, by

preventing the drive wheels from

spinning.

As soon as the drive wheels starts to

spin, engine output is reduced and

the wheel spinning the most is braked

individually. This considerably

improves the driving stability of the

vehicle on slippery road surfaces.

ASR is operational as soon as the

control indicator x extinguishes.

When ASR is active, control indicator

x flashes.

114 Driving and operating

9 Warning

Do not let this special safety

feature tempt you into taking risks

when driving.

Adapt speed to the road

conditions.

Deactivation

ASR can be switched off when

spinning of drive wheels is required:

press button ASR OFF briefly.

LED in button illuminates and a

message appears in the Driver

Information Centre.

ASR is reactivated by pressing the

ASR OFF button again.

ASR is also reactivated the next time

the ignition is switched on.

Fault

ASR will switch off automatically in

the event of a fault. Control indicator

x will illuminate in the instrument

cluster in conjunction with a message

in the Driver Information Centre 3 79.

Have the cause of the fault remedied

by a workshop.

Control indicator x 3 76.

Electronic stability

program

Electronic Stability Program (ESP)

improves driving stability when

necessary, regardless of the type of

road surface or tyre grip. It also

prevents the drive wheels from

spinning.

As soon as the vehicle starts to

swerve (understeer/oversteer),

engine output is reduced and the

wheels are braked individually. This

considerably improves the driving

stability of the vehicle on slippery road

surfaces.

ESP is operational as soon as control

indicator x extinguishes.

When ESP comes into action, control

indicator x flashes.

The ESP system is automatically

activated when the vehicle is started

and cannot be deactivated

9 Warning

Do not let this special safety

feature tempt you into taking risks

when driving.

Adapt speed to the road

conditions.

Fault

In the event of a fault, ESP will be

automatically switched off and control

indicator x will illuminate in the

instrument cluster in conjunction with

a message in the Driver Information

Centre 3 79. The LED in the ASR

OFF button will also illuminate.

Driving and operating 115

Have the cause of the fault remedied

by a workshop.

Control indicator x 3 76.

Cruise control

The cruise control can store and

maintain speeds above approx.

20 mph. Deviations from the stored

speeds may occur when driving uphill

or downhill.

Do not use the cruise control if it is not

advisable to maintain a constant

speed.

Control indicator m 3 79.

Switching on

Turn end of lever to the ON position;

control indicator m illuminates in the

instrument cluster in conjunction with

a message in the Driver Information

Centre.

Activation

Accelerate to the desired speed and

push lever upwards (+); the current

speed is stored and maintained.

Accelerator pedal can be released.

Vehicle speed can be increased by

depressing the accelerator pedal.

When the accelerator pedal is

released, the previously stored speed

is resumed.

Cruise control remains activated

while gearshifting.

Increase speed

With cruise control active, push lever

upwards (+) or briefly push lever

upwards (+) repeatedly: speed

increases continuously or in small

increments.

116 Driving and operating

Alternatively accelerate to the desired

speed and store by pushing lever

upwards (+).

Reduce speed

With cruise control active, push lever

downwards (-) or briefly push lever

downwards (-) repeatedly; speed

decreases continuously or in small

increments.

Deactivation

Automatic deactivation:

■ vehicle speed below approx.

20 mph,

■ the brake pedal is depressed,

■ the clutch pedal is depressed,

■ the traction control system/Anti-Slip

Regulator (ASR) or Electronic

Stability Program (ESP) is

operating.

Resume stored speed

Press button = at a speed above

20 mph. The stored speed will be

obtained.

Switching off

Turn end of lever to the OFF position;

control indicator m extinguishes. The

stored speed is deleted. Switching off

the ignition also deletes the stored

speed.

Object detection

systems

Parking assist

The parking assist makes parking

easier by measuring the distance

between the vehicle and obstacles,

and giving acoustic signals. It is the

driver, however, who bears full

responsibility for the parking

manoeuvre.

The system consists of four ultrasonic

parking sensors in the rear bumper.

Control indicator r 3 75.

Driving and operating 117

System operation

The parking assist is turned on

automatically when reverse gear is

engaged.

The intervals between the beeps

become shorter as the vehicle gets

closer to the obstacle. When the

distance is less than 30 cm, the

beeping is a continuous tone which

stops immediately when the distance

is increased.

Fault

In the event of a fault in the system,

r illuminates and a message is

displayed in the Driver Information

Centre 3 79.

The following conditions could affect

the system's performance:

■ The ultrasonic sensors are not

clean. Keep the bumper free of

mud, dirt, snow, ice and slush.

■ The sensors are covered by frost or

ice.

■ The rear doors / tailgate are open.

■ An object was hanging out of the

rear doors / tailgate during the last

drive cycle. Once the object has

been removed, the parking assist

will return to normal operation.

■ An object or cover is attached to the

rear of the vehicle.

■ The bumper is damaged. Take the

vehicle to a workshop to repair the

system.

■ Other conditions, such as

vibrations from a jackhammer, are

affecting system performance.

In the event the system still does not

work properly, seek the assistance of

a workshop.

A warning chime is also sounded

briefly if a fault is present when

reverse gear is engaged 3 85.

Note

The volume of the warning chime

can also be adjusted via the Driver

Information Centre 3 79.

Important hints for using the

parking assist systems

9 Warning

Under certain circumstances,

various reflective surfaces on

objects or clothing as well as

external noise sources may cause

the system to fail to detect

obstacles.

Special attention has to be paid to

low obstacles which can damage

the lower part of the bumper. If

such obstacles leave the detection

area of the sensors during

approach of the vehicle, a

continuous warning tone will

sound.

118 Driving and operating

Caution

Performance of the sensor can be

reduced when sensors are

covered, e.g. by ice or snow.

Performance of the parking assist

systems can be reduced due to

heavy loading.

Special conditions apply if there

are taller vehicles involved (e.g.

off-road vehicles, mini vans,

vans). Object identification in the

upper part of these vehicles

cannot be guaranteed.

Objects with a very small reflection

cross section, like objects of

narrow size or soft materials, may

not be detected by the system.

Parking assist will not avoid a

collision with objects which are out

of the detection range of the

sensors.

Note

The parking assist system

automatically detects factory-fitted

towing equipment. It is deactivated

when the connector is plugged in.

The sensor may detect a non-

existent object (echo disturbance)

caused by external acoustic or

mechanical disturbances.

Fuel

Fuel for petrol engines

Only use unleaded fuel that complies

with European standard EN 228 or

E DIN 51626-1 or equivalent.

Your engine is capable of running

with E10 fuel that fulfills these

standards. E10 fuel contains up to

10 % bioethanol.

Use fuel with the recommended

octane rating 3 164. Use of fuel with

too low an octane rating can reduce

engine power and torque and slightly

increases fuel consumption.

Caution

Do not use fuel or fuel additives

that contain metallic compounds

such as manganese-based

additives. This may cause engine

damage.

Driving and operating 119

Caution

Use of fuel that does not comply to

EN 228 or E DIN 51626-1 or

equivalent can lead to deposits or

engine damage and may affect

your warranty.

Caution

Use of fuel with too low an octane

rating could lead to uncontrolled

combustion and engine damage.

Fuel for diesel engines

Only use diesel fuel that complies

with EN 590.

In countries outside the European

Union use Euro-Diesel fuel with a

sulphur concentration below 50 ppm.

Caution

Use of fuel that does not comply to

EN 590 or similar can lead to

engine powerloss, increased wear

or engine damage and may affect

your warranty.

Do not use marine diesel oils, heating

oils, Aquazole and similar diesel-

water emulsions. Diesel fuels must

not be diluted with fuels for petrol

engines.

Fuel for natural gas

operation

Use natural gas with a methane

content of approx. 78 - 99 %. L-gas

(low) has approx. 78 - 87 % and H-gas

(high) has approx. 87 - 99 %. Biogas

with the same methane content can

also be used if it has been chemically

prepared and desulphurised.

Only use natural gas or biogas that

complies with DIN 51624.

Liquid gas or LPG must not be used.

Fuel selector

Pressing button Y in the centre

console switches between petrol and

natural gas operation. The LED 1

status shows the current operating

mode.

1 off = natural gas

operation.

1 illumi‐

nates

= petrol operation.

As soon as the natural gas tanks are

empty, petrol operation is

automatically engaged. Control

120 Driving and operating

indicator Y illuminates in the Driver

Information Centre 3 79 until the

ignition is switched off.

A slight loss of power and torque can

be expected in petrol operation. You

must therefore adapt your driving

style (e.g. during overtaking

manoeuvres) and vehicle loads (e.g.

towing loads) accordingly.

Every six months run the petrol tank

down until control indicator §

illuminates and then refuel. This is

necessary to maintain fuel quality as

well as system function necessary for

petrol operation.

Fill the tank completely at regular

intervals to prevent corrosion in the

tank.

Refuelling

Fuel filler flap is located at left rear

side of vehicle.

9 Danger

Before refuelling, switch off engine

and any external heaters with

combustion chambers. Switch off

any mobile phones.

Follow the operating and safety

instructions of the filling station

when refuelling.

9 Danger

Fuel is flammable and explosive.

No smoking. No naked flames or

sparks.

If you can smell fuel in your

vehicle, have the cause of this

remedied immediately by a

workshop.

Caution

In case of misfuelling, do not

switch on ignition.

Release the fuel filler flap by pulling

the flap by hand.

Insert key into fuel filler cap and turn

anticlockwise to unlock.

To remove fuel filler cap, rotate

anticlockwise.

Caution

To avoid damage, do not attempt

to operate the sliding side door

when the fuel filler flap is open.

Note

Depending on model, the sliding

side door may be fitted with a safety

system that prevents the door from

being opened fully when the fuel

filler flap is open.

Sliding side door 3 23.

Driving and operating 121

The fuel filler cap can be retained in

the bracket on the fuel filler flap.

To refuel, fully insert the pump nozzle

and switch it on.

After the automatic cut-off, the fuel

tank can be topped up with a

maximum of two doses of fuel.

Caution

Wipe off any overflowing fuel

immediately.

To close, replace fuel filler cap and

turn clockwise.

Insert key into fuel filler cap and turn

clockwise to lock, then remove key.

Close the fuel filler flap.

Natural gas refuelling

Open the fuel filler flap.

9 Warning

Refuel only with a maximum

output pressure of 250 bar. Use

only temperature compensated

filling stations.

The refuelling procedure must be

completed, i.e. the filler neck must be

vented.

The capacity of the natural gas tank

depends on outside temperature,

filling pressure and type of refuelling

system.

Close the fuel filler flap after

refuelling.

Terms for "natural gas vehicles"

abroad:

German Erdgasfahrzeuge

English NGVs = Natural Gas Vehi‐

cles

French Véhicules au gaz naturel –

or – Véhicules GNV

Italian Metano auto

Terms for "natural gas" abroad:

122 Driving and operating

German Erdgas

English CNG = Compressed

Natural Gas

French GNV = Gaz Naturel (pour)

Véhicules - or -

CGN = carburantgaz

naturel

Italian Metano (per auto)

Fuel filler cap

Only use genuine fuel filler caps.

Diesel-engined vehicles have special

fuel filler caps.

Fuel cut-off system

In the event of a collision of a certain

severity, the fuel system is cut-off and

the engine is switched off

automatically, for safety reasons.

Resetting the fuel cut-off system;

refer to "Fuel system messages"

3 85.

Fuel consumption - CO

Emissions

The fuel consumption (combined) of

the Vauxhall Combo is within a range

of 59 to 37 mpg.

The CO

emission (combined) is

within a range of 179 to 126 g/km.

For the values specific to your

vehicle, refer to the EEC Certificate of

Conformity provided with your vehicle

or other national registration

documents.

General information

The official fuel consumption and

specific CO

emission figures quoted

relate to the EU base model with

standard equipment.

Fuel consumption data and CO

emission data are determined

according to regulation R (EC) No.

715/2007 (in the applicable version),

taking into consideration the vehicle

weight in running order, as specified

by the regulation.

The figures are provided only for the

purpose of comparison between

different vehicle variants and must

not be taken as a guarantee for the

actual fuel consumption of a

particular vehicle.

Additional equipment may result in

slightly higher results than the stated

fuel consumption and CO

figures.

Furthermore, fuel consumption is

dependent on personal driving style

as well as road and traffic conditions.

Natural gas

The fuel consumption information

was obtained using reference fuel

G20 (methane proportion

99 - 100 mol%) under prescribed

driving conditions. When using

natural gas with a lower proportion of

methane, the fuel consumption can

differ from the specified values.

Driving and operating 123

Towing

General information

Only use towing equipment that has

been approved for your vehicle.

Vehicles with natural gas engine may

require special towing equipment.

Entrust retrofitting of towing

equipment to a workshop. It may be

necessary to make changes that

affect the cooling system, heat

shields or other equipment.

Fitting of towing equipment could

cover the opening of the towing eye.

If this is the case use the coupling ball

bar for towing. Always keep the

coupling ball bar in the vehicle.

Driving characteristics and

towing tips

Before attaching a trailer, lubricate

the coupling ball. However, do not do

so if a stabiliser, which acts on the

coupling ball, is being used to reduce

snaking movements.

For trailers with low driving stability

and caravan trailers with a permitted

gross vehicle weight of more than

1300 kg the use of a stabiliser is

strongly recommended when driving

above 50 mph.

If the trailer starts snaking, drive more

slowly, do not attempt to correct the

steering and brake sharply if

necessary.

When driving downhill, drive in the

same gear as if driving uphill and

drive at a similar speed.

Adjust tyre pressure to the value

specified for full load 3 174.

Trailer towing

Trailer loads

The permissible trailer loads are

vehicle and engine-dependent

maximum values which must not be

exceeded. The actual trailer load is

the difference between the actual

gross weight of the trailer and the

actual coupling socket load with the

trailer coupled.

The permissible trailer loads are

specified in the vehicle documents. In

general, they are valid for gradients

up to max. 12 %.

The permitted trailer load applies up

to the specified incline and up to an

altitude of 1000 metres above sea

level. Since engine power decreases

as altitude increases due to the air

becoming thinner, therefore reducing

climbing ability, the permissible gross

train weight also decreases by 10 %

for every 1000 metres of additional

altitude. The gross train weight does

not have to be reduced when driving

on roads with slight inclines (less than

8 %, e.g. motorways).

The permissible gross train weight

must not be exceeded. This weight is

specified on the identification plate

3 161.

Vertical coupling load

The vertical coupling load is the load

exerted by the trailer on the coupling

ball. It can be varied by changing the

weight distribution when loading the

trailer.

124 Driving and operating

The maximum permissible vertical

coupling load (75 kg) is specified on

the towing equipment identification

plate and in the vehicle documents.

Always aim for the maximum load,

especially in the case of heavy

trailers. The vertical coupling load

should never fall below 25 kg.

Rear axle load

The permissible axle loads (see

identification plate or vehicle

documents) must not be exceeded.

Vehicle care 125

Vehicle care

General Information ................... 125

Vehicle checks ........................... 126

Bulb replacement ....................... 132

Electrical system ........................ 138

Vehicle tools .............................. 142

Wheels and tyres ....................... 142

Jump starting ............................. 152

Towing ....................................... 153

Appearance care ....................... 155

General Information

Accessories and vehicle

modifications

We recommend the use of genuine

parts and accessories and factory

approved parts specific for your

vehicle type. We cannot assess or

guarantee reliability of other products

- even if they have a regulatory or

otherwise granted approval.

Do not make any modifications to the

electrical system, e.g. changes of

electronic control units (chip tuning).

Caution

When transporting the vehicle on

a train or on a recovery vehicle, the

mud flaps might be damaged.

Vehicle storage

Storage for a long period of time

If the vehicle is to be stored for several

months:

■ Wash and wax the vehicle.

■ Have the wax in the engine

compartment and underbody

checked.

■ Clean and preserve the rubber

seals.

■ Fill up fuel tank completely.

■ Change the engine oil.

■ Drain the washer fluid reservoir.

■ Check the coolant antifreeze and

corrosion protection.

■ Adjust tyre pressure to the value

specified for full load.

■ Park the vehicle in a dry, well

ventilated place. Engage first or

reverse gear to prevent the vehicle

from rolling.

■ Do not apply the parking brake.

126 Vehicle care

■ Open the bonnet, close all doors

and lock the vehicle.

■ Disconnect the clamp from the

negative terminal of the vehicle

battery. Beware that all systems are

not functional, e.g. anti-theft locking

system.

Putting back into operation

When the vehicle is to be put back into

operation:

■ Connect the clamp to the negative

terminal of the vehicle battery.

Activate the electronics of the

power windows.

■ Check tyre pressure.

■ Fill up the washer fluid reservoir.

■ Check the engine oil level.

■ Check the coolant level.

■ Fit the number plates if necessary.

End-of-life vehicle

recovery

Information on end-of-life vehicle

recovery centres and the recycling of

end-of-life vehicles is available on our

website. Only entrust this work to an

authorised recycling centre.

Natural gas vehicles must be recycled

by a service centre authorised for

natural gas vehicles.

Vehicle checks

Performing work

9 Warning

Only perform engine compartment

checks when the ignition is off.

The cooling fan may start

operating even if the ignition is off.

Vehicle care 127

9 Danger

The ignition system uses

extremely high voltage. Do not

touch.

Bonnet

Opening

Pull the release lever and return it to

its original position.

Push the safety catch and open the

bonnet.

Secure the bonnet support.

If the bonnet is opened during an

Autostop, the engine will be restarted

automatically for safety reasons.

Stop-start system 3 103.

Closing

Lower the bonnet and allow it to drop

into the catch. Check that the bonnet

is engaged.

Engine oil

Check the engine oil level manually

on a regular basis to prevent damage

to the engine. Ensure that the correct

specification of oil is used.

Recommended fluids and lubricants

3 159.

Check with the vehicle on a level

surface. The engine must be at

operating temperature and switched

off for at least 5 minutes.

Pull out the dipstick, wipe it clean,

insert it to the stop on the handle, pull

out and read the engine oil level.

128 Vehicle care

Caution

It is the owner's responsibility to

maintain the proper level of an

appropriate quality oil in the

engine.

Insert dipstick to the stop on the

handle and make half a turn.

When the engine oil level has

dropped to the MIN mark, top up

engine oil.

We recommend the use of the same

grade of engine oil that was used at

last change.

The engine oil level must not exceed

the MAX mark on the dipstick.

Caution

Overfilled engine oil must be

drained or suctioned out.

Capacities 3 173.

Fit the cap on straight and tighten it.

Engine coolant

The coolant provides freeze

protection down to approx. -28 °C. In

northern countries with very low

temperatures, the factory filled

coolant provides frost protection

down to approx. -37°C.

Caution

Only use approved antifreeze.

Coolant level

Caution

Too low a coolant level can cause

engine damage.

Vehicle care 129

If the cooling system is cold, the

coolant level should be between the

MIN and MAX mark. Top up if the

level is low.

9 Warning

Allow the engine to cool before

opening the cap. Carefully open

the cap, relieving the pressure

slowly.

To top up use a 1:1 mixture of

released coolant concentrate mixed

with clean tap water. If no coolant

concentrate is available, use clean

tap water. Install the cap tightly. Have

the coolant concentration checked

and have the cause of the coolant

loss remedied by a workshop.

Power steering fluid

If the fluid level in the reservoir falls

below the MIN mark consult a

workshop.

Washer fluid

Fill with clean water mixed with a

suitable quantity of windscreen

washer fluid which contains

antifreeze.

Caution

Only washer fluid with a sufficient

antifreeze concentration provides

protection at low temperatures or

a sudden drop in temperature.

130 Vehicle care

Brakes

A squealing noise, or illumination of

brake pad wear control indicator F

indicates that the brake lining is at its

minimum thickness.

Continued driving is possible but

have the brake linings replaced as

soon as possible.

Once new brake linings are installed,

do not brake unnecessarily hard for

the first few journeys.

Brake pad wear indicator F 3 75.

Brake fluid

9 Warning

Brake fluid is poisonous and

corrosive. Avoid contact with eyes,

skin, fabrics and painted surfaces.

The brake fluid level must be between

the MIN and MAX marks.

When topping up, ensure maximum

cleanliness as contamination of the

brake fluid can lead to brake system

malfunctions. Have the cause of the

loss of brake fluid remedied by a

workshop.

Only use high-performance brake

fluid approved for the vehicle.

Brake and clutch fluid 3 159.

Battery

The vehicle battery is maintenance-

free provided that the driving profile

allows sufficient charging of the

battery. Short-distance-driving and

frequent engine starts can discharge

the battery. Avoid the use of

unnecessary electrical consumers.

Batteries do not belong in household

waste. They must be disposed of at

an appropriate recycling collection

point.

Laying up the vehicle for more than

4 weeks can lead to battery

discharge. Disconnect the clamp from

the negative terminal of the vehicle

battery.

Ensure the ignition is switched off

before connecting or disconnecting

the vehicle battery.

Vehicle care 131

The anti-theft alarm siren must be

deactivated as follows: Switch the

ignition on then off, disconnect the

vehicle's battery within 15 seconds.

Replacing the battery

Note

Any deviation from the instructions

given in this paragraph may lead to

a temporary deactivation of the stop-

start system.

In vehicles with stop-start system,

ensure the correct battery is used

when replacing the battery. We

recommend that you have the battery

replaced by a workshop.

Stop-start system 3 103.

Charging the battery

9 Warning

On vehicles with stop-start

system, ensure that the charging

potential does not exceed 14.6

volts when using a battery

charger. Otherwise the battery

might be damaged.

Jump starting 3 152.

Wiper blade replacement

Lift the wiper arm until it stays in the

raised position, press button to

disengage the wiper blade and

remove.

Attach the wiper blade slightly angled

to the wiper arm and push until it

engages.

Lower wiper arm carefully.

Wiper blade on rear swing door

Lift wiper arm, press and hold

retaining clip and detach wiper blade.

Attach the wiper blade slightly angled

to the wiper arm and push until it

engages.

Lower wiper arm carefully.

132 Vehicle care

Wiper blade on tailgate

Lift wiper arm, press retaining clips to

detach wiper blade.

Attach the wiper blade to the wiper

arm and push until it engages.

Lower wiper arm carefully.

Bulb replacement

Switch off the ignition and switch off

the relevant switch or close the doors.

Only hold a new bulb at the base! Do

not touch the bulb glass with bare

hands.

Use only the same bulb type for

replacement.

Replace headlight bulbs from within

the engine compartment.

Bulb check

After a bulb replacement, switch on

the ignition, operate and check the

lights.

Halogen headlights

Headlights have separate systems for

low beam/sidelight 1 (outer bulb),

high beam/daytime running light 2

(inner bulb).

To access bulbs, pull off protective

covers.

Low beam

1. Remove protective cover.

2. Detach connector from bulb.

3. Disengage wire clip and remove

bulb from reflector.

Vehicle care 133

4. Insert new bulb in reflector so that

the locating tab of the bulb aligns

with the reflector recess.

5. Attach connector to bulb.

6. Engage wire clip.

7. Install protective cover.

High beam

1. Remove protective cover.

2. Detach connector from bulb.

3. Disengage wire clip and remove

bulb from reflector.

4. Insert new bulb in reflector so that

the bulb aligns with the reflector

recess.

5. Engage wire clip and attach

connector onto bulb.

6. Install protective cover.

Sidelight

1. Remove protective cover.

Withdraw bulb holder from

reflector by turning anticlockwise.

2. Remove bulb from socket, insert

new bulb.

3. Insert bulb holder in reflector.

4. Rotate clockwise to engage.

5. Install protective cover.

Daytime running light

1. Remove protective cover.

134 Vehicle care

2. Withdraw bulb holder from

reflector by turning anticlockwise.

3. Remove bulb from socket, insert

new bulb.

4. Insert bulb holder in reflector.

5. Rotate clockwise to engage.

6. Install protective cover.

Front turn signal light

1. Remove protective cover.

2. Withdraw bulb holder from

reflector by turning anticlockwise.

3. Push bulb into holder slightly,

rotate anticlockwise, remove and

renew bulb.

4. Insert bulb holder in reflector.

5. Rotate clockwise to engage.

6. Install protective cover.

Tail lights

1. Remove the three retaining

screws.

2. Remove light housing from

vehicle.

3. Disengage connector plug from

bulb holder.

Vehicle care 135

4. Unscrew the four retaining screws

using a screwdriver. Turn bulb

holder for reverse light

anticlockwise and replace bulb.

5. Remove bulb holder and seal

from light housing.

6. Push bulb into socket slightly,

rotate anticlockwise, remove and

renew bulb.

Brake light (1)

Turn signal light (2)

Tail light (3)

Tail light/fog light (4)

7. Install seal on bulb holder

ensuring it is fitted correctly.

Install bulb holder in light housing

ensuring that it engages correctly.

Tighten the four retaining screws

using a screwdriver.

8. Install reverse light bulb holder

and turn clockwise to tighten.

9. Engage connector plug.

10. Insert light housing in body,

ensuring correct positioning.

Tighten the three retaining

screws.

Side turn signal lights

Have bulbs replaced by a workshop.

Centre high-mounted

brake light

Have bulbs replaced by a workshop.

136 Vehicle care

Number plate light

Tailgate

1. Insert screwdriver as indicated by

the arrows, press to the side and

release the bulb housing.

2. Turn the bulb holder anticlockwise

to remove from the bulb housing.

Remove the bulb by pulling.

3. Replace the bulb.

4. Insert bulb holder in bulb housing

and rotate clockwise

5. Install the bulb housing ensuring it

engages correctly.

Back doors

1. Insert screwdriver as indicated by

the arrows, press to the left and

release the bulb housing.

2. Press bulb slightly towards spring

clip and remove.

3. Replace the bulb.

4. Install the bulb housing ensuring it

engages correctly.

Vehicle care 137

Interior lights

Front and rear courtesy light

1. Remove lens using a flat blade

screwdriver.

2. Open the rear cover.

3. Renew bulb.

4. Close rear cover.

5. Reinstall lens.

Front courtesy light, reading

lights

1. Remove lens using a flat blade

screwdriver.

2. Open the rear cover.

3. Renew bulbs.

4. Close rear cover.

5. Reinstall lens.

Removable rear courtesy light

1. Press the button at the top of the

lamp assembly to release it.

138 Vehicle care

2. Prise the lamp assembly out at the

points illustrated.

3. Renew bulb, ensuring it engages

correctly.

4. Reinstall lamp assembly.

Instrument panel

illumination

Have bulbs replaced by a workshop.

Electrical system

Fuses

Data on the replacement fuse must

match the data on the defective fuse.

There are two fuse boxes in the

vehicle:

■ on the right of the engine

compartment, next to the battery

■ behind a cover on the lower part of

the instrument panel, on the driver's

side

Before replacing a fuse, turn off the

respective switch and the ignition.

A blown fuse can be recognised by its

melted wire. Do not replace the fuse

until the cause of the fault has been

remedied.

Some functions are protected by

several fuses.

Fuses may also be inserted without

existence of a function.

Fuse extractor

Use a fuse extractor to remove fuses.

Vehicle care 139

Place the fuse extractor on the

various types of fuse from the top or

side, and withdraw fuse.

Engine compartment fuse

box

The fuse box is on the right of the

engine compartment, next to the

battery.

To remove the protective cover and

access the fuses, remove the two

screws (see illustration).

140 Vehicle care

No. Circuit

F09 Rear door switch

F10 Horn

F14 High beam

F15 PTCI heater

F19 Air conditioning system

F20 Heated rear window

F21 Fuel pump

F30 Fog lights

F84 CNG system

F85 Power outlets

F86 Cigarette lighter, heated seats

F87 Stop-start system

F88 Mirror heating

After having changed defective fuses

refit the fuse box cover.

If the fuse box cover is not closed

correctly, malfunction may occur.

Instrument panel fuse box

The fuse box is located behind a

cover on the lower part of the

instrument panel, on the driver's side.

Vehicle care 141

No. Circuit

F12 Right low beam

F13 Left low beam, headlight range

adjustment

F31 Fusebox relays, body control

unit relays

F32 Courtesy lights

F36 Diagnostic connector, climate

control system, Infotainment

system

F37 Instrument panel, braking

system

F38 Central locking system

F43 Windscreen washer system

F47 Power windows

F48 Power windows

F49 Exterior mirrors, Infotainment

system, parking assist

F51 Infotainment system, braking

system, clutch

No. Circuit

F53 Instrument panel

F94 Power outlet load compartment

F95 Cigarette lighter, power outlet

F96 Cigarette lighter, power outlet

F97 Heated front seat

F98 Heated front seat

142 Vehicle care

Vehicle tools

Tools

Van

The tools and the vehicle jacking

equipment are in the storage area

behind the front seat. Pull front handle

and slide seat forwards to access

3 33.

Combi, Combo Tour

The tools and the vehicle jacking

equipment are stored in the load

compartment behind a panel on the

right-hand side.

Wheel changing 3 147, Spare wheel

3 149.

Wheels and tyres

Tyre condition, wheel condition

Drive over edges slowly and at right

angles if possible. Driving over sharp

edges can cause tyre and wheel

damage. Do not trap tyres on the kerb

when parking.

Regularly check the wheels for

damage. Seek the assistance of a

workshop in the event of damage or

unusual wear.

Winter tyres

Winter tyres improve driving safety at

temperatures below 7 °C and should

therefore be fitted on all wheels.

Tyres of size 185/65 R15,

195/65 R15 and 195/60 R16 C are

permitted as winter tyres.

In accordance with country-specific

regulations, affix the speed sticker in

the driver's field of view.

Vehicle care 143

Tyre designations

E.g. 215/60 R 16 95 H

215 = Tyre width, mm

60 = Cross-section ratio (tyre

height to tyre width), %

R = Belt type: Radial

RF = Type: RunFlat

C = Cargo or commercial use

16 = Wheel diameter, inches

95 = Load index e.g. 95 is

equivalent to 690 kg

H = Speed code letter

Speed code letter:

Q = up to 100 mph

S = up to 112 mph

T = up to 118 mph

H = up to 130 mph

V = up to 150 mph

W = up to 168 mph

Tyre pressure

Check the pressure of cold tyres at

least every 14 days and before any

long journey. Do not forget the spare

wheel.

Unscrew the valve cap.

Tyre pressure 3 174.

The tyre pressure data refers to cold

tyres. It applies to summer and winter

tyres.

Always inflate the spare tyre to the

pressure specified for full load.

Incorrect tyre pressures will impair

safety, vehicle handling, comfort and

fuel economy and will increase tyre

wear.

The driver is responsible for correct

adjustment of tyre pressures.

9 Warning

If the pressure is too low, this can

result in considerable tyre warm-

up and internal damage, leading to

tread separation and even to tyre

blow-out at high speeds.

Tread depth

Check tread depth at regular

intervals.

Tyres should be replaced for safety

reasons at a tread depth of 2-3 mm

(4 mm for winter tyres).

For safety reasons, it is

recommended that the tread depth of

the tyres on one axle should not vary

by more than 2 mm.

The legally permissible minimum

tread depth (1.6 mm) has been

reached when the tread has worn

down as far as one of the tread wear

indicators (TWI). Their position is

indicated by markings on the

sidewall.

If there is more wear at the front than

the rear, swap round front wheels and

rear wheels periodically. Ensure that

the direction of rotation of the wheels

is the same as before.

144 Vehicle care

Tyres age, even if they are not used.

We recommend tyre replacement

every 6 years.

Changing tyre and wheel

size

If tyres of a different size than those

fitted at the factory are used, it may be

necessary to reprogramme the

speedometer as well as the nominal

tyre pressure and make other vehicle

modifications.

After converting to a different tyre

size, have the label with tyre

pressures replaced.

9 Warning

Use of unsuitable tyres or wheels

may lead to accidents and will

invalidate the vehicle type

approval.

Wheel covers

Wheel covers and tyres that are

factory approved for the respective

vehicle and comply with all of the

relevant wheel and tyre combination

requirements must be used.

If the wheel covers and tyres used are

not factory approved, the tyres must

not have a rim protection ridge.

Wheel covers must not impair brake

cooling.

9 Warning

Use of unsuitable tyres or wheel

covers could lead to sudden

pressure loss and thereby

accidents.

Tyre chains

Tyre chains are only permitted on the

front wheels.

Always use fine mesh chains that add

no more than 10 mm to the tyre tread

and the inboard sides (including chain

lock).

Do not exceed 30 mph when tyre

chains are fitted.

9 Warning

Damage may lead to tyre blowout.

Vehicle care 145

Tyre repair kit

Minor damage to the tyre tread can be

repaired with the tyre repair kit.

Do not remove foreign bodies from

the tyres.

Tyre damage exceeding 4 mm or that

is at tyre's sidewall cannot be repaired

with the tyre repair kit.

9 Warning

Do not drive faster than 50 mph.

Do not use for a lengthy period.

Steering and handling may be

affected.

If you have a flat tyre:

Apply the parking brake and engage

first or reverse gear.

The tyre repair kit may be located

under the front seat, in the glovebox,

or on the right side of the load

compartment behind a cover.

1. Take the tyre repair kit from the

vehicle.

2. Remove the compressor.

3. Set the compressor upright near

the tyre.

4. Unscrew valve cap from defective

tyre.

5. Screw the flexible filler hose onto

the tyre valve.

6. The switch on the compressor

must be set to J.

7. Connect the compressor plug to

the power outlet or cigarette

lighter socket.

To avoid discharging the battery,

we recommend running the

engine.

146 Vehicle care

8. Set the rocker switch on the

compressor to I. The tyre is filled

with sealant.

9. All of the sealant is pumped into

the tyre. Then the tyre is inflated.

Tyre pressure 3 174. When the

correct pressure is obtained,

switch off the compressor.

10. If a pressure of 1.5 bar is not

obtained within 5 minutes,

remove the tyre repair kit. Move

the vehicle one tyre rotation.

Reattach the tyre repair kit and

continue the filling procedure for

5 minutes. If a pressure of

1.8 bar is still not obtained within

5 minutes, the tyre is too badly

damaged. Seek the assistance of

a workshop.

Do not run the compressor longer

than 20 minutes.

11. Detach the tyre repair kit.

12. Remove any excess sealant

using a cloth.

13. Take the label indicating

maximum permitted speed from

the sealant bottle and affix in the

driver's field of view.

14. Continue driving immediately so

that sealant is evenly distributed

in the tyre. After driving approx.

6 miles (but no more than

10 minutes), stop and check tyre

pressure. Screw compressor air

hose directly onto tyre valve and

compressor when doing this.

If tyre pressure is more than

1.8 bar, set it to the correct value.

Repeat the procedure until there

is no more loss of pressure.

If the tyre pressure has fallen

below 1.8 bar, the vehicle must

not be used. Seek the assistance

of a workshop.

15. Stow away tyre repair kit in load

compartment.

Vehicle care 147

Note

The driving characteristics of the

repaired tyre are severely affected,

therefore have this tyre replaced.

If unusual noise is heard or the

compressor becomes hot, turn

compressor off and allow to cool.

Note the expiry date of the kit. After

this date its sealing capability is no

longer guaranteed. Pay attention to

storage information on sealant

bottle.

Replace the used sealant bottle.

Dispose of the bottle as prescribed

by applicable laws.

The compressor and sealant can be

used from approx. -20 °C.

Replacing the sealant canister

To replace the sealant canister:

1. Disconnect the compressor air

hose.

2. Turn the canister anticlockwise to

lift it out.

3. Insert the new canister and turn it

clockwise.

4. Connect the compressor air hose

to the canister and fit the flexible

filler tube into its allocated space.

Wheel changing

Some vehicles are equipped with a

tyre repair kit instead of a spare wheel

3 145.

Make the following preparations and

observe the following information:

■ Park the vehicle on a level, firm and

non-skid surface. The front wheels

must be in the straight-ahead

position.

■ Apply the parking brake and

engage first or reverse gear.

■ Remove the spare wheel 3 149.

■ Never change more than one wheel

at once.

■ Use the jack only to change wheels

in case of puncture, not for

seasonal winter or summer tyre

change.

■ If the ground on which the vehicle

is standing is soft, a solid board

(max. 1 cm thick) should be placed

under the jack.

■ No people or animals may be in the

vehicle when it is jacked-up.

■ Never crawl under a jacked-up

vehicle.

148 Vehicle care

■ Do not start the vehicle when it is

raised on the jack.

■ Clean wheel nuts and thread with a

clean cloth before mounting the

wheel.

9 Warning

Do not grease wheel bolt, wheel

nut and wheel nut cone.

1. Disengage wheel nut caps with a

screwdriver and remove. Pull off

the wheel cover using a suitable

tool.

2. Attach wheel wrench securely

and loosen each wheel nut by half

a turn.

3. Vehicle jacking points are located

at the front and rear.

4. Set the jack to the necessary

height. Position it directly below

the jacking point in a manner that

prevents it from slipping.

Vehicle care 149

With the jack correctly aligned,

rotate until wheel is clear of the

ground.

5. Unscrew the wheel nuts.

6. Change the wheel. Spare wheel

3 149.

7. Screw on the wheel nuts.

8. Lower vehicle.

9. Install the wheel wrench ensuring

that it locates securely and tighten

each nut in a crosswise

sequence. Tightening torque is

85 Nm (steel wheel) or 120 Nm

(alloy wheel).

10. Align the valve hole in the wheel

cover with the tyre valve before

installing.

Install wheel nut caps.

11. Stow the replaced wheel 3 149

and the vehicle tools 3 142.

12. Check the tyre pressure of the

installed tyre and the wheel nut

torque as soon as possible.

Have the defective tyre renewed or

repaired as soon as possible.

Spare wheel

Some vehicles are equipped with a

tyre repair kit 3 145 instead of a spare

wheel.

The spare wheel can be classified as

a temporary spare wheel depending

on the size compared to the other

mounted wheels and country

regulations.

Caution

The use of a spare wheel that is

smaller than the other wheels or in

combination with winter tyres

could affect driveability. Have the

defective tyre replaced as soon as

possible.

Depending on model variant, the

spare wheel is stored beneath the

floor or in the load compartment.

1. Attach the extension bar 2 to the

wheel wrench 1. Vehicle tools

3 142.

150 Vehicle care

2. Insert the wheel wrench into the

aperture in the load compartment

floor.

3. Rotate the wheel wrench to lower

the spare wheel to the floor.

4. Withdraw spare wheel from

beneath the vehicle.

5. Unscrew knob 2 and release

cable attachment 1 from spare

wheel.

6. Change the wheel.

7. Position the replaced wheel at the

rear of the vehicle with the outside

of the wheel facing downwards.

8. Pass the retainer 1 through the

hole in the rim, inserting the

locating pin into one of the bolt

holes and secure with knob 2.

9. Insert the wheel wrench into the

aperture in the load compartment

floor and rotate to fully raise the

spare wheel.

Vehicle care 151

Have the defective tyre renewed or

repaired as soon as possible.

CNG vehicles

Vehicles with CNG; the spare wheel

is located in the load compartment.

1. Unscrew two bolts using the

wheel wrench and remove spare

wheel from bracket. Vehicle tools

3 142.

2. Change the wheel.

3. Position the replaced spare wheel

onto the bracket ensuring correct

alignment of the locating pin.

4. Secure spare wheel by tightening

two bolts using the wheel wrench.

Have the defective tyre renewed or

repaired as soon as possible.

Directional tyres

Fit directional tyres such that they roll

in the direction of travel. The rolling

direction is indicated by a symbol

(e.g. an arrow) on the sidewall.

The following applies to tyres fitted

opposing the rolling direction:

■ Driveability may be affected. Have

the defective tyre renewed or

repaired as soon as possible.

■ Drive particularly carefully on wet

and snow-covered road surfaces.

152 Vehicle care

Jump starting

Do not start with quick charger.

A vehicle with a discharged battery

can be started using jump leads and

the battery of another vehicle.

9 Warning

Be extremely careful when starting

with jump leads. Any deviation

from the following instructions can

lead to injuries or damage caused

by battery explosion or damage to

the electrical systems of both

vehicles.

9 Warning

Avoid contact of the battery with

eyes, skin, fabrics and painted

surfaces. The fluid contains

sulphuric acid which can cause

injuries and damage in the event

of direct contact.

■ Never expose the battery to naked

flames or sparks.

■ A discharged battery can already

freeze at a temperature of 0 °C.

Defrost the frozen battery before

connecting jump leads.

■ Wear eye protection and protective

clothing when handling a battery.

■ Use a booster battery with the

same voltage (12 Volts). Its

capacity (Ah) must not be much

less than that of the discharged

battery.

■ Use jump leads with insulated

terminals and a cross section of at

least 16 mm

(25 mm

for diesel

engines).

■ Do not disconnect the discharged

battery from the vehicle.

■ Switch off all unnecessary electrical

consumers.

■ Do not lean over the battery during

jump starting.

■ Do not allow the terminals of one

lead to touch those of the other

lead.

■ The vehicles must not come into

contact with each other during the

jump starting process.

■ Apply the parking brake,

transmission in neutral.

Lead connection order:

1. Connect the red lead to the

positive terminal of the booster

battery.

2. Connect the other end of the red

lead to the positive terminal of the

discharged battery.

Vehicle care 153

3. Connect the black lead to the

negative terminal of the booster

battery.

4. Connect the other end of the black

lead to a vehicle grounding point,

such as the engine block or an

engine mounting bolt. Connect as

far away from the discharged

battery as possible, however at

least 60 cm.

Route the leads so that they cannot

catch on rotating parts in the engine

compartment.

To start the engine:

1. Start the engine of the vehicle

providing the jump.

2. After 5 minutes, start the other

engine. Start attempts should be

made for no longer than

15 seconds at an interval of

1 minute.

3. Allow both engines to idle for

approx. 3 minutes with the leads

connected.

4. Switch on electrical consumers

(e.g. headlights, heated rear

window) of the vehicle receiving

the jump start.

5. Reverse above sequence exactly

when removing leads.

Towing

Towing the vehicle

Release the cap by carefully lifting

with a screwdriver. To prevent

damage, it is recommended to place

a cloth between the screwdriver and

the frame.

The towing eye is stowed with the

vehicle tools 3 142.

Screw in the towing eye as far as it will

go until it stops in a horizontal

position.

Attach a tow rope – or better still a tow

rod – to the towing eye.

154 Vehicle care

Caution

The towing eye must only be used

for towing and not for recovering

the vehicle.

Switch on ignition to release steering

wheel lock and to permit operation of

brake lights, horn and windscreen

wiper.

Transmission in neutral.

Note

If neutral cannot be selected on

vehicles with manual transmission

automated (MTA), the vehicle must

only be towed with the drive wheels

raised off the ground.

Caution

Drive slowly. Do not drive jerkily.

Excessive tractive force can

damage the vehicle.

When the engine is not running,

considerably more force is needed to

brake and steer.

To prevent the entry of exhaust gases

from the towing vehicle, switch on the

air recirculation and close the

windows.

Seek the assistance of a workshop.

After towing, unscrew the towing eye

and replace the cap.

Towing another vehicle

Insert a screwdriver in the slot at the

side of the cap. Release the cap by

carefully levering the screwdriver. To

prevent damage it is recommended to

place a cloth between the screwdriver

and the frame.

The towing eye is stowed with the

vehicle tools 3 142.

Screw in the towing eye as far as it will

go until it stops in a horizontal

position.

Attach a tow rope – or even better a

tow bar – to the towing eye.

The towing eye must only be used for

towing and not for recovering a

vehicle.

Caution

Drive slowly. Do not drive jerkily.

Excessive tractive force can

damage the vehicle.

After towing, unscrew the towing eye.

Insert cap.

Vehicle care 155

Appearance care

Exterior care

Locks

The locks are lubricated at the factory

using a high quality lock cylinder

grease. Use de-icing agent only when

absolutely necessary, as this has a

degreasing effect and impairs lock

function. After using de-icing agent,

have the locks regreased by a

workshop.

Washing

The paintwork of your vehicle is

exposed to environmental influences.

Wash and wax your vehicle regularly.

When using automatic vehicle

washes, select a programme that

includes waxing.

Bird droppings, dead insects, resin,

pollen and the like should be cleaned

off immediately, as they contain

aggressive constituents which can

cause paint damage.

If using a vehicle wash, comply with

the vehicle wash manufacturer's

instructions. The windscreen wiper

and rear window wiper must be

switched off. Remove antenna and

external accessories such as roof

racks etc.

If you wash your vehicle by hand,

make sure that the insides of the

wheel housings are also thoroughly

rinsed out.

Clean edges and folds on opened

doors and the bonnet as well as the

areas they cover.

Caution

Always use a cleaning agent with

a pH value of 4 to 9.

Do not use cleaning agents on hot

surfaces.

Have the door hinges of all doors

greased by a workshop.

Do not clean the engine compartment

with a steam-jet or high-pressure jet

cleaner.

Thoroughly rinse and leather-off the

vehicle. Rinse leather frequently. Use

separate leathers for painted and

glass surfaces: remnants of wax on

the windows will impair vision.

Exterior lights

Headlight and other light covers are

made of plastic. Do not use any

abrasive or caustic agents, do not use

an ice scraper, and do not clean them

dry.

Polishing and waxing

Wax the vehicle regularly (at the

latest when water no longer beads).

Otherwise, the paintwork will dry out.

Polishing is necessary only if the paint

has become dull or if solid deposits

have become attached to it.

Paintwork polish with silicone forms a

protective film, making waxing

unnecessary.

Plastic body parts must not be treated

with wax or polishing agents.

156 Vehicle care

Windows and windscreen wiper

blades

Use a soft lint-free cloth or chamois

leather together with window cleaner

and insect remover.

When cleaning the rear window from

inside, always wipe in parallel to the

heating element to prevent damage.

For mechanical removal of ice, use a

sharp-edged ice scraper. Press the

scraper firmly against the glass so

that no dirt can get under it and

scratch the glass.

Clean smearing wiper blades with a

soft cloth and window cleaner.

Glass panel

Never clean with solvents or abrasive

agents, fuels, aggressive media (e.g.

paint cleaner, acetone-containing

solutions etc.), acidic or highly

alkaline media or abrasive pads. Do

not apply wax or polishing agents to

the glass panel.

Wheels and tyres

Do not use high-pressure jet

cleaners.

Clean rims with a pH-neutral wheel

cleaner.

Rims are painted and can be treated

with the same agents as the body.

Paintwork damage

Rectify minor paintwork damage with

a touch-up pen before rust forms.

Have more extensive damage or rust

areas repaired by a workshop.

Underbody

Some areas of the vehicle underbody

have a PVC undercoating while other

critical areas have a durable

protective wax coating.

After the underbody is washed, check

the underbody and have it waxed if

necessary.

Bitumen/rubber materials could

damage the PVC coating. Have

underbody work carried out by a

workshop.

Before and after winter, wash the

underbody and have the protective

wax coating checked.

Natural gas system

Do not direct the steam jet or high-

pressure jet towards natural gas

system components. It is particularly

important to protect the natural gas

tank and the pressure valves on the

vehicle underbody and the bulkhead

in the engine compartment.

These components must not be

treated using chemical cleaners or

preservatives.

Have components of the natural gas

system cleaned by a workshop

authorised to carry out maintenance

of natural gas vehicles.

Towing equipment

Do not clean the coupling ball bar with

a steam-jet or high-pressure jet

cleaner.

Interior care

Interior and upholstery

Only clean the vehicle interior,

including the instrument panel fascia

and panelling, with a dry cloth or

interior cleaner.

Vehicle care 157

Clean the leather upholstery with

clear water and a soft cloth. In case of

heavy soiling, use leather care.

The instrument cluster and the

displays should only be cleaned using

a soft damp cloth. If necessary, use a

weak soap solution.

Clean fabric upholstery with a

vacuum cleaner and brush. Remove

stains with an upholstery cleaner.

Clothing fabrics may not be

colourfast. This could cause visible

discolourations, especially on light-

coloured upholstery. Removable

stains and discolourations should be

cleaned as soon as possible.

Clean seat belts with lukewarm water

or interior cleaner.

Caution

Close Velcro fasteners as open

Velcro fasteners on clothing could

damage seat upholstery.

The same applies to clothing with

sharp-edged objects, like zips or

belts or studded jeans.

Plastic and rubber parts

Plastic and rubber parts can be

cleaned with the same cleaner as

used to clean the body. Use interior

cleaner if necessary. Do not use any

other agent. Avoid solvents and petrol

in particular. Do not use high-

pressure jet cleaners.

158 Service and maintenance

Service and

maintenance

General information ................... 158

Recommended fluids, lubricants

and parts .................................... 159

General information

Service information

In order to ensure economical and

safe vehicle operation and to

maintain the value of your vehicle, it

is of vital importance that all

maintenance work is carried out at the

proper intervals as specified.

The detailed, up-to-date service

schedule for your vehicle is available

at the workshop.

Service display 3 70.

Service intervals - petrol and

CNG engines

Maintenance of your vehicle is

required every 18,000 miles or

2 years, whichever occurs first.

Service intervals - diesel

engines

Maintenance of your vehicle is

required every 21,000 miles or

2 years, whichever occurs first,

unless otherwise indicated in the

Driver Information Centre.

Confirmations

Confirmation of service is recorded in

the Service and Warranty Booklet.

The date and mileage is completed

with the stamp and signature of the

servicing workshop.

Make sure that the Service and

Warranty Booklet is completed

correctly as continuous proof of

service is essential if any warranty or

goodwill claims are to be met, and is

also a benefit when selling the

vehicle.

Service interval with remaining

engine oil life duration

The service interval is based on

several parameters depending on

usage.

When the engine oil requires

changing, control indicator I will

flash in conjunction with a message in

the Driver Information Centre 3 77.

Service display 3 70.

Service and maintenance 159

Recommended fluids,

lubricants and parts

Recommended fluids and

lubricants

Only use products that meet the

recommended specifications.

Damage resulting from the use of

products not in line with these

specifications will not be covered by

the warranty.

9 Warning

Operating materials are

hazardous and could be

poisonous. Handle with care. Pay

attention to information given on

the containers.

Engine oil

Engine oil is identified by its quality

and its viscosity. Quality is more

important than viscosity when

selecting which engine oil to use. The

oil quality ensures e.g. engine

cleanliness, wear protection and oil

ageing control, whereas viscosity

grade gives information on the oil's

thickness over a temperature range.

Dexos is the newest engine oil quality

that provides optimum protection for

petrol and diesel engines. If it is

unavailable, engine oils of other listed

qualities must be used.

Recommendations for petrol engines

are also valid for Compressed Natural

Gas (CNG) fuelled engines.

Select the appropriate engine oil

based on its quality and viscosity

3 162.

Topping up engine oil

Engine oils of different manufacturers

and brands can be mixed as long as

they comply with the required engine

oil quality and viscosity.

Use of engine oil with only

ACEA A1/B1 or only A5/B5 quality is

prohibited, since it can cause long-

term engine damage under certain

operating conditions.

Select the appropriate engine oil

based on its quality and viscosity

3 162.

Additional engine oil additives

The use of additional engine oil

additives could cause damage and

invalidate the warranty.

Engine oil viscosity

The SAE viscosity grade gives

information on the thickness of the oil.

Multigrade oil is indicated by two

figures, e.g. SAE 5W-30. The first

figure, followed by a W, indicates the

low temperature viscosity and the

second figure the high temperature

viscosity.

Select the appropriate viscosity grade

3 162.

All of the recommended viscosity

grades are suitable for high ambient

temperatures.

Coolant and antifreeze

Use only antifreeze approved for the

vehicle. Consult a workshop.

The system is factory filled with

coolant designed for excellent

corrosion protection and frost

protection down to approx. -28 °C. In

northern countries with very low

160 Service and maintenance

temperatures the factory filled coolant

provides frost protection down to

approx. -37°C. This concentration

should be maintained all year round.

The use of additional coolant

additives that intend to give additional

corrosion protection or seal against

minor leaks can cause function

problems. Liability for consequences

resulting from the use of additional

coolant additives will be rejected.

Brake and clutch fluid

Only use high-performance DOT 4+

brake fluid approved for the vehicle.

Consult a workshop.

Over time, brake fluid absorbs

moisture which will reduce braking

effectiveness. The brake fluid should

therefore be replaced at the specified

interval.

Brake fluid should be stored in a

sealed container to avoid water

absorption.

Ensure brake fluid does not become

contaminated.

Technical data 161

Technical data

Vehicle identification .................. 161

Vehicle data ............................... 162

Vehicle identification

Vehicle Identification

Number

The Vehicle Identification Number is

visible through the windscreen

and in the floor on the front passenger

side behind a cover.

Identification plate

The identification plate is in the

engine compartment.

162 Technical data

Information on identification label:

1 = Type approval number

2 = Vehicle Identification

Number

3 = Vehicle type identification

code

4 = Permissible gross vehicle

weight rating in kg

5 = Permissible gross train

weight in kg

6 = Maximum permissible front

axle load in kg

7 = Maximum permissible rear

axle load in kg

8 = Engine type

9-11 = Vehicle-specific or country-

specific data

The combined total of front and rear

axle loads must not exceed the

permissible gross vehicle weight. For

example, if the front axle is bearing its

maximum permissible load, the rear

axle can only bear a load that is equal

to the gross vehicle weight minus the

front axle load.

The technical data is determined in

accordance with European

Community standards. We reserve

the right to make modifications.

Specifications in the vehicle

documents always have priority over

those given in this manual.

Vehicle data

Recommended fluids and

lubricants

Required engine oil quality

Engine oil

quality

Petrol /

CNG

engines

Diesel

engines

dexos 2 ✔ ✔

In case dexos quality is unavailable in

International countries you may use

the oil qualities listed below:

Engine oil

quality

Petrol /

CNG

engines

Diesel

engines

GM-LL-

A-025

✔ -

GM-LL-

B-025

- ✔

Technical data 163

Engine oil viscosity grades

Engine oil

viscosity

grade

Petrol /

CNG

engines

Diesel

engines

SAE 0W-30 - ✔

SAE 0W-40 ✔ -

164 Technical data

Engine data

Sales designation 1.4 1.4 1.4

Engine identifier code 1.4i 1.4Turbo 1.4CNG

Number of cylinders 4 4 4

Piston displacement [cm

]

1368 1368 1368

Engine power [kW] 70 88 88

at rpm 6000 5000 5000

Torque [Nm] 127 206 206

at rpm 4500 3000 3000

Fuel type Petrol Petrol Compressed Natural Gas/Petrol

Octane rating RON

recommended 95 95 95

possible 98 98 98

possible 91 91 91

Gas – – CNG

Oil consumption [l/1000 km] 0.6 0.6 0.6

Technical data 165

Sales designation 1.3 Turbo 1.6 Turbo 2.0 Turbo

Engine identifier code

1.3CDTI

1.6CDTI

2.0CDTI

Number of cylinders 4 4 4

Piston displacement [cm

]

1248 1598 1956

Engine power [kW] 66 66 / 77 99

at rpm 4000 4000 3500

Torque [Nm] 200

200

/ 290

320

at rpm 1500 1500 1500

Fuel type Diesel Diesel Diesel

Oil consumption [l/1000 km] 0.6 0.6 0.6

Low / High output.

Vehicles with manual transmission automated (MTA).

166 Technical data

Performance

The maximum speed indicated is achievable at kerb weight (without driver) plus 200 kg payload. Optional equipment could

reduce the specified maximum speed of the vehicle.

Engine 1.4i 1.4Turbo 1.4CNG

Maximum speed [mph]

Manual transmission 100 107 107

Manual transmission automated – – –

Engine 1.3CDTI 1.6CDTI

2.0CDTI

Maximum speed [mph]

Manual transmission

98 / 95

102 / 98

/ 95

111

Manual transmission automated

– / – – / 98

/ 95

–

Low / High output.

High roof version.

Low roof version.

Technical data 167

Vehicle weight

Kerb weight, basic model - Van

Length Roof height Engine Gross vehicle weight Kerb weight

L1 H1 1.4i 1990 / 2160 1240 / 1260

1.4Turbo – / 2325 – / 1400

1.4Turbo CNG 2430 / – 1450 / –

1.3CDTI 2020 / 2290 1270 / 1290

1.6CDTI 2060 / 2330 1310 / 1330

2.0CDTI 2100 / 2370 1350 / 1370

H2 1.4i 2010 / 2180 1260 / 1280

1.4Turbo – / 2345 – / 1420

1.4Turbo CNG 2420 / – 1470 / –

1.6CDTI 2080 / 2350 1330 / 1350

2.0CDTI 2120 / 2390 1370 / 1390

168 Technical data

Length Roof height Engine Gross vehicle weight Kerb weight

L2 H1 1.4i 2200 / – 1300 / –

1.4Turbo 2365 / – 1440 / –

1.4Turbo CNG 2470 / 2450 1490 / 1540

1.3CDTI 2330 / – 1330 / –

1.6CDTI 2370 / – 1370 / –

2.0CDTI 2410 / – 1410 / –

H2 1.4Turbo 2455 1455

1.6CDTI 2460 1460

2.0CDTI 2500 1500

Technical data 169

Kerb weight, basic model - Combi

Length Roof height Engine Gross vehicle weight Kerb weight

L1 H1 1.4i 2060 1350

1.4Turbo 2225 1500

1.3CDTI 2090 1380

1.6CDTI 2130 1420

2.0CDTI 2170 1460

H2 1.4i 2160 1360

1.3CDTI 2190 1390

1.6CDTI 2230 1430

2.0CDTI 2270 1470

L2 H1 1.4i 2200 1400

1.4Turbo 2265 1540

1.3CDTI 2230 1430

1.6CDTI 2270 1470

2.0CDTI 2310 1510

H2 2.0CDTI 2400 1600

170 Technical data

Kerb weight, basic model - Combo Tour

Length Roof height Engine Gross vehicle weight Kerb weight

L1 H1 1.4i 1940 1340

1.4Turbo 2030 1490

1.4Turbo CNG 2110 1540

1.3CDTI 1970 1370

1.6CDTI 2010 1410

2.0CDTI 2050 1450

H2 1.4i 2210 1430

1.6CDTI 2400 1500

2.0CDTI 2440 1540

L2 H1 1.4i 2055 1370

1.4Turbo 2135 1490

1.3CDTI 2085 1400

1.6CDTI 2115 1430

2.0CDTI 2165 1480

H2 2.0CDTI 2215 1600

Technical data 171

Vehicle dimensions

Type Van Combi Combo Tour

Wheelbase Short Long Short Long Short Long

Length [mm] 4390 4740 4390 4740 4390 4740

Width without exterior mirrors [mm] 1832 1832 1832 1832 1832 1832

Width with exterior mirrors [mm] 2119 2119 2119 2119 2119 2119

Height (without antenna) [mm]

Standard roof

1845 / 1895

1880 / 1927

1845 / 1895

1880 / 1927

1845 / 1895

1880 / 1927

High roof 2100 – 2100 – 2100 –

Length of load compartment floor

[mm]

1820 2170 – – – –

Load compartment width [mm] 1230 1230 1230 1230 1195 1195

Load compartment height [mm]

Standard roof

1305 1305 1305 1305 1305 1305

High roof 1550 – 1550 – 1550 –

Versions with roof rack.

Versions with roof bars.

172 Technical data

Type Van Combi Combo Tour

Wheelbase [mm] 2755 3105 2755 3105 2755 3105

Turning circle kerb to kerb [m] 11.2 12.5 11.2 12.5 11.2 12.5

Technical data 173

Capacities

Engine oil

Engine 1.4i 1.4Turbo 1.4CNG 1.3CDTI 1.6CDTI 2.0CDTI

including Filter [l] 2.7 2.9 2.9 3.2 4.9 4.9

between MIN and MAX [l] 1.0 1.0 1.0 1.0 1.0 1.0

Fuel tank

Petrol/diesel, nominal capacity [l] 60

Natural gas CNG, nominal capacity [kg]

Petrol, nominal capacity [l]

16.15 kg

/ 22.1 kg

Short wheelbase version.

Long wheelbase version.

174 Technical data

Tyre pressures

Van

Comfort with up to 2 people and 100 kg luggage With full load

Engine Tyres front rear front rear

[kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi])

All 185/65 R15 88T 250/2.5 (36) 250/2.5 (36) 290/2.9 (42) 290/2.9 (42)

185/65 R15 92T 250/2.5 (36) 260/2.6 (38) 290/2.9 (42) 300/3.0 (44)

195/65 R15 95T 240/2.4 (35) 240/2.4 (35) 260/2.6 (38) 270/2.7 (39)

195/60 R16 C 99/97T 270/2.7 (39) 270/2.7 (39) 270/2.7 (39) 330/3.3 (48)

360/3.6 (52)

10)11)

Adjust tyre pressure to the value specified for full load when driving at speeds of 100 mph.

10)

Long wheelbase version.

11)

CNG version.

Technical data 175

Combi

Comfort with up to 3 people With full load

Engine Tyres front rear front rear

[kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi])

All 185/65 R15 88T 250/2.5 (36) 250/2.5 (36) 290/2.9 (42) 290/2.9 (42)

185/65 R15 92T 250/2.5 (36) 260/2.6 (38) 290/2.9 (42) 300/3.0 (44)

195/65 R15 95T 240/2.4 (35) 300/3.0 (44) 260/2.6 (38) 320/3.2 (46)

195/60 R16 C 99/97T 270/2.7 (39) 270/2.7 (39) 270/2.7 (39) 360/3.6 (52)

Adjust tyre pressure to the value specified for full load when driving at speeds of 100 mph.

176 Technical data

Combo Tour

Comfort with up to 3 people With full load

Engine Tyres front rear front rear

[kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi]) [kPa/bar] ([psi])

All 185/65 R15 88T 250/2.5 (36) 250/2.5 (36) 290/2.9 (42) 290/2.9 (42)

185/65 R15 92T 250/2.5 (36) 260/2.6 (38) 290/2.9 (42) 300/3.0 (44)

195/65 R15 95T 240/2.4 (35) 240/2.4 (35) 260/2.6 (38) 260/2.6 (38)

195/60 R16 C 99/97T 270/2.7 (39) 270/2.7 (39) 270/2.7 (39)

280/2.8 (41)

12)

360/3.6 (52)

13)11)

Adjust tyre pressure to the value specified for full load when driving at speeds of 100 mph.

12)

Version with 5 seats.

13)

Version with 7 seats.

11)

CNG version.

Customer information 177

Customer information

Vehicle data recording and pri‐

vacy ........................................... 177

Vehicle data recording

and privacy

Event data recorders

Data storage modules in the

vehicle

A large number of electronic

components of your vehicle contain

data storage modules temporarily or

permanently storing technical data

about the condition of the vehicle,

events and errors. In general, this

technical information documents the

condition of parts, modules, systems

or the environment:

■ Operating conditions of system

components (e.g. filling levels)

■ Status messages of the vehicle and

its single components (e.g. number

of wheel revolutions / rotational

speed, deceleration, lateral

acceleration)

■ Dysfunctions and defects in

important system components

■ Vehicle reactions in particular

driving situations (e.g. inflation of

an airbag, activation of the stability

regulation system)

■ Environmental conditions (e.g.

temperature)

This data is exclusively technical and

helps identifying and correcting errors

as well as optimizing vehicle

functions.

Motion profiles indicating travelled

routes cannot be created with this

data.

If services are used (e.g. repair

works, service processes, warranty

cases, quality assurance),

employees of the service network

(manufacturer included) are able to

read out this technical information

from the event and error data storage

modules applying special diagnostic

devices. If required, you will receive

further information at these

workshops. After an error has been

corrected, the data is deleted from the

error storage module or it is

constantly overwritten.

178 Customer information

When using the vehicle, situations

may occur in which technical data

related to other information (accident

report, damages on the vehicle,

witness statements etc.) may be

associated with a specific person -

possibly, with the assistance of an

expert.

Additional functions contractually

agreed upon with the client (e.g.

vehicle location in emergency cases)

allow the transmission of particular

vehicle data from the vehicle.

Radio Frequency

Identification (RFID)

RFID technology is used in some

vehicles for functions such as ignition

system security. It is also used in

connection with conveniences such

as radio remote controls for door

locking/unlocking and starting, and in-

vehicle transmitters for garage door

openers. RFID technology in

Vauxhall vehicles does not use or

record personal information or link

with any other Vauxhall system

containing personal information.

Customer information 179

180

Index

Accessories and vehicle

modifications .......................... 125

Adjustable air vents ..................... 99

Airbag activation........................... 79

Airbag and belt tensioners ........... 73

Airbag deactivation .......... 45, 74, 79

Airbag system .............................. 41

Air conditioning regular

operation ................................ 100

Air conditioning system ................ 96

Air intake .................................... 100

Air vents........................................ 99

Alert.............................................. 85

Antilock brake system ................ 112

Antilock brake system (ABS) ....... 75

Anti-Slip Regulator (ASR)........... 113

Anti-theft locking system .............. 26

Appearance care........................ 155

Armrest......................................... 35

Ashtrays ....................................... 67

ASR (Anti-Slip Regulator)........... 113

Audible warning chimes................ 85

Autoclose...................................... 79

Automatic fuel cut-off............ 85, 103

Automatic locking......................... 79

Battery ....................................... 130

Battery discharge protection ........ 94

Belts.............................................. 38

Bonnet ....................................... 127

Brake and clutch fluid................. 159

Brake assist ............................... 113

Brake fluid .................................. 130

Brake pad wear............................ 75

Brakes ............................... 112, 130

Brake system ............................... 74

Breakdown.................................. 153

Bulb replacement ....................... 132

Capacities .................................. 173

Car Pass ...................................... 19

Catalytic converter ..................... 107

Central locking system ................ 21

Centre high-mounted brake light 135

Change engine oil ....................... 77

Changing tyre and wheel size ...144

Charging system .......................... 74

Child locks ................................... 22

Child restraint installation

locations ................................... 49

Child restraints.............................. 47

Child restraint systems ................ 47

181

Child safety system for rear

windows.................................... 29

Chimes......................................... 85

Cigarette lighter ........................... 66

Climate control ............................. 14

Climate control systems............... 95

Clock....................................... 63, 79

Control indicators.......................... 70

Control of the vehicle ................. 101

Controls........................................ 61

Convex shape .............................. 27

Coolant and antifreeze............... 159

Cruise control ...................... 79, 115

Cupholders .................................. 54

Danger, Warnings and Cautions ...3

Date.............................................. 79

Daytime running lights............ 79, 89

Diesel particle filter............... 76, 106

Distance to next service............... 79

Door open .................................... 79

Doors...................................... 23, 25

Drain fuel filter ............................. 78

Driver Information Centre............. 79

Driving characteristics and

towing tips .............................. 123

Driving hints................................ 101

Eco mode (E).............................. 111

Electric adjustment ...................... 27

Electrical system......................... 138

Electronic climate control system 97

Electronic driving programmes ..111

Electronic Stability Program 76, 114

End-of-life vehicle recovery ....... 126

Engine compartment fuse box ... 139

Engine coolant ........................... 128

Engine coolant temperature ........ 76

Engine coolant temperature

gauge ....................................... 69

Engine data ............................... 164

Engine exhaust .......................... 106

Engine oil ................... 127, 159, 162

Engine oil pressure ...................... 77

ESP (Electronic Stability

Program)................................. 114

Event data recorders.................. 177

Extendable load compartment

cover................................... 55, 59

Exterior care .............................. 155

Exterior light ................................. 78

Exterior lighting ...................... 11, 88

Exterior mirrors............................. 27

Fault ........................................... 111

Fixed air vents ........................... 100

Fog light ....................................... 79

Folding ......................................... 28

Folding seats................................ 55

Front airbag system ..................... 44

Front fog lights ............................. 90

Front seats.................................... 33

Front turn signal light.................. 132

Fuel............................................. 118

Fuel consumption......................... 79

Fuel consumption - CO

Emissions ............................... 122

Fuel cut-off system............... 85, 103

Fuel for diesel engines .............. 119

Fuel for natural gas operation ...119

Fuel for petrol engines ............... 118

Fuel gauge ................................... 68

Fuel selector ................................ 69

Fuel system messages................. 85

Fuses ......................................... 138

Gauges......................................... 67

General information ................... 123

Generic warning........................... 73

Glovebox ..................................... 54

Gross Vehicle Weight................... 59

182

Halogen headlights .................... 132

Hand brake................................. 112

Hazard warning flashers .............. 90

Headlight flash ............................. 88

Headlight range adjustment ........ 89

Headlights..................................... 88

Headlights when driving abroad ..89

Head restraint adjustment ............. 8

Head restraints ............................ 32

Heated mirrors ............................. 28

Heated rear window ..................... 31

Heating ........................................ 35

Heating and ventilation system ...95

High beam ............................. 79, 88

Hill start assist...................... 75, 113

Horn ....................................... 13, 62

Identification plate ..................... 161

Ignition switch positions ............. 102

Immobiliser ............................ 26, 78

Indicators...................................... 67

Information displays...................... 79

Instrument cluster ........................ 67

Instrument panel fuse box ......... 140

Instrument panel illumination ..... 138

Instrument panel illumination

control ...................................... 91

Instrument panel overview ........... 10

Instrument panel storage.............. 53

Interior care ............................... 156

Interior lighting........................ 79, 91

Interior lights ........................ 92, 137

Interior mirrors.............................. 28

Introduction .................................... 3

ISOFIX child restraint systems .... 52

Jump starting ............................. 152

Kerb weight................................... 59

Keys ............................................. 19

Keys, locks................................... 19

Language..................................... 79

Lashing eyes ......................... 58, 59

Light switch .................................. 88

Load compartment ................ 25, 55

Load compartment cover ............. 55

Load compartment lighting........... 93

Loading......................................... 55

Loading information ..................... 59

Low engine oil level ..................... 78

Low fuel ....................................... 78

Malfunction indicator light ............ 74

Manual adjustment ...................... 27

Manual anti-dazzle ...................... 28

Manual mode ............................. 110

Manual transmission .................. 107

Manual transmission automated 108

Manual windows .......................... 29

Mirror adjustment ........................... 8

Misted light covers ....................... 91

Multifunction display..................... 79

New vehicle running-in .............. 101

Number plate light ..................... 136

Object detection systems........... 116

Odometer ..................................... 67

Oil, engine.......................... 159, 162

Operating windows from outside..29

Outside temperature .................... 63

Overhead console ....................... 54

Overrun cut-off ........................... 103

Parking ................................ 17, 105

Parking assist ............................ 116

Parking brake ............................ 112

Particulate filter........................... 106

183

Payload......................................... 59

Performance .............................. 166

Performing work ........................ 126

Pollen filter ................................. 100

Power outlets ............................... 65

Power steering fluid.................... 129

Power windows ............................ 29

Preheating ................................... 76

Puncture..................................... 147

Radio Frequency Identification

(RFID)..................................... 178

Radio info..................................... 79

Radio remote control ................... 20

Rear doors ................................... 23

Rear fog light ............................... 79

Rear fog lights ............................. 91

Rear parcel shelf.......................... 55

Rear seats ............................. 36, 55

Rear windows .............................. 31

Rear window wiper/washer .......... 63

Recommended fluids and

lubricants ........................ 159, 162

Refuelling ................................... 120

Reversing lights ........................... 91

Ride control systems.......... 113, 114

Roof load...................................... 59

Roof rack ..................................... 58

Roof racks.................................... 59

Safety belts................................... 38

Seat adjustment ....................... 7, 33

Seat belt ........................................ 8

Seat belt reminder ....................... 73

Seat belt reminder warning chime 79

Seat belts ..................................... 38

Seat position ................................ 33

Selector lever ............................. 109

Service ............................... 100, 158

Service display ...................... 70, 79

Service information .................... 158

Settings menu............................... 79

Side airbag system ...................... 45

Sidelights...................................... 88

Side turn signal lights ................ 135

Sliding door .................................. 23

Sliding side door........................... 23

Spare wheel ............................... 149

Speed limit warning chime............ 79

Speedometer ............................... 67

Standard display........................... 79

Starting and operating................ 101

Starting off ................................... 16

Starting the engine ............ 102, 108

Steering wheel adjustment ...... 9, 61

Steering wheel controls ............... 61

Stop-start system.................. 78, 103

Storage......................................... 53

Storage compartments................. 53

Sun visors .................................... 31

Symbols ......................................... 4

Tachometer ................................. 68

Tailgate......................................... 25

Tail lights ................................... 134

Temperature................................. 79

Three-point seat belt .................... 39

Tools .......................................... 142

Top-tether fastening eyes ............ 52

Towing................................ 123, 153

Towing another vehicle ............. 154

Towing the vehicle ..................... 153

Traction Control system ............. 113

Trailer coupling........................... 123

Trailer towing ............................. 123

Transmission ............................... 15

Transmission display ................. 108

Tread depth ............................... 143

Trip computer......................... 79, 86

Trip odometer .............................. 67

Turn and lane-change signals ..... 90

Turn signal ................................... 73

Tyre chains ................................ 144

Tyre designations ...................... 143

Tyre pressure ............................ 143

Tyre pressures ........................... 174

Tyre repair kit ............................. 145

184

Ultrasonic parking assist ...... 75, 116

Underseat storage ....................... 54

Unit of measurement.................... 79

Upholstery.................................. 156

Upshift.......................................... 75

Using this manual .......................... 3

Vehicle checks............................ 126

Vehicle data................................ 162

Vehicle data recording and

privacy..................................... 177

Vehicle dimensions .................... 171

Vehicle Identification Number .... 161

Vehicle jack................................ 142

Vehicle security............................ 26

Vehicle shutdown................. 85, 103

Vehicle specific data ...................... 3

Vehicle storage........................... 125

Vehicle tools............................... 142

Vehicle unlocking ........................... 6

Vehicle weight ........................... 167

Ventilation..................................... 95

Volume......................................... 79

Warning chime.............................. 79

Warning chimes ........................... 85

Warning lights............................... 67

Washer and wiper systems ......... 13

Washer fluid ............................... 129

Wheel changing ......................... 147

Wheel covers ............................. 144

Wheels and tyres ....................... 142

Windows....................................... 29

Windscreen................................... 29

Windscreen wiper/washer ........... 62

Winter tyres ............................... 142

Wiper blade replacement .......... 131

Vauxhall Combo 2013 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Vauxhall Combo 2013

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info