529272
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Vehicle features
Ampera
Quick Reference Guide
Refer to Owner’s Manual for detailed information.
Illustrations may depict left-hand drive vehicles.
Operation is similar for right-hand drive vehicles.
Depending on the model variant, special equipment
and accessories, the scope of equipment on your
vehicle may differ from the descriptions in this guide.
KTA-2727/3 August 2013
*KTA-2727-3*
Vehicle features Vehicle features
Unlocking the vehicle:
Press button ( once to unlock
driver’s door.
To unlock all doors and load
compartment, press button (
twice.
Unlocking with Open & Start:
With remote control in range, press
lock/unlock button on door handle
to unlock driver’s door. Press again
within 5 seconds to unlock all
doors.
The vehicle may also be configured
to unlock all doors with one press of
button ( or the lock/unlock button.
Locking the vehicle:
Press button ) on remote control
with doors closed.
Locking with Open & Start:
Providing the lock/unlock button
was used to unlock, it can also be
used to lock the vehicle.
Deadlocking, activating alarm
Press ) or the lock/unlock button
twice within 5 seconds to deadlock
doors and activate alarm.
Electronic immobiliser:
Activated automatically after
ignition is switched off.
1. Cruise control,
Lane departure warning,
Forward collision alert
2. Light switch,
Turn and lane-change signals,
Pedestrian safety alert
3. Horn
4. Instrument cluster,
Driver Information Centre (DIC)
5. Steering wheel controls
6. Windscreen wiper/washer
7. Centre air vents
8. Interior lights, Parking assist,
Anti-theft alarm system,
Electronic Stability Control,
Traction Control system,
Seat belt reminder,
Airbag deactivation indicator
9. Interior mirror
10. Charging status indicator
11. Light sensor, Climate sensor
12. Instrument panel storage
13. Colour-Info-Display
14. Side air vents
15. Glovebox
16. Central locking buttons
17. Electrical parking brake
18. Infotainment system
19. Shift lever
20. Power button
21. Drive mode button
22. Leaf button
23. Bonnet release lever
24. Steering wheel adjustment
25. Instrument panel illumination
26. Charge port door release
button
27. Power windows
28. Fuel door release button
29. Driver Information Centre
(DIC) controls
30. Headlight range adjustment
Electric drive unit:
P = Park position.
Front wheels are locked,
engage only when vehicle
is stationary and the
parking brake is applied
R = Reverse gear.
Engage only when vehicle is
stationary
N = Neutral
D = Drive mode
L = Low.
Vehicle speed is reduced
without using brakes. Use for
steep hills, deep snow or mud
To move out of P, switch ignition
on, depress brake pedal and press
selector lever button.
Electric vehicle operation modes:
In electric mode, the vehicle is
powered by electrical energy
stored in the battery.
In extended range mode, when the
stored electrical energy is
exhausted, electricity is produced
by the fuel-powered engine.
Drive modes:
The following drive modes can also
be selected from the display by
pressing the DRIVE MODE button:
Sport (for more responsive
acceleration)
Mountain (for steep hills etc.
Select mode 20 minutes before
driving on steep grades to build
reserve battery charge)
Hold (select during Electric
mode to reserve battery charge.
Vehicle switches to Extended
range mode)
Release button when desired mode
is highlighted to activate mode.
Press button again to return to
Normal mode.
Starting the vehicle:
Move selector lever to P or N.
The propulsion system will not
start in any other position.
Move steering wheel slightly to
release steering wheel lock.
Remote control must be inside
the vehicle.
(A display message will appear
if the remote control is not
detected).
Depress brake pedal.
Press power button m to switch
on ignition; LED illuminates.
When R illuminates,
the vehicle is ready to be driven.
Press power button
m to switch off
ignition; LED extinguishes. Selector
lever must be in position P.
Charging:
The battery can only be charged
when the vehicle is stationary.
Start charge:
1. Push in the rearward edge of the
charge port door and release to
open the door.
Start charge (continued):
2. Open tailgate, lift the floor
cover and remove the
charge cord, located next to
tyre repair kit.
3. Pull up charge cord handle
to release it from the clip.
4. Lift charge cord up and towards
rear to remove from vehicle.
Vehicle plug is stored as
shown in the illustration.
5. Plug charge cord into electrical
outlet.
6. Select charge level using the
Select Charge Level Preference
screen on Colour-Info-Display.
End charge (continued):
5. Before storing the charge cord,
ensure it is facing upwards and
then wrap the charge cable
anti-clockwise around the body
of the charge cord.
Start charge (continued):
7. Insert the vehicle plug end of the
charge cord into the vehicle’s
charge port.
8. Check that the charging status
indicator on top of the
instrument panel illuminates
and a horn chirp occurs.
9. Lock the vehicle with the remote
control to arm the charge cord
theft alert system.
End charge:
1. Unlock the vehicle with the
remote control to disarm the
charge cord theft alert system.
2. Remove the vehicle plug end of
the charge cord from the vehicle.
3. Close charge port door by
pressing firmly on the rearward
edge of the door surface.
4. Unplug charge cord from
electrical outlet.
End charge (continued):
6. Place the charge cord into the
storage compartment.
Programmed charging override:
To temporarily override a delayed
charge event, unplug the charge
cord from the charge port and plug
it back in within 5 seconds. A single
horn chirp will sound and charging
will begin immediately.
To cancel a temporary override,
unplug the charge cord from the
charge port and wait for
10 seconds, then plug the charge
cord back in. A double horn chirp
will sound and charging will be
delayed.
Charging status:
The vehicle has a charging status
indicator at the centre of the
instrument panel, near the
windscreen.
When the vehicle is plugged in and
the vehicle power is off, the
charging status indicator denotes
the following:
Green (solid) -
one horn chirp:
Vehicle plugged in, battery
charging.
Green (solid or long flashing) - 4
horn chirps:
Insufficient time to fully charge
before departure time.
Green (long flashing) -
2 horn chirps:
Vehicle plugged in, battery
charging is delayed.
Charging status (continued):
Green (short flashing) -
No horn chirp:
Vehicle plugged in, battery fully
charged.
Yellow (solid) -
no horn chirp:
Vehicle plugged in.
If indicator remains yellow, a
malfunction has occurred.
No light signal or horn chirp
(upon plug-in):
Check charge cord connection.
No light signal or horn chirp
(after green or yellow appears):
Check charge cord connection.
No light signal -
repeated horn chirps:
Charging interrupted. Unplug
charge cord or press button (
on remote control to stop this
alert.
The system may be thermally
conditioning the battery during
any of the above states, requiring
electrical energy to be transferred
to the vehicle.
If the vehicle is plugged in and the
power is on, the charging status
indicator will be a solid green.
If the vehicle is plugged in and the
charging status indicator is off, a
charging fault has been detected.
If a faulty connection is not the
cause, consult a workshop.
Tyre pressure:
Check tyre pressures, including the spare, every 14 days and prior to any long journey; tyres should be
checked when cold. This also applies to vehicles with tyre pressure monitoring system.
The tyre pressure data refers to cold tyres. It applies to summer and winter tyres.
The ECO tyre pressure serves to achieve the smallest amount of fuel consumption possible.
Tyre pressure (psi)
Comfort setting for upto
3 people:
Engine
Tyres Front Rear
All 215/55 R17 35 35
205/60 R16 38 38
Tyre pressure (psi)
With full load
Engine
Tyres Front Rear
All 215/55 R17 36 42
205/60 R16 39 45
Tyre pressure (psi)
ECO setting for upto
3 people
Engine
Tyres Front Rear
All 215/55 R17 39 39
205/60 R16 41 41
Charge cord:
A portable charge cord used to
charge the vehicle battery is stored
under the floor covering in the load
compartment.
Important information for
portable electric vehicle charging:
Charging an electric vehicle can
stress an electrical system more
than a typical household
appliance.
Before plugging into an
electrical outlet, have a qualified
electrician inspect and verify the
electrical system for heavy-duty
service at a 10 Ampere
continuous load.
Electrical outlets may wear out
with normal usage or become
damaged over time, making
them unsuitable for electric
vehicle charging.
Check the electrical outlet/plug
while charging. Discontinue use
if hot and have outlet serviced
by a qualified electrician.
Danger:
Improper use of portable electric
vehicle charge cords may cause a
fire, electrical shock or burns, and
may result in damage to property,
serious injury or death.
Do not use an electrical socket that
is worn or damaged, not properly
grounded, one that is on a circuit
with other electrical loads, or one
that will not hold the plug firmly in
place.
Do not use extension leads, multi-
outlet power strips, splitters,
grounding adaptors, surge
protectors or similar devices.
Charge level selection:
Charge level selection is made
using the Select Charge Level
Preference screen on the Colour-
Info-Display.
Press button8 on the instrument
panel until Charging is displayed.
The charge level preference should
be configured to match the
electrical current rating for the
AC outlet that the charge cord is
connected to.
The charge level preference
settings are:
Maximum - 10 Amps
Limits AC current to 10 Ampere
Reduced - 6 Amps
Limits AC current to 6 Ampere
By choosing a reduced charge
level, the charging time is
increased.
Warning:
If the capacity of the electrical
circuit or AC socket is unknown,
only use the lowest charge level
until the circuit capacity has been
inspected by a qualified electrician.
Engine oil:
Check engine oil level manually on
a regular basis to prevent damage
to engine. Ensure that the correct
specification of oil is used.
Check with vehicle on a level
surface. Engine must be at
operating temperature and
switched off for at least 5 minutes.
Pull out dipstick, wipe clean, insert
to stop on the handle, pull out and
read engine oil level.
Warning:
The engine oil dipstick handle may
be hot.
Insert dipstick to the stop on the
handle and make half a turn.
When the engine oil level has
dropped to the MIN mark on the
dipstick, top up engine oil.
We recommend the use of the
same grade of engine oil that was
used at the last change.
The engine oil level must not
exceed the MAX mark on the
dipstick.
Important:
It is the owner’s responsibility to
maintain the correct level of an
appropriate quality oil in the
engine.
Do not allow the engine oil level to
drop below the minimum level!
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vauxhall Ampera 2013 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vauxhall Ampera 2013 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Vauxhall Ampera 2013

Vauxhall Ampera 2013 Aanvulling / aanpassing - English - 75 pagina's

Vauxhall Ampera 2013 Gebruiksaanwijzing - English - 203 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info