Handleiding Vauxhall Agila 2006 (pagina 124 van 168) (Engels)

529244

124

Verklein

Vergroot

Pagina terug

1/168

Pagina verder

AGILA

©Copyright by Vauxhall Motors Ltd., England.

Reproduction or translation, in whole or in parts, is not

permitted without prior written consent from Vauxhall Motors

Ltd.

All rights as understood under the copyright laws are explicitly

reserved by Vauxhall Motors Ltd.

All information, illustrations and specifications contained in this

manual are based on the latest production information

available at the time of publication.

The right is reserved to make changes at any time without

notice.

Edition: July 2006.

TS 1525-A-07

AGILA

Operation, Safety and Maintenance

Owner’s Manual

TS1649-A-07.qxd 15/06/2006 07:10 Page 1

VAUXHALL Agila

Owner’s Manual

Data specific to your vehicle

Please enter your vehicle’s data here to keep it ea sily accessible.

This information is available under the section "Technical data" as well as on the vehicle identification plate and in the Service Booklet.

Fuel

Designation

Engine oil

Grade

Viscosity

Tyre pressure

Tyre size Tyre pressure 3 persons with full load

Summer tyres Front Rear Front Rear

Winter tyres Front Rear Front Rear

Weights

Permissible Gross Vehicle Weight

– EC kerbweight

=Loading

Your Agila

Developed in accordance with the latest findings of vehicle research, it offers technical sophistication and exceptional comfort.

Your vehicle represents an intelligent synthesis of advanced technology, outstanding safety, environmental compatibility and

economy in operation.

It now lies with you to drive your vehicle safely and to see it performs perfectly.

This Owner’s Manual provides you with all the necessary information to that end.

Make sure your pa ssengers are awa re of the possible risk of accident and injury which m ay result from improper use of the vehicle.

The Owner’s Manual should always be kept in the vehicle: ready to hand in the glove compartment.

Make use of the Owner’s Manual:

z Its "In brief" section will give you an initial overview.

z The table of contents at the beginning of this owner’s manual

and within the individual chapters will show you where everything is.

z Its index will help you find what you want.

z It will familiarise you with the sophisticated technology.

z It will increase your pleasure in your vehicle.

z It will help you to handle your vehicle expertly.

The Owner’s Manual is designed to be clearly laid-out and easily understood.

This symbol signifies:

6 Continue reading on next page.

3 The asterisk signifies: equipment not fitted to all vehicles

(model variants, engine options, models specific to one country, optional equipment, Genuine Vauxhall Parts and Accessories).

Yellow arrows in the illustrations serve as points of reference or indicate some action to be performed.

Black arrows in the illustrations indicate a reaction or a second action to be performed.

Thank you for choosing a Vauxhall. We wish you many hours of pleasurable driving.

Your Vauxhall Team

9 Warning

Te xt m arked 9 Warning provides information on risk of accident or injury. Disregard of the

instructions may lead to injuries or endanger life.

Inform your passengers accordingly.

Contents

Commitment to customer

satisfaction:

Our aim: to keep you happy with your

vehicle. All Vauxhall Authorised Repairers

offer first class service at competitive

prices. Experienced, factory-trained

technicians work according to factory

instructions.Your Authorised Repairer can

supply you with GENUINE VAU XHALL-

APPROVED PARTS, which have undergone

stringent quality and precision checks, and

of course useful and attractive

VAUXHALL-APPROVED ACCESSORIES.

Our name is your guarantee!

For details of the

Vauxhall Authorised Repairer Network

please ring this number; 01582 - 427200

In Brief ........................................................ 2

Instrum ents ............................................. 18

Keys, Doors, Bonnet ............................... 28

Seats, Interior .......................................... 39

Safety system s ........................................ 50

Lighting ................................................... 66

Windows, Sun roof ................................. 69

Clim ate control ....................................... 72

Driving Hints ........................................... 82

Saving fuel,

Protecting the environment ............... 84

Fuel consumption,

Fuel, Refuelling ................................... 86

Catalytic converter, Exhaust gases ...... 88

Brakes ...................................................... 92

Wheels, Tyres .......................................... 96

Roof racks,

Carava n and trailer towing ............ 102

Self-help ................................................ 106

If you have a problem .......................... 128

Maintenance,

Inspection System ............................. 130

Vehicle care .......................................... 140

Technical Data ..................................... 144

Index ...................................................... 158

2In Brief

In Brief

Key nu mbers,

Code numbers

Remove key number from keys.

The key number is specified in the vehicle

documents and in the Car Pass 3.

Alloy wheels 3: make a note of the key

identifier code.

Electronic immobiliser, infotainment

system 3: The code numb ers are specified

in the Ca r Pass.

Do not keep the Car Pass in the vehicle.

6 Further information – pages 28, 29,

vehicle recommissioning – page 139.

Picture no: 14088h.tif

To unlock the vehicle and

open the doors:

With key in lock

turn key towards front of

vehicleor

press button c on the remote

control 3,

pull door handle and open door

Radio remote control 3: Press button c

once - only driver’s door is unlocked; press

button c twice - all doors are unlocked.

To unlock the doors from inside:

Pull up on lock button.

6 Door locks – page 30,

electronic immobilizer – page 29,

radio remote control 3 – page 31,

central locking system 3 – page 33,

anti-theft locking system 3 – page 33.

3In Brief

Picture no: 13471h.tif

To unlock and open

the luggage compartment:

Turn the key anticlockwise to

horizontal position and back

to the vertical position

Alternatively press button c on the remote

control 3 twice, press button and open

tailgate

6 Mechanical unlocking – page 30,

radio remote control 3 – page 31,

central locking system 3 – page 33,

tailgate – page 30.

Picture no: 13457h.tif

Front seat adjustment:

Pull h andle,

slide seat,

release handle,

audibly engage seat in position

Never adjust the seat while driving. It could

move in an uncontrolled manner when the

handle is pulled.

6 Seat position – page 39,

storage tray under seat 3 – page 46.

Picture no: 13458h.tif

To adjust the front seat

backrest:

Turn the handwheel

Move seat backrest to suit seating position.

Do not lean on seat backrest whilst

adjusting it.

6 Seat position – page 39,

folding the front passenger seat – page 42.

9 Warning

Do not sit nearer than 10 inches (25 cm)

from the steering wheel, to permit safe

airbag deployment.

4In Brief

Picture no: 13459h.tif

To adjust height 3

of front seat:

Pull lever on side

Lift lever and relieve some weight from seat

to raise it or press down on seat with body

weight to lower it.

Never adjust the seat while driving. It could

move in an uncontrolled manner when the

handle is pulled.

6 Seat position – page 39.

Picture no: 15137h.tif

To adjust the height of

front seat head restraints:

Tilt forward to unlock, hold firmly

and adjust height, release

6 adjusting

rear seat head restraints – page 40,

head restraint position – page 39,

head restraint removal – page 39.

Picture no: 12246h.tif

Adjusting interior mirror:

Swivel mirror housing

Swivel lever on underside of mirror housing

to reduce dazzle at night.

9 Warning

Do not sit nearer than 10 inches (25 cm)

from the steering wheel, to permit safe

airbag deployment.

5In Brief

Picture no: 12247h.tif

To adjust exterior mirrors:

Manually - press

edge of relevant

mirror;

Electrically 3 - using four-way

switch in driver’s door

Four-way switch 3: Move rocker switch to

the left or right - the four-way switch

adjusts the corresponding mirror.

The exterior mirrors can be retracted (e.g.

when parking in tight spaces) through

slight pressure on the mirror housing.

Reposition the mirrors before starting off.

6 Further information – page 65.

Picture no: 13461h.tif

Fitting seat belt:

Draw seat belt smoothly from

inertia reel, guide over shoulder

and engage in buckle

The belt must not be twisted at any point.

The lap belt must lie snugly against the

body. The backrest must not be tilted back

too far (recommended tilting angle

approx. 25 °).

To release belt, press red button on belt

buckle.

6 Seat belts – pages 50, 52,

airbag systems 3 – page56,

seat position – page 39.

Picture no: 15678t.tif

Disengaging steering column

lock:

To release the lock,

move the steering wheel slightly

and turn the key to position 1

Positions:

0 = Ignition off

1 = Steering released, ignition off

2 = Ignition on,

Starting – page 15,

electronic immobiliser – page 29.

Remove key and lock steering wheel –

page16.

6In Brief

7In Brief

Page

1 Door window defroster vents ...........73

2 Side air vents .....................................73

3 Front passenger airbag 3 ................57

4 Heating and ventilation system,

air conditioning system 3 ...............72

5 Centre air vents .................................73

6 Haza rd warning lights......................11

7 Display for time, date,

outside temperatures,

infotainment system 3 ....................24

8 Turn signal, headlight flash,

dipped beam, main beam ........ 10, 11

9 Horn ...................................................11

10 Instruments........................................18

11 Windscreen wiper,

windscreen washer system,

rear window washer system 3.........12

12 Fog lights 3 .......................................67

13 Light switch ................................. 10, 66

14 Fog tail light ......................................67

15 Headlight range adjustment 3........67

16 Bonnet release lever .........................37

17 Ignition switch

with steering column lock (hidden) .. 5

18 Accelerator pedal .............................82

19 Brake pedal ......................................92

20 Clutch pedal .....................................83

.......................................................Pa ge

21 Ashtray 3 ......................................... 49

or storage compartment

22 Cigarette lighter 3............................ 49

23 Infotainment sy stem 3 .................... 26

or storage compartment

24 Glove compartment with cover 3 .47

8In Brief

Control indicators

S Engine oil level 3:

see pages 18, 132.

EPS Electronic power steering 3:

see page 18.

A Engine electronics,

immobilizer,

fault

see pages 19, 29, 90.

Z Exhaust emission:

see pages 19, 89.

O Turn signal lights:

see page 19.

C Main beam:

see pages 10, 19, 66.

u Anti-lock brake system 3:

see page 94.

R Brake system:

see pages 20, 136.

p Alternator:

see page 20.

I Engine oil pressure:

see page 21.

Y Fuel level:

see pages 21, 23, 87.

v Airbag systems 3,

belt tensioners:

see pages 51, 60.

Lighting

Li ght switc h,

stalk positions:

see page 66,

7 Lights off,

8 Parking lights,

9 Dipped beam, main beam,

0 Courtesy light:

see page 68.

> Fog lights 3:

see page 67.

r Fog tail light:

see page 67.

C Main beam:

see pages 10, 19, 66.

O Tur n signal lights:

see page 19.

? Headlight range adjustment 3:

see page 67.

¨ Hazard warning lights:

see page 11.

9In Brief

Climate control

x Air flow:

see page 75.

Air distribution:

see page 75,

K to foot well,

J to wind scre en, front

door wind ow s and

foot well,

V to wind scre en and

front door windows,

M to head area above

adjustable air vents,

L to head area above

adjustable air vents

and to foot well.

Ü Heated rear window:

see page 74.

4 Air recirculation system:

see page 74.

5 Outside air intake:

see page 74.

n Air conditioning system 3:

see page 78.

Windscreen wipers

Stalk positions:

see page 12,

§ Off,

$ Timed interval wipe,

% Slow,

& Fast

Date, time, information display,

infotainment system

Triple information display 3:

see page 24,

Ö On button for date

and time

; Setting buttons for date and time

Miscellaneous

e Central locking system

with remote control 3

locking – see page33.

c Central locking system

with remote control 3

unlocking – see page 33.

m Central locking switch 3:

see page 34.

j Horn,

see page 11.

10 In Brief

Picture no: 13462h.tif

Light switch:

7 =Off

8 = Parking lights

9 = Dipped beam or

main beam

Pull 0 =Courtesy light

Press > = Fog lights 3

Press r = Fog tail light

6Further information – page 66,

headlight warning device – page 15,

headlight range adjustment 3 – page 67,

daytime running lights 3 – page 66.

Picture no: 14052h.tif

Main and dipped

beam switch:

Main beam = Push stalk

forward

Dipped beam = Pull stalk

toward steering

wh eel

The blue control indicator C is illuminated

when main beam ison.

Picture no: 14053h.tif

Headlight flash:

Pull stalk towards steering wheel

11In Brief

Picture no: 14054h.tif

Operating turn signal lights:

Lever in rest position

Right turn = Upwards

Left turn = Downwards

When the steering wheel is turned back, the

lever automatically returns to its original

position. This will not happen when making

a minor steering manoeuvre such as

changing lane.

When lane changing, move lever to

resista nce point. When released, the lever

will spring back.

Picture no: 11130H.tif

Hazard warning lights:

On = Press ¨

Off = Press ¨ again

When the button is pressed, its control

indicator flashes in time with the hazard

warning lights.

Picture no: 15140h.tif

Horn operation:

Press j

6 Airbag systems3 – page 56.

12 In Brief

Picture no: 14055h.tif

Windscreen wipers:

Move stalk up

§ = Off

$ = Timed interval wipe

% = Slow

& = Fast

Picture no: 14056h.tif

Operating windscreen washer

system:

Pull stalk towards steering wheel

The wipers will swipe for a few strokes.

6 Further information – page 137.

Picture no: 14057h.tif

To operate rear windo w

wiper and washer systems:

Wiper on = Push stalk

forward

Wiper off = Pull stalk

towards

steering wheel

Washer = Push stalk

forward and

hold

6 Further information – page 137.

13In Brief

Picture no: 11461H.tif

To clear misted o r icy windows:

Turn the rotary switches for

temperature and

quantity of air clockwise,

set air distribution to V

To switch on the

air conditioning 3,

pull temperature switch n

Open side air vents as necessary and direct

them towards the door windows.

6 Climate control – page 72,

air conditioning system 3 – page 78.

Picture no: 11125H.tif

Heated rear window:

On = Pull fan switch Ü

Off = Press fan switchÜ

Switch off as soon as rear vision is clear.

6 Further information – page 74.

14 In Brief

Picture no: 15141h.tif

Manual transmission

Engaging reverse gear on vehicles with

release ring on gear lever: with vehicle

stationary, 3 seconds after depressing the

clutch pedal lift ring, move gear lever to the

left and engage gear.

Engaging reverse gear on vehicles without

release ring on gear lever: with vehicle

stationary, 3 seconds after depressing the

clutch pedal move gear lever to the right

and engage gear.

If the gear does not engage, set the lever in

neutral, release the clutch pedal and

depress again; then repeat gear selection.

Picture no: 16178h.tif

Exhaust gases are poisonous

Exhaust gases contain carbon monoxide,

which is extremely poisonous but is

od ourle ss and colourless.

Therefore never inhale exhaust gases, and

never run the engine in an enclosed space.

Also avoid driving with the luggage

compartment open. Otherwise exhaust

fumes could penetrate the vehicle interior.

Before starting off, check:

z Tyre pressure and condition - see

pages 98, 152.

z Engine oil level and fluid levels in engine

compartment – see pages 131 to 137.

z All windows, mirrors, exterior lighting

and number plates are free from dirt,

snow and ice and operational.

z Do not place any objects in front of the

rear window, on the instrument panel or

in the area in which the airbags inflate.

z Seats, seat belts and mirrors are

correctly adjusted.

z Check brakes.

15In Brief

Picture no: 15582a.tif

To start the engine:

Depress clutch and brake pedals,

do not accelerate,

petrol engine: key to 3;

release key once engine is

running

Before restarting or switching off the

engine, turn key back to 0.

To switch on the ignition, only turn the key

to 2.

6 Electronic immobilizer – page 29, further

information – page 106.

Picture no: 13463h.tif

Releasing the hand brake:

Raise lever slightly,

Press unlock button,

Lower lever fully

And now "Have a good journey!"

Drive carefully, economically and with the

environment in mind. While driving, do not

do anything that could distract you.

Warning buzzers

When the vehicle is parked and the driver’s

door is opened the warning buzzer will

sound if:

z the ignition key is in the ignition switch 3

z parking lights or dipped beam on 3.

16 In Brief

Picture no: 15143h.tif

Parking the vehicle:

Apply handbrake firmly,

engine off,

remove key,

lock steering wheel,

lock vehicle

To lock, turn the key in the lock toward the

rear of the vehicle or press button e on the

remote control. To activate the anti-theft

locking system 3, turn the key toward the

rear of the vehicle twice or press button e

on the remote control twice.

6 Further information – pages 29, 82,

radio remote control 3 – page 31,

central locking system 3 – page 33,

vehicle decommissioning – page 139.

When parking:

z Always apply hand brake firmly. On

slopes apply the hand brake as firmly as

possible.

z Engage first gear or reverse.

z Closing windows and sun roof 3.

z Turn steering wheel until lock is felt to

engage (anti-theft protection).

z Engine cooling fan may run on after the

engine has been switched off.

z Do not park vehicle on easily ignitable

surfaces as the hot exhaust system

temperatures could cause the surface to

ignite.

Picture no: 15218H.Tif

Service work,

Maintenance

We recommend that you entrust all work to

your Vauxhall Authorised Repairer, who

can provide you with reliable service and

correctly perform all work according to

factory instructions.

6 If you have a problem– page 128,

service interval display – page 130.

17In Brief

Genuine Vauxhall Parts and

Accessories

We recommend that you use "Genuine

Vauxhall Parts and Accessories" and

conversion parts released expressly for

your vehicle type. These parts have

undergone special tests to establish their

reliability, safety and specific suitability for

Vauxhall vehicles. Despite continuous

market monitoring, we cannot assess or

guarantee these attributes for other

products, even if they have been granted

approval by the relevant authorities or in

some other form.

"Genuine Vauxhall Parts and Accessories"

and conversion parts approved by

Vauxhall can be obtained from your

Vauxhall Authorised Repairer, who can

also provide expert Vauxhall advice on

permitted technical changes and ensure

correct installation.

That was a brief look

at the most important

information for your first drive in

your Agila.

The remain ing chapters

of the Owner’s Manual

contain important information on

operation,

safety

and maintenance

as well as a

complete index.

9 Warning

Carry out regularly the checks

recommended in the individual sections

of this Owner’s Manual.

Ensure that your vehicle is serviced at the

service intervals specified in the Service

Booklet. We recommend that you entrust

this work to your Vauxhall Authorised

Repairer.

Have faults remedied without delay!

Consult a workshop. We recommend your

Vauxhall Authorised Repairer. If

necessary, interrupt your journey.

6 Maintenance – page 130.

18 Instruments

Instruments

Control indicators ................................ 18

Instrument display............................... 22

Information display 3 ......................... 24

Radio reception 3................................ 26

Infotainment system 3........................ 26

Mobile telephones and radio

equipment 3...................................... 26

Picture no: 15216h.tif

Control indicators

The control indicators described here are

not present in all vehicles. The description

applies to all instrument versions.

Engine oil level 3

The engine oil level is checked

automatically.

Illuminated: Engine oil level too low. Check

oil level and top up as necessary. See

page 132.

Picture no:

EPS

Electric power steering 3

The control indicator illuminates for a few

seconds when the ignition is switched on.

Illumination while driving indicates a fault.

Driving may be continued. More force is

required for steering. Consult a workshop.

We recommend your Vauxhall Authorised

Repairer.

EPS = Electronic Power Steering.

19Instruments

Picture no: 15217h.tif

Engine electr onics, immobilizer

The control indicator illuminates for a few

seconds when the ignition is switched on.

Illuminates when the engine is running

Fault in the engine electronics system. The

electronics system switches to limp-home

mode. Fuel consumption may increase and

the driveability of the vehicle may be

impaired – see page 90. Consult a

workshop. We recommend your Vauxhall

Authorised Repairer.

If it flashes when the ignition is on:

Fault in the electronic immobilizer system;

the engine cannot be started – see

page 29.

Picture no:

Exhaust emission

Illuminates when the ignition is switched

on. Goes off shortly after the engine starts.

Illuminates when the engine is running

Fault in emission control system. The

permitted emission limits may be

exc eeded. Consult a workshop. We

recommend your Vauxhall Authorised

Repairer.

If it flashes when the engine is running:

Fault that can lead to destruction of the

catalytic converter is indicated – see

page 89. Consult a workshop immediately.

We recommend that you consult your

Vauxhall Authorise Repairer.

Turn signal lights

When the turn signal is activated, the

corresponding control indicator flashes.

Rapid flash: A turn signal bulb is faulty.

Bulb replacement – see page 122.

Both control indicators flash when the

hazard warning lights are activated.

Main beam

The control indicator is illuminated when

main beam is on and during headlight

flash – see page 10.

Anti-lock brake system (ABS)3

see page 94.

20 Instruments

Picture no: 15216h.tif

Brak e system

The control indicator illuminates when the

ignition is switched on if the hand brake is

applied or if the brake fluid level is too low.

Further information – see page 136.

Picture no:

9 Warning

Illuminated when the hand brake is not

applied: Stop the vehicle; interrupt your

journey immediately. Consult a

workshop. We recommend your Vauxhall

Authorised Repairer.

9 Warning

Illuminated together with the control

indicator for the Anti-lock Brake

System u: The braking force on the rear

wheels is not be ing re gulated. The vehicle

may swerve during braking. Consult a

wo r ks h op . W e r e c ommend y o ur Va ux ha l l

Authorised Repairer.

Alternator

Illuminates when the ignition is switched

on. Goes off shortly after the engine starts.

Illuminates when the engine is running

Stop the vehicle and switch off the engine.

The battery is not being charged. Engine

cooling may be interrupted. Contact a

workshop. We recommend your Vauxhall

Authorised Repairer.

21Instruments

Picture no: 15217h.tif

Engine oil pressure

Illuminates when the ignition is switched

on. Goes off shortly after the engine starts.

Picture no:

Illuminates when the engine is running

Engine lubrication may be interrupted. This

may result in damage to the engine and/or

locking of the drive wheels:

1. Move out of the flow of traffic as quickly

as possible without impeding other

vehicles.

2. Depress clutch.

3. Put the transmission in neutral

4. Switch off ignition.

Contact a workshop. We recommend that

you consult your Vauxhall Authorised

Repairer.

Fuel level3

Illuminated: Low fuel level. Fuel gauge in

reserve area.

If it flashes: Fuel reserve used up, fill up

immediately.

Never let the tank run dry!

Erratic fuel supply can cause catalytic

converter to overheat – see page 88.

Airbag systems 3,

belt tensioners

see pages 51, 57.

9 Warning

When the engine is off, considerably

more force is needed to brake and steer.

Do not remove key until vehicle has come

to a standstill, otherwise the steering

column lock could engage unexpectedly.

22 Instruments

Picture no: 12941h.tif

Instrument display

Tachometer 3

Indicates engine speed.

Warning zone: maximum permissible

engine sp eed ex ceeded ; danger to engine.

Speedometer

Indicates the vehicle speed.

Odom et er

Switchable between overall odometer and

two trip odometers A or B.

Overall odometer

With ignition on, display of total miles

driven – "ODO"

app ears on the display.

ODO = Odometer.

Picture no: 11141H.tif

Trip odometer

Switchable from overall odometer (ODO)

to trip odometer A (TRIP A) or trip

odometer B (TRIP B). Press the reset knob

briefly to switch between the three options.

Reset trip odometer A or B by pressing and

holding down the reset knob for

approx. 2 seconds.

Service interval display, see page 130.

23Instruments

Picture no: 13465h.tif

Coolant temperature display

For physical reasons, the engine

temperature gauge shows the coolant

temperature only if the coolant level is

adequate.

During operation the system is pressurised.

The temp erature ma y therefore rise briefly

to over 100 °C.

Picture no: 13466h.tif

Fuel gauge

Never let the tank run dry!

Because of the fuel remaining in the tank,

the amount of fuel required to fill the tank

may be less than the specified tank

capacity.

Pointer in low

zone = Engine operating

temperature not y et

reached

Pointer between

the zones = Normal operating

temperature

Pointer in upper

(warning) zone = Temperature too

high:

Stop vehicle and

switch off engine.

Danger to engine,

check coolant level

immediately – see

page 134.

Pointer in red

zone or Y

illuminated = Reserve area

Pointer in red

warning zone

or Y flashing = Fill up immediately –

see page87.

24 Instruments

Picture no: 17913s.tif

Information display 3

Triple information display

Display of time, outside temperature and

date/infotainment system if it is switched

on.

When the ignition is off, the time, date and

outside temperature can be made to

appear for approx. 15 seconds by briefly

pressing one of the two buttons on the

right-ha nd side of the display .

Setting date and time

Date and time can either be set manually

or corrected automatically with an RDS

time signal

Some RDS transmitters do not send correct

time signals. If the incorrect time is

displayed often, deactivate automatic

time synchronisation 3 and set the time

manually.

The automatic setting is indicated by Ö in

the display.

Picture no: 17914s.tif

Manual setting

Infotainment system off. Press Ö and ;

next to the display as follows:

RDS = Radio Data Sys tem.

Press Ö for approx. 2 seconds:

Day flashes

;:Set day

Ö:Month flashes

;:Set month

Ö:Year flashes

;:Set year

Ö:Hours flash

;: Set hours

Ö: Minutes flash

;: Set minutes

Ö: Clock is started.

12:01 17,0°C

FM 3 90,6MHz

REG AS RDS TP

8:56 5,5°C

07.04.2004

25Instruments

Deactivating and activating automatic

setting function 3

Infotainment system off. Press Ö and ;

next to the display as follows:

Picture no: 17913s.tif

Outside temperature

A fall in temperature is indicated

immediately and a rise in temperature

after a time delay.

If outside temperature drops below 3 °C,

the symbol : appears in the information

display as a warning for icy road

conditions. When tem perature increases to

at least 5 °C, the : symbol goes out.

Fault display

An F in the display indicates a fault. Have

the cause remedied. We recommend that

you consult your Vauxhall Authorised

Repairer.

hold down Ö for approx. 2 sec., clock

display is now in setting mode,

Press Ö twice (until year flashes).

Press Ö and hold down for approx.

3seconds until} flashes in display and

text "RDS TIME" appears (years flash

during this time),

Press ;; display of:

RDS TIME 0 = Off.

Press ;; display of:

RDS TIME 1 = On

Press Ö three times.

9 Warning

Caution: The road surface may already

be icy even though the display indicates

a few degrees above 0 °C.

8:56 -5,5°C

07.04.2004

26 Instruments

Radio reception 3

Car radio reception differs from domestic

radio reception:

As the vehicle antenna is relatively near the

ground, the broadcasting companies

cannot guarantee the same quality of

reception as obtained with a domestic

radio using an overhead antenna.

z Changes in distance from the

transmitter,

z multi-pa th recep tion du e to refle ction

and

z shadowing

may cause hissing, noise, distortion or loss

of reception altogether.

Infotainment system 3

The infotainment system is operated as

described in the operating instructions

supplied.

Mobile telephones and radio

equipment3

The Vauxhall installation instructions and

the operating guidelines provided by the

telephone manufacturer must be observed

when fitting and operating a mobile

telephone. Fa ilure to do so could inv alidate

the vehicle’s operating permit (EU Directive

95/54/EG).

Prerequisites for fault-free operation:

z Professionally installed exterior antenna

to obtain the maximum range possible

z Maximum transmission power 10 Watt,

z Installation of the telephone in a suitable

spot (see information on page 61).

27Instruments

Obtain advice on pred eterm ined

installation locations for the external

antenna and equipment holder and ways

of using devices with transmission power of

more than 10 Watts. We recommend that

you consult your Vauxhall Authorised

Repairer, who will have brackets and

various installation kits available as

accessories and will install them in

accordance with regulations.

For reasons of safety, we recommend that

you do not use the phone while driving.

Even use of a hands-free set can be a

distraction while driving. Be sure to observe

any country-specific regulations.

9 Warning

When used in the vehicle interior, mobile

telephones and radio equipment (CB)

with integrated antenna may cause

malfunctions in the vehicle electronics.

Mobile telephones and radio equipment

(CB) should only be used with an antenna

fitted on the vehicle exterior.

28 Keys, Doors, Bonnet

Keys, Doors,

Bonnet

Replacement keys

The key is a constituent of the electronic

immobiliser. Ordering keys from a Vauxhall

Authorised Repairer guarantees problem-

free operation of the electronic

immobiliser.

Keep the sp are key in a safe spot.

Locks – see page 143.

Lock cylinders

Designed to free-wheel if they are

forcefully rotated without the correct key or

if the correct key is not fully inserted.

To reset, turn cylinder with the correct key

until its slot is vertical, remove key and then

re-insert it. If the cylinder still free-wheels,

turn the key through 180° and repeat

op eration.

Car Pass

The Car Pass contains all of the vehicle’s

data and should therefore not be kept in

the vehicle.

Hav e y our Car Pass on hand when

consulting a Vauxhall Authorised Repairer.

Electronic immobilizer......................... 29

Mechanical unlocking or locking of

individual doors................................. 30

Radio remote control 3....................... 31

Central locking with vehicle key 3,

central locking with remote

control 3 ............................................ 33

Child safety locks ................................. 37

Bonnet .................................................. 37

29Keys, Doors, Bonnet

Picture no: 15761t.tif

Electronic immobilizer

The system checks whether the vehicle may

be started using the key that has been

inserted. If the k ey is "authorised" , the

vehicle can be started. This check is carried

out via a transponder housed in the key.

The electronic immobiliser is automatically

activated when the key is removed from

the ignition switch.

Picture no: 12943h.tif

Control indicator A for immobilizer

Control indica tor A illuminates briefly

when the ig nition is sw itched on.

If the control indicator flashes when the

ignition is on, there is a fault in the system;

the engine cannot be started. Switch off

the ignition and then repeat the start

attempt.

If control indicator A continues to flash,

try to start the engine using the spare key

and consult a workshop. We recommend

your Vauxhall Authorised Repairer.

If the control indicator A illuminates after

the engine has been started, there is a fa ult

in the engine electronics – see page 90.

Note

The immobilizer does not lock the doors.

After leaving the vehicle, therefore, always

lock it – see page 33.

30 Keys, Doors, Bonnet

Picture no: 18155h.tif

Mechanical unlocking or locking

of individual doors

(versions without radio remote control 3

and central locking system 3)

Front doors

To unlock:

Turn key in lock towards front of vehicle as

far as it will go. Return key to the vertical

position and remove. Pull door handle.

To lock:

With door closed, turn key towards rear of

vehicle as far as it will go. Turn key back to

vertical position and remove.

Operating from the inside

Pull or press the interior lock button.

Picture no: 13506h.tif

Tailgate

To unlock:

Turn the key to the left as far as the stop,

turn back to the vertical position and

withdraw.

The lock is released by pressing the button.

To lock:

Turn the key to the right as far as the stop,

turn back to the vertical position and

withdraw.

Picture no: 13746h.tif

Open luggage compartment

There are two handles on the inside of the

tailgate to aid in closing.

31Keys, Doors, Bonnet

Note

z Fitting of accessories on the tailgate will

incre ase its weig ht. If it be comes too

heavy, it will then not stay open.

z The number plate can only be clearly

seen if the tailgate is closed. It is

therefore not permitted to drive with the

ta ilg ate ope n.

Picture no: 13468h.tif

Radio remote control 3

The radio remote control is integrated in

the key.

Used to operate:

z central locking system,

z mechanical anti-theft locking system 3.

The radio remote control has a range of

approx. 3 metres. This range can be

affected by outside influences. Aim the

remote control at the vehicle to operate.

Picture no: 13469h.tif

Handle radio remote control with care,

protect from moisture and high

temperatures and avoid unnecessary

operation.

The hazard warning lights come on to

indicate that the remote control is

operational.

Central locking

with radio remote control 3,

see page 33.

Mechanical anti-theft locking system

with radio remote control 3

see page 33.

9 Warning

Do not drive with the luggage

compartment open, e.g. when

transporting bulky objects, since toxic

exhaust gas could penetrate the interior.

32 Keys, Doors, Bonnet

Fault

If the central locking system cannot be

operated with the radio remote control, it

may be due to the following:

z The range of the radio remote control

has been exceeded.

z The ignition key is in the ignition lock.

z The doors are not closed prop erly.

z Remote control battery voltage is too

low. Battery replacement - see next

column.

z Interference from higher-power radio

waves from other sources.

To eliminate the cause of the fault, contact

your Vauxhall Authorised Repairer.

Manual unlocking and locking with the

vehicle key - see page 30.

Picture no: 13470h.tif

Remote control battery replacement

Replace the battery as soon as the range

of the radio remote control begins to

shrink.

Remove screw on the underside of the

remote control key with a screwdriver and

remove cover.

The transponder for the immobiliser is

located in the key. Ensure that it is not

damaged or released.

Detach the remote control unit from the

key section by pressing in the buttons.

Ap ply screwdriver and open rem ote control

on both sides by ma king a slight turning

movement. See figure above.

Picture no:

Open up remote control. Replace battery

(battery type - see page 154). Note

installation position of battery (positive

terminal points down).

Close remote control and engage audibly.

Insert remote control unit in key section.

Close the cover and screw in place.

Make sure that you dispose of old batteries

in accordance with environmental

protection regulations.

33Keys, Doors, Bonnet

Picture no: 15144h.tif

Central locking with

vehicle key 3,

central locking with

remote control 3

For doors and luggage compartment.

To lock:

Turn key in front door lock toward rear of

vehicle, turn key back to vertical position

and remove.

– or –

Press button e on radio remote control 3

– or from the inside –

With doors closed, press button m on

driver’s door arm rest/pull. See next page,

figure 12273 H.

Picture no: 15146h.tif

Locking with mechanical

anti-theft locking system 3

All doors must be closed. After locking, turn

the key in one of the front door locks

towards the rear of the vehicle again, turn

it back to the horiz ontal p os ition an d

re move .

– or –

no more than 2 seconds after locking, press

button e on the remote control3 again.

Interior lock buttons on all doors are

blocked from opening.

Picture no: 15145h.tif

To unlock:

To unlock only the driver’s door:

Turn key in driver’s door lock towards front

of vehicle once, then move back to vertical

position and remove.

– or –

Press button c on radio remote control 3

once.

– or –

Press button m on driver’s door arm rest/

pull. See next page, figure 12273 H.

9 Warning

Do not use the system if there are people

in the vehicle! The d oors can only b e

unlocked from the inside if the ignition

is on.

34 Keys, Doors, Bonnet

To unlock entire vehicle:

Turn key in front door lock toward front of

vehicle twice, turn key back to vertical

position and remove.

– or –

Press button c on radio remote control 3

again within 5 seconds

– or –

Press button m on driver’s door arm rest/

pull. See figure 12273 H.

If the mechanical anti-theft locking

system 3 is engaged, the doors cannot be

unlocked using button m on the driver’s

door arm rest/pull.

Picture no: 12250h.tif

Central locking switch for

locking and unlocking the doors from

inside the vehicle

Press button m on driver’s door handle: all

doors are locked or unlocked.

If the mechanical anti-theft locking

system 3 is engaged, the doors cannot be

unlocked with this button.

Note

z To prevent the driver from being

inadvertently locked out, the button on

the driver’s door cannot be depressed

when the door is open.

z The lock button will not spring up if the

door handle is raised when the door is

being closed.

z 30 seconds after unlocking using the

radio remote control 3, the doors lock

again automatically if no door is

opened .

35Keys, Doors, Bonnet

z If the driver’s door is open or the ignition

is on, unlocking and locking with the

ra dio remo te control 3 is not possible.

z Unlocking is only possible with the key if

the anti-theft locking system is switched

on, so keep the spare key available in a

safe place!

Central locking 3 the luggage

compartment

The luggage compartment is locked and

unlocked via the central locking system.

The central locking system and anti-theft

locking system 3 for the doors cannot be

operated via the tailgate lock.

36 Keys, Doors, Bonnet

Picture no: 13471h.tif

Unlocking the tailgate when

the doors are locked with central locking

system

Turn the key anti-clockwise from the

vertical position as far as it will go. The key

springs back to the centre position. The

tailgate is then unlocked and can be

opened by pressing the button.

Picture no: 13472h.tif

After closing the tailgate, turn the key

clockwise as far as it will go. The key

springs back to the centre position and the

tailgate is locked. Remove the key.

The key can only be removed when in the

vertical position.

Picture no: 13746h.tif

Open the luggage compartment

There are two handles on the inside of the

tailgate to aid in closing.

37Keys, Doors, Bonnet

Note

z Fitting of accessories on the tailgate will

incre ase its weig ht. If it be comes too

heavy, it will then not stay open.

z The number plate can only be clearly

seen if the tailgate is closed. It is

therefore not permitted to drive with the

ta ilg ate ope n.

Picture no: 11155H.tif

Child safety locks

Push the latch on rear door locks down:

door cannot be opened from the inside.

Picture no: 11165H.tif

Bonnet

To open the bonnet, pull the release lever,

located on the driver’s side below the

instrument panel. The bonnet will then be

unlocked and will partially open. Return

release lever to its original position.

9 Warning

Do not drive with the luggage

compartment open, e.g. when

transporting bulky objects, since toxic

exhaust gas could penetrate the interior.

9 Warning

Use the child safety lock whenever

children are occupying the rear seats.

Disregard may lead to injuries or

endang er life. Vehicle p assengers should

be informed accordingly.

38 Keys, Doors, Bonnet

Picture no: 16179h.tif

The safety catch is located above the

radiator grille at the centre of the bonnet.

Open the bonnet by moving the catch to

the left and lifting the bonnet.

Any dirt or snow on the bonnet can slide

down towards the windscreen when the

bonnet is opened and block the air intake –

see page 80.

Picture no: 11167H.tif

To hold the bonnet open, insert the support

rod located on the right-hand side of the

vehicle (as viewed in the direction of travel)

in the slot on the underside of bonnet.

Before closing bonnet, press support rod

firmly into its retainer. Lower the bonnet

gradually and then allow it to fall into the

lock under its own weight.

Check that the bonnet is locked in position

by pulling at its front edge. If it is not

engaged, repeat the procedure.

39Seats, Interior

Seats, Interior

Picture no: 13473h.tif

Seat position

Adjust driver’s seat such that with the

driver sitting upright the steering wheel is

held in the area of its upper spokes with the

driver’s arms slightly bent.

Push passenger seat as far back as

possible.

The seat backrests must not be tilted too

far back (recommended tilting angle

approx. 25 °).

Picture no: 13474h.tif

Head restraints

The centre of the head restraint should be

at eye level. If this is not possible, adjust to

highest position for extremely tall people or

to lowest position for extremely short

people.

Luggage compartment enlargement 41

Lashing eyes 3 .................................... 42

Notes on loading ................................. 42

Luggage compartment cover 3......... 43

Safety net 3 ......................................... 43

Storage options in the vehicle interior 45

Notes on loading the vehic le .............. 48

Sun visors.............................................. 48

Cigarette lighter 3............................... 49

Accessory socket ................................. 49

Ashtray 3 ............................................. 49

9 Warning

Do not sit nearer than 10 inches (25 cm)

from the steering wheel, to permit safe

airbag deployment.

Failure to observe the descriptions could

lead to injuries which could be fatal.

Vehicle passengers must be informed

accordingly before starting-off.

9 Warning

Failure to observe the descriptions could

lead to injuries which could be fatal.

Vehic le pa ssengers should be informed

accordingly before starting off.

40 Seats, Interior

Picture no: 15137h.tif

Front head restraint adjustment

Adjust the head restraints by tipping them

forward, holding and adjusting the height.

To improve visibility when the front

passenger seat is unoccupied or to fold

down the front passenger seat, push the

head restraint all the way down or remove.

If the front passenger seat is occupied,

adjust the head restraint to the

appropriate level for the occupant’s body.

Picture no: 13741h.tif

Rear head restraint adjustment

To improve visibility when the rear seats

are unoccupied or to fold down the rear

seat backrests, press the detent springs on

the guide sleeves to release the head

restraints and push them all the way down

or remove them . See next column.

If the rear seats are occupied, adjust the

rear head restraints to the occupants’ body

size.

Picture no: 15148h.tif

Head restraint removal

Press the two detent springs on the guide

sleeves to release, remove head restraint.

41Seats, Interior

Luggage compartment

enlargement

Remove the luggage compartment

cover 3. See page 43.

Remove the push-in sleeves 3 for mounting

the ISOFIX child restraint system 3; see the

separate instructions for the ISOFIX child

restraint system.

Remove the safety net 3 from the rec es s

under the rear seat cushions as necessary.

Picture no: 13742H.tif

Folding rear seat backrests

Press the detent springs on the guide

sleeves to release the rear head restraints

and push the m a ll the way down or remove

them (see previous page).

Disenga ge the centre three-point seat belt

from both buckles. The belt will retract fully

– see page 55.

Disengage one or both rear seat backrests

with the pushbutton and fold down onto

the seat cushion.

Picture no: 13743H.tif

Repositioning rear seat backrests

Pull the outer seat belt forward so it is not

damaged when the backrest is returned to

an upright position.

Engage rear seat backrest audibly in

position.

Engage the tongue of the centre three-

point seat belt in the two buckles of the

centre rear seat.

Install the luggage compartment cover 3 -

see page 43.

Install the push-in sleeves 3 for mounting

the ISOFIX child restraint system 3.

42 Seats, Interior

Picture no: 16180h.tif

Folding down the front passenger seat 3

Push front passenger sea t head restraint

all the way down or remove (see page 40).

Slide front passenger seat back.

Tilt passenger seat backrest forward by

lifting the release lever.

Repositioning the front passenger seat

backrest 3

Press the release lever forward, restore the

front passeng er seat back rest to an upright

position and audibly engage.

Picture no: 13750h.tif

Lash ing eyes 3

Lashing eyes in the luggage compartment

are for securing transported items with

lashing straps 3 or a luggage net 3 to

prevent them from slipping around.

There are a total of six lashing eyes in the

luggage compartment.

Notes on lo ading

see page 48.

43Seats, Interior

Picture no: 13744h.tif

Luggage compartment cover 3

To remove, unhook the retaining straps

from the tailgate.

Remove the cover from the side guides and

place it behind the seat backrests.

Fit in reverse order.

Do not place any heavy or sharp-edged

objects on the cover.

Picture no: 11453h.tif

Safety net 3

When the rear seat backrests are folded

down, the safety net is mounted behind the

front seats.

Passengers must not be carried behind the

safety net.

Picture no: 11454h.tif

Fitting

Folding rear seat backrests - see luggage

compartment enlargement on page 41.

There are two installation apertures in the

roof frame above the front seats: Use the

ignition key to unclip the cover. Engage

one side of the upper net rod in one side

and then engage in the other side. Close

the cover.

44 Seats, Interior

Picture no: 13748h.tif

Hook the safety net tensioning straps in the

lashing eyes in the floor behind the front

seat and tension.

Removing

Swivel tensioning strap length adjusters

upward and unhook straps from the eyes in

the floor. Open the cover of the installation

apertures 3 in the roof frame. Unhook

upper net rod and close cover.

Picture no: 13505h.tif

Stowage of safety net

Roll up the removed safety net and secure

it with Velcro strip.

Guide the safety net into the recess under

the rear seats.

45Seats, Interior

Picture no: 13749h.tif

Storage options in the vehicle

interior

Storage nets 3 on both sides of luggage

compartment

On some versions, there are storage nets

on the right and left walls of the luggage

compartment.

Do not stow any heavy objects in the nets.

Picture no: 13751h.tif

Storage box in luggage compartment 3

The storage box is located behind the left

rear seat backrest in the luggage

compartment.

Fitting

Folding down rear seat backrests – see

page 41.

With the tailgate open, tip the storage box

forward and engage the recesses on the

storage box on the locating pins.

Picture no: 13752h.tif

Secure the storage box at the back with

knurled screws.

Engage the rear seat backrests in seating

position.

Removing

To remove, reverse sequence of

operations.

46 Seats, Interior

Picture no: 13480h.tif

Storage tray 3 under front passenger

seat

Lift tray by grasping recessed edge and

pull forwards. Maximum load: 1 kg. To

close the tray push it in and lock it in place.

Picture no: 15149h.tif

Rucksack 3 on the back of a front seat

backrest

Fasten securing belt for rucksack onto front

seat backrest: feed both belt straps

between seat and backrest. Feed belt

straps through lashing eyes and tighten.

Picture no: 11473h.tif

Attach rucksack to both clips at top and

secure to snap fastener at bottom.

47Seats, Interior

Glove compartment

Pull the handle to open.

Addition storage options

are found

z in the pockets 3 on the back of the front

seat backrests,

z in the compartments 3 at the side of the

front seats,

z in the compartments 3 in the door inner

panelling,

z in the stowage compartment 3 beneath

the glove c om partment,

z in the luggage net 3 on the back of the

rear backrest,

z in the stowage compartment 3 in the

centre console in front of the gear lever.

Drink holder 3

There are two drink holders located in the

centre console in front of the gear lever.

48 Seats, Interior

Notes on loading the vehicle

z Heavy objects in the luggage

compartment should be placed as far

forward as possible aga inst the engag ed

rear seat backrests or, if the rear seat

backrests are folded down, against the

front seat backrests. If objects are to be

stacked, the heavier objects should be

placed at the bottom. Unsecured objects

in the luggage compartment would be

thrown forward with great force in the

event of heavy braking, for example.

z Secure heavy objects with lashing

straps 3 attached to lashing eyes3 –

see page 42. If heavy loads slip when the

vehicle is braked heavily or driven

around a bend, the handling of the

vehicle may change.

z Loose objects in the luggage

compartment should be secured against

slipping using a luggage net 3 – see

page 42.

z Fit the safety net when transporting

objects in the luggage compartment

with the rear seat backrests folded down

– see page 43.

z If the backrests are not folded down

when transporting objects in the

luggage compartment, they must be

engaged in the upright position. See

page 41.

Picture no: 13753h.tif

z Do not allow the load to protrude above

the upper edge of the rear seat

backrests, or above the upper edge of

the front seat backrests if the rear seat

backrests are folded down.

z The warning triangle 3 and first-aid kit

(cushion) 3 must always be freely

accessible.

z Do not place any objects in front of the

rear window or on the instrument panel.

They are reflected in the glass, obstruct

the driver’s view and will be thrown

through the vehicle, for insta nce in the

event of heavy braking.

z Objects must not be stored in the airbag

inflation area, because they could cause

injury if the airbag inflates.

z The load must not obstruct the operation

of the hand brake and the gears or

restrict the driver’s freedom of

movement.

z Do not drive with the luggage

compartment open, e.g. when

transporting bulky objects, since toxic

exhaust g as could p enetrate the interior.

z Weights, payload and roof load – see

page 150.

z Roof load s increase the vehicle’s

sensitivity to crosswinds and has a

negative affect on driveability due to an

raised centre of gravity.

Sun visors

Use the sun visor to protect from glare by

pulling it down and swivelling it to the

side 3.

9 Warning

Disregard of these notes can lead to

injuries which may be fatal. Vehicle

passeng ers should be inform ed

accordingly.

49Seats, Interior

Picture no: 16181h.tif

Cigarette lighter 3

In front centre console:

Press cigarette lighter with ignition

switched on. Switches off automatically

when elem ent is glowing. Withdraw

cigarette lighter.

Accessory socket

The cigarette lighter socket ca n be used to

connect electrical accessories.

Picture no: 16182h.tif

The socket is operational when the ignition

is switched on. Use of the socket discharges

the battery if the engine is not running.

Do not damage the sockets by using

unsuitable plugs.

The maximum power consumption of

electrical accessories must not exceed

120 watts.

Do not connect any current-delivering

accessories, e.g. electrical charging

devices or batteries.

Electrical accessories connected to the

socket must comply with the

electromagnetic compatibility

requirements laid down in DIN standard

VDE 40 839. otherwise vehicle malfunctions

may occur.

Picture no: 16183h.tif

Ashtray3

To be used only for ash and not for

combustible rubbish.

To open:

Withdraw ashtray.

To empty:

Press ashtray cover down and withdraw

ashtray.

9 Warning

Disregard of these notes can lead to

injuries which may be fatal. Vehicle

passeng ers should be inform ed

accordingly.

50 Safety systems

Safety systems

Three-stage restraint system

Comprising:

z three-point seat belts

z belt tensioners at the front seats

z airbag systems for driver a nd front

passenger seats 3.

The three stag es are a ctivated in sequence

depending on the seriousness of the

accident:

z The automatic seat belt locking devices

prevent the belt strap from being pulled

out and thus ensure that the vehicle

occupants are retained in their seats.

z The seat belts on the front seats are

tensioned on the automatic retractors.

As a result, the seat be lts a re

instantaneously tightened and the

occupants are made aware of the

deceleration of the vehicle at a very early

stage. This reduces the stress placed on

the body.

z The airbag systems are also triggered in

th e ev en t of s erious accide n ts an d for m a

safety cushion for the occupants.

Read the instructions supplied with the

child restraint system!

Seat belts.............................................. 51

Three-point seat belts ......................... 51

Belt tensioners...................................... 52

Using the belts ..................................... 54

Vauxhall Full Size airbag system ....... 56

Use of child restraint systems 3 ......... 62

Mounting brackets 3 for ISOFIX child

restraint systems ............................... 62

Exterior mirrors..................................... 65

Head restraints .................................... 65

Sun visors, glove compartment .......... 65

Safety accessories 3 ........................... 65

9 Warning

The airbag systems 3 serve to

supplement the three-point seat belts

and belt tensioners. The seat belts must

therefore always be worn. Disregard of

these instructions may lead to injuries or

endanger life. Vehicle passengers should

be informed accordingly.

51Safety systems

Seat belts

In the event of an accident, persons not

wearing seat belts endanger their fellow

occupants and themselves.

Seat belts are designed to be used by only

one person at a time. They are not suitable

for children under 12 years of age or

150 cm unless an appropriate child

restraint system is used.

For children up to 12 years of age we

recommend the Vauxhall child restraint

system – see page 63.

Picture no: 13461h.tif

Three-point seat belts

The vehicle is equipped with three-point

seat belts with automatic retractors and

locking devices, allowing freedom of body

movement although the spring tensioned

belts always ensure a snug fit.

For information on proper seat position,

see page 39.

The belt has a "vehicle sensitive retractor"

which is designed to lock during heavy

acceleration or deceleration in any

direction.

Testing the belts

Plea se check all parts of the b elt system

occasionally for damage and correct

operation. Have damaged parts replaced.

In case of an accident, please replace

overstretched belts and triggered belt

tensioners. We recommend consulting your

Vauxhall Authorised Repairer.

Do not make any alterations to the belts,

their anchorages, the automatic retractors

or the belt buckles.

Make sure that belts are not damaged or

trapped by sharp-edged objects.

9 Warning

Always wear your seat belt, and that

means also in urban traffic and when you

are a rear seat passenger. It can save

your life!

Pregnant women must always wear a

seat belt – see page 54.

52 Safety systems

Belt tensioners

The front seat belt systems incorporate belt

tensioners. In the event of a head-on

collision and depending on the severity of

the accident, the seat belts are

instantaneously tightened by the

automatic retractors.

Actuation of belt tensioners

is indicated by illumination of control

indicator v.

The belt tensioners must be replaced after

activation. We recommend that you

consult your Vauxhall Authorised Repairer.

If the seat belts are undamaged the

operation thereof is unaffected, even if the

belt tensioners have been triggered.

Important information – see page 51.

Picture no: 12944h.tif

Control indicator v for belt tensioners

Belt tensioners are m onitored electronica lly

together with the airbag systems and their

operational status is shown by control

indicator v in the instrument panel. When

the ignition is switched on, the control

indicator flashes for approx. 4 seconds. If it

does not flash, does not go out after 4

seconds, or illuminates while driving, there

is a fault in the belt tensioning system or in

the airbag systems, see page 57. The belt

tensioners or airbag systems may fail to

deploy in the event of an accident.

Deployment of the belt tensioners is

indicated by continuous illumination of v.

The system’s integrated self-diagnostics

allows faults to be quickly remedied. Have

your Car Pass on hand when consulting a

Vauxhall Authorised Repairer.

9 Warning

Have the cause of the fault remedied. We

recommend that you consult your

Vauxhall Authorised Repairer.

53Safety systems

Important

z Do not fit accessories not specifically

released for your vehicle type or store

objects in the belt tensioner operating

area due to the risk of injury in the event

the belt tensioners are triggered.

z Do not make any modifications to the

components of the belt tensioners, as

this will render the vehicle unroadworthy.

z The belt tensioner and airbag system

control electronics can be found in the

centre console area. In order to avoid

malfunctions, do not store magnetic

objects in this area.

z We recommend that you have the front

seats removed by a Vauxhall Authorised

Repairer.

z The belt tensioners only actuate once.

Please replace belt tensioners that have

been triggered. We recommend that you

consult your Vauxhall Authorised

Repairer.

z Applicable safety directives must always

be observed when disposing of the

vehicle. For this reason, disposal should

be performed by an authorised recycling

company. We recommend that you

consult your Vauxhall Authorised

Repairer.

9 Warning

Improper handling (e.g. removal or

installation) can activate the belt

tensioners – risk of injury.

54 Safety systems

Picture no: 12935h.tif

Using the belts

Fitting seat belts

Pull the belt out of the retractor and guide

it across the body, making certain that it is

not twisted.

Insert the latch plate into the buckle. The

backrest must not be tilted too far back,

since this would affect the operation of the

seat belts; recommended tilting angle

approx. 25 °. The lap belt must be straight

and lie snugly against the body. Tighten

the lap belt at frequent intervals whilst

driving by tugging the diagonal part of

belt.

Picture no: 11178H.tif

Bulky clothing prevents the belt from fitting

properly. The belt must not rest against

hard or fragile objects in the pockets of

your clothing (e.g. ballpoint pens, keys,

spectacles) because these could cause

injury. Do not place any objects (e.g.

handbags, mobile phones) between the

belt and your body.

Picture no: 12936h.tif

Height adjustment

To adjust the height of front seat belt

upper anchorage points:

1. Pull belt out slightly.

2. Pull knob.

3. Set desired height.

4. Allow to lock audibly into position.

Do not adjust height while driving.

9 Warning

O n pre gna nt wome n in particular, the lap

belt must be positioned as low as

possible across the pelvis so as not to put

too much pressure on the abdomen.

55Safety systems

Picture no: 13461h.tif

Adjust height such that the belt p asses

over the wearer’s shoulder and rests

against the shoulder. It must not pass over

the neck or upper arm.

Picture no: 11180H.tif

Removing the belt

To remove the belt, depress the red

pushbutton on the buckle; the belt will

retract automatically.

Picture no: 15265h.tif

Three-point seat belt

for centre rear seat

Pull belt from roof mounting by the latch

plates. Click lower latch plate into the

matching (smaller) right belt buckle. Use

the upper latch plate to guide the belt over

your shoulder and stomach area without

twisting it, click latch plate into the left

outer belt buckle.

The latch plate of the central belt only

engages in the matching (left outer) belt

buckle. The latch plate can be inserted in

all the other belt buckles but will not

engage.

56 Safety systems

To remove the b elt, press the button on the

left-hand buckle. The belt will retract

automatically and will position itself ready

to hand on the backrest.

When enlarging the luggage

compartment, disengage the belt from

both buckles; the belt will retract fully.

Picture no: 11181H.tif

Vauxhall Full Size airbag system

The Vauxhall Full Size airbag system

comprises severa l ind ividual systems.

Front a irbag system

The front airbag system is triggered in the

event of a serious accident involving a

frontal impact and forms safety cushions

for the driver and front passenger 3. The

forward movement of the driver and front

passenger is checked and the risk of

injuries to the upper body and head

thereby substantially reduced.

Picture no: 12947h.tif

Side airbag system 3

The side airbag system is triggered in the

event of side-on collisions and forms safety

cushions for the driver and front passenger

in the respective front door area. The risk of

injury to the upper body in the event of a

side impact is thereby substantially

reduced.

57Safety systems

Picture no: 15151H.tif

Vauxhall Full Size airbag system

Front airbag

The front airbag system is identified by the

word AIRBAG on the steering wheel and

above the glove compartment 3.

The front airbag system comprises:

z an airbag with inflator in the steering

wheel and a second one behind the trim

panel above the glove compartment 3

z the control electronics with impact

sensor

z the airbag systems control indicator v in

the instrument panel.

Picture no: 16184h.tif

The front airbag system will be triggered:

z depending on the severity of the

accident

z depending on the type of impact

z within the range shown in the illustration

z independently of the side airbag

system 3.

Examples of events triggering the front

airbag system:

z Impact against a non-yielding obstacle:

the front airbags are triggered at low

vehicle speed.

z Impact against a yielding obstacle (such

as another vehicle): the front airbags are

only triggered at a higher vehicle speed.

58 Safety systems

Picture no: 11181H.tif

When triggered, the front airbags inflate in

milliseconds and form a safety cushion for

driver and front passenger 3. The forward

movement of the driver and front

passenger is checked and the risk of

injuries to the upper body and head

thereby substantially reduced.

No impairment of view will occur, because

the airbags inflate and deflate so quickly.

Picture no: 13473h.tif

The front airbag system will not be

triggered in the event of

z the ignition being switched off,

z minor frontal collisions,

z accidents in which the vehicle overturns,

z collisions involving a side or rear impact

that is to say, if it would not be of benefit to

the occupants.

9 Warning

The front airbag system provides

optimum protection when the seat,

backrest and head restraint are correctly

adjusted: adjust the driver’s seat

according to the occupant’s height such

that with the driver sitting upright the

steering wheel is held in the area of its

upper spok es with the d riv er’s arms

slightly bent. The passenger seat should

be as far back as possible, with the

backrest upright – see page 39. Do not

place the head, body, hands or feet on

the covers of the airbag systems.

Do not place any objects in the area in

which the airbags inflate. Important

information – see page 61.

9 Warning

The three-point seat belt must be

correctly fitted – see page 55.

59Safety systems

Picture no: 13461h.tif Picture no: 12945h.tif

Side airbag 3

The side airbag system is identified by the

word AIRBAG on the outboard sides of the

front seat backrests.

The side airbag system comprises:

z an airbag with inflator in the back of the

driver’s and front passenger’s seat

respectively,

z the control electronics,

z the side impact sensors,

z the airbag systems control indicator v in

the instrument panel,

Picture no: 12946h.tif

The side airbag system will be triggered:

z depending on the severity of the

accident,

z depending on the type of impact,

z within the range shown in the illustration

on the centre door pillar of the driver’s or

front passenger’s side,

z independently of the front airbag

system.

9 Warning

Seat belts must therefore always be worn.

The front airbag system serves to

supplement the three-point seat belts. If

you do not wear your seat belt you risk

being seriously injured, or even thrown

from the vehic le, in the ev ent of an

accident.

In the event of an accident the belt helps

to keep you in the correct seating

position, so that the front airbag system

can provide you with effective protection.

60 Safety systems

Picture no: 12947h.tif

When triggered, the side airbag inflates in

milliseconds to form a safety cushion for

the d river or front passenger in the

respective door area. This substantially

reduces the risk of injury to the upper body

in the event of a side-on collision.

The side airbags will not be triggered in the

event of

z the ignition being switched off,

z frontal collisions,

z accidents in which the vehicle overturns,

z collisions involving a rear impact,

z collisions involving a side impact outside

the passenger cell.

Control indicator v for airbag systems

The airbag systems are monitored

electronically together with the belt

tensioners and their operational status is

indicated by control indicator v in the

instrument panel. When the ignition is

switched on, the control indicator flashes

for approx. 4 seconds.

Picture no: 12944h.tif

If it does not flash, does not go out

after 4 seconds or illuminates while driving,

there is a fault in the airbag systems or the

belt tensioner system see page 51. There is

a possibility that the systems will not be

triggered in the event of an accident.

Deployed airbag systems are indicated

through constant illumination of v,

The system’s integrated self-diagnostics

allows faults to be quickly remedied. Have

your Car Pass on hand when consulting a

Vauxhall Authorised Repairer.

9 Warning

There must be no objects in the area in

which the airbag inflates or in the area

between the seat backs and the vehicle

body. Do not place the hands or arms on

the covers of the airbag systems.

Important information – see page 61.

The three-point seat belt must always be

correctly fitted – see page 54.

9 Warning

Have the cause of the fault remedied. We

recommend that you consult your

Vauxhall Authorised Repairer.

61Safety systems

Important

z Accessories and other objects must not

be affixed or placed in the area in which

the airbags inflate as they could cause

injury if the airbags are deployed.

z Do not place any objects between the

airbag systems and the vehicle

occ upa nts; d ang er of injury .

z The electronics controlling the airbag

systems and belt tensioners are located

in the centre console. To prevent

malfunction, do not place any magnetic

objects in the vicinity of this console.

z Use the hooks 3 in the roof frame only to

hang up light articles of clothing or coat

hangers. Do not place any objects in the

pockets of the hanging items – risk of

in j u ry.

z Do not stick anything on the steering

wheel, instrument panel or front seat

backrests in the vicinity of the airbags or

cover them with other materials.

z Use only a dry cloth or interior cleaner to

clean the steering wheel, instrument

panel and front seat backrests. Do not

use abrasive cleaning agents.

z Only protective covers which are

approved for your Agila with side

airbags 3 may be fitted on the front

seats. When fitting the protective covers,

make sure that the airbag units on the

outboard sides of the front seat

backrests are not covered.

z The airbag systems are triggered

independently of each other based on

the severity of the accident and the type

of impact.

z Each airbag can be triggered only once.

Once triggered, an airbag must be

replaced without delay. We recommend

that you consult your Vauxhall

Authorised Repairer.

z Th e s pee ds, d ire ctions of m ov eme n t an d

deformation p roperties of the v ehicles,

and the properties of the obstacle

concerned, determine the severity of the

accident and triggering of the airbags.

The degree of damage to your vehicle

and the resulting repair costs alone are

not indicative that the criteria for

triggering of the airbags were met.

z Do not perform any alterations on the

components of the airbag system, as this

would render the vehicle unroadworthy.

z We recom mend entrusting removal of

the steering wheel, the instrument panel,

the front seats a nd the seat b elts to your

Vauxhall Authorised Repairer.

z Applicable safety directives must always

be ob served when disposing of the

vehicle. For this reason, disposal should

be performed by an authorised recycling

company. We recommend that you

consult your Vauxhall Authorised

Repairer.

z Anyone weighing less than 35 kg should

sit in the rear seats.

9 Warning

As with any other object, child restaint

system s must not be carried on a

passenger’s lap. Danger to life.

9 Warning

The systems can be triggered abruptly

and cause injury if they are hand led

improperly.

62 Safety systems

Picture no: 11704a.tif

Use of child restraint systems 3

Picture no: 12945h.tif

Vehicles with a front passenger airbag 3

can be identified by the word AIRBAG

above the glove compartment and – with

the passenger door op en – the warning

sticker on the side of the dashboard. See

Fig. 11704 A.

Vehicles with side airbags 3 can be

identified b y the word AIRBAG on the

outboard side of the front seat backrest.

See Fig. 12965 H.

Mounting brackets 3 for ISOFIX

child restraint systems

Mountings 3 for the attachment of ISOFIX

child restraint systems are located between

the backrest and seat cushions of the

outboard rear seats.

The instructions accompanying the ISOFIX

child restraint system are to be expressly

followed.

Only ISO FIX child restraint systems

approved for the vehicle may be used. We

recommend that you consult your Vauxhall

Authorised Repairer.

9 Warning

Child restraint systems must not b e

installed on the front passenger seat of

any v ehicle with airbag systems 3 - risk to

life. If the vehicle is equipped with airbag

system s, child restraint systems must be

mounted on the outboard seats in the

rear seat row 3.

Child restraint systems may only be

installed on the front passenger seat if

the vehicle is not equipped with airbag

system s.

63Safety systems

Child restraint system 3

The Vauxhall child restraint system is

designed specifica lly for y our Va ux ha ll and

thus provides optimum safety for your child

in the event of impact. If a different child

safety seat is used, follow the

manufacturers’ instructions for fitting and

use.

The country in which you are driving could

require the use of child restraint systems

and specific seats. Follow all local and

national regulations.

Selecting the right system

Your child should be transported facing

rearward in the car as long as possible.

Change the system when the height of the

child is such that the head extends over the

top of the system and is no longer

supported at eye level. The child’s cervical

vertebrae are still very weak. In the event of

an accident, they are subjected to less

stress in the semi-prone rearward position

than when upright.

Note

z Children under 12 years or under 150 cm

tall should only travel in an appropriate

child safety seat.

z When transporting children, use the child

restraint systems suitable for the child’s

weight.

z Ensure correct installation of child

restraint system, see the instructions

enclosed with the system.

z The covers of the Vauxhall child restraint

system can be wipe d clean.

z Do not stick anything on the child

restraint systems and do not cover them

with any other materials.

z Only allow children to enter and exit at

the side facing away from the traffic.

z A child restraint system which has been

subjected to stress in an accident must

be replaced.

9 Warning

Child restaint systems must not be carried

on a passenger’s lap. Danger to life.

64 Safety systems

Permissible options for fitting a child safety seat

Weight

and

age class

We recommend the use of each system until the child reaches the upper weight limit.

front

passenger seat

of vehicle

with

airbag systems

front

passenger seat

of vehicle

without

airbag systems

outer seats

in rear row

centre seat

in rear row

up to 10 kg

or approx.

10 months

0+:

up to 13 kg

or approx.

2 years

XU U+ X

9 to 18kg

or approx.

8 months to

4years

XU U+ X

II:

15 to 25 kg

or approx.

3 to 7 years

III:

22 to 36 kg

or approx.

6 to 12 years

XU U X

X = No child restraint system permitted.

U = Universal suitability in conjunction

with three-point seat belt.

+ = Seat with ISOFIX mounting

availab le. When mounting with

ISOFIX, only ISOFIX child restraint

systems that have been approved

for the vehicle m ay b e used. We

recommend your Vauxhall

Authorised Repairer.

65Safety systems

Picture no: 13481h.tif

Exterior mirrors

For the safety of pedestrians, the exterior

mirrors will swing out of their normal

mounting position if they are bumped with

sufficient force. Reposition the mirror by

applying slight pressure to the mirror

housing.

Head restraints

Adjust the head restraints to suit body

size 3. See page 39.

Do not mount any objects or components

not specifically released for your Agila on

the head restraint. They would hinder the

protective function of the head restraint

and could be thrown uncontrollably

through the vehicle in the event of heavy

braking or an accident.

Sun visors, glove compartment

The mirror cover in the sun visor and the

glove compartment should be closed whilst

driving.

Safety accessories 3

The wide range of Vauxhall accessories

allows you to equip your Agila in

accordance with your own wishes. In

addition to safety accessories, items for

improving comfort and a complete range

of vehicle care products you will find many

articles which will be of great value to you

when needed.

"Genuine Vauxhall Parts and Accessories"

guarantee high quality and accurate fit.

Your Vauxhall Authorised Repairer will be

happy to advise you, for example with

regard to:

z Vauxhall child restraint systems,

z Tow ropes,

z Tow rods,

z Jump leads,

z Spare bulb kit,

z Spare fuse kit,

z Halogen fog lights,

z Mud flaps,

z Magnetic light,

z Warning triangle,

z First-aid kit,

z First-aid kit (cushion).

66 Lighting

Lighting

Picture no: 18156h.tif

Exterior lights

Turn light switch:

7 =Off

8 = Parking lights

9 = Dipped beam, main beam

Dipped beam, main beam and headlight

flash – see page 10.

In positions 8 and 9, the tail lights and

number plate light are also illuminated.

If the ignition is switched off while dipped

beam or main beam is on, the parking

lights come on 3.

Vehicles with daytime running lights 3:

With the ignition on and the light

switch on 7, dipped beam without

instrument illumination is on.

The daytime running lights switch off when

the ignition is switched off.

Follow the regulations of the country in

which you are driving when using daytime

running lights and fog lights 3.

Driving abroad – see page68.

Headlight range adjustment ?.......... 67

Fog lights >3..................................... 67

Fog tail light......................................... 67

Turn signals, hazard warning lights... 67

Reversing lights.................................... 67

Courtesy lig ht 0.................................. 68

Instrument illumination ....................... 68

Information display illumination 3..... 68

Ashtray illumination 3 ........................ 68

Headlights when driving abroad ....... 68

67Lighting

Picture no: 18157h.tif

Headlight range adjustment ?

Adjust headlight range to four stages of

vehic le load ing with dipped beam switched

on: turn knurled wheel to desired position.

Correct adjustment of the headlight range

reduces dazzle for other road users.

z Front seats occupied = 0

z All seats occ upied = 1

z All seats occupied and

luggage compartment load = 2

z Driver’s seat occupied and

luggage compartment load = 3

Picture no: 11457h.tif

Fog lights >3

On = Press >, > illuminates

in instrument panel

Off = Press > again or

switch ignition or light off

The fog lights can only be switched on

when both the ignition and lights are on.

Fog tail light

On = Press r, r illuminates

in instrument panel

Off = Press r again or

switch ignition or light off

The fog tail light can only be switched on,

when the ignition and dipped beam/

parking lights are on.

The fog tail lights on the vehicle are

deactivated when towing a caravan/

trailer.

Turn signals, hazard warning

lights

see page 11.

Reversing lights

Come on when reverse gear is engaged

and ignition is switched on.

68 Lighting

Picture no: 11186H.tif

Courtesy light 0

Comes on when a door is opened.

Picture no: 11458h.tif

To keep the courtesy light on, pull the light

switch.

Instrument illumination

Comes on together with exterior lighting

(not when daytime running lights

are on 3).

Information display

illumination 3

Comes on when the ignition or

infotainment system is on.

Ashtray illumination 3

Comes on together with exterior lighting.

Headlights when driving abroad

The asymmetrical dipped beam increases

the field of vision on the passenger side of

the lane.

This causes glare for oncoming traffic if the

vehicle is driven in countries where traffic

drives on the opposite side of the road.

To avoid glare, place masking strips on

both headlights. We recommend that you

consult your Vauxhall Authorised Repairer.

69Windows, Sun roof

Windows,

Sun roof

Picture no: 11188H.tif

Door windows

Turn the hand crank clockwise or

anticlockwise

Electric windows in front doors 3....... 70

Sun roof 3 ............................................ 71

9 Warning

Take care when operating the electric

windows 3. Risk of injury, particularly to

children.

Vehicle passengers should be informed

accordingly.

Keep a close watch on the windows when

closing them. Ensure that nothing

becomes trapped in them as they move.

Before leaving the vehicle, remove the

ignition key in order to prevent

unauthorized operation of the windows

and sun roof.

70 Windows, Sun roof

Picture no: 11189H.tif

Electric windows in

front doors 3

Operated via tw o roc ker switches in the

driver’s door handle - one for the driver’s

door window and one for the passenger

door window. Additional rocker switch in

the p assenger door handle.

To op en:

To open completely, hold the button

depressed until the window fully reaches its

end position.

To open in stages, press the button briefly.

To close:

To close completely, hold the button

depressed until the window is completely

closed.

To close in stages, press the button briefly.

71Windows, Sun roof

Picture no: 11190H.tif

Sun roof 3

Tilt crank out of recess.

To open:

Press unlocking button. Turn crank to left.

When the crank will not turn any further the

sun roof has reached the comfort position,

and air noise will be reduced.

To open beyond the comfort position:

press unlocking button again. Continue to

turn crank to the left.

To close:

Turn crank to rig ht.

When the crank will not turn any further the

sun roof has reached the comfort position.

Press unlocking button again and continue

to turn crank to right until sun roof is

closed.

The unlocking button is automatically

released when the sun roof reaches the

closed position.

To raise:

Close sun roof and press unlocking button.

Turn crank to rig ht.

To lower:

Turn crank to left.

The unlocking button is automatically

released when the sun roof reaches the

closed position.

After operating the sun roof, always return

the crank to the recess.

Picture no: 11191H.tif

Sun shade

The sun shade can be opened and closed

with the sun roof either closed or raised.

When the sun roof is opened, the sun shade

is also opened.

72 Climate control

Climate control

Picture no: 11200H.tif

Heating and ventilation system,

air conditioning system 3

Ventilation, heating and cooling 3 are

combined into one unit that is designed to

provide comfort regardless of the season,

weather or outside temperature.

When cooling 3 is activated, the air is

cooled and dried.

The heating unit heats the air as required in

all operating modes depending on the

position of the temperature switch. The air

supply can be adjusted to suit

requirements by means of the fan.

The slider for the air recirculation system

can be used to block the air supply from

outside.

Picture no: 11202H.tif

Button n for cooling (in temperature

rotary switch) is only found on vehicles

equipped with the optional air conditioning

system 3. See page 78.

Air vents ............................................... 73

Air recirculation system ....................... 74

Heated rear window Ü....................... 74

Heating and ventilation system ......... 75

Air conditioning system 3................... 78

Air intake .............................................. 80

Air outlet............................................... 80

Pollen filter 3........................................ 80

Note ...................................................... 80

Maintenance ........................................ 81

73Climate control

Picture no: 16185h.tif

Air vents

Pleasant ventilation of the head area is

achiev ed, depe nding on the p osition of the

tem perature switch a nd the air distrib ution

switch (L or M).

To increase the air supply, set the fan to a

higher speed and set the air distribution

switch to M.

Centre and side air vents (1)

The air flow can be directed as desired by

tilting and swivelling the slats.

Picture no: 11459h.tif

Open side vents: Turn knurled wheel

clockwise.

To close the side vents, turn knurled wheel

anticlockwise.

Picture no: 11460h.tif

Windscreen defroster nozzles (2)

Air distribution switch set to V or J:

Air is directed onto the windscreen and the

door windows.

Additional vents

Located in front of the windscreen, in front

of the door windows and in the front

footwell.

74 Climate control

Picture no: 11195H.tif

Air recirculation system

To activate:

Push slider to left 4, air supply from the

outside is blocked.

If fumes or unpleasant odours penetrate

from outside: temporarily switch on the air

recirculation system. To circulate the

passenger compartment air, switch on the

fan too.

The air recirculation system minimises the

entry of outside air. The humidity

increases, and the windows can mist up.

The quality of the passenger compa rtment

air deteriorates which may cause the

vehicle occupants to feel drowsy.

To deactivate:

Push slider to right 5, air is fed in from

the outside again.

Picture no: 11125H.tif

Heated rear window Ü

Operating using the fan switch:

On = Pull fan switch Ü

Off = Press fan switch Ü

Symbol illuminates when heated rear

window is switched on.

Heating operational only with engine

running.

Switch off as soon as rear vision is clear.

General in formation ,

as well as information on air

intake, air outlet,

pollen filter and maintenance,

see pages 80, 81.

75Climate control

Picture no: 11192H.tif

Heating and ventilation system

Left-hand rotary switch: Temperature

red zone = warm

blue zone = cold

Picture no: 11193H.tif

Centre rotary switch: Quantity of air

Four fan speeds:

x Off

4 Maximum air flow

The rate of air flow is determined by the

fan. The fan should therefore also be

switched on during a journey.

Picture no: 11194H.tif

Right-hand rotary switch: Air distribution

K to foot well

J to windscreen,

front door windows and

to foot well

V to windscreen and

front door windows

M to head area

L to head area and

footwell,

Open the air vents when the switch is

set to L or M.

76 Climate control

Picture no: 11200H.tif

Ventilation

z Set temperature switch to desired

setting.

z Switch fan on at desired setting.

z For maximum ventilation in head area:

Set air distribution switch to M and open

all vents.

z For ventilation to foot well: Set air

distribution switch to K .

z For simultaneous ventilation to the head

area and the foot well: Set air

distribution switch to L .

Heating

The amount of heat is dependent on the

engine temperature and is thus not fully

attained until the engine is warm.

For rapid warming of the passenger

compartment:

z Set the temperature switch in the red

zone.

z Set the fan to speed 3.

z Set the air distribution switch to the

desired position – see page 75.

The comfort and general well-being of the

vehicle occupants are to a large extent

dependent on a suitable ventilation and

heating setting.

77Climate control

Picture no: 11201H.tif

Heating the foot well

z Set the temperature switch in the red

zone.

z Switch on fan.

z Set air distribution switch to K.

z Keep side air vents closed during the

warming-up phase.

Picture no: 11126H.tif

Demisting and defrosting

the windows

z Turn the temp erature switch as far into

the red zone as possible,

z Set fan to 3 or 4,

z Set air distribution switch to V,

z Open side air vents as required and

direct them towards door windows,

z Switch on heated rear window Ü,

z For simultaneous warming of the foot

well, set air distribution switch to J.

9 Warning

Failure to follow the instructions could

lead to misted or icy windows and

accidents stemming from impa ired

visibility.

78 Climate control

Air conditioning system 3

As a supplement to the heating and

ventilation system, the air conditioning

system cools and dehumidifies (dries)

inflowing air.

If cooling or dehumidification is not

desired, switch off cooling in order to save

fuel.

At low outside temperatures the cooling

unit (air conditioning compressor) switches

off automatically.

Picture no: 12986h.tif

Cooling n

Operational only when engine is running.

On = Pull temperature switch n

Off = Press temp erature switch n

Control indicator in pushbutton.

Set the fan to the desired setting.

Picture no: 13482h.tif

Comfort setting

z Move air recirculation slider to right 5.

z Activate cooling n as desired.

z Set temperature switch to desired

setting.

z Set fan to desired speed.

z Set air distribution switch to M or L.

z Open side air vents as required.

79Climate control

Picture no: 11203H.tif

Maximum cooling

Open windows and sun roof 3 briefly so

that warm air can escape rapidly.

z Move air recirculation slider to left 4.

z Cooling on: pull n.

z Turn the temperature switch as far into

the blue zone (cold) as possible.

z Set fan to 4.

z Set air distribution switch to M.

z Open all vents.

Picture no: 11461h.tif

Demisting and defrosting windows

Misted or icy windows, e. g. due to damp

weather, damp clothing or low outside

temperatures:

z Move air recirculation slider to right 5.

z Cooling on: pull n,

z Set temperature switch to desired

setting,

z Set fan to desired speed,

z Set air distribution switch to V

– or –

if there is still moisture in the system after

previous air conditioning operation, the

windows may m ist up. To prev ent this,

set air distribution to K before starting

engine a nd set to V approx. 5 seconds

after starting.

z Switch on heated rear window Ü.

Operation with cooling (air conditioning

compressor) is not possible when outside

temperatures are low.

9 Warning

Failure to follow the instructions could

lead to misted or icy windows and

accidents stemming from impa ired

visibility.

80 Climate control

Picture no: 11196H.tif

Air intake

The air intakes in front of the windscreen on

the far left and right-hand sides of the

engine compartment must be kept free of

leaves, dirt and snow.

Air outlet

When transporting objects in the luggage

compartment, m ake sure the air outlets are

not covered.

Pollen filter 3

The pollen filter cleans the air entering from

outside, or if the air circulation system 3 is

switched on, filtering dust, soot, pollen and

spores out of the interior air.

The pollen filter must be replaced at the

intervals specified in the Service Booklet.

Note

If the windscreen mists up during damp

weather conditions, set the system as

described under "Window demisting". See

pages 77, 79.

The cooling system (air conditioning

compressor) only operates when the

eng ine is running.

Cooling 3 functions most efficiently when

the wind ow s a nd sun roof 3 are closed. If

the passenger compartment has heated

up considerably after a long period in

direct sunlight, briefly open the windows

and sun roof 3 so that the hot air can

escape quickly.

81Climate control

When cooling 3 (air conditioning

compressor) is switched on condensation

forms, which is expelled from the underside

of the vehicle.

At least one air vent must be open while

cooling 3 (air conditioning compressor) is

on in order to prevent the evaporator from

icing up due to lack of air movement.

Maintenance

In order to ensure consistently good

operation, the air conditioning

compressor 3 must be switched on for

several minutes once pe r month

irrespective of the weather or time of year.

Operation with cooling (air conditioning

compressor) 3 is not possible when outside

temperatures are low.

In the event of a fault, consult a workshop.

We recommend your Vauxhall Authorised

Repairer.

82 Drivin g Hints

Driving Hints

The first 600 miles

Drive your vehicle at various speed s. Do

not use full throttle. Never allow the engine

to labour at low revs.

Make good use of all gears. In all gears

depress the accelerator pedal a maximum

of around three quarters of the available

pedal travel.

Do not drive faster than three quarters of

maximum speed.

Do not b rake unnec essarily ha rd for the

first 125 miles.

Never coast with engine not

run ning

Many units will not function in this situation

(e.g. brake servo unit, power steering 3).

Driving in this manner is a danger to

yourself and others.

Brake servo unit

When the engine is not running, the brake

servo unit is no longer effective once the

brake pedal has been depressed once or

twice. Braking effect is not reduced, but

significantly greater force is required for

braking.

Electric power steering 3

If the power-assisted steering fails when

being towed with the engine switched off,

the vehicle can still be steered, but

considerably more force is required.

Driving in mountainous terrain or

with a trailer/caravan

The cooling fan is electrically operated. Its

cooling power is therefore independent of

the engine speed.

Since a considerable amount of heat is

generated at high engine speeds and less

at slower speeds, do not shift down when

climb ing hills whilst the vehic le is still coping

with the gradient in the higher gear.

Driving with a roof load

Do not exceed the permissible roof load

and maximum loading height, see

pages 102,150. For reasons of safety,

distribute the loa d evenly a nd secure it

properly with retaining straps so that it

cannot slip. Adjust the tyre pressure to

suit the load. Do not drive faster than 75

mph. Check and retighten the straps

frequently.

Switching off the engine

When you switch off, fans in the engine

compartment may continue running for a

time to cool the engine.

If the engine temperature is very high, e.g.

after driving in mountainous terrain: allow

the engine to idle for approximately two

minutes in order to prevent heat

accumulation.

83Driving Hints

Vehicles with turbocharged engine

After running at high engine speeds or high

engine loads, operate the engine briefly

at a low load or run in neutral for approx.

30 seconds before switching off in order to

protect the turbocharger.

Save energy – more miles

Please observe the running-in hints on the

previous page and the tips for energy

saving on the following pages.

Good, technically correct and economical

driving ensures maximum durability and

performance for your vehicle.

Overrun

The fuel supply is automatically shut off

during overrun, e.g. when the vehicle is

being driven down long gradients or when

braking. To enable the overrun cut-off to

take effect, do not accelerate during

overrun and do not de-clutch. To prevent

damage to the catalytic converter, overrun

cut-off is temporarily deactivated when the

catalytic converter temperature is high.

Vehicles with turbocharged engine

Flow -g enerated noises may be audible if

the accelerator is released quickly due to

air flow in the turbocharger.

Engine speed

Drive in a low engine speed range for each

gear as much as possible.

Warm ing up

Allow the engine to warm up while driving.

Do not warm it up by letting it run at idling

speed. Do not apply full throttle until the

engine has reached operating

temperature.

Correct gear selection

Do not race your engine whilst in neutral or

with a low gear selected. Driving too fast in

individual gears as well as stop-and-go

traffic increase engine wear and fuel

consumption.

Change down

When decreasing speed, shift down into

the next lowest gear. Do not slip the clutch

with a high-revving engine. This is

especially important when hill climbing.

Clutch operation

Always depress the clutch pedal hard to

the floor to prevent shifting difficulties and

transmission damage.

When driving do not use the pedal as a

foot rest; this will cause substantial clutch

wear.

Pedals

Do not place any objects in the foot well

which could slip under the pedals and

inhibit the pedal travel.

To ensure the pedal travel is uninhibited,

there must be no mats in the area of the

pedals.

Battery care

When driving slowly or when the vehicle is

stationary, e.g. in slow urban traffic, stop-

and-go traffic or traffic jams, turn off all

unnecessary electrical loads where

possible (e.g. heated rear window,

auxiliary headlights, etc.).

Declutch when starting in order to relieve

the strain on the starter and the battery.

84 Saving fuel, Protecting the environment

Saving fuel,

Protecting the

environment

Trend-setting technology

When developing and manufacturing your

vehicle, Vauxhall used environment-

friendly and predominantly recyclable

materials. The production methods used to

mak e your vehicle are likewise

environmentally-compatible.

Recycling of production wastes keeps the

circulation of material closed. Reduction of

energy and water requirements also helps

to conserve natural resources.

A highly advanced design means that your

vehicle can be easily disassembled at the

end of its service life, and the individual

materials separated for subsequent re -use.

Materials such as asbestos and cadmium

are not used . The refrigerant in the air

conditioning system 3 is CFC-free.

New painting techniques employ water as

a solvent.

End-of-life vehicle recovery

For detailed information on Vauxhall’s

on-going commitment to achieving an

environmentally susta inab le future,

including; design for recycling, take back of

End-of-Life Vehicle (ELVs) a nd the

recycling of ELVs, view

www.vauxhall.co.uk/recycling for details.

Energy and environment-

conscious driving

z High noise levels and exhaust emissions

are often a result of driving without due

attention to saving energy and

protecting the environment.

z You should therefore drive with energy in

mind – "more miles with less fuel".

Reduce the noise level and exhaust

emissions by adopting an environment-

conscious driving style. This is extremely

worthwhile and improves the quality of

life.

Fuel consumption depends to a great

extent on your own personal driving

style. The following hints will help you to

achieve fuel consumption as close as

possible to the specified levels – see

pages 148 to 149.

Check your vehicle’s fuel consumption

every time you refuel. This facilitates

early detection of any irregularities

causing increased fuel consumption.

Warming up

z Full throttle and warming up at idle

speed increase wear, fuel consumption,

exhaust em ission, the am ount of

pollutant in the exhaust and the amount

of noise.

z Drive off immediately after starting.

Warm up the engine by running it at

moderate engine speeds.

Uniform speed

z Hectic driving significantly increases fuel

consumption, the exhaust emissions, the

proportion of pollutant in the exhaust

gas and the noise level.

z Do not accelerate and brake

unnecessarily. Drive at uniform speed,

watching the road.

Avoid frequent starting off and stopping

e.g. at traffic lights, in short distance

traffic and in queues of traffic by means

of clever planning. Select roads with

good traffic flow.

Idling

z The engine also consumes fuel when

idling.

z If you have to wait for more than one

minute, it is worthwhile switching off the

engine. Five minutes of idling

corresponds to approximately one 0.6

miles of driving.

85Saving fuel, Protecting the environment

Overrun

z The fuel supply is automatically shut off

during overrun, e.g. when the vehicle is

being driven down long gradients or

when braking – see page 83.

z To enable the overrun cut-off to come

into action and save fuel, do not

accelerate or declutch during overrun.

Correct gear selection

z High revs increase engine wear and fuel

consumption.

z Do not race your engine. Avoid driving at

high engine speeds.

Making use of the tachometer 3 helps to

save fuel. Drive in a low engine speed

range for each gear as much as possible

with uniform engine speeds. Drive as

often as possible in top gear, select the

next higher gear as soon as possible,

and only change down when the engine

is no longer running perfectly smoothly.

High speed

z The higher the speed, the higher the

consumption and the noise level. At top

speed, you consume a great deal of fuel

and produce excessive noise and

exhaust emissions.

z Slightly releasing the accelerator pedal

results in distinct fuel savings with no

major loss of speed.

Drive at no more than around three

quarters of maximum speed and you will

use up to 50 % less fuel, without losing a

great deal of time.

Tyre pressure

z Inadequate tyre pressure, leading to

higher road resistance, costs money in

two ways: for more fuel and increased

tyre wear.

z Regular checks (every 14 days) pay off.

Electrical loads

z The power consumption of electrical

equipment increases fuel consumption.

z Switch off all auxiliary electrical loads

(e.g. air conditioning 3, heated rear

window) when not needed.

Roof racks

z Due to air resistance, a roof load can

increase fuel consumption by approx.

3.5 gals/h.

z Remove them if they are not being used.

Repair and maintenance

z Improper repairs or adjustment and

maintenance work can increase fuel

consumption. Do not carry out work on

the engine yourself.

You may out of ignorance infringe

environmental laws by not disposing of

materials properly.

Appropriate parts might not be recycled.

Contact with some of the materials

involved may pose a health hazard.

z We recommend that repair and

maintenance be entrusted to your

Vauxhall Authorised Repairer.

Extreme driving conditions

z Going up steep slopes, cornering, driving

on poor roads and winter driving all

increase fuel consumption.

z Fuel consumption increases dramatically

in urba n tra ffic a nd at winter

temperatures, especially on short trips

when the engine operating tempera ture

is not reached.

z Follow the hints given above to keep

consumption to a minimum under such

conditions.

86 Fuel consumption, fuel, refuelling

Fuel consumption,

fuel, refuelling

Fuel consumption

Fuel consumption is determined under

specific driving conditions – see page 148.

Fitting special equipment will increase the

weight of the vehicle. This in turn increases

fuel consumption and reduces the

specified maximum speed of the vehicle.

For the first few thousand miles, friction

between the engine and transmission

components is higher. This increases fuel

consumption.

Fuel for petrol engines

Commercially available high-quality fuel

with a maximum ethanol content of 5% as

per DIN EN 228 (catalytic converter - see

page88, octane numbers - see page 146).

Fuel quality has a decisive influence on

power output, running behaviour and

service life of the engine. The additives

contained in the fue l pla y an important role

in this regard. You should therefore only

use high-quality fuels containing additives.

Fuels with ethanol content greater than 5%

do not comply with DIN EN 228 and must

not be used unless the vehicle has been

specifically developed and approved for

use of such.

Fuel with too low an octane number can

cause ping ing. Va uxha ll cannot b e held

liable for resulting damage.

Petrol with a higher octane number can

always be used.

Pump nozzles for leaded fuel cannot be

inserted into the filler neck of vehicles that

operate on unlead ed fuel.

The ignition timing is automatically

adjusted according to the grad e of fuel

used (octane number) – see page 146.

Use of petrol with an octane rating of 95

will ensure economical driving.

Fuel consumption ................................ 86

Fuel for petrol engines ........................ 86

Fuel filler cap........................................ 87

Refuelling.............................................. 87

87Fuel consumption, fuel, refuelling

Fuel filler cap

If the fuel filler cap must be replaced, use

only the Genuine Vauxhall fuel filler cap

designed for your model to ensure that full

functionality is retained. Vehicles with

diesel engine have a special fuel filler cap.

Refuelling

The fuel tank filler neck with screw cap is

located on the left-hand side of the vehicle

in the rear quarter panel.

Open the tank flap.

To open, unlock the fuel filler cap with the

ignition key 3 and carefully unscrew so

that the excess pressure can slowly

dissipate.

Attach filler cap to bracket on flap and turn

to secure.

The fuel tank has a limiting system which

prevents overfilling of the tank.

Picture no: 12259h.tif

Correct filling depends to a large extent on

proper operation of the fuel dispensing

pump:

1. Fully insert the pump nozzle and switch it

on.

2. After the automatic cut-off, another two

litres (max.) can be topped up in stages.

To close, replace filler cap and turn,

overcoming the resistance, until the lock on

the cap engages audibly. Lock filler cap

with ignition key 3.

Close fuel tank cover.

Wipe off any overflowing fuel immediately.

9 Warning

Care must b e tak en when ha ndling fuel.

Before refuelling, switch off engine and

any external heaters with combustion

chambers before refuelling. Switch

mobile phones off.

Fuel is flamm able and ex plosive. avoid

naked flames or sparks when handling

fuel or just in its vicinity. Do not smoke.

This also applies where fuel is perceptible

only from its characteristic odour. If fuel

odours occur in the vehicle itself,

eliminate the cause immediately. We

recommend your Vuxhall Authorised

Repairer.

88 Catalytic converter, exhaust gases

Catalytic converter,

exhaust gases

Picture no: 6448U.tif

Catalytic converter for petrol

engines

Leaded fuel will damage the catalytic

converter and parts of the electronic

system, rendering them inoperative.

Use of high-quality fuels other than those

specified on page 86 (e.g. LRP

) could

damage the catalytic converter.

On vehicles with a catalytic converter, the

fuel tank filler neck is of a narrow design so

that a dispensing pump for leaded fuel

cannot be inserted.

Damage to the catalytic converter or the

vehicle may result if the following points

are not observed:

z Consult a workshop, such as your

Vauxhall Authorised Repairer, as quickly

as possible in the event of misfiring,

irregular engine running following a cold

start, a significant loss of engine power

or other unusual malfunctions which

may indicate a fault in the ignition

system. If necessary, d riv ing may be

continued for a short time at a low speed

and with a low engine speed.

z If unburnt fuel enters the catalytic

converter, this may result in overheating

and irreparable damage to the catalytic

converter.

You should therefore avoid

unnecessarily long use of the starter

when starting off, running the tank dry

(an irregular fuel supply will lead to

overheating) and starting the engine by

pushing or towing.

Catalytic converter for petrol engines 88

Controlling exhaust emission.............. 89

Exhaust ga ses...................................... 90

Maintenance ........................................ 91

LRP = Lead Replacement Petrol.

89Catalytic converter, exhaust gases

z If emission control indicator Z flashes,

slow down until the flashing stops and

the control indicator shines with a stea dy

glow . Contact a workshop im media tely.

We recommend your Vauxhall

Authorised Repairer – see Emission

control indicator Z.

Picture no: 16178h.tif

Controlling exhaust emission

Through design-related measures – mainly

in the area of the fuel-injection and ignition

systems – the prop ortion of noxious

materials in the exhaust, such as carbon

monoxide (CO), hydrocarbons (HC) and

nitrogen oxides (NO

), is reduced to a

minimum.

Picture no: 12948h.tif

Control indicator Z for exhaust gases

Illuminates when ignition is switched on

and during start attempt. Goes out shortly

after engine starts.

If it illuminates while the engine running

there is a fault in the emission control

system. The permitted emission values may

be exceeded. Consult a workshop

immediately. We recommend your

Vauxhall Authorised Repairer.

Flashing with the engine running indicates

a fault that may damage the catalytic

converter. You can continue to drive

without causing damage by slowing down

until the flashing stops and the control

indicator is steady. Consult a workshop

immediately. We recommend that you

consult an Vauxhall Authorised Repairer.

90 Catalytic converter, exhaust gases

Picture no: 12943h.tif

Control indicator A for engine

electronics

Illuminates for a few seconds when the

ignition is switched on.

If it illuminates when the engine is running,

there is a fault in the engine electronics

system. The electronics switch to limp-

home mode, fuel consumption may

increase and the driveability of the vehicle

may be impaired.

In some case s, the fault can be rem edie d

by switching the engine off and on again. If

the control indicator illuminates again

when the engine is running, consult a

workshop to have the cause of the fault

remedied. We recommend your Vauxhall

Authorised Repairer.

If it illum ina te s briefly , but does not re cur, it

is of no significance.

If it flashes after the ignition is switched on,

there is a fault in the immobiliser system.

The engine cannot be started – see

page 29.

Exhaust gases

When the vehicle is driven for the first time,

wax and oil on the exhaust system m ay

evaporate, producing smoke. After driving

the vehicle for the first time, allow it to

stand in open air to allow the fumes to

evaporate and do not inhale.

9 Warning

Engine exhaust gases contain poisonous

carbon monoxide, w hich is colourless and

odourless and could be fatal if inhaled.

If exhaust fumes penetrate the vehicle

interior, open the windows and consult a

workshop immediately. We recommend

your Vauxhall Authorised Repairer.

91Catalytic converter, exhaust gases

Maintenance

Have all maintenance work carried out at

the intervals specified by Vauxhall. We

recommend that you entrust this work to

your Vauxhall Authorised Repairer, who

has proper equipment and trained

personnel available. Electronic testing

systems permit rapid diagnosis and

remedy of faults. This way you can be

certain that all components of the vehicle’s

electrical, injection and ignition systems

operate correctly, that your vehicle has a

low level of pollutant emission and that the

catalytic converter system will have a long

service life.

You are thereby making an important

contribution towards keeping the air clean

and compliance with emissions legislation.

Checking and adjustment of the fuel-

injection and ignition systems is part of the

scope of inspection. For this reason you

should have all maintenance work carried

out at the intervals specified in your Service

Booklet.

92 Brakes

Brakes

Brake system

The brakes are an important factor for

traffic safety.

To improve effectiveness, do not brake

unnecessarily hard for the first 120 miles

(200 km) after new brake pads have been

fitted.

Brake pad wear must not exceed a

specified limit. Regular maintenance as

detailed in the Service Booklet is therefore

of the utmost importance for traffic safety.

Have worn brake pads replaced. We

recommend that you consult your Vauxhall

Authorised Repairer, who will fit pads that

have been tested and approved by

Vauxhall and guarantee optimum braking

power.

Brake pads that have worn down to the

minimum thickness will squeal. Driving may

be continued. Have the brake pads

replaced as soon as possible. Consult a

workshop for brake pad replacement. We

recommend your Vauxhall Authorised

Repairer.

Picture no: 11209H.t if

Foot brake

The foot brak e comprises two independent

brake circuits.

If a brake circuit fails, the vehicle can still be

braked using the other brake circuit. If this

occurs, however, the brake pedal must be

depressed quite far using considerable

force before braking effect occurs. The

distance required for braking will be

greater. Consult a workshop before

continuing your journey. We recommend

your Vauxhall Authorised Repairer.

To ensure the full pedal travel can be

utilized, especially in case of a fault in one

of the brake circuits, there must be no mats

in the vicinity of the p edals – see page 83.

Brake system ........................................ 92

Anti-lock brake system (ABS u) 3.... 94

93Brakes

When the engine is not running, the

support of the brake servo unit disappears

once the brake pedal has been depressed

once or twice. Braking effect is not

reduced, but braking requires significantly

greater force. This is especially important

to bear in mind when tow ing.

Check the brake lights before starting out

on a journey.

Shortly after starting each journey the

effectiveness of the brake system should

be tested at low speed and without

inconveniencing other traffic, especially if

the brakes are wet, e.g. after the vehicle

ha s b ee n washed.

The brake fluid level should be checked

regularly. If the brake fluid level is too low

and the hand brake is not applied, control

indicator R on the instrument panel

illuminates – see page 20.

Picture no: 13483h.tif

Hand brake

Always apply hand brake firmly. On slopes

apply the hand brake as firmly as possible.

The mechanical hand brake acts on the

brakes on the rear wheels. It engages

automatically when applied.

To release the hand brake pull the lever up

slightly, press the ratchet knob, and fully

lower the lever.

94 Brakes

Picture no: 12949h.tif

Brak e system control i ndicat or R

The control indicator illuminates when the

ignition is switched on if the hand brake is

applied or if the brake fluid level is too low.

Brake fluid level - see page 136.

Anti-lock brake system (ABS u) 3

ABS continually monitors the brake system

and p revents the wheels from lock ing

regardless of the type of road surface or

tyre grip.

It starts to regulate the braking pressure as

soon as a wheel shows a tendency to lock.

The vehicle rema ins steerable, even in the

event of very heavy braking, for instance

on bends or when swerving to avoid an

obstacle. Even in the case of full-on

braking, the ABS makes it possible to drive

round an obstacle without releasing the

brakes.

ABS control is made apparent though a

pulse in the brake pedal and the noise of

the regulation process.

9 Warning

If the control indicator illuminates when

the hand brake is not applied: Stop.

Interrupt your journey immediately.

Consult a workshop. We recommend your

Vauxhall Authorised Repairer.

Illuminated together with the control

indicator for the Anti-lock Brake

System u: the braking force on the rear

wheels is not be ing re gulated. The vehicle

may swerve during braking. Have the

cause of the fault remedied. We

recommend that you consult your

Vauxhall Authorised Repairer.

95Brakes

Picture no: 12950h.tif

Control indicator u for ABS

When the ignition is switched on, the

control indicator illuminates for a few

seconds while the system performs a self-

check, which m ay be audible . The system is

re ady for operatio n wh en the con trol

indicator goes out.

If the control indicator does not go out

afte r a few sec onds, or if it illuminates while

driving, there is a fault in the ABS. The

brake system rem ains operational without

AB S reg ulation.

You can continue driving, provided you

drive with care and anticipation.

Have the cause of the fault remedied. We

recommend that you consult your Vauxhall

Authorised Repa irer. The system’s

integrated self-diagnostics allows faults to

be quickly remedied.

9 Warning

For optimum braking, keep the brake

pedal fully depressed throughout the

braking process, despite the fact that the

pedal is pulsating. Do not reduce the

pressure on the pedal.

Do not let this special safety feature

tempt you into taking risks when driving.

Traffic safety can only be achieved by

adopting a responsible driving style.

9 Warning

If there is a fault in ABS, the wheels may

be subject to locking due to braking that

is heavier than normal. The advantages

of ABS are no longer operational. The

vehicle can no longer be steered and may

swerve .

9 Warning

If the ABS control indicator illuminates

tog ether with the control indicator for the

brake system R, the braking force on the

rear wheels is not being regulated. The

vehicle may swerve during braking. Have

the cause of the fault remedied. We

recommend that you consult your

Vauxhall Authorised Repairer.

96 Wheels, Tyres

Wheels, Tyres

Tyres

See page 152 for suitable tyres and

re s triction s .

Tyres fitted in the factory are adapted to

the chassis and provide optimum driving

comfort and safety.

Changing tyre/wheel type

Before switching to different tyres or

wheels, seek advice on the technical

possibilities. We recommend that you

consult y our Va uxha ll Authorised Repairer,

who will be able to advise you of any

necessary modifications.

Fitting new tyres

Fit tyres in pairs or in sets, which is even

better. Ensure that tyres on one axle are

z the same size

z the same design

z the same make

z and have the same tread pattern.

Fit directional tyres such that they roll in the

direction of travel. The rolling direction is

indicated by a symbol (e.g. an arrow) on

the sidewall.

Tyres fitted opposing the rolling direction

(e.g. when a wheel is changed) should be

refitted as soon as possible. This is the only

way to benefit fully from the design

properties of the tyres. Tyre pressure........................................ 97

Tyre condition, wheel condition ......... 98

Winter tyres 3...................................... 100

Wheel covers 3 .................................... 100

Tyre chains 3....................................... 100

9 Warning

Use of unsuitable tyres or wheels may

lead to accidents and render the vehicle

unroadworthy.

9 Warning

We recommend that you have your tyres

changed by your Vauxhall Authorised

Repairer, who will be familiar with the

requirements of the law a s regards

disposal of tyres and can thus help to

protect the environment and your health.

97Wheels, Tyres

Some brands of tyres have a beaded edge

for alloy wheels to protect against

dam age. If wheel covers are used on steel

wheels with bead ed-edge tyres, the

following requirements must be fulfilled:

z Use of wheel trims and tyres that

approved by Vauxhall for the vehicle in

question and thereby fulfil all

requirements for the wheel and tyre

combination.

z If the wheel covers and tyres used are

not Vauxhall-approved, the tyres must

not have a beaded edge.

Picture no: 13484h.tif

Tyre pressure

Check tyre pressures, including the spare

wheel, at least every 14 days and prior to

any long journey; the tyres should be

checked when cold. Don’t forget to check

the spare.

For tyre pressures refer to page 152 and

the adhesive label on the left-side front

door frame. After changing tyre sizes, have

the label replaced.

Do not reduce tyre pressure when the tyres

are wa rm. Otherwise the pressure may

drop below the permissible minimum when

the tyres cool down.

Securely retighten valve caps after

checking the tyre pressures.

Picture no: 9358T.tif

Incorrect inflation pressures will impair

safety, vehicle handling, comfort and fuel

economy and will increase tyre wear.

If the pressure is too low, this can result in

considerable tyre warm-up and internal

damage, leading to tread separation and

even to tyre blow-out at high speeds.

Hidden tyre damage is not eliminated by

adjusting inflation pressure.

9 Warning

Use of unsuitable tyres or wheel covers

could lead to sudden pressure loss and

thereby accidents.

9 Warning

Incorre ct ty re pressure could lead to a flat

tyre.

98 Wheels, Tyres

Picture no: 15941s.tif

Tyre condition, wheel condition

Drive over edges slowly and at a right

angle if p ossible. Driving ov er sharp edges

can lead to hidden tyre damage and wheel

damage which is only noticed later on.

When pa rk ing, ensure that the tyres a re not

pressed against the edge of the kerb.

Check tyres regularly for damage (foreign

bodies, punctures, cuts, cracks, bulges in

sidewalls). Check wheels for damage. In

the event of damage or abnormal wear,

consult a workshop. We recommend your

Vauxhall Authorised Repairer.

Picture no: 6456U.tif

Tread depth

Check tread depth regularly.

If wear in the front is greater than that in

the rear, move the rear wheels to the front

axle and vice versa.

Correct tyre pressure.

For reasons of safety, tyres should be

replaced when their tread depth has worn

down to 2 to 3 mm (winter tyres: 4 mm).

9 Warning

Damage may lead to tyre blow-out.

99Wheels, Tyres

Picture no: 6457U.tif

The legally permissible minimum tread

depth (1.6 mm) has been reached when

the tread has worn down as far as one of

the wear indicators (TWI

). A number of

wear indicators are spaced at equal

intervals around the tyre within the tread.

Their position is indicated by markings on

the tyre sidewall.

General information

z The danger of aquaplaning is greater if

the tyres are worn.

z Tyres age, even if they are used only very

little or not at all. A spare wheel which

has not been used for six years should be

used only in emergencies; drive slowly

when using such tyres.

z Never fit used tyres the previous history

and use of which you do not know.

z So as not to impair brake cooling, use

only wheel trims approved for use on

your vehicle.

Tyre designations

Meanings:

e.g. 155/65 R 14 75 S

155 = Tyre width in mm

65 = Aspect ratio

(tyre height to tyre width in %)

R = Belt type: Radial

14 = Wheel d iameter in inches

75 =Load index

Ex. 75 = 390 kg

S =Speed code

Speed code letters:

Q Up to 100 mph

S Up to 112 mph

T Up to 118 mph

H Up to 130 mph

V Up to 150 mph

W Up to 168 mph

TWI = Trea d Wear Indicator.

100 Wheels, Tyres

Winter tyres 3

Information on fitting new tyres – see

page 96.

See page 152 for restrictions.

Winter tyres im prove safety at

tem peratures below 7 °C and should

therefore be fitted on all the wheels.

The d esign of summ er tyres mea ns they

have limited qualities for winter driving.

If the maximum permissible speed for the

winter tyres is less than that of the vehicle,

a notice indicating the maximum

permissible speed for the tyres must be

affixed within the driver’s field of vision

If you use the spare wheel when it is fitted

with a summer tyre, the vehicle’s

driveability may be affected, especially on

slippery road surfaces. Obtain a

replacement for the faulty tyre as soon as

possible, and have the wheel balanced

and fitted to the vehicle.

Wheel covers 3

If the wheel trims and tyres used are not

Vauxhall-approved, make sure that the

tyres do not have a beaded edge – see

page 96.

Picture no: 6459u.tif

Tyre chains 3

See page 152 for restrictions.

Tyre chains are permitted on the front

wheels. They must be fitted to the tyres

symm etrically in order to achiev e a

concentric fit.

Use fine mesh chains. See page 152.

We recommend that you consult your

Vauxhall Authorised Repairer.

Varies from country to country on account of

national regulations .

101Wheels, Tyres

Wheel trim on steel wheels could come into

contact with parts of the chain and be

damaged. Remove the wheel trim – see

page 114.

Tyre chains may only be used at speeds up

to 30 mph and, when travelling on roads

that are free of snow, they may be used for

brief periods only since they are subject to

rapid wear on a hard road and may snap.

Temporary spare wheel 3

Tyre chains must not be used on the

temporary spare wheel. If you need to use

tyre chains after suffering a flat front tyre,

fit the temporary spare on the rear axle

and transfer one of the rear wheels to the

front ax le .

For notes on the temporary spare wheel –

see page 111.

Wheel changing – see page 114.

Correcting tyre pressure – see

pages 97, 152.

102 Roof racks, caravan and trailer towing

Roof racks,

caravan and trailer

towing

Roof racks 3

For reasons of safety and to avoid

damaging the roof, we recommend that

you use the Vauxhall roof rack system

approved for your vehicle. Consult your

Vauxhall Authorised Repairer.

Fasten the roof rack following the

instructions that accompany the system.

Driving hints – see page 82.

Towing eq uipm ent 3........................... 103

Caravan/trailer loads .......................... 103

Coupling socket load........................... 104

Rear axle load during towing ............. 104

Tyre pressure........................................ 104

Driving characteristics, towing tips .... 104

Starting on inclines .............................. 105

9 Warning

Disregard of these notes can lead to

injuries which may be fatal. Vehicle

passengers should be informed

accordingly.

103Roof racks, caravan and trailer towing

Towing equipment 3

Use only towing equipment that has been

approved for your vehicle. We recommend

entrusting the retrofitting of towing

equipment to your Vauxhall Authorised

Repairer, who will advise you on any

possible towed load increases. Your

Vauxhall Authorised Repairer has

instructions on how to install the towing

equipment and make any necessary

changes to the vehicle that affect the

cooling system, heat shields or other

equipment.

Mounting dimensions of towing equipment

– see page 157.

Caravan/trailer loads

The permissible caravan/trailer loads are

vehicle-dependent and engine-dependent

maximum values which must not be

exceeded. The actual caravan/trailer load

is the difference between the actual gross

weight of the caravan/trailer and the

actual coupling socket load with the

caravan/trailer coupled. When the

caravan/trailer load is being checked,

therefore, only the carava n/trailer wheels –

and not the jockey wheel – must be

standing on the weighing apparatus.

The permissible caravan/trailer loads for

your vehicle are given in the vehicle

documents. Unless otherwise stated, they

are valid for gradients up to max. 12 %.

The permissible caravan/trailer load should

be fully utilised only by drivers who are

adequately experienced in towing large or

heavy caravans/trailers.

The permitted caravan and trailer load

applies up to the specified incline and up to

an altitude of 1000 metres above sea level.

Since engine power decreases as altitude

increases because of the air becoming

thinner, therefore reducing climb ing ability,

the permitted towing weight also

decreases by 10 % for every 1000 metres of

additional altitude commenced. The

towing weight does not have to be reduced

when driving on roads with slight inclines

(less than 8%, e.g. motorways).

The actual caravan/trailer load plus the

actual gross weight of the towing vehicle

must not exceed the maximum permitted

towing weight. For exa mple, if the

permitted gross vehicle weight is utilised,

the trailer/caravan load must only be used

until the maximum permitted towing

weight is reached. The maximum

permitted towing weight is shown on the

identification plate, see page 144.

Obs erve na tiona l regula tio ns.

104 Roof racks, caravan and trailer towing

Coupling socket load

The coupling socket load is the load

exerted by the trailer/caravan on the

coupling ball. It can be varied by changing

the weight distribution when loading the

trailer/caravan.

The maximum permissible coupling socket

load (35 kg) for the towing vehicle is stated

on the type plate of the towing equipment

and in the vehicle documents. Always aim

for this. The coupling load should never be

less than 25 kg.

When measuring the coupling socket load,

make sure that the drawbar of the loaded

trailer/caravan is at the same height as it

will be when the trailer/caravan is coupled

with the towing vehicle loaded. Particularly

important for trailers/caravans with

tandem axle.

Rear axle load during towing

When the caravan/trailer is coupled and

the towing vehicle fully loaded (including

all occupants), the permissible rear axle

load (see identification plate, page 144, or

vehicle documents) may be exceeded by

15 kg and the permissible gross vehicle

weight by 27 kg. If the permissible rear axle

load is exceeded, a maximum speed of 50

mph (80 km/h) applies. If national

regulations specify a lower maximum

speed for vehicles towing a caravan/trailer,

this must be observed.

Picture no: 9358t.tif

Tyre pressure

Increase the tyre pressure on the towing

vehicle to the value specified for a full load

– see page 152. Also check the pressure of

the spare wheel and caravan/trailer

wheels.

Driving characteristics, towing

tips

In the case of trailers/caravans with brake,

attach breakaway stopping cable to eye at

the side on the coupling ball bar.

Before attaching the trailer/caravan,

lubricate the ball of the trailer/caravan

towing device. However, do not lubricate

the ball if a stabiliser, which acts on the

coupling ball, is being used to damp

snaking.

Check caravan/trailer lighting before

starting to drive. The fog tail lights on the

vehicle are deactivated when towing a

caravan or trailer.

Trailers with LED turn signals must have a

provision enables light monitoring for

commercial bulbs.

Turn signal control indicator – see page 19.

105Roof racks, caravan and trailer towing

Handling is greatly influenced by the

loading of the trailer/caravan. Loads

should therefore be secured so that they

cannot slip and be placed in the centre of

the trailer/caravan if possible, i.e. above

the axle.

In the case of trailers/caravans with low

directional stability, a speed of 50 mph

(80 km/h) should not be exceeded; the use

of a stabilizer which functions acc ording to

the friction principle is strongly

recommended.

Do not drive faster than 50 mph (80 km/h)

if possible, even in countries where higher

speeds are p ermitted .

Make sure that you have enough room

when cornering and avoid sudden

manoeuvres.

If the trailer/caravan starts to sway, drive

more slowly, do not attempt to correct the

steering and brake sharply if necessary.

If it is necessary to apply the brakes fully,

depress the brake pedal as hard as

possible.

Remember that the braking distance for

vehicles towing caravans/trailers with and

without brake is always greater than that

for vehicles not towing a caravan/trailer.

When driving downhill, towing a caravan/

trailer subjects the brakes to a heavier load

than normal. For this reason, select the

same gear as when driving uphill and drive

at a similar speed.

The cooling fan is electrically operated. Its

cooling power is therefore independent of

the engine speed.

Since a considerable amount of heat is

generated at high engine speeds and less

at slower speeds, do not shift down when

climbing hills whilst the vehicle is still coping

with the gradient in the higher gear.

Diesel engine: On gradients of 10 % or

more, do not drive faster than 20 mph

(30 km/h) in 1st gear or 30 mph (50km/h)

in 2nd gear.

Picture no: 11804h.tif

Starting on inclines

The most favourable engine speed when

starting off on an incline is between 2500

and 3000 rpm for petrol engines and

between 2000 and 2500 rpm for diesel

eng ines. Hold e ngine rpm constant, ease

the clutch out gradually, release brake –

and open throttle. If possible, the engine

speed should not drop during this

procedure.

Before starting off under extreme

conditions (high combination weight,

mountainous terrain with steep inclines),

switch off all unnecessary electrical loads

(e.g. heated rear window, air conditioning

system 3).

106 Self-help

Self-help

Starting

Do not start with quick charger

This prevents damage to electronic

components.

Do not start by

pushing or towing

Because your vehicle is fitted with a

catalytic converter, it must not be started

by pushing or towing – see page 88.

The vehicle can only be started using jum p

leads – see following page.

Starting the engine with jump leads 3 107

Towing the vehicle............................... 108

Towing service ..................................... 109

Towing another vehicle....................... 109

First-aid kit (cushion) + 3 and

warning triangle ¨ 3 ....................... 110

Vehicle tools ......................................... 111

Spare wheel.......................................... 111

Jac k....................................................... 113

Changing wheels ................................. 114

Electrical system .................................. 118

Fuses ..................................................... 118

Bulb replacement ................................ 122

Halogen headlight system.................. 122

Tail lights .............................................. 124

Additional brake light 3 ..................... 125

Number plate light .............................. 126

Courtesy lig ht ....................................... 126

9 Warning

Disregard of these notes can lead to

injuries which may be fatal. Vehicle

passengers should be informed

accordingly.

107Self-help

Starting the engine with jump

leads 3

A vehicle with a discharged battery can be

started using jump lead s and the battery of

another vehicle.

z Never expose the battery to naked

flames or sparks.

z A discharged battery can freeze at

temperatures below 0° C or as high as

0° C. Defrost the battery before

connecting jump leads.

z Do not allow battery fluid to come into

contact with eyes, skin, fabrics or

painted surfaces. The fluid contains

sulphuric acid which can cause injuries

and damage in the event of direct

contact.

z Wear eye protection and protective

clothing when handling a battery.

z Use auxiliary battery with same voltage

(12 volts). Its capacity (Ah) must not be

considerably less than that of the

discharged battery. Voltage and

capacity information can be found on

the batteries.

z Use jump leads with insulated terminals

and a cross section of at least 16 mm

z Do not disconnect the discharged

battery from the vehicle.

z Switch off all unnecessary electrical

consumers.

z Do not lean over the ba ttery during jump

starting.

z Do not allow the terminals of one lead to

touch those of the other lead.

z Do not touch the vehicles while jump

starting.

z Apply hand brake. Transmission in

neutral.

9 Warning

Th i s mu s t b e d on e w i t h e xt r e m e c a r e . A n y

deviation from the following instructions

could lead to personal injury or damage

resulting from battery explosion, as well

as to damage to the electrical systems in

both vehicles.

108 Self-help

Connect the lea ds in the order shown in the

illustration:

1. Connect one end of the first jump lead to

the positive terminal 1 of the battery

providing the jump start (identified by

"+" sign on battery case or terminal).

2. Connect the other end of this lead to the

positive terminal 2 of the discharged

battery ("+" sign).

3. Connect the first end of the other jump

lead to the negative terminal 3 of the

battery providing the start ("–" sign).

4. Connect the other end of the second

jump lead 4 to ground on the other

vehicle, e.g. engine block or screw

connection in the engine suspension.

z Do not connect leads to negative

terminal of discharged battery!

z The connection point should be as far

away from the discharged battery as

possible.

z Route the leads so that they cannot

catch on rotating parts in the engine

compartment.

z Start the engine of the vehicle providing

the jump start.

z After 5 minutes, start the other engine.

Start attempts should be made at

intervals of 1 minute and should not last

longer than 15 seconds.

z After starting, allow both engines to idle

for approx. 3 minutes with the leads

connected.

z In order to avoid excess voltage in the

electrical system, before removing a

lead, switch on an electrical consumer

(e.g. light, heated rear window) in the

vehicle receiving the jump start.

z Reverse above sequence exactly when

removing leads.

Towing the vehicle

The towing eye is located behind a flap. To

open, release the flap at the bottom and

pull downward. To close, position the flap

at the top and engage at the bottom.

Attach a tow rope3 – or better still a tow

rod 3 – to the towing eye.

The tow ing eye is only to be used for

towing, not for recovery.

109Self-help

Switch on ignition to release steering

column lock and to permit operation of

brake lights, horn and windscreen wipers.

Manual transmission in neutral.

Drive slowly. Do not drive jerkily. Excessive

tractive force can damage the vehicle.

To prevent the entry of exhaust fumes from

the towing vehicle, switch on the air

recirculation system and close the

windows.

Consult a workshop. We recommend your

Vauxhall Authorised Repairer, who will

serve you best to get your vehicle back on

the road.

Towing service

Entrust your vehicle only to the towing

se rvice of your choice and obta in a n

estimate of towing costs before employing

any towing service. In this way you avoid

unnecessary costs and possible insurance

problems during claim processing.

Towing

another vehicle

Towing eye at rear in centre, below the

bumper.

Attach tow rope 3 – or, better still, tow

rod 3 – to the towing eye, never to the rear

axle.

Drive off slowly and avoid jerky

movements. Impermissible tractive forces

could damage the vehicles.

9 Warning

Significantly greater force is required for

braking: the brake servo unit is only

operational when the engine is running.

Considerably greater steering force is

necessary since this unit is operative only

when the engine is running.

110 Self-help

First-aid kit (cushion) + 3

and warning triangle ¨ 3

Stow the first-aid kit (cushion) in the

storage net 3 on the right side panel of the

luggage compartment.

The warning triangle is stowed in a recess

on the rear panel under the luggage

compartment floor covering.

To raise the floor covering, first remove the

storage box 3 – see page 45. Unclip the

floor covering and fold it forwards – see

next page.

To close the compartment fold down the

floor c ov ering, insert it in the rec esses at the

rear and clip it into place – see next page.

Refit storage box 3.

When loading the vehicle, always make

sure the first-aid kit is accessible.

Notes on loading

see page 48.

111Self-help

Vehicle tools

The vehicle tools have been specially

developed for your vehicle and should only

be used for such.

The vehicle tools are stowed in the luggage

compartment under a floor cover. To raise

the floor cover, first remove the

storage box 3, see page 45. Raise the floor

cover.

The vehic le tools are stowed betw een the

jack and the rear panel of the luggage

compartment.

To close the compartment fold down the

floor c ov ering, insert it in the rec esses at the

rear and clip it into place. Refit

storage box 3.

Spare wheel

The spare wheel is stowed in the luggage

compa rtm ent under a floor cover and is

secured by a wing nut. To open the floor

cover, first remove the storage box 3 (see

page 45). Raise the floor cover.

Release wing nut and remove.

Change the wheel. Stow the replaced

wheel in the vehicle and secure it in place.

Fold down the floor cover and insert it in

the recesses at the rear. Refit the

storagebox 3.

112 Self-help

General information

On vehicles with alloy wheels 3 the spare

wheel may have a steel rim.

If you use winter tyres 3, the spare wheel

may still be fitted with a summer tyre. If you

use the spare wheel the vehicle’s handling

may be altered. Obtain a replacement for

the faulty tyre as soon as possible, and

have the wheel balanced and fitted to the

vehicle.

The spare wheel may have a smaller tyre

and a smaller rim than the wheels m ounted

on the vehicle

: Using the spare wheel

may alter vehicle handling. Have the

defective tyre replaced as soon as possible,

balance the wheel and have it mounted on

the vehicle.

Notes on directional tyres 3

Directional tyres only provide maximum

pe rforma nce w he n th ey are mounted in th e

correct direction of rotation. If the tyres or

spare wheel must be mounted opposing

the specified direction of rotation (e.g.

after changing a flat tyre), observe the

following:

z Vehicle handling may change. Have the

defective tyre replaced as soon as

possible, and have the wheel balanced

and mounted on the vehicle.

z Do not drive faster than 50 mph

(80 km/h).

z Be especially careful when driving in rain

and snow.

Further information on directional tyres -

see page 96.

Country-specific version: The spare wheel is

only to be used as a temporary spare wheel.

113Self-help

Jack

The jack has been specially developed for

your vehicle and should only be used for

such. The jack is only suitable for use when

changing wheels.

The jack is stowed in the luggage

compartment under a floor cover. To open

the floor cover, first remove the

storage box 3 (see page 45). Raise the

floor cover.

Taking out the spare wheel – see page111.

The jack is secured by a bracket in front of

the rear panel of the luggage

compartment. Turn the threaded rod to

release the jack and then remove it.

To refit the jack, position it underneath the

bracket and secure it by turning the

threaded rod.

Replace the spare wheel, fold down the

floor cover, insert it in the recesses at the

rear, see previous page. Refit storage

box 3.

114 Self-help

Changing wheels

To ensure your safety, make the following

preparations and observe the following

information when changing wheels:

z Park the vehicle on a level, firm and non-

skid surface.

z Switch on the hazard warning lights,

apply the hand brake, engage 1st gear

or re verse .

z Correctly set up the warning triangle.

Warning triangle – see page 110.

z Take the spare wheel from the luggage

compartment.

z Before raising the vehicle, set the front

wheels to the straight-ahead position.

z Slacken the wheel bolts one half turn

before raising the vehicle, but do not

totally unscrew the bolts.

z Never change more than one wheel at

once .

z Block the wheel diagonally opposite the

wheel to be changed by placing wedge

blocks or equivalent in front and behind

the wheel.

z Use the jack only to change wheels.

z If the ground on which the vehicle is

standing is soft, a solid board (max. 1 cm

thick) should be placed under the jack.

Using a thicker b oard c ould damage the

jack and the vehicle.

z No people or animals may be in the

vehicle when it is jacked up.

z Never crawl under a jacked-up vehicle.

z Do not start or run the engine while the

vehicle is on the jack.

z Fully tighten the wheel bolts after

lowering the vehicle.

115Self-help

1. Prise off the wheel cover 3 with the flat

end of the crank from the v ehicle tools.

Vehicle tools – see page 111.

Alloy w heels 3: Disengage the wheel bolt

caps with a screwdriver and remove from

the wheel bolts. Protect the wheel by

inserting a soft cloth between the

screwdriver and alloy wheel.

Alloy wheels with anti-theft lock 3: Release

the hub cap using the key found in the

vehicle tools or in the glove compartment

and remove it.

116 Self-help

2. Slacken wheel bolts using a wheel bolt

socket wrench, putting socket wrench on

as far as it will go.

3. Locators at the front and rear on the

vehicle underbody – each between two

markings – indicate the points where the

jack is to be attached.

4. Before positioning the jack, set it to the

necessary height by rotating the eye by

hand. Position the jack at the front or

rear so that the jack claw spans the

vertical base between the markings and

grips in the recess in the vertical base.

Make sure it is properly positioned.

The jack base must be on the ground

directly below the jacking point in a

manner that prevents it from slipping.

117Self-help

Attach the crank in the hole in the

threaded rod and fit the eye of the wheel

bolt wrench on the cra nk .

Raise vehicle by turning crank.

If this is not the case, carefully lower the

vehicle immediately and rep osition the

ja ck.

5. Unscrew wheel bolts and put somewhere

where the threads will not be soiled.

6. Change the wheel. For further

information – see pages 96, 111, 114.

7. Screw in wheel bolts and tighten slightly,

inserting the wheel bolt wrench as far as

the stop.

8. Lower v ehicle.

9. Tighten wheel bolts crosswise, putting on

wheel bolt wrench as far as possible.

10. Align and refit wheel cover 3.

Before refitting the wheel cover clean

the wheel around the retaining clips.

Valve symbol 3 on back of wheel cover

must point towards valve on wheel.

Alloy wheels 3: Fit the wheel bolt

caps 3 onto the wheel bolts.

Alloy wheels with anti-theft lock 3

Insert pin on back of hub cap into

corresponding hole in wheel. Insert and

tighten anti-theft lock 3 .

11. Stow away replaced wheel, tools and

warning triangle in the luggage

compartment.

12. Check the pressure of the new ly

mounted tyre. Correct if necessary.

13. Have the tightening torque of the wheel

bolts on the new wheel checked on the

vehicle using a torque wrench as soon

as possible and, if necessary, corrected.

Tightening torque – see page 152.

14. Replace the faulty tyre on the wheel

that was removed.

118 Self-help

Electrical system

Fuses

Fuse box

Depending on engine variant, the vehicle

has three fuse boxes: one in the passenger

compartment below the dashboard on the

driver’s side and two 3 on the left side of

the engine compartment.

To open the fuse box in the passenger

compartment, press the tab on the cover

and remove the cover. The assignment

numbers of the fuses are shown on the

inside of the cover.

Before replacing a fuse, turn off the

respective switch and the ignition.

It is a good idea to carry a complete set of

fuses, available from any Vauxhall

Authorised Repairer.

9 Warning

Electronic ignition systems generate very

high voltages. Do not touch the ignition

system; high voltage can be fatal.

119Self-help

Store spa re fuse s 3 in the place provided

on the inside of the cover.

To help in replacing fuses, there is a special

fuse-grippin g tool in the fuse box (shown in

yellow in illustration).

A defective fuse can be recognized by its

melted wire. A new fuse should only be

installed after the cause of the trouble has

been rectified.

Only fuses of the specified rating should be

installed. The rating is given on each fuse

and can also be identified by the fuse

colour.

Fuses Fuses

colour rating

Red

Blue

Yellow

White

Pink (Maxi-Fuse)

Yellow (Maxi-Fuse)

Black (Maxi-Fuse)

10 A

15 A

20 A

25 A

30 A

60 A

80 A

120 Self-help

Fuses and the most important

circuits they protect

Fuse box in passenger compartment

No. Circuit Rating

1 Fog tail lights 10 A

2 Brake light 15 A

3 Electronic immobiliser,

infotainment system,

courtesy light

15 A

No. Circuit Rating

4 Heated rear window 15 A

5 Central locking system 20 A

6 Hazard warning lights 10 A

7 Air conditioning system 10 A

8 Tail light 10 A

9 Courtesy light, 15 A

10 Central locking system,

instruments,

exterior mirrors

15 A

11 Electric windows 30 A

12 Airba g syste m 15 A

13 Immobilizer,

power steering (EPS),

instruments,

air conditioning system

15 A

No. Circuit Rating

14 Central locking system,

turn signal lights,

reverse lights,

headlight range adjustment

10 A

15 Instruments 10 A

16 Windscreen wipers,

windscreen washer system

15 A

17 ABS 10 A

18 Engine electronics 15 A

19 Cigarette lighter,

accessory socket

15 A

20 Central locking system,

exterior mirrors,

infotainment system,

instruments,

control indicators,

cigarette lighter,

accessory socket.

15 A

21 Heater fan,

heated rear window,

air conditioning system

25 A

121Self-help

Engine compartment fuse box below

windscreen

To open, press lug s a t side s and lift cove r.

No. Circuit Rating

1 ABS 60 A

2 Cooling fan 30 A

3 Power steering (EPS) 30 A

4 Starter 60 A

Lighting,

engine,

infotainment system

60 A

No. Circuit Rating

6 Alternator:

petrol engine 80 A

7 Dipped beam (right),

main beam (right)

15 A

8 Instruments,

control indicators,

dipped beam (left),

main beam (left)

15 A

No. Circuit Rating

9 Radiator fan,

fuel injection system:

petrol engine

20 A

30 A

10 Fog lights 15 A

11 Horn 15 A

12 ––

122 Self-help

Engine compar tment fuse box above

battery

To open, pull off the cover upwards.

Bulb replacement

Before replacing a bulb, switch ignition off

and switch relevant switch off.

Only hold new bulb at base! Do not touch

the bulb glass with bare hands, otherwise

fingerprints on the glass evaporate.

Residue b uilds up on the reflector

eventually resulting in a dull reflector.

Inadvertently stained bulbs may be

cleaned with a clean non-fluffy cloth, using

alcohol or white spirits.

The replacement bulb must be in

accordance with the data on the base of

the defective bulb. Do not exceed wattage

given on bulb base.

Headlight aiming

We recommend that headlight aiming be

carried out by your Vauxhall Authorised

Repairer, who will have special equipment.

When adjusting headlights, headlight

range adjustment must be set to 0.

Halogen headlight system

Dipped and main beam

1. Open bonnet and engage support.

2. Detach plug connector from bulb base.

3. Remove headlight protective cover.

No. Circuit Rating

1 ––

2 ––

3 Preheating system (1)80 A

4 -

––

123Self-help

4. Disengage spring wire clip from retaining

lugs by moving it sideways and swivel it

downwards.

5. Remove bulb from reflector housing.

6. When fitting a new bulb, engage the lugs

in the recesses on the reflector without

touching the glass.

7. Engage spring wire clip. Place headlight

protective cover in position and close

cover. Plug connector onto bulb base.

Parking lights

1. Open bonnet and engage support.

2. Rotate bulb holder to left and

disengage.

3. Disengage bulb holder from reflector

housing .

4. Remove bulb from holder.

5. Insert new bulb, without touching the

glass.

6. Insert bulb holder in reflector housing

and engage by turning clockwise.

124 Self-help

Front indicator lights

1. Open bonnet and engage support.

2. Rotate bulb holder to right and

disengage.

3. Disengage bulb holder from reflector

housing.

4. Push bulb into holder a little, rotate left

and remove.

5. Insert new bulb, without touching the

glass.

6. Insert bulb holder in reflector housing

and engage by turning anti-clockwise.

Tail lights

1. Remove both screws between bulb

housing and tailgate seal using

screwdriver from vehicle tool kit.

2. Pull bulb housing to rear so that it

disengages from the locking elements.

125Self-help

3. Rotate the bulb holder anti-clockwise

and pull out of the bulb housing.

Bulb sequence from top to bottom:

Tail light/brake light

Turn signal light

Fog tail light (right-hand side)

Reverse light (left-hand side).

4. Push bulb into bulb holder a little, rotate

le ft and re move.

5. Push new bulb into bulb holder a little,

rotate right and engage. Do not touch

the bulb glass.

6. Insert bulb holder in reflector housing

and engage by turning clockwise.

7. Insert bulb housing into mount with

fixing pin and secure with screws.

Additional brake light 3

We recommend that you have bulbs

changed by a Vauxhall Authorised

Repairer.

126 Self-help

Number plate light

1. Insert screwdriver vertically into number

plate light at right, rotate clockwise and

remove spring. Raise light insert on right

and lift out.

2. Depress protruding tongue and open

light housing.

3. Push bulb into bulb housing a little,

rotate left and remove.

4. Push new bulb into bulb housing a little,

rotate right and engage. Do not touch

the bulb glass.

5. Close number plate light, insert and

engage in position.

Courtesy light

Close doors or hold down contact switch

before removing lights so that they are not

live.

1. Push lens to rear and pull down to

remove, as shown in the illustration.

127Self-help

2. Press bulb slightly towards spring clip

and remove.

3. Insert new bulb, without touching the

glass.

4. Mount lens and engage in position.

Instrument illumination,

Information display illumination 3

We recommend that you have bulbs

changed by a Vauxhall Authorised

Repairer.

128 If you have a problem

If you have a problem

In our experience the most common cause

of all complaints is the result of

misunderstanding or lack of

communication between the customer and

the Vauxhall Authorised Repairer.

We sincerely hope you will never have

cause to complain about your vehicle.

However, if things do g o wrong, the best

course of action for you to take is to

contact your Vauxhall Authorised

Repairer’s Service Reception Staff and

explain the difficulty you are having. We

are confident they will do their utmost to

resolve the problem to your complete

satisfaction.

Sometimes, however, despite the best of

intentions of all concerned,

misunderstandings can occur. If your

problem has not been resolved to your

satisfaction, please make an appointment

to discuss the matter with the Manager of

the department concerned.

The majority of areas of concern can be

quickly resolved in this way.

Should you wish to pursue the matter

further, the Principal of the Vauxhall

Authorised Repairer should be made

aware of your concern. It is advisable in

cases such as this to write to him to confirm

your problem and the solutions that have

been offered.

You can be assured the Authorised

Repairer’s Principal will only be too anxious

to fully investigate your problems and

correct any errors made. After all, they

have a large investment in their business

and are proud of their reputation and

professionalism and fully realises that

satisfied customers are their k ey to success.

In the unlikely event that you are still not

happy with the answer your Vauxhall

Authorised Repairer has given, or the

action proposed to correct the problem,

you may contact the Customer Care

Department

where a team of Customer

Care Consultants will spare no effort to

ensure your complete satisfaction.

Vauxhall Motors Ltd.

Customer Ca re,

Griffin House,

Osborne Road,

LUTON,

Beds., LU1 3YT

Telephone: 01582 427200

They will review all the facts involved. Then

if it is felt some further action can be taken,

the Vauxhall Authorised Repairer will be

advised accordingly. In any case, your

contact will be acknowledged confirming

Vauxhall Motors’ position in the matter.

If you are not satisfied with the outcome,

you can if you wish, seek advice from an

independent third party such as:

Automobile Association (A.A.)

Fanum House,

BASINGSTOKE,

Hants., RG21 2EA

Royal Automobile Club (R.A.C.),

R.A.C. Motoring Services Ltd.,

89-91 Pall Mall,

LONDON, SW1Y S45

The Customer Relations Department,

Society of Motor Manufacturers and

Traders Ltd. (S.M.M.T.),

Forbes House, Halkin Street,

LONDON, SW1X 7DS

Customer Complaints Service,

Scottish Motor Trade Association,

(S.M.T.A.),

3 Palmerston Place,

EDINBURGH, EH12 5AQ

The National Conciliation Service,

Retail Motor Industry Federation,

9 North Street,

RUGBY, CV21 2AB

If you have a problem whilst abroad:The

Service Departments of Adam Opel AG

and General Motors branches everywhere

will provide information and assistance:

Calls ma y be mo nito red and recorded fo r

training purposes.

129If you have a problem

Opel Austria Vertriebs GmbH

Groß-Enzersdorfer Str. 59

1220 Vienna – Austria

Tel. 00 43 1-2 88 77 444 or

00 43-1-2 88 77 0

Opel Belgium N.V.

Prins Boudewijnlaan 30

2550 Kontich – Belgium

Tel. 00 32-34 50 63 11

Opel C & S spol. s. r.o.

Na Pankráci 26

140 00 Prague 4 – Czech Republic

Tel. 00 420-2-61 21-88 21

General Motors Danmark

Jaegersborg Alle 4

2920 Charlottenlund – Denmark

Tel. 00 45-39 97 85 00

Vauxhall Motors Ltd.

Customer Care

Griffin House, Osborne Road

Luton, Bedfordshire, LU1 3YT – England

Tel. 00 44-15 82-42 72 00

General Motors Finland Oy

Pajuniityntie 5

00320 Helsinki – Finland

Tel. Helsinki 00 358-61 58 81

General Motors France

1 – 9, avenue du Marais

Angle Quai de Bezons

95101 Argenteuil Cedex – France

Tel. 00 33-1-34 26 30 00

ADAM OPEL AG

Bahnhofsplatz 1

65423 Rüsselsheim – Germany

Tel. 00 49-61 42-77 50 00 or

00 49-61 42-7 70

General Motors Hellas S.A.

56 Kifisias Avenue & Delfon str.

Amarousion

151 25 Athens – Greece

Tel. 00 30-1-6 80 65 01

Opel Southeast Europe Ltd.

Szabadsag utca 117

2040 Budaörs – Hungary

Tel. 00 36-23 446 100

General Motors India

Sixth Floor, Tower A

Global Business Park

Mehrauli – Gurgaon Road

Gurgaon 122 022, Haryana – India

Tel. 00 91-124 280 3333

Opel Ireland Ltd.

Opel House, Unit 60, Heather Road

Sandyford, Dublin 18 – Ireland

Tel. 00 353-1-216 10 00

General Motors Italia Srl

Piazzale dell’Industria 40

00144 Rome – Italy

Tel. 00 39-6-5 46 51

Opel Nederland B.V.

Lage Mosten 49 – 63

4822 NK Breda – Netherlands

Tel. 00 31-76-5 44 88 00

General Motors Norge AS

Kjeller-Vest 6

2027 Kjeller – Norway

Tel. 00 47-23 50 01 04

General Motors Poland Sp. z o. o.

Domaniewska 41

06-672 Warsaw – Poland

Tel. 00 48-22-606 17 00

General Motors Portugal

Quinta da Fonte

Edificío Fernão Magalhães, Piso 2

2780-190 Paço d’Arcos – Portugal

Tel. 00 351-21 440 75 00

General Motors España S.L.

Paseo de la Castellana, 91

28046 Madrid – Spain

Tel. 00 34-902 25 00 25

Saab Opel Sverige AB

Esbogatan 8

164 74 Kista – Sweden

Tel. 00 46-8-632 85 00

General Motors Suisse S.A.

Stelzenstraße 4

8152 Glattbrugg – Switzerland

Tel. 00 41-44 828 28 80

Opel Türkiy e Ltd. Sti.

Kemalpasa yolu üzeri

35861 Torbali/Izmir – Turkey

Tel. 00 90-2 32-8 53-14 53

In Albania, Bosnia-Herzegovina,

Bulgaria, Croatia, Macedonia,

Romania, Slovenia and Yugoslavia

please contact the Opel

Service Department in Budaörs – Hungary

Tel. 00 36-23 446 100

130 Maintenance, Inspection System

Maintenance,

Inspection System

In orde r to guarantee econom ical and safe

vehicle operation and to maintain the

value of your vehicle, it is of vital

importance that all maintenance work is

carried out at the proper intervals as

specified by Vauxhall.

The date for the next service is determined

by time or kilometre/mileage intervals –

whic he ve r is reached first.

InSP app ears in the trip odom eter display

after the ignition is switched on when it is

time for servicing: Have service work

carried out within one week or 300 miles

(500 km). We recommend that you consult

your Vauxhall Authorised Repairer.

The service interval display takes account

of off-the-road periods during which the

battery is disconnected.

Further information on maintenance and

the inspection sy stem can be found in the

service booklet, which is in the glove

compartment.

Picture no: 15218H.tif

Have maintenance work – as well as

repairs to the bodywork and power units –

carried out by a professional. We

recommend your Vauxhall Authorised

Repairer, who is well acquainted with

Vauxhall vehicles and in possession of the

special tools required and the respective

latest service instructions from Vauxhall. In

order to avoid invalidation of any warranty

claim, it is especially important to entrust

work to a Vauxhall Authorised Repairer

during the warranty period. For further

information, see the Service Booklet.

A note on safety .................................. 131

Checking and topping up engine oil.. 131

Engine oil.............................................. 132

Coolant ................................................. 134

Brake fluid ............................................ 136

Wind screen wiper ................................ 137

Wind screen wash system .................... 137

Battery .................................................. 138

Protecting electronic components ..... 139

Vehicle decomm issioning.................... 139

Vehicle recommissioning..................... 139

131Maintenance, Inspection System

Separate anti-corrosion service

Follow the intervals specified in the Service

Booklet. We recommend that you entrust

this work to your Vauxhall Authorised

Repairer.

Picture no: 6526u.tif

A note on safety

Alw ays switch ignition off when performing

checks in the engine c ompartment

(e.g. checking the brake fluid level or the

engine oil level) due to risk of injury from

live cables and rotating parts.

Picture no: 16191h.tif

Never carry out any repairs or adjustment

and maintenance work on the vehicle

yourself. This especially applies to the

engine, chassis and safety parts. You may

unwittingly infringe the provisions of the

law and, by not performing the work

properly, endanger yourself and other

road users.

Checking and topping up engine

oil

To aid identification, the engine oil filler

cap and the handle of the oil dipstick are

coloured yellow.

9 Warning

The cooling fan is controlled by a

thermoswitch and ca n therefore start

unexpectedly even if the ignition is

switched off. Risk of injury.

Electronic ignition systems generate very

high voltages. Do not touch the ignition

system; high voltage can be fatal.

132 Maintenance, Inspection System

Picture no: 16192h.tif

Engine oil

Information on engine oils is available in

the Service Booklet.

Engine oil level, engine oil consumption

Every engine consumes engine oil for

technical reasons. The engine oil

consumption cannot be assessed until a

fairly long distance has been driven, and

may be a bove the specified value when the

vehicle is first being driven (run-in period).

Frequent driving at high revs increases

engine oil consumption.

In vehicles with engine oil level check 3, the

engine oil level is checked automatically. It

is particularly advisable to check the

engine oil level before emb arking on a long

journey.

Picture no: 16193h.tif

Engine oil level check,

topping up engine oil

The illustrations show checking and

topping up of various petrol and diesel

engines.

The oil level must be checked with the

vehicle on a level surface and with the

engine (which must be at operating

temperature) switched off. Wait at least

5 minutes before checking the level to

allow the normal engine oil accumulation

in the engine to drain into the oil pan.

Picture no: 15155h.tif

To check the engine oil level, insert wiped

oil dipstick into handle as far as it will go.

Top engine oil up if the level has dropped

into the range of the top-up mark MIN.

The engine oil level must not exceed the

upper mark MAX on the dipstick. Excess

engine oil must be drained off or extracted.

If the engine oil level is above the MAX

mark there is a risk of damage to the

engine or the catalytic converter.

The amount filled must be between the

MIN and MAX marks – see page155.

9 Warning

Do not allow the engine oil level to drop

below the minimum level!

9 Warning

It is the owner’s responsibility to maintain

the correct lev el of an appropriate quality

oil in the engine.

133Maintenance, Inspection System

Picture no: 12068h.tif

Top up with the same brand of engine oil

that was used during the previous oil

change, following the instructions in the

Service Booklet.

To close, position the cap and screw it into

place.

Capacities – see page 155.

Picture no: 12951h.tif

Engine oil change, engine oil filter change

Change the oil at the displayed service

intervals.

We recommend that you use genuine

Vauxhall engine oil filters.

Picture no: 15156h.tif

9 Warning

We recommend that you entrust engine

oil and filter changes to a Vauxhall

Authorised Repairer, who will be familiar

with the requirements of the law as

regards disposal of used oil and can thus

help to protect the environment a nd your

health.

134 Maintenance, Inspection System

Coolant

During operation the system is pressurized.

The temperature may therefore rise briefly

to over 100 °C.

The glycol-based coolant provides

excellent corrosion protection for the

heating and cooling systems as well as

anti-freeze protection down to -28 °C. It

remains in the cooling system throughout

the year and need not be changed.

Certain anti-freezes can lead to engine

damage. We therefore recommend the use

of anti-freezes that have been approved

by Vauxhall.

Picture no: 12952h.tif

Frost and corrosion protection

Before the start of the cold weather season,

have the coolant checked for correct

concentration using a calibrated

hydrometer. We recom mend that you

consult your Vauxhall Authorised Repairer.

The anti-freeze content must guarantee

frost protection down to approx. -28 °C. An

insufficient concentration will reduce frost

and corrosion protection. Add anti-freeze if

necessary.

If coolant loss is topped up with water,

have anti-freeze concentration checked

and add anti-freeze if necessary.

9 Warning

Antifreeze is a d ang er to health; it must

therefore be kept in the original container

and out of the reach of children.

135Maintenance, Inspection System

Picture no: 12519h.tif

Coolant level

Hardly any losses occur since the cooling

system is sealed and it is thus rarely

necessary to top up the coolant.

The c oolant in the expansion tank should

be just above the marking KALT/COLD or

between LO W and FU LL in diesel engines

with the cooling system cold. It rises when

the engine has warmed up and drops

again as the engine cools. If it falls below

the marking KALT/COLD or below LOW

during this, top up to just above the

marking KALT/COLD or between LOW

and FULL.

Picture no: 16194h.tif

Top up anti-freeze. If no anti-freeze is

available, top up with clean tap water. If

tap water is unavailable, distilled water

can be used.

After topping up with tap or distilled wa ter,

have the anti-freeze concentration

checked, and anti-freeze added if

necessary. Have the cause of the coolant

loss remedied. We recommend that you

consult your Vauxhall Authorised Repairer.

To close, position the cap and screw it into

place.

Coolant temperature

If the temp erature g auge is in the upp er

warning zone, coolant temperature is too

high. Check the coolant level immediately.

z Coolant level too low:

Top up coolant. Pay attention to the

instructions given under "Anti-freeze and

corrosion protection" and "Coolant

level". Have the cause of coolant loss

remedied. We recommend that you

consult your Vauxhall Authorised

Repairer.

z Coolant level OK:

Have the cause of increased coolant

temperature remedied. Contact a

workshop. We recommend that you

consult your Vauxhall Authorised

Repairer.

9 Warning

Allow engine to cool down before

removing coolant filler cap. Remove filler

cap carefully so that pressure can escape

slowly, otherwise there is a risk of

scalding.

136 Maintenance, Inspection System

Picture no: 11252H.tif

Brake fluid

Brake fluid level

The fluid level in the reservoir must be

neither higher than the MAX mark nor

lower than the MIN mark.

Use of certain brake fluids could lead to

damage or reduced braking effect. Stay

well informed! We recommend the use of

Vauxhall-approved high performance

brake fluid when necessary.

Extreme cleanliness is im porta nt as b rake

fluid contamination could cause brake

system malfunction.

After correcting the brake fluid level, have

the cause of brake fluid loss remedied. We

recommend that you consult your Vauxhall

Authorised Repairer.

Brake fluid change

Brake fluid is hygroscopic, i. e. it absorbs

water. If the brakes become hot, such as

when driving on long downhill stretches,

vapour bubbles can form in the water,

which can have an adverse effect on

braking power (depending on the

proportion of water).

The fluid change intervals specified in the

Service Booklet must therefore be

observed.

9 Warning

Brake fluid is poisonous and corrosive. Do

not allow it to contact eyes, skin, fabrics

or painted surfaces. Direct contact may

cause injuries and damage.

9 Warning

We recommend that you have brake fluid

changed by a Vauxhall Authorised

Repairer, who will be familiar with the

requirements of the law a s regards

disposal of brake fluid and can thus help

to protect the environment and your

health.

137Maintenance, Inspection System

Windscreen wiper

Clear vision is essential for safe driving.

The cleaning effect of the windscreen w iper

should therefore be checked at regular

intervals. We recommend replacing the

wiper blades at least once a year.

If the windows are dirty, operate the

windscreen wash before switching the

wiper on in order to prevent wiper blade

wear.

Do not switch windscreen wiper on if

windows are icy, since this may damage

the wiper edges or the wiper system.

If the wiper becomes frozen onto the glass,

we recommend that it be released with the

aid of Vauxhall De-icer Spray.

Sm earing w ip er b lades ca n be clea ne d w ith

a soft cloth and Vauxhall Windscreen

Wash Solvent.

Wiper blades whose lips have become

hardened, cracked or covered with silicone

must be replaced. This may be necessary

as a result of the effects of ice, thawing salt

or heat, or the incorrect use of cleaning

agents.

Switch off windscreen wiper in the car

wash, see pages 9, 141.

Windscreen wiper blade maintenance - see

page 142.

Picture no: 11253H.tif

Wiper blade replacement

Lift wiper arm. Move release lever and

detach wiper blade.

Picture no: 13487h.tif

Windscreen wash system

The fluid container for the windscreen

washer system and the rear window

washer system is located on the right-hand

side of the engine compartment (viewed

from the front of the vehicle).

138 Maintenance, Inspection System

Fill only with clean water to prevent the

nozzles from clogging. To improve

cleaning efficiency, we recommend that

you add a little Vauxhall Windscreen Wash

Solvent.

The windscreen washer system will not

freeze in winter:

When closing the container, press the lid

firmly over the beaded edge all the way

round.

Picture no: 13488a.tif

Battery

The battery is maintenance-free.

Retrofitted electrical or electronic

accessories can place an additional load

on the battery or even discharge the

battery. We recommend that you consult a

Vauxhall Authorised Repairer regarding

technical possibilities, such as fitting a

more powerful battery.

Parking the vehicle for more than 4 weeks

can discharge the battery. This ca n shorten

the life of the battery. Therefore d isconnect

the battery by disconnecting the negative

terminal from the on-board power supply.

Ensure that ignition is switched off before

connecting battery. Failure to do so could

result in the engine not being able to start

or engine operating problems. Time and

date must be set in the information display

after the battery is reconnected.

Freeze

protection

downto

Mixture strength –

Vauxhall Windscreen

Wash Solvent: Water

– 5 °C

– 10 °C

– 20 °C

– 30 °C

1 : 3

1 : 2

1 : 1

2 : 1

9 Warning

We recommend that you have battery

changes carried out by a Vauxhall

Authorised Repairer. The Vauxhall

Authorised Repairer knows the laws

concerning the disposal of used batteries

and therefore protects the environment

and y our health.

139Maintenance, Inspection System

Protecting electronic components

In order to prevent faults in electronic

components in the electrical system, never

connect or disconnect battery with engine

running or ignition switched on. Never start

engine with battery disconnected, e.g.

when starting using jump leads.

To avoid damaging the vehicle, do not

make any modifications to the electrical

system, e. g. connecting additional

consumers or tampering with electronic

control units (chip tuning).

Disconnect/connect vehicle battery from/

to electrical system.

Disconnect the battery from the vehicle

electrical system before charging: First

detach the negative and then the positive

lead. Do not reverse the polarity of the

battery, i.e. do not confuse the terminals

for the positive and negative leads. When

connecting, start with the positive lead and

then connect the negative lead.

Vehicle decommissioning

Observe national regulations.

If the vehicle is decommissioned for severa l

months, the following work must be carried

out in order to prevent damage. We

recommend that you consult your Vauxhall

Authorised Repairer.

z Wash and preserve the vehicle – see

page 141.

z Check protective coating in engine

compartment and on underbody and

rectify where necessary.

z Clean and preserve rubber seals on

bonnet and doors.

z Change engine oil – see page 133.

z Check anti-freeze and corrosion

protection – see page 134.

z Check the coolant level, top up with anti-

freeze if necessary – see page 135.

z Drain the windscreen washer system.

z Increase tyre pressure to value specified

for full load – see page 152.

Vehicle storage

z Park vehicle in dry and well-ventilated

premises. Engage first gear or reverse.

Place wheel chocks or suchlike under

wheels to prevent vehicle from rolling

away.

z Do not apply hand brake.

z Disconnect battery by disengaging

negative terminal from vehicle electrical

system – see p age 138.

Vehicle recommissioning

Observe national regulations.

Carry out the following w ork before putting

a vehicle back on the road.

z Connect battery – see page 138.

z Check tyre pressure and correct if

necessary – see page 152.

z Fill up windscreen washer system – see

page 137.

z Check engine oil level – see page 132.

z Check the coolant level; top up with anti-

freeze if necessary, see page 135.

z Fit the number plate if necessary.

9 Warning

Electronic ignition systems generate very

high voltages. Do not touch the ignition

system; high voltage can be fatal.

140 Vehicle care

Vehicle care

Obtain advice from a Vauxhall Authorised

Repairer regarding cleaning materials that

have been tested and recommended by

Vauxhall.

When caring for your vehicle, observe all

na tional e nvironm ental reg ulations,

particularly when washing it.

Regular, thorough care helps to improve

the appearance of your vehicle and

maintain its value over the years. It is also

prerequisite for warranty claims for any

paint or corrosion damage. The following

pages contain tips for vehicle care which, if

used properly, will help combat the

unavoidable damaging effects of the

environment.

Vehicle care aids 3

Vehicle wash:

z Wa sh brush,

z Shampoo,

z Sponge,

z Insect Removal Sponge,

z Chamois.

Vehicle care:

z Paintwork Cleaner,

z Paintwork Polish,

z Metallic Paintwork Wax,

z Hard wax,

z Vauxhall Touch-Up Paint,

z Vauxhall Touch-Up/Aerosol Paint,

z Wheel Preserver,

z Insect Remover,

z Window Cleaner,

z Vauxhall Cleaning Solvent and Anti-

Freeze,

z Silicone Oil for Rubber Seals,

z Cleaner.

Washing ............................................... 141

Waxing ................................................. 141

Polishing ............................................... 141

Wheels .................................................. 141

Paintwork damage.............................. 141

Exterior lights ....................................... 142

Plastic and rubber parts ..................... 142

Wheels and tyres ................................. 142

Interior and upholstery........................ 142

Seat belts.............................................. 142

Wind ow s............................................... 142

Wind screen wiper blades.................... 142

Locks..................................................... 143

Engine compartment........................... 143

Underb ody........................................... 143

141Vehicle care

Washing

The paintwork of your vehicle is exposed to

environmental influences, e.g. continuous

changes in weather conditions, industrial

waste gases and dust or thawing salts, so

wash and wax your vehicle regularly. When

using automatic car washes, select a

programme which includes waxing.

Bird droppings, dead insects, resin, pollen

and the like should be cleaned off

immediately, as they contain aggressive

constituents which can cause paint

damage.

If using a car wash, comply with the

pertinent instructions of the car wash

manufacturer. The windscreen wipers and

rear window wiper must be in their park

position – see pa ge 12. Remove antenna 3

and roof rack 3. Stand on the door sill to

reach them more easily.

If you wash your vehicle by hand, make

sure that the insides of the wings are also

thoroughly rinsed out.

Clea n edges and folds on op ened doors

and flaps as well as the areas they cover.

Thoroughly rinse off and leather-off the

vehicle. Rinse leather frequently. Use

separate leathers for paint and window

surfaces: remnants of wax on the windows

will impair vision.

Observe national regulations.

Waxing

Wax your vehicle regularly, in particular

after it has been washed using shampoo

and at the latest when wa ter no longer

forms beads on the paintwork, otherwise

the paintwork will dry out.

Also wax edg es and folds on opened doors

and flaps as well as the areas they cover.

Polishing

Polishing is necessary only if the paint has

become dull or if solid deposits have

become attached to it.

Pa intwork polis h with silic on e form s a

protective film, making waxing

unnecessary.

Plastic body parts should not be treated

with wax and polish.

Use Metallic Paintwork Wax on vehicles

with a metallic-effect paint finish.

Wheels

Use a pH-neutral wheel cleaning agent to

clean the wheels.

Wheels are painted and can be treated

with the same ag ents as the body. For alloy

wheels we recommend use of Alloy Wheel

Preserv er.

Paintwork damage

Repair small areas of paint damage such

as stone impacts, scratches etc.

immediately using an Vauxhall touch-up

applicator or Vauxhall spray and touch-up

paint before rust can form. If rust has

already formed, have the cause remedied.

We recommend that you consult your

Vauxhall Authorised Repairer. Please also

pay attention to surfaces and edges

beneath the vehicle where which rust may

have formed unnoticed for some time.

142 Vehicle care

Exterior lights

Headlight and other protective light bezels

are made of plastic. If they require

additional cleaning after the vehicle has

been washed, clea n them with Car

Shampoo. Do not use any abrasive or

caustic agents, do not use an ice scraper,

and do not clean them dry.

Plastic and rubber parts

For additional cleaning of plastic and

rubber parts use Interior Cleaner. Do not

use any other agent, and in particular do

not use solvents or petrol.

Do not use high-pressure jet cleaners.

Wheels and tyres

Do not use high-pressure jet clea ners.

Interior and upholstery

Clean the vehicle interior, including the

instrument panel fascia, using interior

cleaner.

The instrument panel should only be

cleaned using a soft damp cloth.

Clean fabric upholstery with a vacuum

cleaner and brush. To remove stains, use

cleaner that is suitable for both fabrics and

vinyl.

Do not use cleaners such as acetone,

carbon tetrachloride, paint thinner, paint

remover, nail varnish remover, washing

powder or bleach. Petrol is also unsuitable.

Open velcro fastenings in your clothing

could damage the seat cushions. Close

velcro fastenings.

Seat belts

Always keep seat belts clean and dry.

Clean only with lukewarm water or Cleaner.

Windows

When cleaning the heated rear window,

make sure that the heating element on the

inside of the window is not damaged.

Use a soft lint-free cloth or chamois leather

in conjunction with Window Cleaner and

Insect Remover.

Vauxhall Cleaning Solvent and Antifreeze

is suitable for de-icing windows.

For mechanical removal of ice, use a

commercially available sharp-edged ice

scraper. Press the scraper firmly against

the glass so that no dirt can get under it

and scratch the glass.

Windscreen wiper blades

Wax such as the wax used in car washes

can c ause smearing on the windscreen

when the windscreen wipers are switched

on.

Smearing wiper blades can be cleaned with

a soft cloth and Vauxhall Cleaning Solvent

and Antifreeze. Replace them if necessary

– see page 137.

143Vehicle care

Locks

The locks are lubricated with a high-grade

lock cylinder grease at the factory.

Vauxhall lock cylinder grease prevents the

locks from freezing up. Only use de-icing

agent in emergencies, as they have a

degreasing effect and will impair the

function of the locks. After using a de-icing

agent, have the locks re-greased. We

recommend that you entrust this to your

Vauxhall Authorised Repairer.

Engine compartment

Areas of the engine compartment that are

painted in the same colour as the vehicle

must be looked after like any other painted

surface.

It is advisable to wash the engine

compartment before and after winter and

preserve it with wax. Cover alternator and

brake fluid reservoir with plastic sheets

before washing the engine.

When washing the engine with a steam-jet

cleaner, do not dire ct the ste am je t at

components of the Anti-lock Brake

System 3, the automatic air conditioning

system 3 or the belt drive and its

components.

Protective wax that has been applied is

also removed during the engine wash. For

this reason, have the engine, brake system

components in the engine compartment,

axle components with steering, body parts

and cavities thoroughly preserved with

protective wax after the wash. We

recommend that you consult your Vauxhall

Authorised Repairer.

An engine wash can be performed in the

spring in order to remove dirt that has

adhered to the engine compartment,

which may also have a high salt content.

Check protectiv e w ax la yer and ma ke good

if necessary.

Do not use high-pressure jet clea ners.

Underbody

Your vehicle has a factory-applied PVC

undercoating in the wheel arches

(including the longitudinal mem bers) which

provides permanent protection and needs

no special maintenance. The surfaces of

the vehicle underbody not covered by PVC

are provided with a durable p rotective wax

coating in critical areas.

On vehicles w hich are washed frequently in

automatic car washes with underbody

washing facility, the protective wax

coating may be impaired by dirt-dissolving

add itives, so check the underbod y after

washing and have it waxed if necessary.

Before the start of the cold weather season,

check the PVC coating and protective wax

coating and, if necessary, have them

restored to perfect condition.

Caution - commercially available bitumen/

rubber materials can damage the PVC

coating. We recommend that you have

underbody work carried out by an

Vauxhall Authorised Repairer, who knows

the prescribed materials and has

experience in the use thereof.

The underbody should be washed

following the end of the cold weather

season to remove any dirt adhering to the

underbody since this may also contain salt.

Check protective wax coating and, if

necessary, have it restored to perfect

condition.

144 Technical Data

Technical Data

Picture no: 13489h.tif

Vehicle documents, identification

plate

The technical data is determined in

accordance with European Community

standards. We reserve the right to make

modifications. Specifications in the vehicle

docum ents always have priority over those

given in this manual.

The identification plate is affixed to the

front right door frame.

Picture no: 13329j.tif

Information on identification plate:

1 Manufacturer

2 Type approval number

3 Vehicle identification number

4 Permissible gross vehicle weight

5 Permissible gross train weight

6 Maximum permissible front axle load

7 Maximum permissible rear axle load

8 Vehic le-specific or

country-specific data

Vehicle identification data.................. 145

Coolant, b rake fluid, oils ..................... 145

Engine data.......................................... 146

Performance......................................... 147

Fuel consumption, CO

emission........

148

Weights, payload and roof load........ 150

Tyres ..................................................... 152

Electrical system .................................. 154

Capacities ............................................ 155

Dimensions........................................... 156

Mounting dimensions of caravan/

trailer towing equipment .................. 157

145Technical Data

Picture no: 14072h.tif

Vehicle identification data

The vehicle identification numb er is

stamped on the identification plate and in

the engine compartment.

In other design variants, the identification

plate may also be affixed to the

dashboard.

Engine code and engine number: stamped

on left-hand side of engine on crankcase.

Coolant, brake fluid, oils

When topping up

– coolant,

–brake fluid,

– transmission fluid

we recommend that you consult your

Vauxhall Authorised Repairer, who can

advise you on the correct products to use.

Caution: Use of unsuitable fluids can cause

serious damage to the vehicle.

Engine oils

Information on engine oils is available in

the Service Booklet.

146 Technical Data

Engine data

Sales designation

Engine code

1.0 TWINPORT

Z 10 XEP

1.2 TWINPORT

Z 12 XEP

Number of cylinders 3 4

Piston displacement (cm

) 998 1229

Max. engine output (kW)

at rpm

5600

Torque (Nm)

at rpm

3800

110

4000

Fuel type

Petrol Petrol

Octane requirement (RON)

unleaded

or unle aded

Standard high-quality fuels, e.g. unleaded DIN EN 228, Diesel DIN EN 590;N = Normal (Regular), S = Super (Premium), SP = Super Plus (Premium Plus),

va lu e pr in ted in bold: recomm ended fu el.

95 (S)

98 (SP)

91 (N)

2)3)

–

Knock control system automatically adjusts ignition timing according to type of fuel used (octane number).

Slight reduction in engine power and torque if 91 RON is used.

95 (S)

98 (SP)

91 (N)

2)3)

–

Max. permissible engine speed,

continuous (rpm) approx.

6250 6200

Oil consumption (l/1000 km) 0.6 0.6

147Technical Data

Performance

(approx. km/h)

Sales designation – see pa ge 14 6.

The maximum speed is achievable with a maximum of half payload. Optional equipment may reduce the specified maximum speed of the vehicle.

Engine

Z 10 XEP Z 12 XEP

Maximum speed (mph)

90 100

148 Technical Data

Fuel consumption,

emission

Directive 80/1268/EEC (last changed by

1999/100/EC) has applied for the

measurement of fuel consumption since

1996.

The directive is oriented to actual driving

practices: urban driving is rated at approx.

and off-road driving with approx.

(urban and extra-urban consumption).

Cold starts and acceleration phases are

also taken into consideration.

The specification of CO

emission is also a

constituent of the directive.

The figures given must not be taken as a

guarantee for the actual fuel consumption

of a particular vehicle.

All values are based on the EU base model

with standard equipment.

The calculation of fuel consumption as

specified by directive 1999/100/EC takes

account of the vehicle’s kerb weight,

ascertained in accordance with the said

regulation. Optional extras may result in

slightly higher fuel consumption and CO

emission levels than those quoted.

Saving fuel, p rotecting the environm ent -

see page 84.

149Technical Data

Fuel consumption (l/100 km approx.), CO

emission (g/km approx.)

Sales designation – see pa ge 14 6.

Engine

Z 10 XEP Z 12 XEP

Urban

Extra-urb an

Com bined

7,0

5,1

5,8

139

7,6

5,1

6,0

144

150 Technical Data

Weights, payload and roof load

Payload is the difference between the

permissible gross vehicle weight (see

identification plate) and the EC kerb

weight.

To calculate the kerb weight, enter the

data for your vehicle below:

z Kerb weight from

Ta ble 1,

page 151 + .............. kg

z Weight of heavy

accessories from Table 2,

page 151 + .............. kg

The total = .............. kg

is the EC kerb weight.

Optional equipment and accessories

increase the kerb weight, which means that

the payload will also change slightly.

Note the weights given in the vehicle

documents and the identification plate.

The combined total of front and rear axle

loa ds must not exceed the perm issible

gross vehicle weight. For example, if the

front axle is bearing its maximum

permissible load, the rear axle can only

bear a load that is equal to the gross

vehicle weight minus the front axle load.

When a trailer/caravan has been coupled

and the towing vehicle is fully laden

(including occupants), the permissible rear

axle load (see identification plate for

specification) may be exceeded by 15 kg

and the permissible gross vehicle weight

may be exceeded by 27 kg. If the

permissible rear axle load is exceeded, a

maximum speed of 50 mph applies. If

national regulations specify a lower

maximum speed when towing, this must be

ob se rved.

See the identification plate or vehicle

documents for permissible axle loads.

Roof load

The permissible roof load is 35 kg. The roof

load consists of the weight of the roof rack

plus the load carried.

The height of the loa d – measured from the

roof rail – must not exceed 50 cm.

Driving hints – see page 82.

151Technical Data

Weights (kg): Table 1,

Kerb weight

Accor ding to EC Di rect iv e 70/1 56/EC, in cl ud in g as sumed wei gh ts f or dr iv er (68 k g) , lu gg ag e (7

kg) and all fluids (tank 90% full).

Sales designation – see pa ge 14 6.

Model Engine

Agila Expression

Z 10 XEP 1040

Z 12 XEP 1055

Agila

with air con.

Z 10 XEP 1052

Z 12 XEP 1067

Agila Design

Z 10 XEP 1105

Z 12 XEP 1120

Agila Design

with air con.

Z 10 XEP 1117

Z 12 XEP 1132

Weights (kg): Table 2,

Heavy accessories

Agila

Sun roof 15

Roof rail 12

Electronic power steering (EPS) 5

152 Technical Data

Tyres

Restrictions

Not all tyres available on the market

currently meet the structural requirem ents.

We recommend that you consult a

Vauxhall Authorised Repairer concerning

suitable tyre makes.

These tyres have und ergone special tests

to establish their reliability, safety and

specific suitability for Vauxhall vehicles.

Despite continuous ma rk et monitoring, we

are unable to assess these attributes for

other tyres, even if they have been gra nted

approval by the relevant authorities or in

some other form.

Further information – see page 96.

Winter tyres 3

If you use winter tyres, the spare wheel may

still be fitted with a summer tyre. If you use

the spare wheel the vehicle’s handling may

be altered. Obtain a replacement for the

faulty tyre as soon as possible, and have

the wheel balanced and fitted to the

vehicle.

Further information – see page 100.

Tyre chains 3

Tyre chains may be used on the front

wheels only.

Only Vauxhall tyre chains,

catalogueno.47 05 448, may be used.

They should be fitted to the front wheels

only.

Further information – see page 100.

Wheels

Wheel bolt tightening torque: 110 Nm.

On vehicles with alloy wheels 3 the spare

wheel may have a steel rim.

The spare wheel may have a smaller tyre

and a smaller rim

: using the spare wheel

may cause different driving behaviour.

Replace defective tyre as soon as possible,

balance wheel and have it fitted to the

vehicle.

Tyre pressure in bar/psi

The specified tyre pressures are valid for

cold tyres. Increased tyre pressure resulting

from extensive driving must not be

reduced. The specified pressures apply to

both summer and winter tyres.

Always inflate the spare wheel to the tyre

pressure for full load - see table on

following page.

Further information – see pages 96 to 100.

Country-specific version: The spare wheel is

only to be used as a temporary spare wheel.

1 bar corresponds to 100 kPa/14.5 psi.

153Technical Data

(ctd.)

Tyre pressure in bar/psi

1 bar corresponds to 100 kPa/14.5 psi.

Tyre pressure

for load of

up to 3 pers ons

Tyre pressure

for full load

Engine

Tyres Front Rear Front Rear

Z 10 XEP,

Z 12 XEP

155/65 R 14,

165/60 R 14

2.3/33 2.3/33 2.4/35 3.0/44

Sales designation – see page 146.

154 Technical Data

Electrical system

Battery Voltage 12 Volt

Amp hours 36 Ah, 44 Ah, 55 Ah 3, 60 Ah 3

Battery for radio remote control of

central locking system CR 16 16

155Technical Data

Capacities

(approx. litre)

Engine

Sales designation – see page 146.

Z 10 XEP Z 12 XEP

Fuel tank (nom inal conte nt) 41 41

Engine oil with filter change

between MIN and MAX

on dipstick

3.0

1.0

3.5

1.0

Windscreen washer reservoir 2.2 2.2

156 Technical Data

Dimensions

(mm)

Agila

Overall length 3540

Overall width 1625

Width with two exterior mirrors 1940

Overall height 1660

Height with roof rail 1695

Luggage compartment length at floor 580

/1065

To rear seat backrest.

With folded rear seat backrest.

Luggage compartment width

maximum

between wheel housing

1364

1115

Height of luggage compartment opening 935

Wheelbase 2360

Turning circle diameter, wall to wall

In metre s.

10.60

157Technical Data

Mounting dimensions of

cara va n/trailer towing

equipment

All dimensions relate to trailer towing

equipment approved by Vauxhall.

Dimension mm

380

B 245

C 100

D 100

E 10

F 538

G 50

9 Warning

Only use towing equipment approved for

your vehicle. We recommend entrusting

retrofitting of towing equipment to your

Vauxhall Authorised Repairer.

158

Index

ABS (Anti-lock Brake System) .................94

Accessories .................................62, 65, 110

Accessory socket .....................................49

Air conditioning system ...........................78

Air intake ..................................................80

Air outlet ...................................................80

Air recirculation system ...........................74

Air vents ...................................................73

Airbags .....................................................57

Alternator .................................................20

Antenna ....................................................26

Anti-corrosion service ............................ 131

Anti-freeze ......................................134, 138

Anti-freeze protection ...................134, 138

Anti-knock quality of fuel ........................86

Anti-theft loc king system ........................33

Anti-theft protection ...............................16

Aquaplaning ............................................99

Ashtray .....................................................49

Battery ......................................83, 138, 154

Before sta rting off ...................................14

Belt tensioners ..........................................51

Bonnet ......................................................37

Boot, see Luggage compartment ..........41

Brake light .............................................. 124

Brake system ............................................92

Brakes ....................................................... 92

ABS ....................................................... 94

Brake fluid .......................................... 136

Brake lights ........................................ 125

Brake servo unit ................................... 82

Foot brake ............................................ 92

Hand brake .......................................... 93

Bulb replacement .................................. 122

Bulbs, ................................................65, 122

Capacities .............................................. 155

Car Pass ..................................................... 2

Care ........................................................ 140

Catalytic converter ....................88, 91, 106

Central locking system ......................31, 33

Changing the

remote control battery .................. 32, 154

Changing tyre/wheel typ e ...................... 96

Changing wheels ................................... 114

Chassis num ber,

see vehicle identification num ber ...... 145

Child restraint systems ............................ 62

Child safety locks ..................................... 37

Child safety seats .................................... 62

Cigarette lighter ...................................... 49

Climate control ........................................ 72

Clock ......................................................... 24

Clutch operation ...................................... 83

CO2 emissions ....................................... 148

Code numbers ........................................... 2

Coding, octane numbers ...................... 146

Cold start ................................................. 84

Control indicator

ABS (Anti-lock Brake System) ............. 95

Airbag .................................................. 60

Engine electronics ................................ 90

Exhaust ................................................. 89

Immobiliser ........................................... 29

Control indicators ................................ 8, 18

Belt tensioners ..................................... 52

EPS (Electric Power Steering) .............. 18

Coolant ..........................................134, 135

Coolant level .......................................... 135

Coolant tempera ture display ................. 23

Coolant thermometer ............................. 23

Cooling ..................................................... 78

Correcting time ........................................ 24

Coupling socket load ............................ 104

Courtesy light ........................................... 68

Courtesy lights

Bulb replacement .............................. 126

Dashboard, see Instrum ent panel ............6

Data ...........................................28, 31, 144

Date display ............................................ 24

Daytime running lights ........................... 66

Decommissioning .................................. 139

Demisting and Defrosting

With the air conditioning system ....... 79

Demisting and defrosting

Windows ............................................... 77

Dimensions ............................................. 156

Dipped beam ........................................... 66

Bulb replacement .............................. 122

Display ..................................................... 24

159

Door locks ...............................2, 33, 37, 143

Driving abroad .................. 68, 86, 128, 129

Driving hints .............................................82

Economical driving ............................ 83, 84

Electric power steering ...................... 18, 82

Electrical system ................... 118, 139, 154

Electronic components .......................... 139

Electronic immobiliser ..............................29

Engine code ........................................... 146

Engine control indicator ..........................90

Engine oil ................................................ 132

Engine oil change .................................. 133

Engine oil consumption .................132, 146

Engine oil filter ....................................... 133

Engine oil level .................................18, 132

Engine oil pressure ...................................21

Engine speed ...................................... 82, 83

Engine wash ........................................... 143

Environmenta l protection .............133, 140

EPS ............................................................18

Exhaust control indicator ........................89

Exhaust ga ses ..........................................90

Exhaust system ........................................90

Exterior mirrors .....................................5, 65

Fan ............................................72, 131, 132

Filling station

Bulb replacement .............................. 122

Capacities .......................................... 155

Engine oil level ................................... 132

Fuel ............................................... 86, 146

Ignition key ............................................. 2

Opening the bonnet ............................ 37

Tyre pressure ...................................... 152

Vehicle data ....................................... 144

Windscreen wash system (filling) ..... 137

First-aid kit (cushion) ....................... 65, 110

Flat tyre .................................................. 114

Fluid container

Windscreen wash system .................. 137

Fog lights ................................................. 67

Fog tail light

Bulb replacement .............................. 124

Fog tail lights ...........................................67

Foot brake ................................................ 92

Front passenger a irba g .......................... 57

Fuel ................................................... 86, 146

Fuel consumption ................83, 84, 86, 148

Fuel filter ................................................ 134

Fuel level .................................................. 23

Fuses .............................. 118, 120, 121, 122

Gears ........................................................ 14

Generator, see Alternator ....................... 20

Genuine Vauxhall

Parts and Accessories ..................... 17, 65

Glove compartment ................................ 47

Gross vehicle weight ............................. 150

Halogen headlight system ................... 122

Hand brake .................................. 15, 16, 93

Haz ard warning lights ............................ 11

Head restraints ........................................ 39

Headlight flash ........................................ 10

Headlight range adjustment ............ 66, 67

Headlight switch ............................... 10, 66

Headlights ............................................... 10

Daytime running lights ........................ 66

Driving abroad .................................... 68

Fog lights ............................................. 67

Reversing lights .................................... 67

Warning device .................................... 15

Headlights

Changing bulbs ................................. 122

Heated rear w indow ......................... 13, 74

Heating ........................................ 72, 76, 77

with the air conditioning system ........ 79

Heating the foot well .............................. 77

Height adjustment

Seat belts ............................................. 54

High-pressure cleaners ......................... 143

Horn .......................................................... 11

160

Identification plate ................................ 144

Ignition system ...................... 131, 138, 139

Immobiliser ...............................................29

Information display .................................24

Infotainment system ................................24

Inspection system .................................. 130

Instrument illumination

Bulb replacement ............................... 127

Instrument panel ....................................... 6

Instruments ..............................................18

Interior mirror .......................................4, 65

ISOFIX .......................................................62

Jac k ........................................ 113, 114, 116

Jump leads ............................................. 106

Key

Ignition lock ......................................5, 29

Locking d oors .....................28, 29, 31, 33

Remove .................................................16

Starting the engine ..........................5, 15

Key numbers .............................................. 2

Keys ............................................................ 2

Lashing eyes ............................................ 42

Leather trim ........................................... 142

Light switch ........................................10, 66

Lighting ......................................10, 66, 122

Driving abroad ..................................... 68

Loading ....................................85, 103, 150

Loading the vehicle ............................... 150

Locking d oors ..............................28, 30, 31

Locking from the inside .......................... 30

Locks ....................................................... 143

Luggage compartment

Cover .................................................... 43

Extension .............................................. 41

Lashing eyes ........................................ 42

Loading .............................................. 103

Locking ...........................................30, 36

Luggage compartment cover ................ 43

Main b eam ......................................... 10, 66

Bulb replacement .............................. 122

Control indica tor .................................. 18

Maintenance .......................................... 130

Air cond itioning system ...................... 81

Anti-freeze protection ...............134, 138

Brake fluid .......................................... 136

Brakes ................................................... 92

Catalytic converter .............................. 91

Engine oil ............................................ 132

Fuel consumption ................................ 85

Tyre pressure ....................................... 97

Tyres ..................................................... 98

Windscreen wipers ............................ 137

Manual transmission ............................... 14

Mirrors .................................................. 4, 65

Misted wind ow s ....................................... 77

Mobile telephone .................................... 26

Number plate light ............................ 31, 37

Number plate lights

Bulb replacement .............................. 126

Number plate lighting ..............31, 37, 126

161

Octane numbers ..............................86, 146

Odometer .................................................22

Oil change .............................................. 133

Oil consumption .............................132, 146

Oil filter change ..................................... 133

Oil level ................................................... 132

Oil pressure ..............................................21

Oils ..........................................................145

Operating temperature ...........................83

Outside temperature gauge ...................25

Overrun ............................................... 83, 85

Paintwork damage ................................ 141

Parking .....................................................16

Parking lights ..................................... 10, 66

Bulb replacement ............................... 123

Parking the vehicle ..................................16

Parts ..........................................................17

Pedals .......................................................83

Performance ........................................... 147

Petrol ................................................86, 146

Pinking ......................................................86

Pollen filter ...............................................80

Power assisted steering, see Electric power

steering .............................................18, 82

Protection against

unauthoriz ed use ...................2, 5, 29, 37

Pushing, towing ..................................... 106

Radio ........................................................26

Radio equipm ent (CB) ............................. 26

Radio remote control .............................. 31

Rear light cluster ................................10, 66

Bulb replacement .............................. 124

Rear w indow wash system .............. 12, 137

Rear w indow wiper ..................................12

Refuelling ................................................. 87

Fuel filler cap ........................................ 87

Replacement keys ................................... 28

Reversing lights ........................................ 67

Bulb replacement .............................. 124

Roof load ....................................82, 85, 150

Roof rac k ................................................ 102

Roof rac ks ..................................82, 85, 102

Rucksack .................................................. 46

Running-in ................................................ 82

Brakes ................................................... 92

Safety ....................................................... 50

Safety accessories .....................62, 65, 110

Safety net ................................................. 43

Saving energy ....................................83, 84

Seat belts ............................................. 5, 51

Seat height adjustment ............................ 4

Seats ..................................................... 5, 39

Self-diagnostics .................................60, 95

Self-help ................................................. 106

Radio remote control .......................... 32

Serv ice interval display ......................... 130

Serv ice work ............................................. 16

Side airbags ............................................. 59

Signal system ..................................... 10, 11

Silencer, see Exhaust system .................. 90

Spare keys ................................................ 28

Spare wheel ........................................... 111

Speed ................................................. 84, 85

Fuel consumption .......................... 84, 85

Speedometer ........................................... 22

Starter switch ..............................................5

Starting the engine ...............5, 15, 29, 106

Self-help ............................................. 106

Steam-jet cleaners ................................ 143

Steering column lock ........................... 5, 16

Storage box ............................................. 45

Sun roof .................................................... 71

Sun shade ................................................ 71

Sun visors ................................................. 48

Tachometer ............................................. 22

Tail lights .................................................. 66

Bulb replacement .............................. 124

Tailgate .............................................. 30, 35

Tank

Fuel gauge ........................................... 23

Technical data ...................................... 144

Telephone, see Mobile telephone .......... 26

Temporary spare wheel ........................101

The first 600 miles / 1000 km .................. 82

Tightening torque ................................. 117

Tools ....................................................... 111

Towing ...........................................108, 109

Towing equipment ................................ 103

Towing eye ....................................108, 109

162

Trailer/caravan towing .......................... 102

Transmission ............................................14

Tray ...............................................45, 46, 47

Tread dep th .............................................98

Trip odometer ..........................................22

Triple information display .......................24

Turn signal lights .....................................11

Turn signals

Bulb replacement ............................... 124

Tyre chains .....................................100, 152

Tyre condition ..........................................98

Tyre pressure ..............................82, 97, 152

Underb ody wash ................................... 143

Unleaded fuel ..................................86, 146

Used oil ................................................... 133

Vauxhall Service ..............................16, 128

Vehicle care ............................................ 140

Vehicle decomm issioning ...................... 139

Vehicle identification number ............... 144

Vehicle keys, see Keys .............................28

Vehicle recommissioning ....................... 139

Vehicle tools ........................................... 111

Ventilation .......................................... 72, 76

Warning buzzers ..................................... 15

Warning triangle, .................................... 65

Weights .................................................. 150

Wheels ................................................96, 98

Wheels, tyres ............................................ 96

Windows .............................................69, 70

Demisting and defrosting .............77, 79

Windscreen wash system ........................ 12

Anti-freeze protection .......................138

Capacities .......................................... 155

wash bottle ........................................ 137

Windscreen wipers ........................... 12, 137

Winter operation

Battery .................................................. 83

Coolant, a nti-freeze .......................... 134

Fuel consumption ................................ 85

Heating ................................................. 72

Locks ................................................... 143

Tyre chains .................................100, 152

Window demisting and defrosting ..... 77

Windscreen wa sh system,

antifreeze p rotection ......................... 138

Winter tyres ....................................100, 152

AGILA

Reproduction or translation, in whole or in parts, is not

permitted without prior written consent from Vauxhall Motors

Ltd.

All rights as understood under the copyright laws are explicitly

reserved by Vauxhall Motors Ltd.

All information, illustrations and specifications contained in this

manual are based on the latest production information

available at the time of publication.

The right is reserved to make changes at any time without

notice.

Edition: July 2006.

TS 1525-A-07

AGILA

Operation, Safety and Maintenance

Owner’s Manual

TS1649-A-07.qxd 15/06/2006 07:10 Page 1

Vauxhall Agila 2006 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Vauxhall Agila 2006

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info