756798
7
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
POWXG9100 EN
Copyright © 2021 VARO NV Page | 7 www.varo.com
9.4 Assembly of the panel and lance hook (Fig. 4)
Mount the panel with the 4 screws M6x50 and 4 lock nuts M6.
9.5 Assembly of the spray gun (Fig. 5-6)
Fit the lance to the gun. Grip the end of the gun and screw the lance onto the gun ensuring it
is tight. Do not over tighten as this could damage both the connectors
Connect the high pressure hose connector to the connector on the underside of the gun
assembly ensuring that it is tight. Do not over tighten as this could damage both the
connectors.
10 BEFORE OPERATION
To prepare your pressure washer for operation, you will need to perform these tasks:
Add oil to engine crankcase.
Add fuel to fuel tank.
Connect high pressure hose to spray gun and pump.
Connect water supply to pump.
Attach nozzle extension to spray gun.
Note: the engine and pump on your new pressure washer will often have an improved
performance after a break of several hours.
10.1 Add oil to the engine crankcase (Fig. 7)
Do not attempt to start the pressure washer without filling the engine crank case with the
proper amount and type of oil (15W-40). In delivery status the pressure washer has no oil
inside the engine crank case. Operating the unit without oil will cause engine damage. Place
the machine on a level surface and remove the oil filler cap.
The engine has two oil fill points at the front and back of the engine. Remove the desired cap
and fill with the engine oil specified to the upper level mark.
Add engine oil to at least half of the dipstick.
The engine is equipped with an oil level sensor. The oil level sensor
switches the engine off if the oil level is too low and prevents a restart. If
the engine cuts out although the oil level is correct, check whether the
petrol-powered high-pressure cleaner is standing straight.
10.2 Add fuel to fuel tank (Fig. 8)
The pressure washer is powered by a four-stroke engine (14), which uses unleaded petrol
fuel.
Use a suitable funnel to fill in the fuel to the engines fuel tank (11). Do not spill any fuel or
overfill the tank. The fuel tank should not be filled above the top of the fuel filter.
10.3 Connecting the water hose to the High pressure washer (Fig. 9)
Run water through the hose for a few seconds to flush any debris from the hose.
Inspect inlet screen and remove any debris.
Connect hose to water inlet and tighten by hand.
Turn on water.
Do not run the pump without connecting to the water supply and turning
the water on. Such failure can damage the pressure washer.
10.4 Connect the high-pressure hose to the delivery pipe outlet (Fig .10)
Attach the end of the high pressure hose to the high pressure outlet.
Turn on the water supply and squeeze the gun trigger until the water flows in a steady
stream through the lance. Do not use water which exceeds 50 °C.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Varo POWXG9100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Varo POWXG9100 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Varo POWXG9100

Varo POWXG9100 Gebruiksaanwijzing - Nederlands - 14 pagina's

Varo POWXG9100 Gebruiksaanwijzing - Deutsch - 15 pagina's

Varo POWXG9100 Gebruiksaanwijzing - Français - 15 pagina's

Varo POWXG9100 Aanvulling / aanpassing - Alle talen - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info