POWX0562 EN
Copyright © 2019 VARO P a g e | 3 www.varo.com
PLUNGE SAW 1200 W
POWX0562
1 APPLICATION
The plunge saw is intended to cut wood and similar materials, gypsum and cement-bonded
fibre materials and plastic. With compatible special saw blades the plunge saw can also be
used to cut aluminium.
It is not designed for commercial use.
The plunge saw is only to be used with a specifically designed guide rail.
Installation in a different or homemade guide rail or workbench can cause
serious accidents.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1. Main handle
2. Front handle
3. Safety button
4. On/off switch
5. Base plate
6. Adjusting knob for cutting depth
7. Scale for cutting depth
8. Adjusting knob for cutting angle
9. Scale for cutting angle
10. Dust extraction tube
11. Saw blade
12. Blade change locking lever
13. Motor
14. Shaft locking button
15. Cut indicator
16. Adjusting knob for rail
17. Hex key
18. Cutting depth indicators
19. Rails
20. Screws
3 PACKAGE CONTENT LIST
▪ Remove all packing materials.
▪ Remove remaining packaging and transit supports (if existing).
▪ Check the completeness of the packing content.
▪ Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
▪ Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
1 x plunge saw
1 x blade
2 x hex key
4 x guiding rails
6 x bars for connecting guiding rails
2 x clamps
When parts are missing or damaged, please contact your dealer.
