POWDPG75560 EN
Copyright © 2021 VARO P a g e | 6 www.varo.com
▪ Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
▪ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
▪ Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
5.5 Service
▪ Have your power tool serviced by a qualified person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
6 ADDITIONAL SAFETY INSTRUCTIONS FOR LAWN MOWERS
▪ This device should not be used by children. Children should be supervised to ensure that
they do not play with the appliance. Cleaning and maintenance may not be performed by
children.
▪ This unit can be used by persons with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, on condition that they have been given supervision or
instruction concerning the safe use of the equipment and understand the resulting risks.
▪ Familiarize yourself with the instructions and the proper use of the machine.
▪ Avoid wearing loose clothing or clothing with hanging cords or belts.
▪ Worn or damaged parts must be replaced.
▪ Be especially careful when turning the mower around and when pulling it towards you.
▪ Do not start the engine when the grass bag is not installed.
▪ Be aware that on machines with multiple cutting blades, the movement of a cutting
diameter can lead to rotations of the other blades on it.
▪ When adjusting the machine make sure that no fingers are trapped between moving
cutting knives and fixed parts of the machine.
▪ Allow the engine to cool before storing machine.
▪ When servicing the cutting blade, note that even if the power supply is switched off, the
blades can still be moving.
▪ Replace worn or damaged parts for safety. Use only original spare parts and accessories.
▪ The machine should be operated with a tripping current not exceeding 30 mA via a
residual current device (RCD).
▪ Never allow children or people unfamiliar with these instructions to use the lawnmower.
Local regulations may restrict the age of the operator.
▪ Never mow while people, especially children or pets, are nearby.
▪ The operator or user is responsible for accidents or hazards occurring to other people or
their property.
▪ Do not operate the lawnmower when barefoot or wearing open sandals, always wear
substantial footwear and long trousers.
▪ Thoroughly inspect the area where the lawnmower is to be used and remove all stones,
sticks, wires, bones and other foreign objects.
▪ Before using, always visually inspect to see that the blades, blade bolts and cutter
assembly are not worn or damaged.
▪ Replace worn or damaged blades and bolts in sets to preserve balance.
▪ Mow only in daylight or in good artificial light.
▪ Avoid operating the lawnmower in wet grass, where feasible.
▪ Walk, never run.
