POWDP25200 EN
Copyright © 2021 VARO P a g e | 10 www.varo.com
▪ Adjust the angle of the cut to any desired setting between 0 and 45°.
11 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
11.1 Cleaning
▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
11.2 Lubrication
From time to time, apply a drop of oil to the thread of the lock screw.
12 TECHNICAL DATA
ATTENTION! The sound power level may exceed 85 dB(A), in this case
individual hearing protection shall be worn.
14 SERVICE DEPARTMENT
▪ Damaged switches must be replaced by our after-sales service department.
▪ If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
