813305
4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
4
Do not close the air controls until the fire is burning
well.
If the fire subsides re-open the combustion air
control to re-establish the flames.
Experience establishes settings to suit personal
preferences.
Do not burn large amounts of fuel with the combustion
air control closed for long periods of time. This reduces
the glass cleaning effect and causes tars and creosotes
to build-up in the appliance and flue system and will
produce excessive amounts of smoke.
When in use, burning the appliance at high output for a
short period also reduces tars and creosote.
When running the appliance:
Refuel little and often for clean, efficient burning.
Wood burns best on a bed of ash.
A bright and clean firebox indicates the appliance is
burning well.
5. Controlling the air
The appliance has various features for the air control.
Ignition air control
The valve on the ash-pan is constructed as an ignition
air control and should only be used when lighting the
appliance. When the appliance is burning the valve
should to be closed.
- Burning position: The control is closed when the handle
is in the vertical position.
- Ignition position: The control is open when the handle
is in the horizontal position with the hole at the top.
When the fire is burning steadily the control must be
turned back to the burning position.
Combustion air
Pre-heated air for the combustion process, which, can
be altered according to the desired room temperature
and the effectiveness of the chimney.
A high level of chimney draught requires a smaller intake
of combustion air.
Tertiary air (pre-set)
Constantly added air, which makes the appliance burn
even cleaner and lowers the content of tar and soot in
the combustion process to an absolute minimum.
At optimal combustion settings, the glass and
combustion chamber will be burnt completely clean and
the remaining amount of ashes will be minimal.
5. Advice
Never burn wood with an open door.
If you frequently have low intensity fires, tar and creosote
may be deposited in the chimney. Tar and creosote are
highly combustible substances. Thicker layers of these
substances might catch fire when the temperature in the
chimney increases suddenly and steeply. Therefore it is
necessary for the fire to regularly burn at a high output for
short periods, so that layers of tar and creosote
disappear.
Low intensity fires also cause tar deposits on the
appliance window and door.
When the outside temperature is not very low, it is better
to burn wood intensely for a few hours instead of having
a low intensity fire for a long period of time.
Control the air supply with the combustion air control.
The combustion air inlet not only supplies air to the fire
but to the glass as well, so that it does not get
dirty so quickly.
Open the ignition air control for a time if the air supply by
the combustion air inlet is inadequate or if you want to
boost the fire for a short period.
Do not use the appliance continuously with the
air controls fully open.
It is better to add a small amount of logs regularly than to
add many logs at the same time.
6. Extinguishing the fire
Do not add fuel and just let the fire go out. If a fire is
damped down by reducing the supply of air, harmful
substances will be produced and released. Therefore, let
the fire go out naturally. Keep an eye on the fire until it is
gone out. If the fire has died completely, all air inlets can
be closed.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Varde Shape - Smoke Control Kit bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Varde Shape - Smoke Control Kit in de taal/talen: Engels als bijlage per email.

De handleiding is 0.87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info