Handleiding Varde Samso Multi-fuel (pagina 6 van 20) (Engels)

813320

Verklein

Vergroot

Pagina terug

1/20

Pagina verder

Fuel Overloading

The maximum amount of fuel specified in this manual should

not be exceeded, overloading can cause excess smoke.

6.8 Do not burn continuously with the door open.

7. Burning Tips

7.1 Fuel Quality (Wood)

Use wood with a moisture content of less than 20%.

Seasoned logs have the bark beginning to lift and peel away

and cracks radiating from the centre. They feel lighter than

fresh cut wood of a similar size and sound hollow when

struck against each other. Logs should not feel damp or

have moss and fungal growths.

Symptoms related to wet wood:

— Difficulty starting and keeping a fire burning well.

— Smoke and small flames.

— Dirty glass and/or firebricks.

— Rapid creosote build-up in the chimney.

— Low heat output.

— Short burn times, excessive fuel consumption and

blue/grey smoke from the chimney.

Run at a high temperature for a short period each day

to avoid large build-ups of tars and creosote within

the appliance and the flue system. Use Stovax Protector

chimney cleaner to reduce this problem.

8. Chimney Sweeping

8.1 To maintain safe and efficient use of the appliance, the

chimney/flue must be inspected and swept at least once a

year by a qualified chimney sweep*.

If the appliance is used continuously throughout the year,

or it is used to burn wood, more frequent sweeping is

recommended.

The best time to have the chimney swept is at the start of

the heating season.

8.2 The chimney, any connecting flue pipe and the appliance

flue ways, if incorporated, must be regularly cleaned.

8.3 Ensure adequate access for cleaning where it is not possible

to sweep through the chimney.

8.4 If the chimney is believed to have previously served an open

fire it must be swept a second time within a month of regular

use after installation.

9. Annual Service

9.1 Before the start of the heating season strip, inspect and

clean the appliance as detailed:

—Allow appliance to cool.

—Remove all internal parts. Take care handling firebricks (if

applicable) as they can become fragile after a period of use.

—Sweep the appliance chimney/flue at this point if

necessary.

—Vacuum clean any remaining ash and debris from the

inside of the appliance. Stovax offer a filter/collection

attachment for vacuum cleaners to protect them from fire

ash: Ash Clean (Stovax Part No. 2091).

—Check the parts for any damage. Replace any damaged

parts using only genuine replacements parts.

— Check and clean the firebricks (if applicable) with a soft

brush.

Some surface damage will occur during use. The life of the

bricks will depend on the type of fuels burnt and the level of

use. Replace damaged bricks as soon as possible.

— Re-fit cleaned internal parts.

9.2 On appliances with printed glass do not use cleaning

agents that have a high alkaline or acidic content, for

example Stovax Gel Cleaner, these are aggressive

cleaning agents designed to be used with heavily

stained clear glass.

On printed glass surfaces, only use Stovax Glass

Cleaner (Stovax No.4103) which is better formulated for

this application.

— Before applying a cleaning agent remove any dust and

loose soot with a damp cloth.

— Use an appropriate glass cleaner. Apply the cleaning fluid

to a cloth before rubbing onto the glass.

Apply carefully and do not apply excessively. Try to

prevent any run off which could soak into the rope seals

around the edge of the glass.

Soot can also contain acidic particles that can cause

corrosive damage to printed glass.

— Remove dirt with a moist cloth and buff dry.

— Before relighting the appliance ensure the glass is fully

dried.

If the rope seal has absorbed excess cleaning agent

it is advisable to replace the rope as soon as possible to

preserve the printed finish of the glass.

9.3 Some types of wood and solid fuel can cause a white

residue to form on the glass.

If this occurs it should be cleaned off at least once a

week during periods of heavy usage.

If the liquid cleaning agents recommended do not

remove this residue use a dry cleaning pad which will

help remove these white marks.

9.4 Check door rope seal and replace if required.

User Instructions/Care & Maintenance

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Varde Samso Multi-fuel Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Varde Samso Multi-fuel

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info