748582
11
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Care and maintenance 5
0020258609_00 ecoVIT exclusiv Operating instructions 11
5.3.2 Filling the heating installation
Caution.
Risk of material damage due to heating
water that is extremely calciferous or cor-
rosive or contaminated by chemicals.
Unsuitable tap water damages the seals
and diaphragms, blocks components in the
product and heating installation through
which the water flows and causes noise.
Only fill the heating installation with suit-
able heating water.
In case of doubt, ask a competent person
for details.
1. Ask a competent person where the filling cock is loc-
ated.
2. Connect the filling cock to a hot water supply in the way
you were told by the competent person.
3. Open all radiator valves (thermostatic radiator valves) of
the heating installation.
4. Open the hot water supply.
5. Slowly open the filling cock.
6. Fill it with water until the required filling pressure is
reached.
7. Close the hot water supply.
8. Purge all radiators.
9. Then check the filling pressure on the display.
10. Top up with more water if necessary.
11. Close the filling cock.
5.4 Checking the condensate discharge pipe
and tundish
The condensate discharge pipe and tundish must always be
penetrable.
Regularly check the condensate discharge pipe and tun-
dish for faults and, particularly, for blockages.
You must not be able to see or feel any obstructions in the
condensate discharge pipe and tundish.
If you notice a fault, have it eliminated by a competent
person.
5.5 Carrying out the flue gas analysis
Note
Measurement and inspection work must only be
carried out by the chimney sweep or competent
person.
2
1
1 + button 2 button
1. Switch on the chimney sweep function by pressing the
and + buttons for the DIA system at the same time.
Shown in the display: S.Fh = Heating chimney
sweep mode; S.Fb = Domestic hot water chimney
sweep mode
The product now works at maximum load for 15
minutes. If you do not press any buttons for 15
minutes or if a flow temperature of 85 °C is reached,
the chimney sweep function is automatically
switched off.
2. Take the measurements at the earliest after three
minutes of the product operating.
Applicability: VKK 226/4, VKK 286/4, VKK 366/4
Remove the upper casing ( Installation instructions).
Use the test points that are underneath for the meas-
urement ( Installation instructions).
Applicability: VKK 476/4, VKK 656/4
12
1 Flue gas test point 2 Fresh air test point
Use the test points on the adapter for the measure-
ment, as shown.
3. Unscrew the sealing cap from the flue gas test point (1).
4. Remove the sealing cap from the combustion air test
opening (2).
5. Take the measurements in the flue gas route at the flue
gas test point.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vaillant ecoVIT exclusiv VKK 366-4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vaillant ecoVIT exclusiv VKK 366-4 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Vaillant ecoVIT exclusiv VKK 366-4

Vaillant ecoVIT exclusiv VKK 366-4 Gebruiksaanwijzing - Deutsch - 20 pagina's

Vaillant ecoVIT exclusiv VKK 366-4 Gebruiksaanwijzing - Français - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info