809799

VTech RM5764HD Handleiding

1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Congratulations
on purchasing your new VTech product.
Before using this HD video monitor, please read the Important safety instructions.
Quick start guide
RM5764HD
5” Smart Wi-Fi 1080p
Pan and Tilt Monitor
VTech 5” Smart Wi-Fi 1080p Pan and Tilt Monitor allows you to stay close to your baby
when you are on the move or away.
This monitor is Wi-Fi enabled, which uses your home wireless network to stream live
video and audio through the HD baby unit and 5-inch colour screen parent unit. It
allows you to maintain a constant connection to your baby.
You can also monitor from your smartphone and mobile tablet.
VTech 5” Smart Wi-Fi 1080p Pan and Tilt Monitor uses MyVTech Baby Pro app to let you
instantly see and hear what’s happening with your baby from anywhere in the world.
Download the app at the App Store or the Google PlayTM Store directly from your
smartphone or mobile tablet.
What does this HD Video Monitor do?
For better security and more stable connectivity, this baby monitor requires
connecting to a Wi-Fi network and operating in Router mode connection.
Direct mode
Your baby monitor parent unit and baby unit connect to each other in Direct mode by default, which
allows you to immediately stream video out of the box.
It is NOT recommended to continue using Direct Mode connection after initial installation.
Local access
You may experience reduced signal
strength if your parent unit and
baby unit are far apart, or there are
obstructing factors, such as internal
walls, between them. You have to
set up Router mode to connect the
units via your home Wi-Fi network to
improve the connection between your
parent unit and baby unit.
Router mode
You are required to set up your monitor in
Router mode to enjoy live video streaming via
your parent unit with an enhanced connection.
Router mode is the recommended mode for
stable connectivity.
Router mode uses your home Wi-Fi network
to connect your video monitor. It supports live
video streaming through the parent unit and
smartphone app.
If you want to stream live video remotely with
your mobile device, download and install
the MyVTech Baby Pro mobile app. With
the mobile app, your Wi-Fi router (not included) provides Internet connectivity to your HD video
monitor system. It serves as a communicating channel between your baby unit and mobile device,
allowing you to monitor and/or control your baby unit wherever you are. For more details, see
Download app for mobile access section in this quick start guide.
Note
• When both parent unit and app are viewing the camera simultaneously, the video
quality will be optimised to deliver the best possible viewing result.
Overview
What’s in the box
Connect, charge and power on the baby monitor
Protect your privacy and online security
Your HD video monitor package contains the following items.
Save your sales receipt and original packaging in the event warranty service is necessary.
How the system works
VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of
industry-recommended best practices to help keep your wireless connection private and
your devices protected when online. We recommend you carefully review and consider
complying with the following tips.
Ensure your wireless connection is secure.
• Before installing a device, ensure your router’s wireless signal is encrypted by selecting
the “WPA2-PSK with AES” setting in your router’s wireless security menu.
Change default settings.
• Change your wireless router’s default wireless network name (SSID) to something unique.
• Change default passwords to unique, strong passwords. A strong password:
- Is at least 10 characters long.
- Is complex.
- Does not contain dictionary words or personal information.
- Contains a mix of uppercase letters, lowercase letters, special characters and numbers.
Keep your devices up to date.
• Download security patches from manufacturers as soon as they become available. This
will ensure you always have the latest security updates.
• If the feature is available, enable automatic updates for future releases.
Disable Universal Plug and Play (UPnP) on your router.
• UPnP enabled on a router can limit the effectiveness of your firewall by allowing other
network devices to open inbound ports without any intervention or approval from you.
A virus or other malware program could use this function to compromise security for the
entire network.
For more information on wireless connections and protecting your data, please review the
following resources from industry experts:
1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips
–
www.fcc.gov/consumers/guides/how-protect-yourself-online.
2. U.S. Department of Homeland Security: Before You Connect a New Computer to the
Internet –
www.us-cert.gov/ncas/tips/ST15-003.
3. Federal Trade Commission: Using IP Cameras Safely –
https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely.
4. Wi-Fi Alliance: Discover Wi-Fi Security –
http://www.wi-fi.org/discover-wi-fi/security.
Parent unit icons
Connect the baby monitor
• The rechargeable battery in the parent unit is built-in.
• Use only the power adaptors supplied with this product.
• Make sure the parent unit and the baby unit are not connected to an electronically controlled electric outlet.
• Connect the power adaptors in a vertical or floor mount position only. The adaptor prongs are not
designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling,
under-the-table, or cabinet outlets. Otherwise, the adaptors may not properly connect to the outlets.
• Make sure the parent unit, the baby unit, and the power adaptor cords are out of reach of children.
Charge the parent unit battery before use
The parent unit runs on rechargeable battery or AC power. To continuously monitor your
baby, keep the parent unit connected to AC power. With the battery alone, the parent unit
cordlessly runs for a shorter amount of time.
• Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When
the parent unit battery is fully charged, the battery icon becomes solid .
• The standby time varies depending on your actual use.
The parent unit turns on automatically after connecting to the power socket, and the
welcome screen appears. You can press POWER o turn the parent unit on or press and hold
to turn it off.
The battery icon indicates the battery status (see the following table).
Battery indicators Battery status Action
alert displays on the parent
unit screen, and the battery icon
shows empty , with the
light flashes.
The battery has very little
power and may only be
used for a short time.
Charge
without interruption
(about 30 minutes).
The battery icon becomes solid
.
The battery is fully
charged.
To keep the battery charged,
connect it to AC power when
in use.
Slide the switch to ON to power on your baby unit.
• When powering up, the baby unit’s status LED turns on.
It will turn off after a while and stays off.
• The status LED is set to off by default. If you want to
keep the LED on, press MENU, then go to
> Status LED and turn it on.
Main
Menu Options
Melodies and soothing sounds
• Select to play all melodies, or play
one of the five melodies and five
soothing sounds.
• You can also set the timer to stop
lullaby playing after 15, 30 or 60
minutes, or play non-stop.
Alerts - Sound, motion and temperature
• Turn on/off sound detection,
motion detection, and
temperature alerts.
• Select the sound and motion
sensitivity level.
• Select maximum and minimum
temperature for alert range.
• Set the temperature format to
Fahrenheit (oF) or Celsius (oC).
Parent unit screen settings
• Adjust parent unit screen
brightness.
• Adjust Low Battery Alert Tone
volume level.
• Adjust No Link Alert Tone
volume level.
• Turn on/off dim mode.
Baby unit settings
• Turn on/off Night Vision.
• Turn on/off baby unit’s status LED.
• Adjust baby unit’s speaker volume.
General settings
• Connect to home Wi-Fi network.
• Connect mobile phone.
• Reset settings to factory default.
• Software Update.
Baby unit overview
1Light sensor
2Camera lens
3Microphone
4Infrared LEDs
• Allow you to see clearly in a dark
surrounding.
5LED indicator
• Orange is steady on when the baby
unit is connected to the parent unit
directly in local mode.
• Green is steady on when the baby
unit and parent unit are connected to
your home Wi-Fi network via the Wi-Fi
router.
• Flashes orange slowly during video
streaming in local mode.
• Flashes green slowly during video
streaming via home Wi-Fi network.
6ON
• Power on/off switch.
7Speaker
8Power jack
9Temperature sensor
10 Slots for wall mounting
• Wall mount bracket is included in
your package.
11 PAIR
• The parent unit and baby unit
provided are already paired.
• Reset the baby unit to factory default.
1. Press and hold PAIR key until you
hear a beep sound.
2. Release the PAIR key, and then
press the PAIR key again five
times until you hear another beep
sound.
3. The baby unit will sound another
beep when the reset completes.
Then, the baby unit will reboot.
1
2
3
5
6
4
7
8
9
10
11
1
2
3
5
6
4
7
8
9
10
11
1
2
3
5
6
47
8
9
10
11
Power on
Power o
NOTE:
Camera lens and surface may get
warm during normal operation.
WARM
WARM
Mobile access Enhanced local access
The applied nameplate is located at the bottom of the baby
unit’s base.
When using your equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and injury, including the following:
1. Follow all warnings and instructions marked on the
product.
2. Adult setup is required.
3. CAUTION: Do not install the baby unit at a height above
2 metres.
4. This product is intended as an aid. It is not a substitute for
responsible and proper adult supervision and should not be
used as such.
5. This product is not intended for use as a medical monitor.
6. Do not use this product near water, for example, near to a
bath, sink, swimming pool or shower.
7. CAUTION:
Use only the battery provided. There may be a
risk of explosion if a wrong type of battery is used for the
parent unit. The battery cannot be subjected to high or low
extreme temperature and low air pressure at high altitude
during use, storage or transportation. Disposal of battery
in fire or a hot oven, mechanically crushing or cutting the
battery can result in an explosion. Leaving the battery in an
extremely high temperature surrounding environment can
result in an explosion or the leakage of flammable liquid of
gas. Battery subjected to extremely low air pressure may
result in an explosion or the leakage of flammable liquid or
gas. Dispose of used batteries according to the instructions
.
8. Use only the power adaptors included with this product.
Incorrect power adaptor polarity or voltage can seriously
damage the product
.
Power adaptor information:
Parent unit output: 5V DC 1A
VTech Telecommunications Ltd.
Model: VT05EEU05100 (EU), VT05EUK05100 (UK).
Baby unit output: 5V DC 1A.
VTech Telecommunications Ltd.
Model: VT05EEU05100 (EU), VT05EUK05100 (UK).
Rechargeable battery information:
3.8V 2100mAh Lithium-ion Polymer battery
Zhongshan Tianmao Battery Co., Ltd.
Model Number: BP1763
9. The power adaptors are intended to be correctly
oriented in a vertical or floor mount position. The prongs
are not designed to hold the plug in place if it is plugged
into a ceiling, under-the-table or cabinet outlet.
10. For pluggable equipment, the socket-outlet should
be installed near the equipment and should be easily
accessible.
11. Unplug this product from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
12. Do not modify the power adaptors or replace with other
adaptors, as this causes a hazardous situation.
13. Do not allow anything to rest on the power cords. Do not
install this product where the cords may be walked on or
crimped.
14. This product should be operated only from the type
of power source indicated on the marking label. If you
are not sure of the type of power supply in your home,
consult your dealer or electricity supply provider.
15. Do not overload wall outlets or use an extension cord.
16. The equipment is to be supplied from an identified USB
port complying with the requirements of Limited Power
Source.
17. Do not place this product on an unstable table, shelf, stand
or other unstable surfaces.
18. This product should not be placed in any area where
proper ventilation is not provided. Slots and openings
in the back or bottom of this product are provided for
ventilation. To protect them from overheating, these
openings must not be blocked by placing the product on a
soft surface such as a bed, sofa or rug. This product should
never be placed near or over a radiator or heat source.
19. Never push objects of any kind into this product through
the slots because they may touch dangerous voltage
points or create a short circuit. Never spill liquid of any
kind on the product.
20. To reduce the risk of electric shock, do not isassemble
this product, but take it to an authorised service
acility. Disassembling or removing parts of the
product other than via the battery door may expose
you to dangerous voltages or other risks. Incorrect
reassembling can cause electric shock when the
product is subsequently used.
21. You should test the sound reception every time you turn
on the units or move one of the components.
22. Periodically examine all components for damage.
23. There is a very low risk of privacy loss when using certain
electronic devices, such as baby monitors, cordless
telephones, etc. To protect your privacy, make sure the
product has never been used before purchase, reset
the baby monitor periodically by powering off and
then powering on the units, and power off the baby
monitor if you are not intending to use it for some time.
24. The small parts of this monitor can be swallowed by
babies or small children. Keep these parts out of reach
of children
25. Children should be supervised to ensure that they do not
play with the product.
26. The product is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their
safety.
SAVE THESE INSTRUCTIONS
Cautions
1. Use and store the product at a temperature between 0oC
and 40oC.
2. Do not expose the product to extreme cold, heat or direct
sunlight. Do not put the product close to a heating source.
3. Batteries should not be exposed to excessive heat such as
bright sunshine or fire.
4. Mishandling batteries can cause burn, fire or explosion
hazards.
5. Warning—Strangulation Hazard—
Children have STRANGLED in cords. Keep
this cord out of the reach of children (more
than 0.9m away. Do not
remove warning
label on the adaptor cord
.
6. Never place the baby unit(s) inside the baby’s cot or
playpen. Never cover the baby unit(s) or parent unit with
anything such as a towel or a blanket.
7. Other electronic products may cause interference
with your baby monitor. Try installing your baby
monitor as far away from these electronic devices
as possible: wireless routers, radios, cellular
telephones, intercoms, room monitors, televisions,
personal computers, kitchen appliances and cordless
telephones.
Important safety instructions
x 2 x 2
Quick start guide
For mobile access:
MyVTech Baby Pro mobile app
Network Wi-Fi
Wi-Fi router 2.4GHz 802.11 b/g/n
Internet connection 1.5 Mbps @ 720p or 2.5 Mbps @1080p upload
bandwidth per baby unit
Requirements
Parent unit overview
1LINK LED light
• On when the parent unit is linked to
the baby unit.
• Flashes when the link to the baby unit
is lost.
2 LED light
• On when the parent unit is connected
to AC power, and the battery is
charging.
• Flashes when the parent unit battery is
low and needs charging.
33- level sound indicator light
• Green light is on when a low sound
level is detected by the baby unit.
• Green and amber lights are on when
a moderate sound level is detected by
the baby unit.
• Green, amber and red lights on when
a high sound level is detected by the
baby unit.
4TALK /
• Press and hold to talk to the baby unit.
• While in a submenu, press to exit.
5
• Press to zoom in/out.
• While in a submenu, press to view the
help menu.
6Arrow keys
, , or
• Press to navigate leftward, upward,
rightward or downward, within the
main menu and submenus.
• While viewing zoomed image, press
to move the zoomed image leftward,
upward, rightward or downward.
7MENU/SELECT
• Press to enter the main menu.
• While in a menu, press to choose an
item, or save a setting.
8- VOL/ VOL +
• Increase or decrease the parent unit’s
speaker volume.
9Microphone
10 Speaker
11 POWER / LCD ON/OFF
12 Power jack
13 RESET
• Force reboot the parent unit.
14 Antenna
15 Stand
2
1
3
4
5
6
7
8
9
12
13
14
15
11
10
Scan to learn more
on improving
connectivity.
Local access, for
start up quick view
and setup stage.
Status icons
Direct mode
The parent unit and baby unit
connect to each other directly.
Red bars indicate no connection.
Router mode
The parent unit and baby unit
connect via the Wi-Fi network.
The red icon on the baby
unit or parent unit, indicates
no connection between the
respective unit(s) and the router.
Night vision is turned on.
Motion alert is turned on.
Sound detection alert is turned on.
Melodies and soothing sounds are
turned on.
Parent unit speaker is muted.
Temperature alert is turned on.
Raise the parent unit
antenna for better
reception.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw VTech RM5764HD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van VTech RM5764HD in de taal/talen: Engels als bijlage per email.

De handleiding is 6.29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van VTech RM5764HD

VTech RM5764HD Installatiehandleiding - English - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info