698337
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Overview
What’s in the box
RM5762
Wi-Fi 1080p
Pan & Tilt Video Monitor
Go to www.vtechphones.com
to register your product for enhanced
warranty support and latest VTech
product news.
BC
Installation guide
What does HD Video Monitor do?
VTech Wi-Fi HD Video Monitor allows you to stay close to your baby when you are on the move
or away.
This monitor is Wi-Fi enabled, which uses your home wireless network to stream live video and
audio through the HD camera unit and 5-inch color screen parent unit. It allows you to maintain
a constant connection to your baby.
You can also monitor from your smartphone and mobile tablet.
VTech Wi-Fi HD Video Monitor uses MyVTech Baby 1080p app to let you instantly see and hear
what’s happening with your baby from anywhere in the world.
The app can be downloaded from the App Store or the Google Play
TM
Store, directly from your
smartphone or mobile tablet.
Congratulations
on purchasing your new VTech product. Before using this HD video monitor, please read
Important safety instructions.
For support, shopping, and everything new at VTech, visit our website at
www.vtechphones.com. In Canada, visit www.vtechcanada.com.
How the system works
1
Connect, charge and power on the baby monitor
Protect your privacy and
online security
Frequency Camera unit: 2412 - 2462 MHz
Channels 11
LCD 5’’ Color LCD
(IPS 480x272 pixels)
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may
vary according to environmental conditions at the time of use.
Power requirement 1. Parent unit power adapter:
Output: 5V DC 1.5A
2. Parent unit: 3.7V Li-polymer battery
Camera unit power adapter:
Output: 5V DC 1500mA
Google Play and the Google Play logo are trademarks of Google LLC.
App Store is a trademark of Apple Inc., registered in the U.S. and other countries.
Specifications are subject to change without notice.
© 2019 VTech Communications, Inc.
All rights reserved. 06/19. RM5762_IG_V3
Document order number: 91-011734-030-100
Technical specifications
Slide the ON/OFF switch rightward to power off your camera.
Connect and charge the parent unit
Install the parent unit battery
The parent unit runs on rechargeable battery or AC power. To continuously
monitor your baby, keep the parent unit connected to AC power. With the battery
alone, the parent unit can cordlessly run for a short time only.
Use only the battery supplied with this product.
If the parent unit will not be used for a long time, disconnect and remove the battery to
prevent possible leakage.
Replace the battery
To replace the battery, press down on the battery compartment cover and pull it
out, then follow the steps above to install the battery.
Raise the parent unit antenna
x 2
x 2
Requirements
Make sure your system includes the following components, and they meet the minimum
requirement.
Network Wi-Fi
Wi-Fi router 2.4GHz 802.11 b/g/n
Internet connection
1.5 Mbps @ 720p or 2.5 Mbps @1080p upload
bandwidth per camera
MyVTech Baby 1080p mobile app Connect up to 10 camera units
Installation guide Important safety
instructions
Quick start guide
1
11
10
2
3
7
8
9
4
5
6
12
Camera unit overview
Your HD video monitor package contains the following items. Save your sales receipt and
original packaging in the event warranty service is necessary.
The Wi-Fi router (not included) provides Internet
connectivity to your HD video monitor system.
It serves as a communicating channel between
your camera unit and parent unit, allowing you
to monitor and/or control your camera unit
wherever you are.
VTech cares about your privacy and peace of mind. That’s why we’ve
put together a list of industry-recommended best practices to help
keep your wireless connection private and your devices protected
when online. We recommend you carefully review and consider
complying with the following tips.
Ensure your wireless connection is secure.
Before installing a device, ensure your router’s wireless signal is
encrypted by selecting the “WPA2-PSK with AES” setting in your
router’s wireless security menu.
Change default settings.
Change your wireless router’s default wireless network name
(SSID) to something unique.
Change default passwords to unique, strong passwords. A strong
password:
- Is at least 10 characters long.
- Is complex.
- Does not contain dictionary words or personal information.
- Contains a mix of uppercase letters, lowercase letters, special
characters and numbers.
Keep your devices up to date.
Download security patches from manufacturers as soon as they
become available. This will ensure you always have the latest
security updates.
If the feature is available, enable automatic updates for future
releases.
Disable Universal Plug and Play (UPnP) on your router.
UPnP enabled on a router can limit the effectiveness of your
firewall by allowing other network devices to open inbound
ports without any intervention or approval from you. A virus or
other malware program could use this function to compromise
security for the entire network.
For more information on wireless connections and protecting your
data, please review the following resources from industry experts:
1. Federal Communications Commission: Wireless Connections and
Bluetooth Security Tips –
www.fcc.gov/consumers/guides/how-protect-yourself-online.
2. U.S. Department of Homeland Security: Before You Connect a
New Computer to the Internet
www.us-cert.gov/ncas/tips/ST15-003.
3. Federal Trade Commission: Using IP Cameras Safely –
https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-
safely.
4. Wi-Fi Alliance: Discover Wi-Fi Security –
http://www.wi-fi.org/discover-wi-fi/security.
Connect the baby monitor
Use only the power adapters supplied with this product.
Make sure the parent unit and the camera unit are not connected to the switch controlled
electric outlets.
Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs
are not designed to hold the weight of the parent unit and the camera unit, so do not
connect them to any ceiling, under-the-table, or cabinet outlets. Otherwise, the adapters
may not properly connect to the outlets.
Make sure the parent unit, the camera unit and the power adapter cords are out of reach
of children.
Connect and power on the camera unit
To maintain compliance with the FCC’s RF exposure guidelines, place the camera unit at
least 20cm from nearby persons.
1. Connect the power adapter to the camera unit and a power supply.
2. Slide the ON/OFF switch leftward to power on your camera.
Parent unit overview
1
LED light
On when the parent unit is connected to
AC power, or the battery is charging.
Flashes when the parent unit battery is
low and needs charging.
Off when the parent unit is disconnected
from AC power.
2 LINK LED light
On when the parent unit is linked to the
camera unit.
Flashes when the link to the camera unit
is lost.
3
LED light
On when the parent unit speaker volume
is set to off.
On when the parent unit is talking to the
camera unit.
4 TALK LED light
On when the parent unit is talking to the
camera unit.
5 LCD display
6 Microphone
7 LCD ON/OFF
8 POWER
9
Lullaby
Press to enter the lullaby menu.
10 TALK
Press and hold to talk to the camera unit.
11 Arrow keys
While in the submenu, press to exit.
, , or
Press to move the selection box
leftward, upward, rightward or
downward.
While viewing image from the camera
unit, press and hold to pan the camera
unit camera leftward, upward, rightward
or downward.
While viewing zoomed image,
press and hold to move the zoomed
image leftward, upward, rightward or
downward.
12 MENU/SELECT
Press to enter the menu.
While in a menu, press to choose an
item, or save a setting.
13
Zoom in
14
Zoom out
15 - VOL/ VOL +
16 Power jack
17 Antenna
18 Speaker
19 Battery compartment cover
20 Stand
THIS SIDE UP
1
2
3
Press down on the battery
compartment cover to pull it out.
Make sure the label
THIS SIDE UP is facing
up while inserting the
battery.
1 Microphone
2 Camera lens
3 Light sensor
4 LED indicators
Flash yellow and blue alternately
when the camera unit is in pairing
mode.
Yellow is steady on when the camera
unit is connecting to the Internet.
Yellow and blue are steady on when
the camera unit is idle.
Flash yellow and blue slowly during
video streaming.
Flash yellow and blue quickly and
alternately when the camera unit is
updating its firmware.
5 Infrared LEDs
Allow you to see clearly in a dark
surrounding.
6
ON/OFF switch
7 Antenna
Connect to router with Wi-Fi.
8 Speaker
Caution
For hearing protection, do not
stand close to the HD camera
when the camera’s alarm goes off.
The loud alarm may damage your
hearing.
9 Temperature sensor
10 Power jack
11 Threaded socket
12 Pair/reset button
Press and hold for three seconds to
enter pairing mode.
20
11
12
13
14
15
17
10
8
9
18
16
19
7
6
2
3
4
5
1
Strangulation
Hazard
Keep this cord out of reach of children.
The cord needs to be at least three feet
away from the child at all times. Do not
use with an extension cord. Do not
remove this tag.
Éloignez ce cordon des enfants. Le
cordon doit se trouver à au moins trois
pieds d’un enfant et ce, en tout temps.
N’utilisez pas de rallonge. Ne retirez pas
cette étiquette.
Mantenga este cable fuera de la alcance
de los niños. Este cable debe estar por
lo menos tres pies fuera de la alcance
del niño en todo momento. No lo use
con una extensión inalámbrica. No quite
esta etiqueta.
Risque
d’étranglement
Riesgo de
estrangulación
Strangulation
Hazard
Keep this cord out of reach of children.
The cord needs to be at least three feet
away from the child at all times. Do not
use with an extension cord. Do not
remove this tag.
Éloignez ce cordon des enfants. Le
cordon doit se trouver à au moins trois
pieds d’un enfant et ce, en tout temps.
N’utilisez pas de rallonge. Ne retirez pas
cette étiquette.
Mantenga este cable fuera de la alcance
de los niños. Este cable debe estar por
lo menos tres pies fuera de la alcance
del niño en todo momento. No lo use
con una extensión inalámbrica. No quite
esta etiqueta.
Risque
d’étranglement
Riesgo de
estrangulación
THIS SIDE UP
ESTE LADO HACIA ARRIBA
CE CÔTÉ VERS LE HAUT
model: IS057
modèle: IS057
Recharageable Li-ion Battery
3.7V 1900mAh 7.03Wh
Pile au lithium-ion rechargeable
3,7V 1900mAh 7,03Wh
1ICP5/54/57
Limited charge voltage: 4.2V
Tension de charge limitée: 4,2V
Battery Pack: BT290865
Bloc-piles:BT290865
MANUFACTURER:
ICON ENERGY SYSTEM (SHENZHEN) CO.,LTD.
FABRICANT:
ICON ENERGY SYSTEM (SHENZHEN) CO., LTD.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw VTech RM5762 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van VTech RM5762 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van VTech RM5762

VTech RM5762 Snelstart handleiding - English - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info