599534
7
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
1
Dear Parent:
At VTech
®
we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best of their ability. Whether it’s introducing numbers and letters,
identifying colors and shapes, or stimulating senses with lights
and music, all VTech
®
infant and toddler learning products
encourage your child’s natural growth and discovery skills.
When it comes to providing electronic learning products that
enlighten, entertain and develop minds, at VTech
®
we see the
potential in every child.
2
INTRODUCTION
Thank you for purchasing VTech
®
Magic Paws™ learning toy! This product
is one of a family of high quality electronic learning toys. We at VTech
®
are committed to providing the best possible products to entertain and
educate your child. Should you have any questions or concerns, please
call our Consumer Services Department at 1-800-521-2010 in the U.S.
or 1-800-267-7377 in Canada.
The VTech
®
Magic Paws™ is a soft and cuddly plush bear designed for
infants from ages birth and up. This friendly bear has four interactive
sensors that trigger friendly phrases, lights, sound effects, and music.
The VTech
®
Magic Paws™ will act as a companion throughout baby’s
early years of development.
Proximity
Sensor
Paw
Press
Foot Press
Button
Velcro Opening
(the battery box
is stored inside)
Playtime/Off/
Soothing Mode
Selector switch
Paw Press
Button
Foot Press
Button
High/Low
Volume Switch
Light-up
Paws
Light-up
Paws
3
INCLUDED IN THIS PACKAGE
1. One VTech
®
Magic Paws™ learning toy
2. One instruction manual
WARNING: All packing materials, such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be
discarded for your child’s safety.
BATTERY INSTALLATION
1. Make sure the unit is turned off.
2. Open the velcro opening located on the
back of the unit. Locate the battery cover
on the back of the unit. Use a screwdriver
to loosen the screw.
3. Install 2 new “AA” (UM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the screw to secure the battery cover.
BATTERY NOTICE
Install batteries correctly observing the polarity ( +, - ) signs to avoid leakage.
Do not mix old and new batteries.
Do not use batteries of different types.
Remove batteries from the equipment when the unit will not be used
for an extended period of time.
Do not dispose of batteries in fire.
Do not attempt to recharge ordinary batteries.
The supply terminals are not to be short-circuited.
Only batteries of the same and equivalent type as recommended are
to be used.
4
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
NOTE: If for any reason the program/activity stops working, please follow
these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada, and a service representative will be happy to help you.
CRIB ATTACHMENT
To attach The VTech
®
Magic Paws™ to the crib,
unfasten the velcro bow tie and attach to the side
of the crib.
TO BEGIN PLAY
1. Slide the PLAYTIME/OFF/SOOTHING
MODE SELECTOR SWITCH to the
PLAYTIME MODE ( ) or SOOTHING
MODE ( ) position to turn the unit ON.
You will hear a short tune. The LIGHT-UP
PAWS will flash with the sound.
2. To adjust the volume, slide the HIGH / LOW
VOLUME CONTROL SWITCH to the ( )
position for HIGH VOLUME or the ( )
position for LOW VOLUME.
5
3. Slide the PLAYTIME/OFF/SOOTHING
MODE SELECTOR SWITCH to the OFF ( )
position to turn the unit OFF.
Note: The VTech
®
Magic Paws learning toy
will automatically turn off after about 30
seconds without input. The unit can be turned on again by
pressing any button, shaking the bear, or activating the sound sensor.
ACTIVITIES
PLAYTIME MODE
1. Turn on the unit by sliding the PLAYTIME/
OFF/SOOTHING MODE SELECTOR
SWITCH to the PLAYTIME MODE position
( ). You will hear a short tune. The
LIGHT-UP PAWS will flash with the sound.
2. Wave your hand in front of the bow tie to
activate the proximity sensor. You will hear
“Peek-a-boo” and a giggle sound effect.
The LIGHT-UP PAWS will flash with the sound.
3. Press one of the PAW PRESS BUTTONS
to hear “Patty-Cake, Patty-Cake” followed
by a short tune. The LIGHT-UP PAWS will
flash from paw to paw.
“Peek-a-boo”
“Patty-Cake,
Patty-Cake”
6
“Koochy coo”
4. Press one of the FOOT PRESS BUTTONS
to hear either “Koochy coo” or a giggle
sound effect. The LIGHT-UP PAWS will
flash according to which foot was pressed.
5. Gently shake the bear to hear “Weee!” or
random melodies. The LIGHT-UP PAWS
will flash with the sound.
6. Gently shake the bear while a melody is
playing to hear “Weee!” play on top of the
melody.
7. The VTech
®
Magic Paws™ will automatically shut-off after several
seconds without input. The unit can be re-activated by the sound
sensor. When any background noise is detected, you will hear "Grrr!",
"Bear Hug!" The LIGHT-UP PAWS will flash with the sound.
SOOTHING MODE
1. Turn on the unit by sliding the PLAYTIME/
OFF/SOOTHING MODE SELECTOR
SWITCH to the SOOTHIING MODE ( ).
You will hear “Shhhh, be beary beary
quiet!” followed by a short tune. The
LIGHT-UP PAWS will flash with the sound.
“Weee!”
“Weee!”
Shhh...
7
2. Wave your hand in front of the bow tie to
activate the proximity sensor. You will hear
“Night-Night!” or “Shhh, Quiet!” The
LIGHT-UP PAWS will flash with the sound.
3. Press one of the PAW PRESS BUTTONS
to hear random melodies. The LIGHT-UP
PAWS will flash with the sound.
4. Press one of the FOOT PRESS BUTTONS
to hear either “Koochy coo!” or a giggle
sound. The LIGHT-UP PAWS will flash
according to which foot was pressed.
5. Press one of the FOOT PRESS BUTTONS
while a melody is playing to hear “Koochy
coo!” or a giggle sound play on top of the
melody.
6. Gently shake the bear to hear "Shhhh" or
a kiss sound effect. The LIGHT-UP PAWS
will flash with the sound.
“Night-Night!”,
“Shhh, Quiet!”
“Koochy coo!”
“Koochy coo!”
“Shhhh”
8
7. Gently shake the bear while a melody is
playing to hear “Shhhh” or kiss sound play
on top of the melody.
8. The VTech
®
Magic Paws™ will automatically shut-off after several
seconds without input. The unit can be re-activated by the sound
sensor. When any background noise is detected, you will hear "Shhhh,
be beary quiet!" and random melodies. The LIGHT-UP PAWS will
flash with the sound.
PLAYTIME MELODIES
Mary Had a Little Lamb
Ring Around the Rosie
Pop Goes the Weasel
Skip to My Lou
SOOTHING MELODIES
Cannon in D
Fur Elise
Largo
Lullaby
CARE AND MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit away from direct sunlight and heat source.
“Shhhh”
9
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
IMPORTANT NOTE
Creating and developing infant/toddler products is accompanied by
a responsibility that we at VTech
®
take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes occur. It is
important for you to know that we stand behind our products and
encourage you to call our Consumer Services Department at 1-800-
521-2010 in the U.S. or 1-800-267-7377 in Canada with any problems
and/or suggestions that you might have. Our service representative
will be happy to help you.
NOTE:
This equipment generates and uses radio frequency energy and if not
installed and used properly, that is, in strict accordance with the
manufacturer’s instructions, it may cause interference to radio and
television reception. It has been type tested and found to comply within
the limits for a Class B computing device in accordance with the
specifications in Sub-part J of Part 15 FCC Rules, which are designed to
provide reasonable protection against such interference in a residential
installation. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause interference with
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measure:
reorient the receiving antenna
relocate this product with respect to the receiver
move this product away from the receiver
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw VTech Magic Paws bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van VTech Magic Paws in de taal/talen: Engels als bijlage per email.

De handleiding is 0,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info