809773
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
User’s guide
DM1212
Audio Baby Monitor When using your equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and injury, including the following:
1. Follow all warnings and instructions marked on the
product.
2. Adult setup is required.
3. This product is not a substitute for adult supervision of the
infant. Supervising the infant is the responsibility of the
parent or carer. This product could cease operating, and
therefore you should not assume it will continue working
properly for any given period of time. Further, this is not a
medical device and should not be used as such. This product
is intended to assist you in supervising your baby.
4. Do not use this product near water, for example, near to
a bath, sink, swimming pool or shower.
5. CAUTION: Use only the battery provided. There may be a risk
of explosion if a wrong type of battery is used for the parent
unit. The battery cannot be subjected to high or low extreme
temperature and low air pressure at high altitude during use,
storage or transportation. Disposal of battery into fire or a hot
oven, or mechanically crushing or cutting or the battery can
result in an explosion. Leaving the battery in an extremely
high temperature surrounding environment can result in an
explosion or the leakage of flammable liquid of gas. Battery
subjected to extremely low air pressure may result in an
explosion or the leakage of flammable liquid or gas. Dispose
of used batteries according to the instructions.
6. Use only the adaptors included with this product.
Incorrect adaptor polarity or voltage can seriously
damage the product.
7. Use only adaptors and battery listed below.
Power adaptor information:
VTech Telecommunications Ltd.
Model : VT05EEU06040(EU),VT05EUK06040(UK)
Ten Pao Industrial Co.,Ltd.
Model: S003ATV06040(EU),S003ATB06040(UK)
Rechargeable battery information:
Corun - Ni-MH AAA750X2-K
Ni-MH AAA750mAh 2.4V
8. The power adaptors are intended to be correctly oriented
in a vertical or floor mount position. The prongs are not
designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
9. For pluggable equipment, the socket-outlet should
be installed near the equipment and should be easily
accessible.
10. Unplug this product from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
11. Unplug the power cords before replacing batteries.
12. Do not cut off the power adaptors to replace them with
other plugs, as this causes a hazardous situation.
13. Do not allow anything to rest on the power cords. Do
not install this product where the cords may be walked
on or crimped.
14. This product should be operated only from the type
of power source indicated on the marking label. If you
are not sure of the type of power supply in your home,
consult your dealer or local power company.
15. Do not overload wall outlets or use an extension cord.
16. Do not place this product on an unstable table, shelf,
stand or other unstable surfaces.
17. This product should not be placed in any area where
proper ventilation is not provided. Slots and openings
in the back or bottom of this product are provided
for ventilation. To protect them from overheating,
these openings must not be blocked by placing the
product on a soft surface such as a bed, sofa or rug.
This product should never be placed near or over a
radiator or heat source.
18. Never push objects of any kind into this product through
the slots because they may touch dangerous voltage
points or create a short circuit. Never spill liquid of any
kind on the product.
19. To reduce the risk of electric shock, do not disassemble
this product, but take it to an authorized service facility.
Opening or removing parts of the product other than
specified access doors may expose you to dangerous
voltages or other risks. Incorrect reassembling can cause
electric shock when the product is subsequently used.
20. You should test the sound reception every time you turn
on the units or move one of the components.
21. Periodically examine all components for damage.
22. There is a very low risk of privacy loss when using certain
electronic devices, such as baby monitors, cordless
telephones, etc. To protect your privacy, make sure the
product has never been used before purchase, reset
the baby monitor periodically by powering off and then
powering on the units, and power off the baby monitor
if you will not use it for some time.
23. Children should be supervised to ensure that they do not
play with the product.
24. The product is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
SAVE THESE INSTRUCTIONS
Cautions
1. Use and store the product at a temperature between
0oC and 40oC.
2. Do not expose the product to extreme cold, heat or direct
sunlight. Do not put the product close to a heating source.
3. Batteries should not be exposed to excessive
heat such as bright sunshine or fire.
4. Warning—Strangulation Hazard—Children
have STRANGLED in cords. Keep this cord
out of the reach of children (more than 0.9m
away). Do not remove this tag.
5. Never place the baby unit inside the baby’s crib or
playpen. Never cover the baby unit or parent unit with
anything such as a towel or a blanket.
6. Other electronic products may cause interference with
your baby monitor. Try installing your baby monitor
as far away from these electronic devices as possible:
wireless routers, radios, cellular telephones, intercoms,
room monitors, televisions, personal computers, kitchen
appliances and cordless telephones.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless
devices):
Wireless Technology Research, LLC (WTR), an independent
research entity, led a multidisciplinary evaluation of the
interference between portable wireless devices and
implanted cardiac pacemakers. Supported by the U.S.
Food and Drug Administration, WTR recommends to
physicians that:
Pacemaker patients
Should keep wireless devices at least six inches from the
pacemaker.
Should NOT place wireless devices directly over the
pacemaker, such as in a breast pocket, when it is turned
ON.
WTR’s evaluation did not identify any risk to bystanders
with pacemakers from other persons using wireless
devices.
Electromagnetic fields (EMF)
This VTech product complies with all standards regarding
electromagnetic fields (EMF). If handled properly and
according to the instructions in this user’s manual, the
product is safe to be used based on scientific evidence
available today.
Important safety instructions
Power on or off the baby monitor
Press to power on the baby unit. The power indicator light turns on.
Press and hold to power off the baby unit. The power indicator light turns off.
Press and hold to power on or off the parent unit.
4 Positioning the baby monitor
> 1metre
> 2 m
< 2 m
Basic operation - baby monitor
NOTESNOTE
Note
To avoid interference from other electronic
devices, place your baby monitor at least 1
metre away from devices such as wireless
routers, microwaves, cell phones and
computers.
Caution
The default volume of your parent
unit is level 3. If you experience
feedback from your baby monitor
while positioning:
- Make sure your baby unit and parent unit
are more than 2 metres apart, OR
- Turn down the volume of your parent unit.
> 2m
26
o
C
26
o
C
Adjust speaker volume
Press / to adjust your parent unit
speaker volume.
Talk to your baby unit
Press and hold on the side of the parent unit.
The screen displays the icon when the voice connection to the baby unit is
made.
Press and hold
What’s in the box
User’s guide
NOTESNOTE
Use only the battery supplied with this product.
If the parent unit will not be used for a long time, disconnect and remove the battery to prevent
possible leakage.
Install the parent unit battery
1
2
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT166342/BT266342 (2.4V 750mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine CR1937
3
4
1
2
3
4
Connect the baby monitor
NOTESNOTE
Use only the power adaptors supplied with this product.
Make sure the baby monitor is not connected to a switch-controlled electric outlet.
Connect the power adaptors in a vertical or floor mount position only. The adaptors’ prongs
are not designed to hold the weight of baby monitor, so do not connect them to any ceiling,
under-the-table, or cabinet outlets. Otherwise, the adaptors may not properly connect to the
outlets.
Make sure the parent unit, the baby unit and the power adaptor cords are out of reach of
children.
With audio reminder feature preset to ON, the parent unit plays an audio reminder when
it is connected to a baby unit.
2
1
2
1
2
Overview - Baby unit
1
2
3
5
810
11
4
6
7
9
1
2
3
5
810
11
4
6
7
9
1Starry projector light
2Microphone
3PAGE
Press to start or stop paging parent
unit.
4
Press to turn the night light on or off.
5 (On/off)
Press to power on, and the power
light turns on.
Press and hold to power off, and
the power light turns off.
6Power indicator light
On when the baby unit is turned on.
7Night light
On when night light is turned on
manually.
Off when night light is turned off
manually.
8Speaker
9Temperature sensor
10
+
Press to increase the speaker
volume.
-
Press to decrease the speaker
volume.
11 Power jack
2
Connect and charge the battery
1
< 1 m
1 m
Nightlight
Press to turn on or off the nightlight.
3 Status check
Once you power on
both your baby unit and
parent unit, the parent
unit displays the current
room temperature, and
the baby unit’s power
indicator light turns on.
26
o
C
26
o
C
Caution
Keep the baby unit out of the reach
of your baby. Never place or mount
the baby unit inside the baby’s cot or
playpen.
Specifications are subject to change without notice.
© 2021 VTech Telecomunications Ltd.
All rights reserved. 08/21. DM1212_UK_QSG_V3
Technical specifications
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Baby unit: 1881.792 - 1897.344MHz
Parent unit: 1881.792 - 1897.344MHz
Maximum power used by the transmitter: 0.25W (250mW)
Channels 10
LCD 35 (x) x 21.2 (y) mm B&W LCD
Nominal effective
range
Actual operating range may vary according to environmental
conditions at the time of use.
Power requirements Parent unit: 2.4V Ni-MH battery
Baby unit power adaptor:
Output: 6V DC @ 400mA
Parent unit power adaptor:
Output: 6V DC @ 400mA
Manufacturer: VTech Telecommunications Ltd.
23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong.
Importer: VTech Electronics Europe Plc.
Napier Court, Abingdon Science Park, Abingdon, Oxon, OX14 3YT.
> 1 metre
< 1 metre
> 2 metres
< 2 metres
> 2 metres
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw VTech DM1212 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van VTech DM1212 in de taal/talen: Engels als bijlage per email.

De handleiding is 7.93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van VTech DM1212

VTech DM1212 Gebruiksaanwijzing - Deutsch - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info