1 Fit a dust bag by pushing it firmly onto the
black knob on the dust bag connector.
Push the shutter down so the hole is open
The dust bag has diagrams showing exactly how to fit it.
2 Push the connector into the slot in the dirty
water bucket
3 Push in the connector on the end of the hose.
Turn it clockwise to lock
4 Fit the cone filter unit and motor unit
Ensure the two retaining clips are secured.
You may have to push down hard on the edges of the
motor unit above the clips. They are a tight fit.
5 Join the extension tubes and fit them to
the hand grip
Close the regulator hole on the hand grip for maximum
suction.
6 Choose suction power
Vacuum carpets on high power.
Vacuum fabrics and upholstery on low power.
Make sure that the cable is fully unwound.
Put the plug into a wall socket.
7 Choose the right tool for the job
The smaller tools can be fitted to the back of your VAX
when you are not using them.
8 Switch ON
Push the button on the handle marked
for on, push again for off.
Tip
As your VAX is very powerful, you may find that the dust
bag fills up quickly the first time that you use your VAX.
8 steps for easy vacuuming
3
CREVICE TOOL
For cleaning in narrow gaps
DUSTING BRUSH
UPHOLSTERY TOOL
COMBINATION TOOL
Use with lever in this position for
vacuuming carpets.
COMBINATION TOOL
Use with lever in this position for
vacuuming hard floors.
