7. Return the filter to the top of the dirt container lid
by aligning the tabs and turning clockwise to lock
into position (Fig.6/6).
8. Return the filter shroud by aligning the smaller
tabs and turning clockwise to lock into position
(Fig.6/7).
9. Join the lid to the dirt container by aligning the
tabs and turning clockwise to lock into position
(Fig.6/8).
10. Place the dirt container back into the vacuum
cleaner body until it clicks into position (Fig.6/9).
Dirt Container & Filters: Removal & Replacement
6
Fig.6/8
Fig.6/9
Fig.6/6
Fig.6/7
3. Lift up the handle on the dirt container and turn
anti-clockwise to expose the filter housing
(Fig.6/3).
4. Remove the filter shroud by rotating it anti-
clockwise and pulling away from the dirt
container lid (Fig.6/4).
5. The HEPA filter can then be removed by rotating
it anti-clockwise and pulling away from the dirt
container lid (Fig.6/5).
6. Gently tap the filter against the side of a rubbish
bin to remove excess dirt.
NOTE: The filter and filter shroud may also be
washed by running it under the tap in lukewarm
(max 40ºC) water. Vax recommend washing the filter
once a month or when suction appears reduced.
Always allow the filter to air dry for 24 hours before
replacing into the cleaner.
Fig.6/5
Fig.6/3
Fig.6/4
