779224
5
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
8 9
24.01.2022
ENEN
e) In case of re, use a powder or carbon dioxide
(CO2) re extinguisher (one intended for use on
live electrical devices) to put it out.
f) Use the device in a well-ventilated space.
g) Please keep this manual available for future
reference. If this device is passed on to a third
party, the manual must be passed on with it.
h) Keep packaging elements and small assembly
parts in a place not available to children.
i) Keep the device away from children and animals.
j) If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
2.3. PERSONAL SAFETY
a) Do not use the device when tired, ill or under
the inuence of alcohol, narcotics or medication
which can signicantly impair the ability to
operate the device.
b) The device is not designed to be handled by
persons (including children) with limited mental
and sensory functions or persons lacking relevant
experience and/or knowledge unless they are
supervised by a person responsible for their
safety or they have received instruction on how to
operate the device.
c) To prevent the device from accidentally switching
on, make sure the switch is on the OFF position
before connecting to a power source.
d) The device is not a toy. Children must be
supervised to ensure that they do not play with
the device.
e) Do not put your hands or other items inside the
device while it is in use!
2.4. SAFE DEVICE USE
a) Do not use the device if the ON/OFF switch does
not function properly (does not switch the device
on and o). Devices which cannot be switched on
and o using the ON/OFF switch are hazardous,
should not be operated and must be repaired.
b) Disconnect the device from the power supply
before commencement of adjustment, cleaning
and maintenance. Such a preventive measure
reduces the risk of accidental activation.
c) When not in use, store in a safe place, away from
children and people not familiar with the device
who have not read the user manual. The device
may pose a hazard in the hands of inexperienced
users.
d) Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements
and for any other conditions which may impact
the safe operation of the device. If damage is
discovered, hand over the device for repair before
use.
e) Keep the device out of the reach of children.
f) Device repair or maintenance should be carried
out by qualied persons, only using original spare
parts. This will ensure safe use.
g) To ensure the operational integrity of the device,
do not remove factory-tted guards and do not
loosen any screws.
h) Do not move, adjust or rotate the device in the
course of work.
i) Clean the device regularly to prevent stubborn
grime from accumulating.
j) The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
k) Do not run the device when empty.
l) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
m) Keep the device away from sources of re and
heat.
n) Do not overload the device.
o) Do not cover the ventilation openings!
p) The tank should only be lled with cold water.
q) Overheating protection: The device switches o
when the temperature exceeds 160 °C.
r) Do not remove the upper cover while the device
is operating. Wait at least 10 minutes after
distillation is complete.
3. USE GUIDELINES
The device is designed to distill water.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use
of additional elements protecting the operator,
there is still a slight risk of accident or injury when
using the device. Stay alert and use common
sense when using the device.
2. Put the cover on. Make sure the silicone seal is
stretched properly over the entire ring before
putting the upper cover on.
3. Then connect the upper cover cable to the socket
in the bottom of the device.
4. Place the water container under the head as
shown on the gure below. Insert the plug of the
main power cord into an electrical socket.
5. Press the On/O button, the device starts
working. The fan starts automatically.
6. After approximately 30 minutes, water will begin
to drip into the container. The distillation of 4
liters of water takes approx. 4 hours. The device
will turn o automatically at the end of the cycle.
7. In the case the water conatiner is full and the
device still distills water, turn it o (disconnect the
power cord and auxiliary cord). Before starting
the next distillation, wait until the device has
completely cooled down.
3.4. CLEANING AND MAINTENANCE
a) Unplug the mains plug and allow the device to
cool completely before each cleaning, adjustment
or replacement of accessories, or if the device is
not being used.
b) Use only non-corrosive cleaners to clean the
surface.
c) After cleaning the device, all parts should be dried
completely before using it again.
d) Store the unit in a dry, cool place, free from
moisture and direct exposure to sunlight.
e) Do not spray the device with a water jet or
submerge it in water.
f) Do not allow water to get inside the device
through vents in the housing of the device.
g) Clean the vents with a brush and compressed air.
h) The device must be regularly inspected to check
its technical eciency and spot any damage.
i) Use a soft, damp cloth for cleaning.
j) Do not use sharp and/or metal objects for
cleaning (e.g. a wire brush or a metal spatula)
because they may damage the surface material of
the appliance.
k) Do not clean the device with an acidic substance,
agents of medical purposes, thinners, fuel, oils
or other chemical substances because it may
damage the device.
l) Every two weeks the container should be cleaned
of sediment using a cleaning agent (the treatment
should be performed in accordance with the
recommendations of the manufacturer of the
cleaning agent) or citric acid.
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher
than 40°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which
the device is being used. There should be at least 10
cm distance between each side of the device and the
wall or other objects. Keep the product away from
hot surfaces. The device should always be used when
positioned on an even, stable, clean, reproof and dry
surface, and be out of the reach of children and persons
with limited mental and sensory functions. Position the
device such that you always have access to the power
plug. The power cord connected to the appliance must
be properly grounded and correspond to the technical
details on the product label.
3.3. DEVICE USE
CAUTION: During the rst distillation process, the
device will be cleaned of contamination resulting from
transport. Water obtained from the rst distillation
process should not be used.
1. Remove the upper cover of the distiller and ll it
up with cold water to the maximum level (Caution:
do not overll the container). CAUTION: Do not ll
the distiller with hot water!
8
2
3
76
14
5
1. ON/OFF button
2. Upper cover
3. Housing
4. Indicator light
5. Trigger overlay
6. Container
7. Upper cover power cord
8. Main power cord
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Uniprodo Uni WD 250 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Uniprodo Uni WD 250 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 0.74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info