Listening to AM/FM Channels
Listening to AM/FM Channels
To listen to AM/FM channels, slide the
mode selector to AM/FM. Then, press the
button at the top of the scanner to select
the desired source (AM for AM Broadcast,
FM1 or FM2 for FM Broadcast).
Directly Selecting a Channel
Press STEP/DIR to select the direct entry
mode. Use the ▲/▼ buttons to step through
the selected band. The scanner stops on
active channels.
You can also enter the channel frequency
using the keypad, enter the channel
frequency (for FM or AM) and press E.
Using AM/FM Memory
Your scanner has 30 AM/FM memories for
quick channel recall. To store a channel into
memory, first select the band (AM, FM1 or
FM2). Then, directly select the channel you
want to store (see above). While listening
to the channel, press and hold the number
button that corresponds to the memory you
want to save the channel into for 2 seconds.
The scanner switches to the Memory mode
for the current band.
To quickly recall a channel, select the band, select the channel memory
mode by pressing PRI/MEM, then tap the number button that corresponds
to the memory where the channel is stored.
