Introduction
12 SEARCH/AM — In Scanner mode press to start a Limit Search or to resume
searching. In AM/FM mode, press to select the AM memory bank.
13 L/O/FM1
— In Scanner mode, press to lock or unlock a channel memory in
SCAN (HOLD) or PROGRAM mode.
In Search mode, press to set or clear a selected frequency previously locked
out in the LIMIT SEARCH. In AM/FM mode, press to select the FM1 memory
bank.
14 DELAY/FM2
— In Scanner mode, press to turn the delay option on/off. In AM/
FM mode, press to select the FM2 memory bank.
15 PRI/MEM
— In Scanner mode, press to set a Priority channel for Scan Hold
mode and Program mode.
In Program mode, press to set the Priority channel setting. In SCAN and SCAN
HOLD modes, press to set Priority Scan on or off.
In AM/FM mode, press to select Memory Mode to allow quick channel recall
using the 0-9 keys.
16 STEP/DIR
— Press STEP/DIR in scanner mode to go to select step menu.
Press STEP/DIR to change the step in select step menu. Press STEP/DIR in
radio mode to go to direct entry mode.
17 MODE
Switch — Use to select the desired mode: AM/FM; Aircraft; Scanner.
(Slide switch must be set to Clock)
18 ▼ — Press and release to move down through channel numbers in the
following HOLD modes: SCAN, PROGRAM and Aircraft Band Search, or the
step frequency in LIMIT SEARCH, and AM/FM mode. (refer to the frequency
and step table on page 7)
Press and hold for more than 1 second to have the changes run continuously.
19 ▲ — Press and release to move up through channel numbers in the following
HOLD modes: SCAN, PROGRAM and Aircraft Band Search, or the step
frequency in LIMIT SEARCH, and AM/FM mode. (refer to the frequency and
step table on page 9)
Press and hold for more than 1 second to have the changes run continuously.
20 HEADPHONE Jack
— lets you use an headphone for private listening.
21 Antenna Connector
— connect an external antenna using a BNC connector.
AM RADIO ANT connector — connect the supplied loop antenna and position
it for best AM Broadcast radio reception.
