Features
Channel Memory Scanning — Scans frequencies you have stored in any
of the channels or banks at a rate of 50 channels per second.
Memory Availability — Store and then scan any of up to 300 channels
distributed over 10 banks.
Direct Channel Access — Press 0 − 9 and HOLD to directly access any
stored frequency.
Channel Lockout/Frequency Lockout — Skip over stored frequencies
(channels) using the Lockout feature to enable faster scanning. Lets you
designate up to 50 frequencies each to skip during a search (limit or
Aircraft) to increase the scanning speed.
Alarm Clock with Snooze — provides standard radio broadcasts that you
can set as your alarm sound.
AM/FM — lets you store up to 30 preset broadcast channels (10 AM and
20 FM) for quick access.
Priority Channel — Designate a specific frequency as a Priority Channel.
Then the radio scans and checks that channel every 2 seconds. Select
and designate up to 10 frequencies as Priority Channels (one per bank).
Duplicate Channel Alert — Lets you know that a selected frequency has
already been programmed into memory if you attempt to store it again.
Limit Frequency Searching — Lets you designate lower and upper
frequency range and search within that range for active frequencies.
You can then store frequencies in memory as channels for later recall.
Aircraft Band Search — Lets you designate the preprogrammed Aircraft
Band channels to search.
Scan and Search Speed
• Scan Speed 50 channels per second maximum in SCAN MODE.
• Search Speed 50 steps per second maximum in SEARCH MODE.
• TURBO MODE For frequency steps 5kHz apart, searching occurs in
Turbo Mode which is 150 steps per second.
Introduction
