Programming from SEARCH Mode:
For example, when you find an interesting active frequency
while searching 144 - 148 band, and want to program it into
the Private bank (see "Band Search" on page 22 to search a
frequency):
1. Press
[HOLD]. “HOLD”
appears in the display.
2. Press
[PROG]. CH appears
and blinking to indicate that
you are in the programming
mode. To change the displayed
frequency, use
[UP] or
[DOWN] while “CH” is blinking.
3. Press
[PRIVATE]. “PRIVATE”
icon appears in the display.
If you want to program it into
another bank, press the
desired bank key. The lowest
open channel appear on the
display.
2 screens alternate to indicate
that open channel is available
to be programmed.
The scanner automatically
selects the lowest open
channel (000.0000) for easy
programming. If all channels
have been programmed (there
are no open channels in the
bank), channel 1 appears.
Use
[UP] or [DOWN] to select
a new channel and even over-
write old channels.
4. Press
[PROG] to store the
frequency in the desired
channel.
Note: Press [BAND] to escape
from programming mode before
step 4.
26
