59
Enabled search bands appear on the lowest line. Disabled
search bands are not displayed. The currently searched bank
number ashes.
• To turn Close Call bands on or o, use the number keys (1-5)
on the keypad.
One search band must always be enabled. If you turn o all
search bands, the scanner will display All Band Off!
• To hold on a specic band, press Hold. Turn SCROLL
CONTROL and select the band to monitor.
When the scanner nds a frequency, CCFOUND! appears in
the display. The scanner will also beep or ash the display (if
enabled) in the Close Call Alert option in the Close Call menu.
• Press any key (other than Hold) to view the displayed
frequency.
While monitoring a Close Call transmission, the scanner displays
Close Call on rst line and the monitoring frequency on the
second line.
The modulation and any CTCSS/DCS received (if enabled) will
also appear on the display.
Numbers at the bottom of the display show the enabled Close
Call bands. The currently searched band number ashes.
When the transmission ends, the scanner resumes searching
according to the delay setting.
To hold on a frequency, press Hold.
To start a Quick Search at the current frequency, turn the
SCROLL CONTROL in Hold mode and press Hold to start
searching.