40
• CTCSS - the scanner prompts the user for the
appropriate tone. Squelch will open for this channel only
if the tone matches.
• DCS - the scanner prompts the user for the appropriate
code. Squelch will open for this channel only if the code
matches.
• CTCSS/DCS Search - the scanner displays any tone/
code being used, but opens squelch on any signal.
• No Tone - indicates that the channel squelch will only
open if no CTCSS/DCS is detected.
• <Back - returns to Channel Menu.
Note: If you select Off, CTCSS/DCS Search, or No Tone,
the scanner returns to the channel menu. If you selected
CTCSS or DCS, you can then select the CTCSS tone or
DCS code.
5. Scroll to select, then press Pgm/E to save and return to the
Channel menu.
SETTING CHANNEL MODULATION
1. To select a channel, press Hold and then enter the channel
number.
2. Press Pgm/E to enter the Channel menu. (You can also
press Hold and scroll to the channel; press Func then
Pgm/E.)
3. Scroll to select Set Modulation and press Pgm/E.
4. Scroll to select modulation from the following options
(Default = Auto):
