805629
9
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
EN-7
Filling the water tank
Option 1:
To add water to the water tank (13), hold the device at a 45° angle. Open the water tank cap (11) by turning
it counterclockwise. Fill the measuring cup (J) with clean water. Add water into the water tank (13)
and then close the water tank cap (11) once the tank has been filled to the maximum level by turning it
clockwise.
Option 2:
Remove the water tank (13) from the main body (A) by pressing the water tank buttons (12).
Open the water tank cap (11) by turning it counterclockwise. Add water into the water tank (13) by holding
the water tank under the running water tap or by using the measuring cup (J). Close the water tank cap
(11) once the tank has been filled to the maximum level by turning it clockwise. Then insert the water tank
back by pressing it in the main body (A) until you hear a click.
Note! When the water tank is full, it can work up to approximately 20 minutes.
Filling the detergent tank
Open the cap of the detergent tank (14) by turning it counterclockwise, and add the detergent.
Then close the cap of the detergent tank (14) by turning it clockwise.
Press the detergent ON/OFF button (15) if you want to use detergent during cleaning, for instance when
the object to be cleaned is stained with grease or oil.
When the detergent ON/OFF button (15) is low, the detergent is ON
When the detergent ON/OFF button (15) is high, the detergent is OFF
Power ON/OFF
Make sure the power ON/OFF switch (7) is in the o “O” position.
Once the device is fully assembled and the water tank has been filled with water, fully unwind the power
cord (6) and plug it into a grounded socket.
To power ON the device, press the power ON/OFF switch (7) to the on “I” position. The LED indicator lights
(9) will turn red at each side of the water tank (13), indicating it is preheating.
Note: It is normal for a little bit of water to be ejected from the nozzle before steam starts to appear.
It takes ± 20 seconds to preheat. When the LED indicator lights (9) in the water tank light up blue, the mop
emits steam automatically and is ready for use.
To power OFF the device, press the power ON/OFF switch (7) to the o “O” position.
Note! When powering ON the device it will always automatically start prehearing.
Steam control
You can control the emitted steam level by turning the steam control knob (10).
• Turn the steam control knob (10) clockwise to increase the emitted steam
• Turn the steam control knob (10) counterclockwise to decrease the emitted steam
Slowly pass over the intended surface. It is recommended to sweep or vacuum the floor prior to using the
device.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Umuzi Cleaning UZ-CL-STCL01 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Umuzi Cleaning UZ-CL-STCL01 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 3.28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info