- Touch the screen (if currently in idle mode) to exit from the idle mode. If the display currently is not in
idle mode, skip this step.
- Tap on to enter the temperature menu
- Tap on to enter the main menu
- Tap on to enter the settings menu
- Navigate to the ''Screen lock'' by tapping on and/or
- Tap on ''Screen lock'' to switch between screen lock - OFF, screen lock - Lo and screen lock – Hi.
Using the display cleaning function
Fumis Premium includes a functionality, which makes the display inactive for 30 seconds. This allows you to
clean the display easier (if needed), because you prevent accidental changes to the settings.
If the default 30 seconds are not enough to clean the display, you can reactivate the ‘’Display cleaning‘’
function.
To use the display cleaning function, follow the steps below:
- Touch the screen (if currently in idle mode) to exit from the idle mode. If the display currently isn’t in
idle mode, skip this step.
- Tap on to enter the temperature menu
- Tap on to enter the main menu
- Tap on to enter the settings menu
- Navigate to the ''Display cleaning'' by tapping on and/or
- Tap on ''Display cleaning'' to enter into the Display cleaning menu
- Tap on ''START'' icon to start the 30 seconds countdown
Note
If the heating device turns on automatically (by timer, room thermostat, etc.), the cleaning function gets
interrupted in the moment when the heating device turns ON.
The display cleaning function cannot be activated during the operation of the heating device.
Setting the language
Fumis Premium allows you to choose between different languages.
To set the desired language, follow the steps below:
