34
4 TEC Functions during the dive with microbubble levels
V UWATEC
®
Aladin
®
dive computers
5 Complete a dive with MB levels
A dive with MB levels is completed the same way as a dive without MB levels
(L0) (->25), save for the following exceptions:
If the MB level has been reduced during the dive, Aladin
®
TEC will display a flas-
hing MB level symbol and the current MB level for five minutes after reaching
the surface. The dive is then completed and Aladin
®
TEC changes to user mode
with the MB level switching back to the original MB setting.
Repetitive dives and microbubble levels: If during a dive a level stop is being
ignored and the diver starts another descent shortly afterwards, Aladin
®
TEC
might immediately request level stops. To complete the dive with the initially set
MB level all level stops must be observed.
4.4 Level stop and deco stop
When the level stop depth equals the depth of the first obligatory decompression stop and if you are wit-
hin 1.5m/5feet of the stop depth itself, Aladin
®
TEC shows and (level stop). The indicated dura-
tion refers to level stop duration.
Since level stops are more restrictive than decompression stops, when all decompression obligations have
been observed the display changes from to only.
