80
1 Maintenance of Aladin
®
Pro Ultra Dive Computer
IX Uwatec
®
Aladin
®
Pro Ultra
Your Aladin
®
Pro Ultra is virtually maintenance free. All you need to do is to rinse it carefully with fresh
water after each use and to have the batteries changed when needed. To avoid possible problems with
your Aladin
®
Pro Ultra, the following recommendations will help assure that it will give you years of
trouble free service:
• Avoid dropping or jarring your Aladin
®
Pro Ultra.
• Do not allow your Aladin
®
Pro Ultra to be exposed to direct, intense sunlight.
• Rinse your Aladin
®
Pro Ultra thoroughly with fresh water after each dive.
• Do not store your Aladin
®
Pro Ultra in an gas mixture-tight area; make sure
there is free ventilation.
• If there are problems with operating the contacts, the surface of your Aladin
®
Pro Ultra housing can be treated with silicone grease. Use soapy water to clean
the Aladin
®
Pro Ultra before using silicone grease and dry it thoroughly.
• There are borings in two of the contacts for the reception of the PC interface
connection (MemoMouse). Free these borings from dirt with a needle if neces-
sary.
Take the dive computer to an authorized Uwatec dealer in order to change
the batteries. The actual change of the batteries is made at the manufactu-
rer or the importer. The computer is checked for its technical functioning at
the same time. Do not attempt to have the batteries changed by anyone
other than an authorized dealer.
