557352
4
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
Rapid Exhaust feature is a standard item on the TUSA B.C.J.’s allowing the diver to
vent air rapidly from the B.C.J.
Procedure for activating valve is as follows:
1. Pull gently on forward Inflator Assembly to activate
Exhaust Valve. Maintain forward pressure until enough
air has been exhausted to reach desired buoyancy.
Release pressure to close valve.
6 7
GB
To Your Regulator
HAND-SCREW in threaded end of the QD Hose into Low Pressure Port of Regulator.
Tighten gently but firmly with a 15mm hexagonal key. The threaded connection of
the QD hose to the pressure reducer is a standardized connection 3/8" UNF. Please
refer to the User’s Manual of your regulator for identification of LP outlets.
Check your system before dive: a low pressure gauge connected to LP Ports must
not read over 1.2MPa (12bar), and under 0.8MPa (8bar) if tank is full.
It is recommended that your TUSA dealer installs your QD Hose on your regulator.
WARNING: Do not connect QD Hose to Regulator High Pressure(H.P.) Port.
Injury to diver and equipment may result.
To Your B.C.J. (Fig. 1)
Connect QD Hose Inflator by pulling Quick-Disconnect Collar back with thumb and
forefinger, while pushing Hose Coupling onto Inflator Plug. Release Collar when
Coupling is engaged fully. Pull gently but firmly on Hose to check if Coupling is
securely joined to Plug. To disconnect Inflation Hose from Inflator, pull Quick-
Disconnect Collar back and disengage Coupling from Plug
(Fig. 1)
Attach the “Low
Pressure Quick
Disconnect Hose”
to the inflator plug.
(Fig. 2)
Secure the airway
together with QD
Hose to the Hock &
Loop hose retainer.
(Fig. 7)
Rapid Exhaust Deflation (Fig. 7)
B.C.J. DEFLATION
AIRWAY SYSTEM
Airway Systems are standard on all TUSA B.C.J. ’s
Low Pressure Quick Disconnect(QD) Hose Installation
Setting the low pressure hose (APA type)
Connect the plug for the coupler for the regulator BCJ low pressure hose, then fit in
the low pressure hose in the groove on the side of the inflator hose as in Photographs
3 and 4. This arranges the hose neatly and makes it easier to handle and makes it
easier to mount and remove the BCJ.
Inflator setting position (APA type)
The recommended APA inflator setting position is the same as for a regular inflator.
(Fig. 5)
Of course, normal exhaust operations and use of the Rapid Exhaust Deflation by
pulling the APA inflator main unit are both possible. When primarily using the rapid
exhaust function with the APA exhaust button, there is also an APA inflator setting
position that uses the BCJ hose holder to fasten with the APA exhaust button right at
hand. (Fig. 6)
(Fig. 5) (Fig. 6)
(Fig. 3) (Fig. 4)
BCJ(CE)002-021 GB 10.11.17 9:35 AM ページ 6
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tusa Buoyancy Compensator Jacket bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tusa Buoyancy Compensator Jacket in de taal/talen: Engels als bijlage per email.

De handleiding is 1,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info