ASSEMBLY OF THE VACUUM CLEANER
1. Insert the filter in the dust container
a. Place the cyclone insert in the dust container. Align the pins in
the cyclone insert with the cutouts in the dust container.
b. Place the HEPA filter in the cyclone insert.
2. Install the dust container in the motor unit
a. Place the dust container on the pins at the bottom of the
motor unit.
b. Push the dust container inwards so that it clicks into place.
3. Attach the battery to the motor unit
a. Snap the battery into the
battery compartment and then
push it into the motor unit until
you hear a click.
4. Mount the suction pipe and floor nozzle on the motor unit
a. Push the floor nozzle into the lower opening of the suction
i. pipe until it clicks into place.
b. Press the suction pipe into the connection opening of the
motor unit until it clicks into place.
Note: You can also insert the floor nozzle directly into the connection opening
