6. Then fix the front panel and the outside grid (the outside grid is not supplied, but it can be
purchased separately as an optional accessory).
B. WINDOW INSTALLATION
Before performing any cut, check if the window frames do not
obstruct the fan and keep in mind that there is necessary to
have enough space for fixing the fan casing.
Position the fan on the windowpane, mark it, then make the
appropriate cutout make the cutout with the diameter
corresponding to the outlet of your fan model.
1.
2.
Glass
1
3.Bring the cable from a 2-pole switch to the unit. The distance between the pins should be at least 3 mm.
4.Use glass glue (not included) to fix the fan body, following the instructions for use.
5. Apply glue on the entire edge, then fix the fan body to the glass.
103 mm for TREND 100
123 mm for TREND 120
153 mm for TREND 150
Glass
Glass
Glass
