681446
45
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
www.trust.com
SECURITY PLUS-LINE
ALKCT-2000
ALKCT2000 ARM/DISARM REMOTE CONTROL
Item 71115 Version 1.0
Visit www.trust.com
for the latest instructions
USER MANUAL
MULTI LANGUAGE
2
4
1
3
On
O
Red LED indicator
On
O
ON button
4 sec
OFF button
Arm
O
Short press
ON button
5
6
Arm
O
ON button
4 sec
On
O
1.5 sec
O
On
OFF button
4 sec
On
O
1.5 sec
7 8
9
On
O
ON button
OFF button
4 sec
O
On
OFF button
Short press
On
O
On
O
ON button ON button
4 sec 4 sec
OFF button OFF button
O
On
OFF button
1 sec
10 11
On
O
1
ALKCT-2000 ARM/DISARM REMOTE CONTROL
1. Place battery
Open the battery slot at the back of the ALKCT by sliding it down. Place the included 3V CR2477 battery
and potentially the keychain cord. Close the battery slot. For more information on replacing and
purchasing new batteries visit trust.com/71115
2. LED indicator
Low battery: LED will blink 2x when a button is pushed
Confirm pair/unpair: LED will blink 5x
Successful arm/disarm: LED will light for 1.5 sec
Unsuccessful arm/disarm: LED will blink shortly 3x
3. Activate the pairing mode
Consult the manual of the Siren to activate the pairing mode. Put the ALKCT in pairing mode by first
pressing the ON and OFF button simultaneously for 4 sec (untill the LED of the ALKCT starts blinking).
4. Confirm pairing
After entering pairing mode press the ON button shortly to pair with the Siren. The LED indicator of the
Siren and ALKCT will be flashing 5 times to confirm that the pairing has been done successfully.
5. Arm/Turn on the siren
To arm the siren press the ON button for 4 seconds on the ALKCT.
If the siren is armed successfully the LED of the ALKCT will light up for 1.5 sec.
6. Disarm/Turn o the siren
To disarm the siren press the OFF button for 4 seconds on the ALKCT.
If the siren is disarmed successfully the LED of the ALKCT will light up for 1.5 sec.
7. Activating the unpairing mode
Consult the manual of the Siren to activate the pairing mode. Put the ALKCT in pairing mode by first
pressing the ON and OFF button simultaneously for 4 sec (untill the LED of the ALKCT starts blinking).
EN
ALKCT-2000 ARM/DISARM REMOTE CONTROL
2
8. Confirm unpairing
After entering pairing mode press the OFF button shortly to unpair with the Siren. The LED indicator of
the Siren and ALKCT will be flashing 5 times to confirm that the unpairing has been done successfully.
9. Delete ALKCT memory
To delete the memory of the ALKCT press the ON and OFF button simultaneously for 4 seconds (untill
the LED starts to blink) Release the buttons and press the ON and OFF buttons simultaneously again
for 4 seconds. (untill the LED starts to blink fast). Press the OFF button shortly to delete the memory of
the ALKCT. The LED will blink 5x to confirm the memory has been deleted.
10. Mounting the holder
Mount the holder of the ALKCT on a flat surface and secure it with screws. (Mounting screws not
included)
11. Place ALKCT in holder
When the holder has been mounted and secured with screws place the ALKCT in the holder. To place
the ALKCT slide it in from top to bottom.
EN
3
ALKCT-2000 ARM/DISARM REMOTE CONTROL
DE
1. Einlegen der Batterie
Önen Sie das Batteriefach auf der Rückseite des ALKCT, indem Sie es nach unten ziehen. Legen
Sie die mitgelieferte 3V CR2477 Batterie und eventuell auch die Schnur des Schlüsselanhängers ein.
Weitere Informationen zum Austausch und Erwerb neuer Batterien finden Sie unter trust.com/71115.
2. LED-Kontrollleuchte
Batterie schwach: Die LED-Kontrollleuchte blinkt 2 Mal auf, wenn eine Taste gedrückt wird
Kopplung/Entkopplung bestätigen: Die LED-Kontrollleuchte blinkt 5 Mal auf.
Erfolgreiche Scharfstellung/Entschärfung: Die LED-Kontrollleuchte blinkt 1,5 Sek. lang
Nicht erfolgreich durchgeführte Scharfstellung/Entschärfung: Die LED-Kontrollleuchte blinkt 3 Mal kurz
auf.
3. Aktivierung des Kopplungsmodus
Zur Aktivierung des Kopplungsmodus nehmen Sie bitte Bezug auf die Bedienungsanleitung der
Sirene. Schalten Sie den ALKCT in den Kopplungsmodus, indem Sie die EIN- und AUS-Taste gleichzeitig
4 Sekunden lang drücken (bis die LED-Kontrollleuchte des ALKCT beginnt zu blinken).
4. Bestätigung der Kopplung
Nach Wechsel in den Kopplungsmodus drücken Sie kurz auf die ON-Taste, um eine Kopplung mit der
Sirene herzustellen. Die LED-Kontrollleuchte der Sirene und des ALKCT wird 5 Mal aufleuchten, um zu
bestätigen, dass die Kopplung erfolgreich durchgeführt wurde.
5. Sirene scharf stellen/einschalten
Zur Scharfstellung der Sirene drücken Sie 4 Sekunden lang die EIN-Taste auf dem ALKCT.
Wurde die Sirene erfolgreich scharf gestellt, leuchtet die LED-Kontrollleuchte des ALKCT 1,5 Sekunden
lang auf.
6. Sirene entschärfen/ausschalten
Zur Entschärfung der Sirene drücken Sie 4 Sekunden lang die AUS-Taste auf dem ALKCT.
Wurde die Sirene erfolgreich entschärft, leuchtet die LED-Kontrollleuchte des ALKCT 1,5 Sekunden lang
auf.
37
ALKCT-2000 ARM/DISARM REMOTE CONTROL
TR
1. Bataryayı yerleştir
ALKCT’nin arkasındaki batarya yuvasını aşağı doğru kaydırarak açın. Pakette bulunan 3V CR2477
bataryasını ve varsa anahtarlık kordonunu yerleştirin. Batarya yuvasını kapatın. Batarya değiştirme ve
yeni batarya satın alma konusunda daha fazla bilgi için trust.com/71115 adresini ziyaret edin.
2. LED göstergesi
Düşük batarya Bir düğmeye basıldığında LED 2 kez yanıp sönecektir
Eşleştirmeyi/ayırmayı onayla: LED 5 kez yanıp sönecektir
Etkinleştirme/etkisiz hale getirme başarılı oldu: LED 1,5 sn. yanıp sönecektir
Etkinleştirme/etkisiz hale getirme başarısız oldu: LED 3 kez kısa süreyle yanıp sönecektir
3. Eşleştir modunu etkinleştir
Eşleştir modunu etkinleştirmek için Siren’in kullanıcı kılavuzuna başvurun. ÖnceON ve OFF düğmelerine
aynı anda 4 saniye boyunca basmak suretiyle (ALKCT’nin LED’i yanıp sönmeye başlayıncaya kadar)
ALKCT’yi eşleştir moduna getirin.
4. Eşleştirmeyi onayla
Eşleştirme moduna girdikten sonra Siren’le eşleştirmek üzereON düğmesine kısa süreyle basın.
Siren ve ALKCT’nin LED göstergesi 5 kez yanıp sönerek eşleştirmenin başarılı olduğunu teyit eder.
5. Etkin mod/ Sireni Açma
Siren’i etkinleştirmek için ALKCT üzerindekiON düğmesine 4 saniye boyunca basın.
Siren başarılı bir şekilde etkinleştirilirse, ALKCT’nin LED’i 1,5 saniye boyunca yanacaktır.
6. Etkin mod/ Sireni Açma
Siren’i etkisiz hale getirmek için ALKCT üzerindeki OFF düğmesine 4 saniye boyunca basın.
Siren başarılı bir şekilde etkisiz hale getirilirse, ALKCT’nin LED’i 1,5 saniye boyunca yanacaktır.
45

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trust 71115 Remote Control ALKCT-2000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trust 71115 Remote Control ALKCT-2000 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info