489381
6
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
6
Installation of safety/drain valve
Fig. A + B
Install safety/drain valve (7) at a place which is easily accessi-
ble, near the water heater. Drill hole with 18 mm diameter and
pass through discharge socket with hose (8). Fasten safety/
drain valve with 2 screws. The draining is to be directly to the
outside (apply splash guard, if necessary).
Water pipe routing
1. Fig. A + B
Connect cold water supply (9) to safety/drain valve (7).
Direction of flow is unimportant.
2. Screw elbow with integrated breather valve (5) to hot wa-
ter connection pipe (upper pipe) and elbow without breather
valve (6) to cold water connecting pipe (lower pipe).
Slide on nut (10), tension ring (11) and O-ring (12). Assemble
screw connector and connecting pipe and fasten together
using nut (10).
Slide ventilation hose with 11 mm outer diameter (14) onto
the breather valve hose nozzle (15) and route towards the out-
side. Do not allow the radius of the arc to be less than 40 mm.
Direction of travel
Cut off the ventilation hose approx. 20 mm below the floor of
the vehicle at an angle of 45° to the direction of travel.
3. Fig. A + B
Produce hose connection (16) for cold water supply between
safety/drain valve (7) and elbow (6 – lower pipe) on boiler.
4. Route the hot water pipe (17) from the elbow with integrat-
ed breather valve (5 – upper pipe) to the hot water consumers.
Installation of the control panel
When using control panels which are specific to the
vehicle or the manufacturer, the electrical connection
must be established in accordance with the Truma interface
descriptions. Any modification made to the Truma compo-
nents pertaining to this will lead to the invalidation of the
guarantee, as well as to the exclusion of any claims for liabil-
ity. The installer (manufacturer) is responsible for providing
instructions for use for the user as well as for identification
printing on the control panels.
When selecting the location, observe the fact that the control
panel (20) is not to be exposed to direct heat radiation. The
length of the connecting cable is 2.5 m.
If flush mounting is not possible, Truma will supply an
on-surface frame (18 – part no. 40000-52600) as an
accessory on request.
Drill a hole with 55 mm diameter. Feed the cable (19) through
to the back and secure the control panel (20) with four
screws (21). Then fit the cover frame (22) on and lay the
cable (19) to the boiler unit.
Ø 55 mm
19
23
23
22
18
20
21
Truma offers side parts (22) in eight different colors for finish-
ing the cover frames (23) in a visually pleasing way. Please ask
your dealer.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Truma Elektroboiler bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Truma Elektroboiler in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Deens als bijlage per email.

De handleiding is 1,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Truma Elektroboiler

Truma Elektroboiler Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Espanôl, Dansk - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info