756394
16
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
16 EN
thermal imaging camera XC300 / XC600
Switching the laser pointer on or off
The integrated laser can be used as both a pure aid to
orientation and for aiming and a means to exactly measure the
distance between the IR camera and the object to be
thermographed.
Please proceed as follows to switch the laser pointer on or off:
Warning of laser radiation
Laser class2, Pmax.: <1mW, λ: 400-700nm,
EN60825-1:2014
Do not look directly into the laser beam or the opening
from which it emerges.
Never point the laser beam at people, animals or
reflective surfaces. Even brief eye contact can lead to
eye damage.
Examining the laser output aperture by use of optical
instruments (e.g. magnifying glass, magnifiers and the
like) entails the risk of eye damage.
When working with a laser of class2, observe the
national regulations on wearing eye protection.
üThe protective cover of the laser pointer(8) is opened by
swivelling it to the side by 180°.
1. Press the C button(17) on the control panel(2) or tap the
Trotec logo on the display(1).
ðThe main menu is displayed on the left-hand side of the
display.
2. Select the Settings menu.
3. Select the System menu.
4. Select the Control option.
5. Activate the laser permanently by sliding the selector
switch on the display to the right.
ðThe laser pointer is switched on and pulsates at regular
intervals.
ðThe Laser selector switch is highlighted in blue(ON).
ðAdditionally, a red cursor is displayed to mark the
target.
6. Deactivate the laser permanently by sliding the selector
switch on the display to the left.
Please observe that the integrated laser does not only
constitute a pure means for aiming or an aid to orientation,
but that it can also be utilized for carrying out an exact
measuring of the distance to the measuring object. If you
have programmed the laser function to the multifunction
button(5), you can activate or deactivate the laser by
pressing this button. Further information on the
multifunction button is provided in the chapter Configuring
the multifunction button. In the active state, the laser
pulsates at regular intervals, measuring the distance from
the camera to the measuring object in each case. You do
not have to press the trigger to carry out this process. The
distance measured is displayed at the lower right end of
the LCD screen and is also automatically updated in the
Global Parameters menu item.
7. Close the protective cover of the laser pointer(8).
Info
When the laser is not active, the distance to the
measuring object must be entered manually to obtain
measurement results that are as precise as possible.
Using the AV port
You can connect the device to a screen via an AV cable. The
image can be transmitted in PAL or NTSC format.
1. Press the C button(17) on the control panel(2) or tap the
Trotec logo on the display(1).
ðThe main menu is displayed on the left-hand side of the
display.
2. Select the Settings menu.
3. Select the System menu.
4. Select the Control menu.
5. For the option TV-Out Mode select the desired format PAL
or NTSC.
6. Enable the TV-Out option by sliding the selector switch to
the right.
ðThe TV-Out selector switch is highlighted in blue (ON).
ðThe TV output is activated.
7. Open the sealing cap at the AV output(3).
8. Schließen Sie das beiliegende bzw. ein geeignetes
AV-Kabel am Gerät an und verbinden Sie es mit dem
Bildschirm.
Switching the device off
1. Press and hold the Power button(13) for approx. 3s.
2. Confirm the prompt with OK.
ðThe message "power off" is displayed and the camera
switches off after a few seconds.
3. Close the display(1).
4. Fix the protective cap to the IR lens(10).
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trotec XC600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trotec XC600 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Trotec XC600

Trotec XC600 Gebruiksaanwijzing - Nederlands - 32 pagina's

Trotec XC600 Gebruiksaanwijzing - Deutsch - 33 pagina's

Trotec XC600 Gebruiksaanwijzing - Français - 33 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info