753362
5
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
EN 5
cordless polisher PPOS 10-20V
Device-specific safety warnings for polishing
machines
Do not use accessories which are not specifically
designed and recommended by the tool manufacturer.
Just because the accessory can be attached to your power
tool, it does not assure safe operation.
Hold onto the power tool with both hands. Position
your arms and your body in a way that allows you to
have the greatest control possible in order to absorb
kickback forces and reaction torques at high rotational
speeds.
Never lay the power tool down until the accessory has
come to a complete stop. The spinning accessory may
grab the surface and pull the power tool out of your
control.
Do not run the power tool while carrying it at your
side. Accidental contact with the spinning accessory could
snag your clothing and entangle the accessory in your
clothing.
Use special care when working corners and sharp
edges. Avoid the accessory bouncing or getting stuck
in a corner. The result would be a loss of control or
kickback.
Do not position your hand in the area next to the
rotating polishing wheel. In the event of a loss of control
or kickback, the rotating polishing wheel can hit your hand
and cause injuries.
Make sure that the polishing bonnet is well attached
on the polishing disc. A loose polishing bonnet can slip
from the polishing disc, get entangled with your hand and
cause injuries.
Only switch on the polishing machine once the
polishing disc completely rests on the area to be
polished.
Do not use abrasives. Abrasives can damage the paint.
Dust particles hazardous to health can be
released during dry polishing. Always wear a
suitable dust mask to protect you from inhaling dust
particles.
Safety Warnings Specific for Polishing Operations
Make sure that no loose parts of the polishing bonnet, in
particular its attachment strings, spring freely. Clamp the
attachment strings or cut them to length. Loose and spinning
attachment strings can entangle your fingers or snag on the
workpiece.
Intended use
Only use the device PPOS 10-20V:
for treating and refurbishing cars, boats, caravans,
motorcycles, floors or furniture.
for polishing, waxing or dewaxing painted or chromium-
plated areas.
We recommend using the power tool with original Trotec
accessories.
Foreseeable misuse
The device is not suitable for grinding, sanding, wire brushing or
working with cutting wheels.
Any other use than the one described in the chapter "Intended
use" is regarded as reasonably foreseeable misuse.
Personnel qualifications
People who use this device must:
have read and understood the instructions, especially the
Safety chapter.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trotec PPOS10-20V bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trotec PPOS10-20V in de taal/talen: Engels als bijlage per email.

De handleiding is 2,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Trotec PPOS10-20V

Trotec PPOS10-20V Gebruiksaanwijzing - Nederlands - 15 pagina's

Trotec PPOS10-20V Gebruiksaanwijzing - Deutsch - 15 pagina's

Trotec PPOS10-20V Gebruiksaanwijzing - Français - 15 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info