689480
11
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
EN 10
300W multi-function tool PMTS 10-230V
5. Fold back the tool release lever(1).
1
6. Check whether the tool is properly locked in place.
Oscillation rate selection
The required oscillation rate depends on the material and the
operating conditions and can be determined by way of field-
testing. For sawing, cutting and grinding harder materials such
as wood or metal we recommend oscillation rate 6, in case of
softer materials, e.g. plastics, best use oscillation rate 4. The
setting range covers the levels 1 - 6 (15,000 - 21,000rpm). You
can change the preselected oscillation rate at any time.
1. Turn the setting wheel(3) to the desired oscillation rate.
3
Connecting the power cable
Insert the mains plug into a properly secured mains
socket.
Operation
Tips and notes on handling the multi-function tool
General information:
Keep the venting slots clear to prevent the motor from
overheating.
Check the tool in the tool holder for proper fit before every
application. The tool must be firmly locked in place in the
designated holding fixtures in the tool holder.
Before every application, make sure that you have selected
the correct tool for the intended use.
Sawing:
Only use intact, flawless saw blades. Bent, blunt or
otherwise damaged saw blades could break.
When sawing lightweight construction materials, make
sure to observe the legal regulations and
recommendations of the material manufacturers.
Only soft materials such as plasterboard or the like may be
processed using the plunge-cutting method!
Before sawing wood, chipboards, building materials etc.
with HCSblades, check the above for foreign objects, e.g.
nails, screws or similar. If required, remove the foreign
objects or use bi-metal saw blades.
Use a narrow saw blade when sawing tight curves.
The saw blade should not be longer than required for the
intended cut.
Cutting:
Only use intact, flawless cutting blades. Bent, blunt or
otherwise damaged cutting blades could break.
When cutting wall tiles, bear in mind that the insertion
tools are subjected to a high level of wear during longer
operation.
Scraping:
Choose a high oscillation rate for scraping.
On soft ground (e.g. wood) work at a shallow angle and
with only little contact pressure. Otherwise the scraping
knife could cut into the ground.
Sanding:
Maintain a consistent grinding pressure to increase the
lifetime of the sanding sheets.
Choose from the different sanding sheets (red for wood,
black for metal) in due consideration of the material to be
processed and the desired surface abrasion.
Avoid the accumulation of dust at the workplace, always
use a dust extraction system when grinding.
Use the coarse triangular sanding sheets (e.g. 60 grit) for
rough grinding and the fine ones (e.g. 240 grit) for fine and
finish grinding.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trotec PMTS10 - 230V bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trotec PMTS10 - 230V in de taal/talen: Engels als bijlage per email.

De handleiding is 1,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Trotec PMTS10 - 230V

Trotec PMTS10 - 230V Gebruiksaanwijzing - Nederlands - 19 pagina's

Trotec PMTS10 - 230V Gebruiksaanwijzing - Deutsch - 20 pagina's

Trotec PMTS10 - 230V Gebruiksaanwijzing - Français - 19 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info