689435
11
Verklein
Vergroot
Pagina terug
1/21
Pagina verder
EN 11
local air conditioner PAC 3900 X
2. Press the Speed button(23) to set the desired fan stage.
ð The fan speed LED(18) indicates the selected fan stage.
When the automatic stage is activated, none of the fan
speed LEDs(18) is illuminated.
ð The Fan LED(14) will be illuminated to indicate
ventilation mode.
Automatic operation
In automatic operation mode the cooling or ventilation process
will be regulated depending on the ambient temperature and the
target temperature.
1. Press the Mode button(26) until the Auto LED(14) is
illuminated.
ð If the difference between the ambient and target
temperature is ≥2°C, the device automatically
switches over to cooling operation. The LEDs Auto(14),
Cool(14), On/ Off(20) and possibly Degrees
Celsius(16) are illuminated. When combining automatic
and cooling operation, the fan speed is regulated
automatically.
ð If the difference between the ambient and target
temperature is <2°C, the device automatically
switches over to fan operation. The LEDs Auto(14),
Fan(14) and possibly Degrees Celsius(16) are
illuminated. When combining automatic and fan
operation, the fan speed is regulated automatically.
Setting the timer
The timer has two modes of operation:
automatic switch-on upon expiry of a preset number of
hours.
automatic switch-off upon expiry of a preset number of
hours.
This setting can be made at the device or using the remote
control.
Automatic switch-on and automatic switch-off may be enabled
at the same time. The Timer LEDs(13) on the control panel will
then be illuminated simultaneously. When using the remote
control for setting, Timer On and Timer Off(35) will additionally
be shown on the display(30) simultaneously.
The function can be set in all operating modes and also during
stand-by.
The number of hours can be set in increments of 0.5hours
(0.5h to 10h) or in increments of 1hour (10h to 24h).
Note
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
Automatic switch-on
ü The device is switched off.
1. Press the Timer button(27) until the Timer On LED(13) is
illuminated.
2. Set the desired number of hours by use of the Increase
value(24) and Decrease value(25) buttons.
ð The number of hours will be indicated on the segment
display(15) for approx. 5s.
ð The timer setting equals the desired number of hours.
ð After the predefined time, the device switches itself on.
Notes regarding automatic switch-on:
If the device is disconnected from the power supply, all
settings for automatic switch-on are deleted.
Manually switching the device on disables the automatic
switch-on function.
If you select 0hours, the timer will be off.
Automatic switch-off
ü The device is switched on.
1. Press the Timer button(27) until the Timer Off LED(13) is
illuminated.
2. Set the desired number of hours by use of the Increase
value(24) and Decrease value(25) buttons.
ð The number of hours will be indicated on the segment
display(15) for approx. 5s.
ð The timer setting equals the desired number of hours.
ð After the predefined time, the device switches itself off.
Notes regarding automatic switch-off:
Pressing the On/ Off button(21) deactivates the automatic
switch-off function.
Night mode
Night mode can be activated in cooling mode and during
automatic operation.
Night mode comes with the following settings:
After 1 hour the preset temperature is increased by 1°C.
After another 30minutes the preset temperature will again
be increased by 1°C. Then the temperature is kept
constant for 7hours before the device sets the original
temperature automatically.
In automatic mode, the fan speed is preset to the lowest
stage and cannot be adjusted. In cooling mode, the fan
speed can be changed, which disables night mode.
To activate night mode, please proceed as follows:
1. Select cooling mode or automatic operation.
2. Press the Sleep button(22).
ð The Operating mode(14) and Sleep LEDs(19) light up.
3. In order to switch the night mode off, press the Sleep
button(22) once again.
ð The Sleep LED(19) turns off.
ð The selected operating mode remains active.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Trotec-PAC3900X

Zoeken resetten

  • ik heb mijn nieuwe trotec 3900X gisteren ontvangen (via Internet gekocht). Bovenop zit een klep die er los bijzat. Weet iemand hoe ik die klep gemonteerd krijg. Ik heb zelf gekeken maar ben bang dat het alleen met grof geweld kan. Dat kan toch nooit de bedoeling zijn? Wie o wie kan mij helpen? Gesteld op 23-6-2021 om 12:15

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trotec PAC3900X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trotec PAC3900X in de taal/talen: Engels als bijlage per email.

De handleiding is 2,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Trotec PAC3900X

Trotec PAC3900X Gebruiksaanwijzing - Nederlands - 23 pagina's

Trotec PAC3900X Gebruiksaanwijzing - Deutsch - 22 pagina's

Trotec PAC3900X Gebruiksaanwijzing - Français - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info