688783
13
Verklein
Vergroot
Pagina terug
1/21
Pagina verder
EN 13
local air conditioner PAC 2100 X / PAC 2600 X
Setting the timer
The timer has two modes of operation:
automatic switch-on upon expiry of a preset number of
hours
automatic switch-off upon expiry of a preset number of
hours
The timer can be programmed in increments of 0.5hours
(0 to 10h) or in increments of 1hour (10 to 24h).
This setting can only be made using the remote control.
The function can be set in all operating modes. It can be
activated both during operation and in standby mode.
Automatic switch-on and automatic switch-off may be enabled
at the same time. If so, Timer On and Timer Off will both be
displayed simultaneously.
Note
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
Automatic switch-on
ü The device is switched off.
1. Press the TIMER ON button(21) to activate the timer.
2. Hold or repeatedly press the TIMER ON button(21) to
select the desired number of hours until automatic
switch-on.
3. Wait for 3seconds to confirm the setting.
ð The number of hours until automatic switch-on will be
indicated for approx. 3s both on the display(19) and
the segment display(15).
ð The Timer On setting will also be indicated on the
display(19).
ð A dot will be indicated in the bottom right corner of the
segment display(15).
ð After the predefined time, the device switches itself on.
Notes regarding automatic switch-on:
If the device is disconnected from the power supply, all
settings for automatic switch-on are deleted.
Manually switching the device on disables the automatic
switch-on function.
If you select 0hours, the timer will be off.
Automatic switch-off
ü The device is switched on.
1. Press the TIMER OFF button(22) to activate the timer.
2. Hold or repeatedly press the TIMER OFF button(22) to
select the desired number of hours until automatic
switch-off.
3. Wait for 3seconds to confirm the setting.
ð The number of hours until automatic switch-on will be
indicated for approx. 3s both on the display(19) and
the segment display(15).
ð The Timer Off setting will also be indicated on the
display(19).
ð A dot will be indicated in the bottom right corner of the
segment display(15).
ð After the predefined time, the device switches itself off.
Automatic operation
During automatic operation cooling and ventilation are regulated
depending on the ambient and target temperature.
This setting can only be made using the remote control.
1. Use the MODE button(27) to select Auto mode.
ð Auto mode is displayed in the operating mode
indication(35).
Night mode
Night mode can be activated in cooling mode and during
automatic operation.
This setting can only be made using the remote control.
Night mode comes with the following settings:
After 30minutes the preset temperature is increased by
1°C. After 1hour the preset temperature will again be
increased by 1°C. Then the temperature is kept constant
for 7hours.
Subsequently, the device switches back to the preset
temperature from before night mode.
Ventilation is preset to the automatic stage and cannot be
adjusted.
To activate night mode, please proceed as follows:
1. Select cooling mode or automatic operation.
2. Press the SLEEP button(24).
ð Both the night mode and the automatic stage will be
indicated on the display(19).
3. In order to switch the night mode off, press the
SLEEP button(24) once again.
ð The night mode indication(32) disappears.
ð The automatic stage remains unaffected.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trotec PAC2100X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trotec PAC2100X in de taal/talen: Engels als bijlage per email.

De handleiding is 0,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Trotec PAC2100X

Trotec PAC2100X Gebruiksaanwijzing - Nederlands - 22 pagina's

Trotec PAC2100X Gebruiksaanwijzing - Deutsch - 22 pagina's

Trotec PAC2100X Gebruiksaanwijzing - Français - 23 pagina's

Trotec PAC2100X Gebruiksaanwijzing - Espanõl - 23 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info